HP- XP and VISTA Tattoo DMI process

I'm attempting to setup tattoo CD for XP and VISTA. Any and all info would be helpful. Where do I find the utility? Which version supports XP and/or Vista. Is a boot disk/CD required to launch tattoo DMI utility? Is there a way to test utility on good PC.

Talk to your local HP authorized repair shop.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Similar Messages

Remot Control For Digital@nywhere ATSC and Vista Don't Work Together Very Well

I have a Digital@nywhere ATSC tuner card w/remote.
On Windows XP, the remote worked ok. On Windows Vista, the remote works only some of the time.
On Windos XP, the BDA drivers and utilities on the install disk loaded fine. Not so with Vista.
On Vista, the utilities on the install disk seem to load fine, but the BDA drivers fail.
Loading the Vista Digital@nywhere utilities gets the tuner card to work, but has no drivers for the remote. Leaving me to load the utilities from the install disk, and and the BDA drivers from the Vista Digital@nywhere files. A rather tedious process, with the remote only functioning sometimes.
I have tried every trick I can think of to get the remote control and Vista to work together, to no avail. I'm stumped.
I'd rather not go out and buy a new tuner card, when the Digital@nywhere ATSC tuner card works fine on Vista. I'd just like to have a remote control that works fine too. But I don't.
I hope an answer can be found for this problem.
If I haven't been clear enough, just ask, and I'll try to explain things better.
Thanks for any help that anyone can give.

Are you using Media Center in Vista? If so, buy a Media Center remote, should work with no problems.

Acrobat 7.0 Pro and VISTA

Just FYI,
Acrobat 7.0 Pro does not work with Vista. It will continually ask for re-activation even though it is activated the first (and subsequent) times.
This is not a complaint. Acro 7.0 preceded (and was never intended for) Vista. Just thought it would be helpful to have this fact clear (to avoid calling customer support and being told on the SECOND call that this is the case).
Will definitely upgrade to Acro 8 or 9. Acrobat is an invaluable tool.

You may get a few responses. A few have apparently been successful with AA7 and VISTA, but I am not sure of the stability of such installations. You might want to provide a few more details of what you have run into, installation process, and such, so that they might answer. I think your data may be adequate, but if you have more it would help. The upgrade is likely a good idea in any case.

Acrobat 7 and Vista

I have read a number of reports of the problems people were having with acrobat 7 pro and vista so I thought I would report how I got it to work for me. My hardware is a new notebook running Vista Home Premium SP1 with all current updates. After installing off the original disk acrobat 7.0 would not start. I went to adobes site and downloaded the 7.09 update but when I ran it I got the message it could not find a program to update. Then I downloaded update 7.05 and it installed fine and the program worked without a hitch so I made a restore point in Vista. Acrobat started to update itself to version 7.10 and I decided to let it to see what would happen. After the update it opened fine and all the features I normally use work fine. Must say despite all my apprehensions Vista seems to be working fine for me. All my old programs are working including lots of specialty programs( marking, testing, cad) even my 7 year old version of autocad is working fine in wind 2000 compatibility mode. Crossing my fingers and hoping this continues.
topryan

It may seem to work fine, but you will likely have problems along the way. The activation issue may be that you did not deactivate it from the previous systems before you installed VISTA. If that is the case, you may be out of install rights. If you still have the older systems, deactivate Acrobat there.
As mentioned, you may still not have luck with AA7 on VISTA. Acrobat may open fine, but most likely you will have to use the print to file feature when printing to the Adobe PDF printer (if it even installs - in that case use a PS printer and possibly rename it to Adobe PDF). You would then have to open the file in Distiller to get a PDF. To automate the process a bit in such a case, you can set the printer port to file, rather than PDF Port. If it works without such changes, you are lucky. Even with the changes it may not work correctly. Good luck.

Windows XP Pro (32-bit) and Vista Ultimate (64-bit) on the same Mac Pro HD?

