HP wireless TV connect no longer working after Win 8.1 "upgrade"

Help, my transmitter will not link to the box now that I have upgraded from Windows 8 to Windows8.1.
When first plugged in, the Trans light blinks 5 times fast, then no lights.  The receiver continually blinks slower and when the trans button is held, the lights both blink at the same speed, but will not link.
I removed and tried to "add new video source" but the "Please activate registration on transmitter unit" pops up and when attempting to push button, the two won't sync...
I looked for the HP trans in the devices but could not find it.  I check the HDMI card (disabled and enabled) to no avail...
Are there firmware patches for this device.  I need help ASAP as I need this functionality for work, but I had to have the upgrade for work as well...
I am getting a "tone" when the receiver fails from the laptop speakers

PROBLEM SOLVED ON ENVY 17 INTEL QUAD: Using Windows 8.1 with HP Wireless TV connect NOT linking issues.  I had the total 8.1 installed 4/12/2014 and even at this late a date, not all the wireless drivers were updated to their latest rev.  HP Support has a set of Intel driver updates and downloades; just select the ones you need, save and update.  With the update to all the associated applications, I believe there were 3 of them for my computer, I am now working well.  I am under warranty with my unit so I was fortunate to have, Likshima, a second level supervisor at HP who took the time to research this problem and find the solution, personally correct my issues!  Hope this helps because to my comprehension, an update is by far the safest solution!!!

Similar Messages

  • My Bluetooth device A2DP (life audio feed) no longer works after 5.1.1 upgrade

    My Bluetooth device A2DP (life audio feed) no longer works after 5.1.1 upgrade. But phone call is still working. Tried resetting phone and repairing device. Still not working. Any suggestion?

    You might get. Ore assistance in a different forum area. Maybe try Using pad. This is the forum for iPhoto for iOS.

  • Apple Wireless Bluetooth Keyboard no longer works after OSX update

    After installing the latest OSX update yesterday (something about iChat encryption), Apple Bluetooth Keyboard no longer works with my iMac.
    When I restarted the iMac after installation was completed, the iMac would no longer recognise my Bluetooth Apple wireless keyboard. I've tried with 2 other Apple wireless keyboards as well, but to no avail. None of them work with the iMac any longer. All 3 keyboards work with my PowerMac Quad G5 though.
    The iMac "sees" the keyboards, but the pairing doesn't go through because the iMac doesn't seem to recognise the keystrokes when entering the pairing code.
    I had to go out and buy myself a Microsoft wired keyboard to be able to restart the iMac (couldn't enter the login password without a keyboard).
    My bluetooth mighty mouse works flawlessly though.
    Very frustrating. Can anyone help?
    ...tt
    iMac 24" 2.33GHz 3GB   Mac OS X (10.4.8)  

    And yes I checked the batteries.

  • HDMI connection no longer works after Windows 8 download

    Hello, 
    I have a HP Touchsmart tm2t Notebook and was using an HDMI cord to connect to a television since I bought the computer in 2010. A few months back, I downloaded Windows 8 and ever since then, the HDMI connection to the TV no longer works. I've tried the troubleshooting steps that I could find and nothing seems to work. Any ideas?
    Thanks in advance!

    Hello KatieMcK
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that you are not able to connect your notebook to your TV using Windows 8, and I would be happy to assist you in this matter!
    For further assistance, I will need to know:
    The Product and Model Number of your notebook computer.
    The version of Windows you had installed on your computer before upgrading.
    If your computer has completed all of its important Windows Updates.
    If you have updated your HP drivers using the HP Support Assistant.
    If this is an on-going, or recent issue.
    If you are able to use your TV to another HDMI connected device.
    Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
    Regards  
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Installed Apps No Longer Work After 3.1.3 Upgrade

    Last night I upgraded to 3.1.3, and since then NONE of the Apps that I installed works... Each time I try to open any of them, it will open and stop just as quickly, taking me back to the Home screen...
    I thought at first it was only the Apps that required Internet Access (IM and/or Email Apps)... However, I was able to open a web page using Safari, and the Email App included in iPhone STILL works... And, like it would normally do, it would check first for a local wireless network, and switch to 3G if it does not find one... However, in this case, when trying any of the Apps I've installed, it does not even check at all for a network or 3G, the Apps just shut down just as quickly as I launch them...
    Since then I've discovered that ALL the Apps I've downloaded and installed prior to the upgrade no longer work...
    I have cycled the power on the iPhone (Turning it OFF by means of the SLEEP button, and then back on minutes after than), but that doesn't solve the problem...
    Any information would be appreciated...
    Thanks for your time...

