Hp wireless laser mini mouse. no icon

I have a windows 7/ 64 system. I used to have a mouse icon in my task bar , now i don't. Tried down loading drivers no success. the mouse works fine, but i like the mouse in the task bar You can wave the curser over the icon, this will tell how the battery is. thanks

Hi,
To be honest, I don't know why you need mouse icon on Taskbar. You can have it back if you wish:
Control panel > Mouse
Right click then Send to Desktop
Drag it to Taskbar
You may want to check the Taskbar first, it may be locked out side. Just unlock Taskbasr and see.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Hp wireless laser mini mouse will not scroll pages with the wheel

Hello, I switched to firefox as my main browser, much better than IE9 in vista 32 bit. I am using a Hp Pavilion entertainment PC laptop with a HP wireless mini mouse and the scroll wheel will not move the web pages up or down, works okay in IE9. I can use the keyboard to scroll and cursor click arrows okay, I really like the mouse wheel better. Thanks for your help.

hello Thegman50, have you already tried installing the latest drvier version that is available for this mouse model from: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=no-75205-1&cc=us&dlc=en&lc=en&os=2093&product=3209078&sw_lang= ?

Wireless Laser Comfort Mouse

Just installed software and driver for
Wireless Laser Comfort Mouse - Product Number XA965AA#Abb
When I go to the HP Mouse Control Center it says "No device found"
All the basic functions of the mouse work, left / right clicks and scroll but i can not configure any of the other buttons.
I've look up the support for this mouse on the hp site and it's was less than helpful, only gave me the chance to download a quick start up leaflet, very useful!
Any help anyone?????????

Hello Guys:
Did any one you go to the control pannel and click on mouse icon and opened it? Mouse Properties click on hardware your mouse that you just installed or connected shoud be listed. Right now you are using HID-compliant mouse. Witch is HP's mouse figuration. See if that works for you. I am not sure but the HP Keyboard may be restricting new mouse setting as well. I do know from my own experience when the keyboard faild do to corrupt software already in keyboard the mouse went as well. That is why HP sends both mouse , keyboard and blue tooth as a repaired set. I also knew some body here on this forum replace his new store brand mouse and Keyboard as a set. Your mouse should have came with it's own blue tooth device. Try using it along with the one installed for HP's Keyboard see if your mouse works then. frrw

Microsoft Wireless Laser Mouse 8000 and Leopard/Mac

I wasn't able to get my Microsoft Wireless Laser Mouse 8000 working under 10.4 but am trying again with Leopard - so far fruitlessly. With the latest version of Intellipoint for Mac (6.2.2) installed, my bluetooth seteup assistant will find the mouse when it's in pairing mode - but when it attempts to pair using an empty passkey it always fails.
Help please!

I just got this mouse and DID successfully PAIR it with my Macbook.
I did these steps.
1. Install Intellipoint 6.2.2
2. Connect it using the supplied dongle. It should work fine.
3. After you have tested it with that, remove the dongle and go to set up bluetooth device from the Bluetooth menu option (enable this in system preferences).
4. On the setup choose Mouse (not Any Device like I saw in some other posts)
5. Click Continue and while it is searching, press and HOLD the pairing button on the mouse. The battery display should be solid green while you are doing this (not green and red). After a few seconds, the display should say "Microsoft Wireless Laser 8000" mouse is found.
6. Click Continue, and it will attempt to connect and pair. Again, press and HOLD the pairing button on the mouse while it is doing this. If successful, it should then show up as paired in the bluetooth pref pane (see image below).
http://coolmacguy.com/images/misc/mouse.png

TS3048 My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

I would always have a wired keyboard and mouse on hand (need not be expensive ... any cheap wired devices will work). "Emergency recovery" procedures can activate features in random order, so the opportunity to select a recovery partition may pass before the wireless devices are recognized.
That will let you select the "turn on Bluetooth" icon.

Pair mouse ... Microsoft Wireless laser Mouse 8000

I , i have a Macbook pro 2011 and i upgrade the osx to yosemite 10.10 ... after that i can not connect my Microsoft Wireless laser Mouse 8000 ... any help ??
Thanks

Have your tried this before
By Alvaro Becerra
Hi, I tried all the tricks listed here with no luck, but I think I've finally found the solution.
Try using "any device" option, then, when the assistant tries to pair with the device, there's a button called "passkey options", click it and then select the option "Don't use a passkey".
The mouse will pair successfully. Mine is working great on my iMac.
from post: http://discussions.apple.com/thread.jspa?threadID=1504954

I have just replaced my mac mini because previous motherboard was damaged. I want to pair with my existing wireless keyboard and mouse but can only pair with thebold mac mini which will not start. Any ideas?

See title. How do I unpair a wireless keyboard and mouse when the previous paired mac mini is damaged and will not start?

You should be able to go to System Preferences -> Keyboard and System Preferences -> Mouse and discover the bluetooth devices.
Also, do you have a bluetooth icon on the top bar of your mac? Should look sort of like this:
If you can figure out which device is which (by trial and error, if nothing else), you can connect to them on this menu.

Cannot pair microsoft Wireless Laser Mouse 8000

Have been trying to pair microsoft Wireless Laser Mouse 8000 in Leopard 10.5.6 in a Macbook, the latest Mac Mini & a G4 mini to no avail, all have failed to be paired in the very last step of the bluetooth step up, but were able to do so in boot camp windows, so it should not be the problem with the bluetooth, anyone can help? thanx.....