Has anyone been able to install both Windows XP Pro (32-bit) and Windows Vista Ultimate (64-bit) on the same dedicated Windows hard drive? I have four HD in my Mac Pro, and one of them is dedicated for Windows (and bootable via Boot Camp). I found the following technical articles about installing Windows XP & Vista on the same hard drive (using two separate partitions) using a VMWare machine as the test system:
http://apcmag.com/howto_dual_boot_vista_and_xp_with_vista_installed_first__the_stepbystepguide.htm
http://apcmag.com/howto_dualboot_vista_with_xp__stepbystep_guide_withscreenshots.htm
Has anyone successfully installed Windows XP (32-bit) and Vista 64-bit) on the same NTFS partition?
I already have Windows XP Pro (32-bit) SP3 installed on my single NTFS hard drive. I am looking for the best way to add the Vista 64-bit installation on the same hard drive.
Any thoughts and advise are appreciated.

Windows has its own list of boot OSs, and default, from msconfig. It will sit and wait for xx-seconds on startup in Windows if you want to boot from an alternate.
As to whether Apple's OS Switcher (aka startup disk bootcamp control panel or tray icon) sees both, I had Windows Home Premium and Ultimate 64, and pretty sure OS X saw both. That was pre-Leopard and before there were 64-bit Apple drivers.
I can't think of any scenerio of wanting to mix 32-bit and 64-bit on the same paritition, you realize you can't install the one over the other and must do a clean install.
When I added a partition out of main partition (I wanted to put search index and page file on their own partition) those partitions aren't seen - are hidden - to Leopard.

HT2477 I just purchased the IMac and was in the process of setting it up and got locked out. A password is being requested and I did not establish one. Is there a default password for the imac?

I just purchased the iMac and was in the process of setting it up and it locked up, requiring me to put in a password. I never established a password, does the iMac have a default password?

If you have been using the mac.com Apple ID to make iTunes purchases recently, then there should be no issues continuing to use it with the new iPhone. I would abandon the new ID as you will never get Apple to merge the two IDs. I have had a mac.com ID for years and continue to use it with my iPhone 4S.
Tell us the issues that you encounter trying to set up the iPhone with the mac.com account.

Problem with standby and Vista

Hi!
I've a problem with my X61 with the Turbo Memory and Vista x64: When I install the driver for Turbo Memory, I cannot resume from standby. The notebook does only a "normal" reboot.
Can anybody help me with this problem?
scw

well after a lengthy talk with many microsoft reps i found something. I was an updated version of this "WUDfrd.sys" file. But the problem was that i could not see a download link. but after a little while i convinced microsoft to give it to me. at first it looked like it had potential but after i restarted, every went down the plug hole. here is the link that i was talking about.
http://support.microsoft.com/kb/933607/en-us
problem still not solved and not looking to be solved for a long time by the looks of things.... NOT HAPPY JAN!!!

Firefox mage quality and resolution was superb when I used XP and Vista. Now that I have Windows 7, however (with the Firefox 3.6.3 version), the image quality and resolution is poor. Please help me!

I am using the Firefox 3.6.3 version with my new Windows 7 operating system. When I used all the previous Firefox versions in my XP and Vista operating systems, image quality and resolution was excellent! However, now that I have upgraded to Windows 7 and Firefox 3.6.3, the image quality and resolution is poor (unacceptable for downloading purposes).
== This happened ==
Every time Firefox opened
== I first activated my new computer and installed the Firefox 3.6.3.

All my images are pixelated in firefox 3.6.3
http://www.dcgdcreative.com
Not only on my site but on most sites I view.
The issue is not solved by resetting the zoom text view (ctrl+0)
The issue is not resolved by starting in safemode with add-ons disabled
The problem seems to only affect .jpeg files and only on Windows 7 on my desktop; as I have viewed several sites using windows XP with my laptop, no issues.
I had the same issue with IE8 and was able to fix the problem with by setting up the compatibility view for all sites. Issue fixed no problems at all. But nothing similar for firefox?
Whats the deal?

Using VMWare Fusion and Vista for NetFlix Watch Now

Hi, I have installed Fusion and Vista in order to use NetFlix's Watch Now feature on my MBA. The installation was easy and Vista seems to be working fine. However, I can't get the Watch Now movie going. The film will start (after NetFlix determines my internet speed, etc.) and alternate between play and pause. Has anyone used this combination with success? Would a downgrade to XP work better? Or I should just use Boot Camp? Thanks.

