Hp wireless headset h7000 multi device connect

Before purchasing the H7000 i noticed that it says that it supports 2 connecting to two devices.
Now that I bought it and after going through the setup guide which is not very helpful I would like to know how to connect to two devices?
I tried pairing both consecutively but it seems like it only connects to the last paired device.
Please let me know if there is a way to connect to two devices at once.

Hi,
I'm having the same issue with you.

Similar Messages

Comcast just replaced my cable modem/wireless router. All devices connect properly except my iPhone 4. It shows itself to be connected to the network, but it does not load any web page. Resetting the iPhone does not solve the problem. Any suggestions?

Comcast just replaced my cable modem/wireless router. All devices connect properly except my iPhone 4. It shows itself to be connected to the network, but it does not load any web page. Resetting the iPhone does not solve the problem. Any suggestions?

Thank you for your response.
I had rebooted the router (several times, actually), to no avail.
I do not know the answer to whether MAC filtering is enabled on the router. Have tried to find info about that, but unsuccessfully. Router is an Arris TG852G, supplied by Comcast. I would be surprised if MAC filtering were the issue, since in addition to the computer, we have successfully connected several other devices to the wifi, namely an iPad, a Android phone and a Kindle Fire - all able to access internet pages through the wifi, and all without a need to add the device to a MAC address whitelist. To add to the mystery, the Comcast tech was able to connect his iPhone 4 to my network and access web pages. He was unable to connect my iPhone, however, after trying for some time.
I seem to recall reading somewhere that an iPhone cannot connect to a wireless "n" router, only "b" or "g". The Arris router is described as a n/g/b compliant router, and as noted the Comcast tech was able to connect his iPhone, so don't know why that would be the issue here.
By the way, my iPhone does connect wirelessly to my network at home. This difficulty is at a second home.
Any other thoughts would be appreciated.

HP wireless headset H7000 setup

Cannot get sound from the headset. instructions are not clear.
It shows to physically connect to the computer.
then step 1 states to turn on press and hold the button for 3 seconds
then step 2 turn off: press and hold the button for 3 seconds
then step 3 Pairing: press and hold the button for 8 seconds.
following those steps in that order I still do not get sound, nor does my computer even show the device.
what does occur is doing step 1 I get a beep and then holding the button for 3 seconds I get a beep and a tone, this makes me believe that step turned the headset on. But alas, no sound.
I do not understand "pairing". It sounds like a process to make the wireless connection. But the headset does not show in the devices.
My system is an HP Lenovo with windows 8.1 installed
thanks for any input
This question was solved.
View Solution.

Hello urtheone,
I understand you are having trouble connecting your HP Bluetooth H7000 Headset to your computer. You also want to know what the term "Pairing" means.
When connecting Bluetooth devices for the first time, a registration is required. This process is called Pairing. Most Bluetooth devices must be paired before they can communicate with each other. When devices are paired, they share a pass key which authenticates the two devices to make sure that wireless communication and security is established.
After two devices are paired, the devices will automatically recognize each other and you can then connect and disconnect the devices easily. You don’t have to pair them again unless the pairing is deleted on one or both devices.
Now, what I need to know is what computer do you have? I need the brand and model number. It is either an HP computer or a Lenovo, it cannot be both.
You probably need to turn on the Bluetooth hardware first on the computer before you can pair the two devices. Usually on a laptop it’s the Fn key and F3 or Fn and F5. Or you can go into Windows 8 and turn on and off your wireless settings.
http://www.youtube.com/watch?v=fhuXwelEo-A
Then you may need to go into Windows settings and go to “Add a device” to add the headset. This is where you will hold down the button on the headset to pair the device and connect.
Here is a video of a guy showing how to add a Bluetooth device on Windows 8. https://www.youtube.com/watch?v=QQZsd4Yk1nE
If you do have a Lenovo computer and are having trouble connecting still, you will need to contact Lenovo for further info.
Hope this helps.

Drivers for HP H7000 bluetooth wireless headset

Добрый день.
Сегодня приобрел гарнитуру HP H7000, подключил её, но для работы не могу найти драйверы. У меня windows 7 64. Скажите пожалуйста, где мне взять драйверы для работы ?
Hello !
Today I acquired HP H7000 bluetooth wireless headset, I connected it, but for operation I can't find drivers. I have windows 7 64. Tell please where to take me drivers for operation?

The model number HP Officejet 4500.
Method 1:
You may refer to the below links and use the troubleshooters. Check if it lists and helps resolve any issues: Open the Printer troubleshooter:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=3986395&submit=&
Method 2:
You may check if you have the latest drivers installed for the device. You may refer to the below link for getting the latest drivers and check –
HP Officejet 4500 Driver
Good Luck...

