HP x280n & MP4 files in Windows Media Center

Hello guys,
I am new here. I was wondering if anyone has gotten mp4 files to playback in windows media center.
container: mp4
video:mpgeg-4
audio track 1: 2 channel stereo aac
audio track 2: 6 channels ac3
I can watch the same file via smartconnect but not through windows media center extender.

@breezytm
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Similar Messages

How to play MOV files inside Windows Media Center Edition

I've installed QT Pro, but am not able to play MOV files inside Windows Media Center Edition (MCE). Under "My Videos" from the MCE main interface, I can see the files, but once selected, error message indicates unknown/unplayable file type.
How do I get my MOV files to play inside Windows MCE??
Marc

Quote from: cosmosk on 05-April-05, 22:29:47
I don't use MSI's MC application so I can't directly answer your question.
However both Win DVD 6 and PowerDVD6 play them just fine by launching the ts.ifo file.
Yes, I know that, but that means that I should use at least two applications. I need only one front end to launch all my media files, inluding ripped DVD files, not as separate VOBs but as whole movies decribed in IFO files.
Kiero

Possible Windows Media Center Conflict When Viewing .FLV FIles

I am running IE10 on Win7 and just downloaded Flashplayer 11.8.800
I verified the download via the Manage Add-ons list in IE10 and saw that Shockwave Flash Object is available.
I also verified that FP ActiveX - with the correct install date - is among the populated programs in my Uninstall list of the Control Panel.
However, in my WIN7 Default Programs details all .flv files are associated with Windows Media Center and when I try to change that association there does not appear to be a way to link the .flv files to the Flash Player
or a way to disassocaite the .flv files from Windows Media Center.
With the setup the way it is now, when I download a .flv file and try to run it,
Windows Media Center tries to run it and gives me an error that the file type or the codex that created compression may not be supported.
How do I get the .flv files to run?

I use VLC media player for downloaded FLVs http://www.videolan.org/index.html

How can I convert the metadata tags on my mp4s to xml files so that they can be read in Windows Media Center?

I have a library with almost 3000 movies and TV shows that I have fully tagged. However, I have decided to start using Windows Media Center and it does its metadata tagging through XML files. I wanted to know if anyone could tell me if there was a way to extract the metadata from those mp4s and convert them to a format that WMC could read? Thanks!!!!

iTunes can make XML playlists so it might be all you need, I made a simple one file playlist and exported it from iTunes. The result is shown below. In principle I could delete the playlist and the entry from the library, as long as I don't delete the file, then later reimport the XML playlist file. I haven't tested this particular scenario, but I assume that iTunes will read all the properties as listed unless it can read some kind of tag from the file itself in which case the current value of the tag would take precedence.
What I don't know is what media center would make of this file, or what its files look like, however assuming they have a similar structure that can be decoded then it should be possible to read data from the iTunes library and write out a text file that will make sense to media centre.
Video Test.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Major Version</key><integer>1</integer>
<key>Minor Version</key><integer>1</integer>
<key>Date</key><date>2013-09-26T23:30:26Z</date>
<key>Application Version</key><string>11.1</string>
<key>Features</key><integer>5</integer>
<key>Show Content Ratings</key><true/>
<key>Music Folder</key><string>file://localhost/E:/iTunes/iTunes%20Media/</string>
<key>Library Persistent ID</key><string>CCF046191585EA85</string>
<key>Tracks</key>
<dict>
<key>155170</key>
<dict>
<key>Track ID</key><integer>155170</integer>
<key>Name</key><string>Abbott & Costello: "Two Tens For A Five" & "Who's On First"</string>
<key>Artist</key><string>Abbott & Costello</string>
<key>Album Artist</key><string>Abbott & Costello</string>
<key>Album</key><string>Abbott & Costello: "Two Tens For A Five" & "Who's On First"</string>
<key>Genre</key><string>Comedy Clip</string>
<key>Kind</key><string>MPEG-4 video file</string>
<key>Size</key><integer>110483524</integer>
<key>Total Time</key><integer>532096</integer>
<key>Year</key><integer>1950</integer>
<key>Date Modified</key><date>2013-06-19T17:35:18Z</date>
<key>Date Added</key><date>2012-12-01T17:30:57Z</date>
<key>Bit Rate</key><integer>156</integer>
<key>Comments</key><string>www.dvdvideosoft.com</string>
<key>Artwork Count</key><integer>1</integer>
<key>Persistent ID</key><string>5AF2C490D1E065CD</string>
<key>Track Type</key><string>File</string>
<key>Has Video</key><true/>
<key>HD</key><false/>
<key>Video Width</key><integer>1136</integer>
<key>Video Height</key><integer>640</integer>
<key>Location</key><string>file://localhost/E:/iTunes/iTunes%20Media/Home%20Vide os/Abbott%20&%20Costello_%20_Two%20Tens%20for%20a%20Five_%20&%20_Who's%2 0on%20First_.mp4</string>
<key>File Folder Count</key><integer>3</integer>
<key>Library Folder Count</key><integer>1</integer>
</dict>
</dict>
<key>Playlists</key>
<array>
<dict>
<key>Name</key><string>Video Test</string>
<key>Playlist ID</key><integer>1930541</integer>
<key>Playlist Persistent ID</key><string>30BF2769C94F7F29</string>
<key>All Items</key><true/>
<key>Playlist Items</key>
<array>
<dict>
<key>Track ID</key><integer>155170</integer>
</dict>
</array>
</dict>
</array>
</dict>
</plist>
Such files are easier to interpret if opened with Notepad++.
tt2