I've used WinXP with Fusion on a MacMini and it was fine (but faster in BootCamp). I'm currently running Vista Business on a MacBook Pro in Parallels and while it isn't slow, it certainly is slower than in BootCamp. I expect Fusion would run Vista a bit faster - Fusion does tend to be a bit faster than Parallels but Parallels seems to get along better than Fusion with one of the applications I'm using.
There are advantages to BootCamp and BC isn't incompatible with virtualization. I suggest that you go ahead and install Vista in BootCamp. If you haven't already bought Fusion, download the demo and see how it runs using the BootCamp installation and compare that to BootCamp itself. Then decide.

P1006 - networked with XP and VIsta-64 not printing more than 2 pages

Hello - I have a dilemma with my HP P1006. I have the printer directly plugged in (USB) with my XP (32bit) PC. I have a Vista-64 PC networked with it. Both (XP-32 and Vista-64) are plugged in directly to the router (not wireless). My question is why can I not print more than two pages at a time with items opened on the Vista-64 PC? I CAN print more than two pages with items opened in the XP-32.
Things I've done:
1 - uninstalled everything & reinstalled the latest drivers for the XP-32.
2 - marked the printer as "sharing" on the XP-32.
3 - confirmed the printer is marked "enable bidirectional sharing" under the printer properties on the XP-32 PC.
Things I perplexed about:
1 - why won't items (docs, webpages, etc.) print more than two pages at a time from the Vista-64 PC?
2 - is there any reason that I should download a driver for the Vista-64 OS? If so, which PC do I download it to?
3 - I have another printer (Lexmark inkjet) connected in the same way (except it is a serial port not USB) and it can print more than two pages of a document at one time with no problem from either the XP-32 or Vista-64 PC? Why?
Any thoughts on this situation? Any suggestions are greatly appreciate.
Thank you - Jane.

Hi!
I just get a system message at teh bottom of teh screen saying "output cannot be issued " and it remains on teh same screen . I goto t-code va23 and enter my quotation number and on the top I select sales document ...issue output and select my output type and print preview or prnit , it comes out of that screen into the first screen and at the bottom gives msg "Output cannot be issued". I beleiev its not allowing the smartform to display when there are more than 2 pages , because I tried it with a contact which has 2 pages and it shows output but when I try with the one having more items i.e more than 2 pages it comes out of it . Its a smartform issue and something in the smartform is causing problem I beleive.
Thanks

ITunes 7.1 and Vista

Have brand new HP pc with Vista factory installed with 4 gig ram, 1 terabyte hard disk, duoCore Intel Processor.
The new iTunes crashes Vista often all the way to a blue screen of death and trashes it's own database. Using the little widget that shows CPU usage, iTunes when it runs, by itself consumes 70-90% of the processor time (I think its the search function in idle). Love iTunes but it just doesn't play nice with Vista still!

wow! Thats a beast of a PC. I am jealous! This may help you out some:
http://docs.info.apple.com/article.html?artnum=305042
http://docs.info.apple.com/article.html?artnum=302856
iTunes and Vista haven't been playing nicely together. It should works itself out with the next iTunes update.
Good Luck,
Rachyl

My iPod Classic 160GB is recognized by computer, and goes through sync process, but still has old stuff...

My iPod Classic 160GB is recognized by computer, and goes through sync process, but still has old stuff...
I feel like there must be an issue with the library location, but I don't know how to correct that. My Dad recently wiped my computer and deleted Windows XP and installed Windows 7. I don't know what he did, but my iTunes library is still intact it seems. However, I've added quite a few podcasts that I'd like to sync to my iPod. When I connect it, it goes through the sync process, but ends quickly and says its safe to disconnect. None of the new podcasts are on there though.
Also, there was something really wrong with my iTunes account. When I went to buy something from the store, it wouldn't accept my password, and when I went to reset it, it wouldn't recognize my birthdate and month (I had the correct username). I ended up creating a new account and purchasing a song. This time, it did sync the new song onto my iPod, but not the podcasts I'm trying to sync.
As far as the library location, is there anything particular that has to be included in that library in order for it to be recognized by iTunes when you sync? Awhile back (before my Dad worked on my computer), I had changed the folder location to my external hard drive, but in researching, I saw that I still had in another drive some folders with music that is currently on my iPod. So it looks like I have some stuff on two different drives... Maybe this has something to do with it not syncing right?
I did check, and my Firewall doesn't have iTunes blocked.
As you can see, I'm not very experienced with all of this... Sorry for the confusion. If you are interested in helping me and have any questions, please let me know.
I'm hoping someone will be able to help me... I desperately want to be able to listen to my podcasts, as I'm a stay-at-home Mom of 4 little ones, and the podcasts are kind of an "escape" for me when the children are napping or playing. :-)
Thank you in advance for your help!