    TainoV2 wrote:
    I have cycled the power on the iPhone (Turning it OFF by means of the SLEEP button, and then back on minutes after than), but that doesn't solve the problem...
    Did you try a reboot (by means of BOTH the Sleep and Home buttons and holding both IGNORING the slide to turn off, and keep holding until you finally see the Apple Logo?)
    Message was edited by: DaVBMan

  • Android remote iTunes app no longer works after 10.5.2 upgrade.

    Until the 10.5.2 iTunes update, I was able to use the Android app, Remote for iTunes, to enable my Android tabs to control iTunes on my Windows 7 machine.  After this upgrade, my tablets no longer show up as "devices" in iTunes.  Am I the only one to experience this?

    Thanks for your replies.
    I don't think I described my problem adequately. Before updating to 10.5.2 the clamshell mode worked correctly: I closed the lid, waited 30 seconds, then touched the keyboard and - presto! - the cinema display came alive with the desktop shown. I understand how the clamshell mode is supposed to work because it used to work just fine.
    My problem now is that it no longer works the way it is supposed to. If I wait 30 seconds after closing the lid of the MBP and then touch / attach an external keyboard, nothing happens. I am following the proper steps to use clamshell mode (at least the steps that previously worked), but they do not appear to be effective any longer.
    I appreciate the advice I have received about how the clamshell mode is supposed to work. Unfortunately, following those standard steps is not leading to successful operation in clamshell mode.
    Thanks,
    Danny

  • AirPrint no longer works after 10.6.5 upgrade

    I followed the instructions in the following discussion thread (i.e. ran the mentioned script) and Print was working perfectly from my iPhones and iPad. Then other day I updated the OS to 10.6.5 and printing no longer works. I assumed that the changes were overwritten by the OS update so I just ran the Script again, same as before, however Printing still does Not work. Please advise. Could it be that Apple realized this work around and plugged it just to **** their "valued" customers.
    http://discussions.apple.com/thread.jspa?threadID=2658720&tstart=0
    Thanks in advance.

    Then other day I updated the OS to 10.6.5
    The other day?
    Your post in the other thread on 29 November shows you had 10.6.5 installed.
    Also I can't explain why but it most certainly did work with the previous OS X
    AirPrint is not dependent on the OS
    It is dependent on the printer firmware. The printer needs to be on the local network and does not need to be connected directly to a computer.
    The fix in that other thread allows iPads to print to printers connected to a Mac.
    The code that allows this was not present in Mac OS prior to 10.6.5
    If it worked previously, it sounds like you have an AirPrint compatible printer.

  • S230U Twist - Camera no longer works after Win 8.1

    Hello all! 
    I've scoured the forums and tried EVERYTHING but I still cannot find a solution to my problem:
    After I upgrade from Win 8 to Win8.1, my camera no longer works. It shows a gray screen with a camera and a diagonal line across it but the green camera light shows up; I also get a shutter sound when take a picture but the image is only of  the aforementioned gray camera screen. I can't use the camera for video in skype or any other video chat function. 
    My Integrated Camera driver version is 3.4.7.26 (SunplusIT) dated 3/15/2013. I tried to upgrade but it seems to be the latest one. 
    I've also checked that the Lock Screen setting is set to ON for "Swipe down on lock screen to use camera". 
    SOMEONE, please HELP!

    Hi,
    Welcome to Lenovo Community Forums!
    I'm really sorry to hear that when you try to use webcam in your Lenovo S230U Twist, you are getting a crossed camera image.
    Check if your camera is in normal or private mode. This could be happening because you might have set your camera in private mode.
    Go into Lenovo Settings App and select camera.
    There will be the options of Private and Normal.
    Select Normal.
    Also, in Settings > Permissions, make sure that Skype and other similar apps have permission to access the Webcam or Microphone.
    Hope this helps!
    Best regards,
    Mithun.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • W520 webcam no longer working after Windows 8.1 upgrade