When I click on a pdf file, it goes to Windows Media Center

I have Vista and upgraded to IE8 about a month ago. Now when I click on a pdf file, it goes directly to the Windows Media Center. I have no idea what's going on or how to fix it.
Suggestions?
Thanks in advance

Somehow, PDFs have become associated with Media center as the default application for opening them.
Right click a PDfFand choose Properties.
To the right of Opens with, there is a Change button. Click it and select Adobe Reader from the list of programs.
Click OK, Check the box to always use the selected program to open this type of file (If it's clickable), then click Apply and OK.
A reboot may be necessary.

Windows movie maker/ windows media center question

I have a camera that records video in .mov .h264 format that I save on my pc using windows live movie maker. It converts it to a wmv video format still in the 1080P resolution it was shot in. The question I have is that when I go to burn these files to a dvd using windows media center does the resulting video end up down converted to standard definition instead of the HD it was saved as. Is there something I have to change in the settings on windows media center to be able to burn these files in same 1080P resolution it was filmed in, or do I have to convert the .mov files to something other than Windows media video to be able to keep the HD quality, or do I need a different burner other than DVD(blu-ray) for example to be able to burn these files. I have a blu-ray player.

I'll let others answer the question on Windows Movie Maker...
Keep in mind if you put an HD video on a DVD... not all DVD players will support it. You may wish to burn to a Blu-Ray disk.
Personally I use Premiere Elements or Pinnacle Studio. I create an MP4 file and then save it to a DVD for those without Blue-Ray

N95 and windows media center..

the 2 don`t seem to like each other .. so i`m now stuck with a laptop that will not talk to my mobile .....the laptop says it is a reconized
has anyone got any ideas how to get round this .. please

I do not think you can do this unless you can convert the Windows Media Center recording to a type of file which is supported by Verizon Media Manager. Media Center files have an extension of *.dvr-ms. Verizon Media Manager ONLY supports .avi, .wmv, .flv, 3gp/3g2, .mpg(non-mpeg 2 videos) and .mp4/m4v files. I have been meaning to try this as well, but have not yet.
Can anyone recommend a good and free video converter for this?
Blame MS for this... that is using a propriety video format...
Let us know if successful.
-oceanx

Media manager and windows media center

How do I set the Fios Media manager to stream content from the Windows media center to the TV? I was able to set up media manager on a Vista desktop. Would like to set it up on 64 bit new laptop that can be upgraded to windows 7. Please provide step by step instructions.