Oh my goodness!! I am absolutely thrilled right now B-rock!! I don't know how I missed it, but when I went back to change the setting like you mentioned, I noticed that the very top box that says "Sync Podcasts" wasn't checked! I have no idea why... But my heart started to race when I checked that box and all of a sudden it started syncing all my podcasts!! It's gonna take a long time (I have 385 of them!), but I am just so happy you helped me with this problem. Thank you SO much!

Satellite M40-225 and Vista PCMCIA driver

I lost my original disks for my M40 so bought a copy of Vista to install on my computer, when I first installed it the computer would not start up so I looked on the internet and it seems there is a conflict with the PCMCIA drivers and Vista. I followed the advice on the forum and managed to get vista to load by deleting all the files relating to the PCMCIA drivers.
Vista now loads but I am unable to find update drivers to get the PCMCIA slot running. I use this port for my wireless internet has the internal one was very slow with my router. Ive tried downloading the drivers from Toshiba but there is no Vista ones. Ive reinstalled the originals but they still dont work although Vista now loads. Does anyone know of a solution to my problem?
Thanks Steve

Hi
First of all the M4 I dont understand why there is a conflict between the PCMCIA drivers and Vista!
The drivers are included in the Vista OS so how did you remove such drivers and how did you install the Vista on this notebook?
Furthermore the notebook supports the PC card slot and you can use the PCMCIA R2.01, PC Card 16(multi-function card) and PCMCIA 32bit cards. The BIOS controls this slot.
Maybe you have to update the BIOS before you will install the Vista on this unit!!!

Fingerprint Software 5.8 for Windows XP and Vista (32-bit)

Fingerprint Software 5.8 for Windows XP and Vista (32-bit) points to:.
Version: 5.6.2.3650 Release Date: 2007/09/27 which is OLD!!!!
we ar stiil waiting for new driver? package? .. have lot's of customer which acan not help! to fix their machines?
If you have a woman with smal hands/wingers .. there is no way to make it WORK!!!
When will we see new turbo memory drivers?? Have more than 50 customer/notebooks wit turbo memory diabeld. as it not usable, but they have paid for a product!!!!
Come ON !!
Message Edited by TeMpL on 07-09-2008 07:29 PM

Hi there!
Please see this thread for the download links for the Fingerprint Software 5.8 ....
This issue was already raised in the ThinkVantage subforum here at Lenovo Forums and it is resolved.
Regarding the Turbo Memory, please keep in mind that the hardware only works with Vista. Windows XP does not support turbo memory thus the piece of hardware is rendered useless. With regards to Turbo Memory usage in Vista, the latest drivers do fully support the card in Vista and since there are no technological changes, there is no need for additional or new drivers.
Hope this helps!
Steve
Message Edited by icantux on 07-09-2008 02:28 PM

My iPhone 4s is not switching on, I connected it to itunes thru my Windows 7 laptop and it says phone needs to be restored. I clicked okay and it started the process however the progress bar with the apple logo is on the screen, progressbar do not start

My iPhone 4s is not switching on, I connected it to itunes thru my Windows 7 laptop and it says phone needs to be restored. I clicked okay and it started the process however the progress bar with the apple logo is on the screen, progress in the bar did not start yet after 5 hours. Some one please hep me.

I did put it in DFU mode but its still not working, although everytime it shows your iphone needs to be restored. Kindly help.

HP- XP and VISTA Tattoo DMI process

Similar Messages

Maybe you are looking for