My iPhone 5 will no longer connect via bluetooth to Fitbit Flex or wireless headset

My iPhone 5 will no longer connect via bluetooth to my Fitbit Flex aftering updating to ios 7. Apple phone support had me completely erase and set my phone up again as new to restart bluetooth pairing, then restore again through iCloud. Worked last night but same problem today. It also will no longer connect to my wireless headset in my car. Of course I'm now 5 days over my 1 year warranty as well. Any ideas?

Delete the pairing from both devices then pair them again.

Sony DR-BT21G Wireless Headset & windows 7. Device driver software?

Hi Guys, trying to connect my Sony DR-BT21G Wireless Headset , to my P.C via Bluetooth,
Operating system for my machine wasW8, but has been downgraded to W7.
I have installed a Bluetooth dongle.
The computer recognises the headset as a device, but states that "the Driver for the Bluetooth peripheral device is not installed"
Cannot find a download to fix this problem.. any ideas?

Please try the following. Each of these steps represents a possible solution to this issue, check the pair status after completing each step:
Make sure both devices are turned off at the beginning of the pairing procedure.
Be sure to place the Bluetooth wireless devices within 1 meter (3 ft) of each other.
Make sure that the Bluetooth wireless device is in the Pairing mode.
Enter the same Passcode for both Pairing devices.
Make sure that the profiles of the Bluetooth wireless devices match. Devices that do not support the same profile cannot be paired.
If the Bluetooth wireless device has a TX/RX (transmit/receive) switch, make sure it is set to the appropriate function.
Some Bluetooth wireless devices can function as a transmitter or receiver only. Two devices that serve the same function (transmit or receive) cannot be paired. You must pair a transmitter with a receiver.
The device you are trying to pair with must support Advanced Audio Distribution Profile (A2DP) and AVRCP (Audio Video Remote Control Profile).
If pairing is not established within five minutes, pairing mode will be cancelled and the Bluetooth headphones will automatically turn off. If this happens, perform the pairing procedure again.
If my post answers your question, please mark it as "Accept as Solution"

I cannot get my iPad2 to communicate with a Motorola H700 wireless headset. The iPad shows that they are connected, but nothing works.

I cannot get my iPad2 to communicate with a Motorola H700 wireless headset. The iPad shows that they are connected, but nothing works. I am trying to get the little microphone to show up for voice messaging.

I have since fiund out that the talk to text feature is only available on devices that support Siri, iPad3, iPhone4 and later. Hope this helps someone else.

HT2250 I have been able to get my MacBook Pro to print wirelessly through my Airport device. How do I make it so other computers (non-Mac) can also print wirelessly as well? They are able to connect through my wireless network but can't print.

I have been able to get my MacBook Pro to print wirelessly through my Airport device. How do I make it so other computers (non-Mac) can also print wirelessly as well? They are able to connect through my wireless network but can't print.

Well, you could install the drivers to the wireless printer in you other computers.
blue apple > System Preferences... > sharing
check printer sharing.

Can I use more than one blue-tooth device at the same time on IPhone 4S? Like a wireless headsets and speed and cadence sensor for cycling computer, receive the data and listen music simultaneously

Can I use more than one blue-tooth device at the same time on IPhone 4S? Like a wireless headsets and speed and cadence sensor for cycling computer, receive the data and listen music simultaneously

As long as the profiles are different (ex. HID vs AD2P) you will not have any issues. But say if you try to use 2 keyboards at once, it won't work. Or 2 headsets at once. Your scenario seems fine.

I just set up the airport wireless modem - with a comcast internet router - all wireless device connect seemlessly (3 Iphones, Mac Air, and a Sony Laptop) but my IPAD 1 no longer connects. It tries to but never connects. I have reset it and have utility

I just set up the airport wireless modem - with a comcast internet router - all wireless device connect seemlessly (3 Iphones, Mac Air, and a Sony Laptop) but my IPAD 1 no longer connects. It tries to but never connects. I have reset it and have airprot utility app downloaded on my IPAD - it shows the modem and the internet no connected?

Do you mean an Airport Extreme Base Station connected to a Comcast Modem?

Smart Wireless Headset Pro connection to laptop

Good afternoon all,
I'm trying to connect my wireless headset to my business laptop...
But when connecting, windows (vista) wants to have drivers for the headset.
Now my question is: Where to get these drivers? Or is this even possible what I want?
Thanks!

There are no special drivers for Smart Wireless Headset pro, it uses standard Bluetooth drivers. Check that your Bluetooth stack is using the latest firmware version.
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

I recently bought a new Imac. Do I have to set up a wireless router or can my other devices connect thru the WIFI built into the Imac??