I do not think you can do this unless you can convert the Windows Media Center recording to a type of file which is supported by Verizon Media Manager. Media Center files have an extension of *.dvr-ms. Verizon Media Manager ONLY supports .avi, .wmv, .flv, 3gp/3g2, .mpg(non-mpeg 2 videos) and .mp4/m4v files. I have been meaning to try this as well, but have not yet.
Can anyone recommend a good and free video converter for this?
Blame MS for this... that is using a propriety video format...
Let us know if successful.
-oceanx

A700 blue screen of death when performing Live TV Search in Windows Media Center

I just got my new Lenovo IdeaCenter A700 today and have been busy setting it up. I was trying to set up the TV on it, and used Windows Media Center. I plugged the tv cable in to the back of the computer and selected "live tv setup". I then put in my zipcode and it was downloading some things and then came up with a blue screen. When the computer restarted the information below was the MS error message. I have attached the files mentioned in the log. This happened to me twice.
Hope you can help.
Please let me know if you need anymore information.
Problem signature:
Problem Event Name:   BlueScreen
OS Version:   6.1.7600.2.0.0.768.3
Locale ID:   1033
Additional information about the problem:
BCCode:   4a
BCP1:   0000000076E5FF2A
BCP2:   0000000000000002
BCP3:   0000000000000000
BCP4:   FFFFF8800AADECA0
OS Version:   6_1_7600
Service Pack:   0_0
Product:   768_1
Files that help describe the problem:
C:\Windows\Minidump\102110-15849-01.dmp
C:\Users\fennis\AppData\Local\Temp\WER-36941-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\windows\system32\en-US\erofflps.txt

Update Windows and all drivers, download newest video driver from AMD website, you have some software issue.

Premiere Elements cause problems with Windows Media Center while streaming to TV.

I was having the following problem:
The audio from the streaming process of a recorded TV show on my HP computer to the remote receivers, a Sony Blu-ray player and/or a Sony Streaming Player, results in the loss of audio signal at exactly 30 seconds from the beginning on either devices. The video continues on as normal.
A user on the Windows 7 forum had the following possible cause and solution. His response was as follows:
I "solved" my issue, at least partially. Turns out for me a codec installed by Adobe Premiere Elements for audio (Main Concept) was causing mfpmp.exe to fail (you should see it getting an appcrash in the event log two or three times as soon as you start playing the media remotely.) This program is used by microsoft for DRM. I went through and one by one remained the various attached (non-microsoft) modules until i found the one that caused the appcrash. I haven't fully figured out if Elements is now negatively effected, but that's for a different forum.
I tried the quick fix by un-installing Adobe Premiere Elements. The uninstall solved my problem with Windows Media Center, but I want to re-install the software but I do not want to recreate the problem with Windows Media Center.
Is there another solution for this problem?

I reinstalled Adobe Premiere Elements 10 and the above mention problem reoccured. With a little detective work I was able to determine that the file causing my problem was "mc_dec_dd_ds.ax". I am not sure what this does to Adobe Premiere Elements 10 since I removed (renamed) the offending file. A strange side affect, renaming the file did cause an increase volume. Strange.

Is there or can Microsoft develop a app for smart TVs so you can stream from Windows Media Center

I have used Windows Media Center for years to record TV programs and have even sertup my kids Xbox 360 as an extender. I've recently purchased a smart TV which allows me to steam music and home videoes from Windows media player but ofcourse the .wtv
files will not play. Would it be possible to develop an app for Smart TVs and other devices so they can be used as extenders. I'm sure many people would be willing to pay for the app. I've tried some 3rd party extenders and not been
happy with there performance and I'd like to not need another box and remote. I'm sure these new TVs have the ability to do it will microsoft allow them too?