    Hello,
    I upgraded my w520 from Win 7 to Win 8 last year with zero problems.
    Now I upgraded my W520 Win 8 to Win 8.1 via the store download. Except the webcam everything works fine.
    In e.g. the Skype desktop application, Google Hangouts or the camera app, the built in webcam no longer works.
    The green light turns on, but I just get the crossed out camra icon in e.g. the Skype video options. No video.
    I see there are no drivers yet for Win 8.1 on the Lenovo support site for the w520 camera.
    In device manager it still shows the 2011 camera driver 1.1.0.1147 and says "This device is working properly." 
    But it does not work properly.
    Did anyone get the camera to work or is it just a matter of waiting for a driver to be released eventually?
    I tried uninstalling, reinstalling, camera is enabled in the Bios and permissions are set to give Skype and the camera app access to the camera. I also tried the W530 drives as was suggested elsewhere.
    Thank you!
    Solved!
    Go to Solution.

    try getting the communicastion utility installed under 8.1. The crossed image is the cameras security mode.
    W530(2436-CTO): i7-3720QM, nVidia Quadro K2000M,16GB RAM, 500 GB hard drive, 128GB mSATA SSD, Ubuntu 14.04 Gnome, Centrino Ultimate-N 6300.
    Yoga 3 Pro: Intel Core-M 5Y70, Intel HD 5300, 8GB RAM, 128GB eMMC, Windows 8.1, Broadcom Wireless 802.11ac.

  • Mail search no longer works after 10.7.2 upgrade

    The search field in the upper right hand corner no longer returns any results, from any mailbox, regardless of the text I type in.  This was working fine until I upgraded to 10.7.2.  I absolutely rely on the search feature as my mail messages are a wealth of information for me.
    Help!
    Brian

    I've managed to get it working after trying the following:
    1. Used Disk Utility to repair permissions on my main drive
    2. In Terminal used the comand "sudo mdutil -v -i on /"
    That tells spotlight to turn indexing on for that drive.
    3. Did a restart
    I'd recommend trying the permissions and a restart first and if that doesn't help then try the command line fix.
    The first time I ran it without -v so got no feedback on what it was doing. Stopping it and trying to do it again gave me the message "Error: Index is already changing state.  Please try again in a moment." After the restart it now says:
    Indexing enabled.
              Scan base time: 2011-10-19 07:40:10 +0100 (60 seconds ago), reasoning: 'scan not required - avoided catchup scan'
    Now mail is back to how it was before the 10.7.2 update, happy days.

  • Wireless shows connected but stops working after a few hours?

    Hi. I am having an issue with my linksys WRT160N v2 router. I have my desktop computer hardwired to my range extender (belkin E2S2400) which connects wirelessly to my router. The issue I am having is that after a few hours, especially if I am not on the computer, the wireless will stop working. Everything still shows connected and there is no evidence of a change except that anything I try to do (webpage, download, even the router itself) times out and says not available. It's as if the connection has somehow been put to sleep and is not being woken up.
    This is despite having programs like bittorrent running in the background (seeding, not constant). I cannot find any settings to indicate sleeping or power issues or anything. If I reboot my range extender it works just fine. There is nothing on the range extender about going to sleep and it had no problem with my other router I was trying out. My other devices like my phone have no problem like this. 
    Any help is greatly appreciated!

    It would be best to check if the WRT160N v.2 router has the latest firmware installed especially if you experienced the problem on all of your wireless devices. If ever you have the latest firmware installed on your router please try to check on your current wireless security settings especially the wireless channel, you may set it to 1,6, 9 or 11.

  • Camera connection no longer works after 10.4.7 update

    Today in the middle of a shoot I made the mistake of letting Software Update download the 10.4.7 OS update. As soon as I rebooted my Canon camera was no longer able to connect to my Powerbook. In the System Profiler under USB it indicates that the camera is connected, but Canon's software just hangs or tells me to check the connection. If I switch the camera to PTP and launch iPhoto the camera doesn't appear either.
    Everything worked fine before the update. I shoot in tethered mode so using a card reader will not help me with that. Canon support says that 10.4.7 was released to solve a connection problem with 10.4.6, but for me it has had the opposite effect. I am the first person to report this problem, though there have been issues with users of Intel Macs which were solved by reinstalling software. I reinstalled and updated everything to no avail. Anybody have any ideas or similar experience.
    I certainly wish I'd never alowed this update. Is there any way to revert back to 10.4.6?