I recently bought a new Imac. Do I have to set up a wireless router or can my other devices connect thru the Wifi built into the Imac??

jason1074 wrote:
I recently bought a new Imac. Do I have to set up a wireless router or can my other devices connect thru the Wifi built into the Imac??
For the Internet, you should set up a router on your modem, this router will route the packets to any device on the local area network.
If you use the iMac as a router, like if you connect the Ethernet cable from your modem to the iMac, then broadcast a Wifi signal, the iMac will have to remain on all the time, at full power. Thus drastically shortening it's lifespand.
A router is only about $100 or so, offers much better security as it's like a large guard, someone has to hack through router first to get your iMac or other devices.
If it breaks, you buy another 5 years later for another $100, so your not placing all that always on wear and tear on your expensive iMac.
Apple's airport routers are pretty good, easy to set up and have automatic firmware updates, plus music sharing etc.
Set up properly you will be very secure
WiFi security issues, at home and WiFi hotspots

Wireless headset nt connecting:7610

i hav a nokia 7610. i got a nokia wireless headset n95 4 it but d 2 aren't connecting although d headset is compatible wid d model....can any1 help me out...
Message Edited by kuhu98pihu on 16-May-2008 04:50 PM

Hello Audiohelp,
Yes you can purchase a coupler to plug directly into a set top box red and white audio jacks to a head phone female jack you require. You can search on the internet for - Audio Adapter - 3.5mm Jack to 2x RCA Plugs and will find several websites you can order one or visit a local brick and mortar store.
It will look like this:
I hope you continue to enjoy your FiOS TV. Let me know if I can help any further.
Thank you
Mike_VZ
Verizon Support
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms of Service, or your Customer Agreement Terms and Conditions or Plan.

WRT54GS v5.1 auto reboot when wireless device connects

Hi,
I'm using the linksys WRT54GS wireless router v5.1
Current Firmware version v1.50.9, Sep. 14, 2006
The problem that I have is that everytime a new device connects to the Router wirelessly, the router reboots itself.
After the reboot, everything seems to be working fine. This becomes quite annoying when it comes to gaming and another family member turns on their laptop and then I get disconnected by the router because they are connecting.
What I have done upto now is reset the router after doing the FirmWare Version update and the problem still occurs. (The problem was still there even before I had done a FirmWare Update.)
Is there a way to solve this problem? because I have read about a few other problems just like mine on the forums and they don't seem to have been resolved.
Or will I have to go back to PCWORLD to see if I can get a refund / replacement?
Message Edited by chopsticks on 11-11-200611:05 AM
Message Edited by chopsticks on 11-11-200611:05 AM
Message Edited by chopsticks on 11-11-200611:08 AM

I do not see a "keep alive" option. I use the Automatic Configuration - DHCP because I have connected, a CABLE MODEM provided by my cable provider Telewest Blueyonder
The router just reboots when the wireless laptops connect. The wired desktop (this PC) loses connection as it is rebooting and regains connection after the reboot. Then both PC and Laptop work fine.
Message Edited by chopsticks on 11-12-200612:03 PM

Issues with FIOS modem/router's wireless and multiple devices connected to the WLAN?

I am an IT consultant who was assisting someone with getting some devices connected to the fios wireless router and adding a wireless print server so they could print wirelesly.
I was having difficulty with one of their systems that was connected prior to me going on site.
It was having difficulty obtaining an IP from the WLAN, i tried reinstalling the adapter, removing stored wlan settings and setting it up again, etc.
When it did obtain an IP it could not ping the router.
I had left it suggesting that they replace the wireless adapter on that system.
However they're saying that after they shut down one of their other devices that i had connected (a netbook), that this problematic system started working fine.
It makes no sense that a wireless client would have an impact on another wireless client. We're only talking 4 total devices here, a netbook, a laptop, a wireless print server and a desktop in another area of the house that has a usb wireless adapter.
Does anyone have any ideas on if Verizon's wireless built in to the fios modem/router just isn't too good to handle multiple wireless devices?
After hearing this i was thinking they might have been better off configuring the fios router as a bridge and getting a better wireless router or shutting off the fios supplied wifi and implementing a wireless access point instead of using the router/modem that verizon provides.

By bridge I mean in the sense you see some of the early DSL setups configured before they started using multiport routers -- essentially bridging the WAN MoCA port to the LAN ethernet. The ActionTEC's won't do that. This is what I think most are seeking to do when they want to turn the device into a "bridge" (essentially making the Verizon unit "transparent" to the communication which in this scenario it can't be). You can do as suggested an turn the ActionTEC into essentially a "switch/bridge" that is only bridging the MoCA LAN and Ethernet LAN segments, but this then requires you to have an ethernet WAN feed from the ONT ... and as indicated, it is definitely not a "supported" configuration from Verizon (although there is nothing "wrong" with doing it this way if you are comfortable with networking and understanding the mechanics of all that is going on -- if not, sticking with a supported configuration is highly advisable).

Hp wireless headset h7000 multi device connect

Similar Messages

Maybe you are looking for