Hi,
I agree with S.Sengupta.
You may contact the support of the smart TVs and request a tool to match Windows media player.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

'Windows Media Center Receiver Service' stops and cannot be restarted

Hi,
I have had some issues with running my Hauppage TV Tuners (WinTV-HVR-2200) on a new Windows 7 Home Premium Installation.
After installing the TV Tuner card, drivers and WMC support software - I am able to configure my TV channels through Windows Media Centre and all is working fine. I can watch and record TV, so it all seems to be OK. It is only AFTER I restart my computer
that I get an error 'Viewing/Listening Device is currently not available' when trying to watch TV in WMC again.
I troubleshooted this issue and found that 'Windows Media Centre Receiver Service' was not running and when I tried to restart the service (via services.msc) it comes up with the following error:
"0x80070003: File path not found"
I have checked the Windows directory for ehrecvr.exe (the file that the service is linked to) and it is not corrupted or moved but I cannot re-link or restart the service.
I tried the following tasks to remedy the issue and none of them were successful:
Run SFC from cmd prompt - no issues were found
Changed the 'logon' details for the service from Network to Local
Changed the start type of the service from manual to automatic
Restored previous versions of windows - prior to windows updates
Re-install TV Tuner drivers and software
Updated to the latest drivers and software version of 'WinTV' (Hauppage TV Tuner Software)
Complete new installation of windows, including a format of the HDD - without installing additional third party software or anit-virus software
Re-seat the TV tuner in a new PCI slot
The only way that I am able to remedy the issue is if I disable and then re-enable WMC via 'optionalfeatures'. This then allows the service to start again, I can then configure my TV tuner in WMC but it still has issues after restarting the PC!
It would appear that by configuring the TV tuners in WMC, it causes a conflict in the service so that it cannot be restarted after it is stopped. Note: I can start/stop the service with the TV tuner cards installed on my PC - it is only when I configure
the TV channels in WMC that it then has issues.
I have had these TV tuners running without any issues for over 2 years; however I have upgraded the motherboard and CPU and this issue has only just started happening. I am at a loss of what to look at next...
Any help would be much appreciated!
Thanks

I shall suggest you :
1. uninstall WinTV software and reinstall WMC from the scratch.
2. Disable AV or any other internet security application during configuring WMC.
3. Update the TV Tuner card driver from Hauppage's website (only WMC driver and no other application)
Run Setup Again.
Open WMC > Tasks > Settings > General > Windows Media Center Setup > Run Setup Again
Does it help?
If the above doesn't help then try resetting WMC:-
Open Control Panel > Uninstall a Program > Turn Windows Features on or off > Scroll down to Media Features > Uncheck the box against Windows Media Center > Follow on screen instructions > Reboot > Again open Turn Windows Features on
or off under Control Panel > Scroll down to Media Features > Check the box against Windows Media Center.
Now reconfigure WMC again
S.Sengupta, Windows Entertainment and Connected Home MVP

Accessing Mac media in Windows Media Center 7

Hey all. Just started to delve into Windows 7 on my MacBook Pro and am very eager to try out Windows Media Center, especially for the potential usage I could benefit from by linking it with my XBox 360. Anyways, I'm trying to make the source of media be my iTunes folder on my Mac Partition and I can find it, select it and do not understand why Media Center cannot access it. I've tried opening the mp3 files in Windows explorer and opening them in Windows Media Player and they work fine, but Media Center is having issues opening them. Any ideas on how to fix this and make it work? THank you.

Hi Casey,
I don't use Media Center but it might be that by default a BootCamp Windows has only read-access to the OSX partition and cannot write to it.
It might be that Media Center is trying to write 'something' to the mp3 files and because of failing to do so does not open them.
MacDrive http://www.mediafour.com/products/macdrive/ gives Windows complete read and write access to the OSX partition.
Regards
Stefan

Mac + Windows Media Center

I currently have both a pc and a new Macbook. On my pc i use Windows Media Center to record tv shows that i've missed. I'm able to network the two computers to view and share files however i can't play the recorded shows on my Mac. I see them in the shared file but its not opening it. It says "Error opening movie". Can anyone please help me? I'd really like to watch my recorded shows from my Mac laptop and not have to be stuck behind my pc. Please Help???
Thanks

