HP Wireless connnectio​n not working

I'm running WIndows 7 and had some Windows updates over the weekend, and now my laptop isn't communicating with my HP Office Jet Pro 8500. Downloaded the latest driver from HP, but still not working. Any ideas on a next step?

Before downloading the driver, was the printer uninstalled?
What brand and model is the router?
To confirm, is this the OfficeJet pro 8500 and not the 8500A?
Do you receive any error messages?  If so, what are they?
What is the status of the printer in Devices in Printers?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

  • How do I correct the "Wireless Radio is not working" problem on my Photosmart C410 Printer?

    HP Photosmart Prem C410a All-in-One
    Windows 7 64-bit
    Wireless Radio is not working
    Trying to change from USB to wireless setup
    purchased at Staples on 8/19/2010 - means warrenty has expired

    With the printer ON, unplug power from the back of the printer for 30 seconds.  Does that reset the radio?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • HT3917 My apple wireless keyboard is not working after new batteries installed

    My apple wireless keyboard is not working after new batteries installed.

    Do you get a steady green light to say there is a connection.    If not, are the batteries the right way round.   Do you have a monitor to tell the batteries strength. Is there a reading.   Are the batteries good quality ones, Duracell, Energiser or Apple rechargeables.

  • Windows 8.1 freeze on any hardware scan or changes. USB wireless keyboard mouse not working

    Problem : System Freezes frequently on any hardware scan or changes.
    Symptom : Wireless Keyboard Mouse not working.
    Caused by : VMkbd.sys located in C:\Windows\System32\drivers.
    Issue : VMware player or VMware Workstation installed on Windows 8.1 causes compatibility issue leading to system freeze
    Soultion : Please follow steps below
    Step 1: Start > run > regedit
    Step 2: Locate to this registry HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e96b-e325-11ce-BFC1-08002BE10318}
    Step 3: On the left side plane, Right click on the registry {4d36e96b-e325-11ce-BFC1-08002BE10318} and then export it as backup. Just to be safe.
    Step 4: Edit the UpperFilters, The value current would be kdbclass vmkbd. Remove the vmkbd. So only value left would be kbdclass.
    Step 5: Restart your system and connect your USB wireless reciever. If all is well it will not freeze your windows now.
    This worked for me. Hope this works for you. Enjoy..!!

    Hi AshishSrivastava,
    Thank you for your sharing and update.
    Besides, I will change this thread type as discussion.
    Best regards
    Michael Shao
    TechNet Community Support

  • The volume keys on my Logitech K760 wireless keyboard do not work with my 2.3 GHz, Intel Core i5 Mac mini which runs Mac OS X 10.7.4. Anyone know how to correct this without having to re-code firmware?

    My first post to the Apple Support Community so it looks like all I wanted to know is covered in the title. The research I have done led me to solutions that I am not comfortable trying for fear of irreparably damaging my keyboard and/or Mac mini. Does anyone have a simpler solution? Please? Hellooooo?
    Just in case the title is too long to show, I have re-pasted here:
    The volume keys on my Logitech K760 wireless keyboard do not work with my 2.3 GHz, Intel Core i5 Mac mini which runs Mac OS X 10.7.4. Anyone know how to correct this without having to re-code firmware?

    BDAqua wrote:
    Hello & welcome to the Forums!
    I think Spark cured this for another person and the same problem...
    http://www.shadowlab.org/Software/spark.php
    http://scripts.sil.org/cms/scripts/page.php?site_id=nrsi&id=ukelele
    http://doublecommand.sourceforge.net/
    Thank you for the response. Unfortunately, I could not figure out how to work the above applications. I thought that i had managed to assign the appropriate function keys in Spark to their volume counterparts, but it had no effect. Below is a screen shot. Do you see anything amiss?

  • Wrt610n wireless network does not work after firmeware upgrade

    Hi
    I just updated my Wrt610n hardware version 1 to the newest firmware, it did finish with sucess, I did factory reset reboot and reconfig. But the wireless network does not work , cant connect computers to it. Did downgrade the firmware to the same it was and restore my settings but still wireless does not work. But router works fine with lan.  Any suggestions? maybe the firmware tosted the router?
    Regards
    Stefan

    Update -
    After last reset and reupgrade with the newest firmware for hardware version 1 I could config the router and connect 2 computers with wireless - but only for about 15 mín - then they lost connection and could not reconnect.
    I did then get the newest update for hardeware version 2 - just to try and upgraded with that and got success, and now I have reset the router again and config it and those 2 computers are connected and have been for 1 hour now. So seems to be working - is it okay to have the firmware for hardware version 2 on my version 1 router?
    Any thought what is going on - could it be that the other firmware had not loaded compleytle or?

  • Wireless net does not work after installing SP1 for Vista - Error code 10

    After installing Vista SP1 on my computer (T61 - Vista Business 32 bit) my intel 82566mm wireless net does not work.
    Windows says "Error code 10" and suggests that I update the driver. I have downloaded the newest driver via another computer, but it does not help. Still error code 10.
    Any one else has the same problem?