    I have a DSC-T1 Sony camera. I also have a Panasonic video camera with a built in digital camera. I just took some shots with the Panasonic. Plugged it in, and it worked perfectly. iphoto opened and did what it was supposed to do. I then tried the Sony and nothing happened again. Maybe this is a problem with the mac not recognizing certain cameras...?????
    Macbook Pro 15"   Mac OS X (10.4.6)  
    Macbook Pro 15"   Mac OS X (10.4.6)  

  • Imaps connections no longer working after ios5 upgrade

    Hi
    I upgraded my ipad to IOS5 today.  After this, connections to our imaps mail server is failing:
    Oct 12 18:39:14 umdgrb dovecot: imap-login: Disconnected (no auth attempts): rip=xxx.xx.xx.xx, lip=xxx.x.xx.x, TLS handshaking: SSL_accept() failed: error:1408F119:SSL routines:SSL3_GET_RECORD:decryption failed or bad record mac
    Server runs debian 5.0.8 (dovecot v 1:1.2.15-7)
    and ios 4.x device is still working fine. 
    Anyone have any ideas?

    This is resolved.  The dovecot SSL certs were a little old and generated with an
    older openssl lib.  We've regenerated and distributed new certificates and things are working
    again.  Seems support for some older SSL/x509 format has been dropped but the latest
    version of openssl tools on the box generates updated formats by default.

  • Laptop internet connection no longer works after adding Time Capsule to network

    The other day I was setting up my Time Capsule for the first time at my new apartment (after having it in a box for months). I've got internet access through my apartment, so I haven't needed to use it as a router like I did the last time I used it. Also, the router is in another tenant's room. So I opened Airport Utility and adjusted the settings to add the Time Capsule to the network. After doing this, my laptop has lost its Internet connection. I can still connect to the network and my iPad has had no issues connecting to the same network and using the Internet, but the Internet won't work on my MacBook Pro (2006 model).
    Since then, I've plugged an ethernet cable between my laptop and Time Capsule so I could find it on Airport Utility and change its settings to connect to the laptop via Ethernet. Also, I called my landlord and got the router reset.
    I know the Time Capsule/Airport Utility is involved because the Internet connection died as soon as I tried adding my Time Capsule to the network.
    Any suggestions?

    I am having the same problem.  It worked fine (connecting my iOS devices to my macbook pro using internet sharing) until Lion.  Then it all went to ****.

  • Internet sharing no longer works after 10.5.3 upgrade

    I'm aware that a number of people seem to be having wireless networking problems after upgrading to 10.5.3. I apologise if this has been covered somewhere else, but after trawling the forum I haven't been able to find any posts which deal with my specific issue. So any suggestions would be gratefully received...
    My 24" 2.8GHz Intel iMac (purchased in Feb 2008) is connected to the internet via ethernet cable through a Speedtouch router supplied by my ISP, o2.
    This internet connection is shared wirelessly with the other computer in the house, a G4 MDD running 10.3.9. After switching on Internet Sharing within System Preferences on the iMac, the G4 picks up and connects to the network created by the iMac, which is called (My Name)'s iMac.
    All very straightforward, and until a few days ago this set up worked perfectly.
    Then I decided to upgrade the iMac from 10.5.1 to 10.5.3, using the Combo updater downloaded from the Apple website.
    As far as the iMac is concerned, the upgrade went perfectly and I have no problems whatsoever. I can still access the internet without difficulty as before.
    The problem is with the G4. It no longer picks up the network from the iMac. The network's name ((My Name)'s iMac) no longer appears in the drop-down list under the Airport icon in the G4's menu bar (although this list does still contain the names of various neighbours' networks, as it did before, so the Airport in the G4 does still seem to be functioning). Internet sharing on the iMac is still switched on, and the Airport icon in its menu bar indicates that it is "transmitting", but the G4 is just not "receiving" any more. As a result, we can't get online on the G4.
    I would be very grateful if anyone could shed any light on this problem. If there is any further information I can supply which might help, please ask.
    Steve

    Hi SteveSCA-
    Greetings and welcome to the Apple boards
    Have you tried powering everything down and then back up again?
    Have you repaired permissions on the iMac?
    Luck-
    -DP

Maybe you are looking for