You need to export the Media Centre recordings into a format which will be viewable on the Mac.
Taken from the Media Portal Forums
Here is a quick guide to strip off the ASF wrapper MS use for their DVR-MS file format. This is used in MediaPortal for recording with MPEG-2 capture cards like the Hauppauge PVR-250 / 350 models.
What you need to have...
1. Graphedit http://www.digital-digest.com/dvd/downloads/graphedit.html
2. Cyberlink DirectShow filters MPGMUX.AX & CLDUMP.AX (You'll have to find these)
What you need to do...
1. If not done already register the two filters listed above from the directory where they have been installed.
regsvr32.exe MPGMUX.AX
regsvr32.exe CLDUMP.AX
2. Start Graphedit and the click 'File' then 'Render Media File'
3. Choose the *.DVR-MS file you wish to make into a *.MPG equivalent.
This will automatically build a Graph ultimately providing an output to the Video Renderer and Default DirectSound Device.
4. Remove all filters except the *.DVR-MS output box.
5. Click on 'Graph' then 'Insert Filters' within Graph Edit.
6. Go to the 'Direct Show Filters' section and add 'Cyberlink MPEG Muxer' (MPGMUX.AX) to the Graph.
7. Now add the 'Cyberlink Dump Filter' (CLDUMP.AX) to the Graph and it will prompt for a filename give it a name with a .MPG extension. i.e. Test.mpg.
8. Leave the Filter addition window and connect the DVR Out-1 connector to Audio In on the 'Cyberlink MPEG Muxer' on the Graph.
9. Also connect the DVR Out-2 connector to Video In on the 'Cyberlink MPEG Muxer'
10. Next connect the Output pin from the 'Cyberlink MPEG Muxer' to the 'Cyberlink Dump Filter'
11. You are now ready to get your MPG equivalent file click on 'Graph' and then 'Play' (or click the green play button)
12. You'll notice a green progress indicator moving from left to right. Once complete you will have successfully dumped your MPG file in the same quality it was recorded without re-encoding!!!
Note: The MPG file should be slightly smaller the the original. Don't worry if they are not exactly the same size as we have stripped off the ASF guff.
You can do what you want with the MPEG file. i.e. Convert to AVI, Deinterlace it, Crop It, Resize it, Burn it to DVD/SVCD...etc etc
It worked fine with the two files I tried, but I then ran out of time to try doing something with the resulting MPG files. As I was using RDC to connect into the Media Centre, even playing them wouldn't work as expected. I did try VirtualDub but it didn't like the mpg file, but I am not sure if this was a RDC issue or an issue with the mpg files.

TS1717 i recently downloaded two tracks from itunes: they will not play in my windows media center even though i have added them to that location. any idea what other trouble shooting i can attempt on this issue??

i recently downloaded two tracks from itunes and they will not play in my windows media center. i have never had this problem but the two tracks play on my PC just not in the windows media center and usually all my itunes music plays in there no problem??? any idea what to do? thanks

I'm searching for an answer to almost the same exact problem, using almost the same exact hardware and software. Has an answer been found?
The files that I'm trying to burn come from eMusic, and they are formatted mp3. Recently, (after the iTunes update to 9.2.3?,) they would not drag and drop from iTunes into Toast. From several different discussions I've tried working around this by dragging to the desktop first then dragging and dropping to Toast, going to Toast from a programmer's homemade help window, " iToons," and today, after talking with Apple support, going directly to Toast from my eMusic folder. Alas, all recordings do not perform like they use to. Sometimes they play and sometimes not. There is one I managed, that is listenable, but sometimes I have to put it in my car stereo over and over again as it gets ejected with an error code, sometimes, finally it takes it... Some of the recordings on other disks I've burned are not clean - they have white-noise sounds creeping in... I use to have none of these problems. One time as I was listening to a CD that managed to play, and it just stopped playing... Is there an answer out there to get back to how it use to be? Thanks for you help.

HP x280n & MP4 files in Windows Media Center

Similar Messages

Maybe you are looking for