    I fixed the problem. Uninstall iTunes and then reinstall it clean. Looks like upgrading is problematic.

  • The letter "u" on my iMac's wireless keyboard is not working.

    The letter "u" on my iMac's wireless keyboard is not working. Does anyone know how to fix this? All the other key are working fine.

    I started a having problems with it a few days ago. It worked intermittently then.

  • Wireless key will not work

    I just moved my mac mini to my new apartment and my wireless keyboard will not work. My man mini model is A1103. The problem is that I need to type in a password to get on my mac to get to the bluetooth config screen. So I'm stuck at the login screen with a keyboard that just blinks. Its also my TV so im goin nuts. PLZ help.

    If you know someone with an USB keyboard, borrow it and use it to input the password. It doesn't need to have been made by Apple or designed to be used with a Mac.
    (50804)

  • The wireless keyboard is not working with my iPad2. I turned on Bluetooth and paired it.  What else is there to do?

    The wireless keyboard is not working with my iPad2.  I turned on bluetooth and paired the device.  What other hidden step is there to do?

    Well, the tiny green light comes on and blinks. . . After a frustrating time, I turned everything off.  Later, when I tried the keyboard again, it worked.  I guess the bluetooth process takes longer than expected.  So thank you for taking the time to help a technically impaired person!!

  • I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I cannot connect to the internet wirelessly. the wireless light has a fast green blinking light. how can I fix the router?

    I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I am unable to connect to the internet wirelessly.  The wireless light is blinking green very quickly and I connect and disconnect from the network constantly.  How do I get the router to work properly

    Hello James,
    The flashing WLAN light means activity (data getting transferred). Try disconnecting all your devices and check whether the light is still flashing or disconnect the router from internet and do the check.
    Do you have your SSID as linksys or the default one? If your neighbor has the same SSID, then traffic could result from your neighbor's one. Try changing your SSID and password. Make your security WPA/WPA2.
    Hope this helps,
    Thanks
    Vijay

  • TS3048 My left and right arrow on my wireless keyboard is not working.  It does not highlight in the keyboard viewer.  What's next?

    My left and right arrow on my wireless keyboard are not working.  I've looked at the keyboard viewer and see that they do not highlight.  What do I do now?

    Hello:
    Try resetting the PRAM.
    Barry

  • Wireless OS Update - not working

    I've been trying to update my BlackBerry Torch 9800 6.0.0.246 to higher version wirelessly but all it says - “Your BlackBerry is up to date.” The others we're able to update their smartphone but why can't I? I don't want to plug my phone to any computer using the cable connector because I'm afraid it would get virus and be ruined eventually. Please help..

    Duplicate:
    http://supportforums.blackberry.com/t5/BlackBerry-Torch/wireless-OS-update-not-working/m-p/2039115#n...
    Answer provided there. Please avoid poly-posting the exact same issue.
    Thanks!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Wireless mouse will not work at the top of the page on ANY website while running Firefox 7.0.1

    I am currently running Firefox 7.0.1 and have not had many problems until today. I have noticed that my wireless mouse will not work at the top of any website. This means I cannot log into many sites. I have also noticed that during page downloads, I have to move the mouse in order for the page to load or it just pauses. Any help would be appreciated!

    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    *Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    Se also:
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • I have wireless mouse does not work with boot camp

    i have wireless mouse does not work with boot camp

    Did you install the correct driver for your Windows version? Are you saying the mouse does not work in Windows after Windows is installed?

Maybe you are looking for

  • Problem with Mac OS X aliases in Dreamweaver

    I have a folder full of MP3s in the Music folder in my User directory. I'm planning to use these MP3s on several different websites I own, and rather than copying each MP3 to several different Site folders, this seems like a perfect use for an alias.

  • Browser keeps telling me to upgrade Flash Player

    Ok, Here is the problem I am having either with Google Chrome or Internet Explorer running in Safe Mode or Normal Mode. 1. I have Flash Player 13.0 installed. 2. whenever I go to a site, lets say Microsoft for example, and click on a download link I

  • Is it possible to turn off highlighting and underlining in iBooks on the iPad

    I like to read lying down, either in bed or on a sofa.  When lying down it is much more comfortable to hold the iPad with one hand.  I find it quite easy to do so if my thumb is placed inwards over the screen and if the iPad is partially propped up b

  • My MBP dosen't recognise my password?

    Hi, I could do with a little help. The story begins with a Cat, my GF and a glass of Wine. Cat hits wine and wine hits MBP. The Mac shut off instantly, we acted pretty quick and mopped up and turned upside down. I then took back off and over the cour

  • Schedule BPEL with polling frequency

    Hi All - I have a BPEL process which receives the file from file adapter and has polling frequency of 5 minutes. But my process starts after 12.00 midnight. so I want to schedule the BPEL process after 11.30PM to 1.00AM and in between only it should