Have your tried this before
By Alvaro Becerra
Hi, I tried all the tricks listed here with no luck, but I think I've finally found the solution.
Try using "any device" option, then, when the assistant tries to pair with the device, there's a button called "passkey options", click it and then select the option "Don't use a passkey".
The mouse will pair successfully. Mine is working great on my iMac.
from post: http://discussions.apple.com/thread.jspa?threadID=1504954

My new mac mini doesn't detect my wireless keyboard and mouse from logitech

I recently bought the Logitech MK550 wireless keyboard and mouse combo for my late 2014 Mac mini. Basic functions work, however, when I try to add the keyboard and mouse in the System Preferences it can't find either one. So right now I have this great big keyboard that I can only use about half it's full functionality and an unassigned button on the mouse. Any ideas? Also, I would like to add an apple remote to my mini. I have one from my old iMac. Is this possible?

Try resetting the SMC.
Question #2 - I have no idea.
Barry

Syncing Microsoft Wireless Laser Mouse 8000

I was wondering if the Microsoft Wireless Laser Mouse 8000 could be synced to the Mac with Apple's bluetooth technology. Microsoft has provided a USB bluetooth device, but I was wondering if I could use the Bluetooth Setup Assistant to set up this particular device. Everytime I try, it says "Device not found." I have installed the Microsoft IntelliPoint software that came with the mouse.

You're really asking in the wrong place: iSync is a Mac OS X application used to synchronize contact, event and task information with selected mobile handsets, smartphones and Palm handheld organizers.
Instead, you should post a query in the Bluetooth forum, here.

Microsoft Wireless Laser Mouse 5000

I unwrapped a new MS Wireless Laser Mouse 5000. It appears to have a plastic wrap on the top. Like the cling wrap on some electronic items. It doesn't seem to want to come off. The sides are the same texture as other MS mice. Anyone else seen this plastic cover and tried to remove it? I don't want to damage the surface.
Thanks,
- Craig

Found out that it has a slick finish.

Nano Wireless Laser Mouse w/ USB Receiver- not recognizing

I bought a WIreless Laser Mouse with a USB receiver, and the USB receiver is recognized, yet the mouse still doesn't work. I've replaced the batteries with new ones in case that was the issue; it wasn't. It was working about a week ago, after which I moved to the UK, but as it's battery-powered that shouldn't really be an issue. Is there some stupid thing I'm missing, an on/off switch or something? Anything else I should try?
Thanks in advance.

Could be a number of reasons that your USB mouse is no longer working. Check the batteries again. This time use a voltmeter. Just because the batteries are new in the package doesn't mean that they're not old or damaaged. Check the mouse for a switch. With the move, the switch, typically on the bottom of the mouse, could have been switched. Check the mouse dongle in the USB port. Maybe it's not seated fully in the port. Or try a different USB port.

HT5539 how do i pair my wireless keyboard and mouse to a new mac mini

how do i pair my wireless keyboard and mouse to a new mac mini

First you have to unpair them from their previous devices.
Troubleshooting wireless mouse and keyboard issues

Hi, I bouhgt a used Apple Power Mac G5, I want to buy a blue tooth card for the same to use wireless keyboard and mouse, i am just curious that why do i need to provide the serial number of my computer, is there any compatibilty issue?

Hi, I am new in Apple Computer, I bought a used Power Mac G5. I want to buy a blue tooth card for the same to use wireless keyboard and mouse. so why it is mandatory to provide the serial number of the machine?

Hello, Serial# not needed...
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto *but not including the Serial#*...
Hardware Overview:
Machine Name: Power Mac G5 Quad
Machine Model: PowerMac11,2
CPU Type: PowerPC G5 (1.1)
Number Of CPUs: 4
CPU Speed: 2.5 GHz
L2 Cache (per CPU): 1 MB
Memory: 10 GB
Bus Speed: 1.25 GHz
Boot ROM Version: 5.2.7f1

Keyboard/Mouse battery icon????

My TouchSmart 600-1055 uses HP's wireless keyboard and mouse. The computer runs Windows7. There is no mouse or keyboard icon in the system tray, so there is no way to see the state of the battery charge on the mouse or keyboard. Windows7 is supposed to be able to monitor the battery charge of wireless keyboards and mice. I checked to see if an icon is available using the "customize" option for the system tray. There is no option listed.
Is this something unique to TouchSmart computers running under Windows7? Is there a fix for this issue? I'd sure like to know when my mouse or keyboard are about to run out of juice! Seems to me that this is an essential piece of information for a computer than runs with battery operated wireless keyboard and mouse!!
Is there an HP or Microsoft fix available???
Saul

maro444 wrote:
anyway I have HP TouchSmart iq508d, and i just upgraded it to Windows 7, but i have 2 issues:
1- is the same issue here, which is the mouse/keyboard battery level indicators are nor shown (i did your solution, but during the installation i got an error meesage saying 'the system doesn't meet the operation system reuirement.update is canceleed (9997)')...I hope you can help me regarding this
2- the second is, the side volume buttons are doing nothing, I was wondering how to fix it
The posted files for Win7 upgraded IQ5xx and IQ8xx machines in regards to the OSD/ACPI/Buttons don't work, this has been a problem since they were released. Some folks get better results by going back and installing the Vista drivers for the OSD/ACPI/Buttons. (this is for IQ5xx and IQ8xx upgraded machines NOT the 300/600 series that ship with Win7 from the factory)
Diane

Hp wireless laser mini mouse. no icon

Similar Messages

Maybe you are looking for