HP XW4300 F10 no respond
Hello, I need to go into bios setup because i get error 101 an add-in card installed is not working correctly.
This is a video card like a was intented to upgrade the original one, after I come to the old one again, but still the error on, at this time the F10 do not respond and also don't boot the operating system, others key work good like F9 or F1, the machine reboot but don't go more than the first screen where ask me for F1 F9 OR F10 option.
Thank you for any help
Fabian
Hello Fabian
The HP XW4300 is a commercial Workstation and this is the HP Consumer forum. I suggest posting in the HP Commercial board for a better chance at finding a solution.
HP Commercial Workstation Forum
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.
Similar Messages
-
1) I bought a HP 255 .. preloaded with licensed windows 8.1 (overpaying about $ 150 compared with the same nout. with pre-dos ,
2)yesterday update the "BIOS" -UEFI- from HP website and on the recommendation and with the help of an assistant "Assistant HP",
3)reload (successfully re-entered the windows 8.1), and
4) wanted to put second OS (ubuntu Linux without removing the windows 8.1, which is totally legal action and a 100% user right !) in accordance with the instructions http://www.everydaylinuxuser.com/2014/05/install-ubuntu-1404-alongside-windows.html. (way before such procedures have been much easier! Have to completely abandon the windows!)
5)After compression partition with win8.1 and release empty partition for second OS( Linux), off in the control panel windows "Fast Boot" I turned off the laptop (which is turned off and not in sleep mode switched). entered the UEFI, Turn off secure boot and Legacy Boot (probably in vain!)
After saving and rebooting the laptop completely refused to accept from the moment of "power On" the F10 (et al. Keys esc, F2..12), and showed only "black screen" without any symbols and inscriptions, though, and respond to Ctrl-Alt-Del (blinking backlight -reload). external monitor also showed "No Signal".
If I understand correctly, UEFI has been "upgraded" (not for the better by m.), And then at boot became a special check windows loader (type bootx64.efi) th right?
1) where (is there?) correct installation instruction 2nd OS (for example Linux Ubuntu), without removing the pre windows 8.1 (with the new UEFI)?
2) what can be done? How can I enter the UEFI-"BIOS" to fix options (if i have not CD with windows8.1 liveCD, but have backup of pre-inst win8.1 from nout)?You can do that without going in the BIOS(UEFI). At the Start screen, type System Settings and hit Enter. There is a Boot Options tab there where you can make your boot choice. However, for when you do need to get in the BIOS in Windows 8.x, Shutdown the computer while holding down the Shift key. Then, on Startup, hold down or rapidly tap F2 while hitting the Power button.
Yes, you do have a Recovery partition on your HDD and you were advised to make recovery media when first using your machine for even further protection in the future. It's up to you whether you wish to make even further images. I do and I use Macrium also.
You need to spend some time with your User's Guide particularly starting on page 46 "Recovery of The Internal Storage Drive".
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit -
Volume button not responding (F10-12)
It was rare problem with Maverics 10.9, but after I updated it to Yosemite beta 5, now this problem appears everytime I make computer to sleep and open it. F10-F12 does not respond. It makes somekind of sound, but can't control volume. (Sound is OK), I am not using in System Preferences option to use volume button with FN, and it helps only after I restart my macbook in safe mode. First question, is there anyone now with this problem? And second, if this is not the MacBook Air (mid-2013) problem? I checked older topics - some people with Air had this problem, what about others? Is there any solution to it?
Since you are running beta software, you need to go to the developers forum, not here.
-
My sound control keys F10/F11/F12 do not respond at once this morning
How can I make them functioning again ?
Stirling Dad wrote:
Is there any way to either:
1. make the F10, F11 and F12 keys provide the mute, sound lower and sound higher functions?
that's the default isn't it? if it doesn't work for you uncheck the box "use F1..." in system preferences->keybaord&mouse->keyboard.
2. have the sound functions assigned to other keys and leave the F10, F11 and F12 keys with their display application windows, display dock and dashboard functions?
no. you can't reassign volume shortcuts. if you check the box mentioned above you'll have to use fn+F10 etc to get to them.
I've tried various settings in System Preferences -> Keyboard & Mouse, but without success so far.
Three sets of questions:
1. Is System Preferences -> Keyboard & Mouse the right place to be looking?
2. If so, how should I set the preferences to accomplish what I'm trying to do?
3. If not, what is the correct application, and what should I specifically do?
Thanks. -
"Firefox is already running but is not responding" error message and recent firefox update
"Firefox is already running but is not responding" error message is continuously popping up after the recent firefox update. I have nearly exhausted every possible solution to the problem as seen from the support page for this error message. I know someone who has the same issue on their computer and it also started right after the recent big update. Does the update have anything to do with this reoccurring issue? Is anyone else having this problem? Any other ideas on how to fix it? It would be great to get some help.
From what I have been reading from other posts on this forum, the
issue may be caused by the clear history settings.
Press the '''<Alt>''' or '''<F10>''' key to bring up the tool bar.
Followed by;
Windows; '''Tools > Options'''
Linux; '''Edit > Preferences'''
Mac; ''application name'' '''> Preferences'''
Then '''Privacy'''.
The button next to '''History''', select '''Use Custom Settings'''.
At the bottom of the page, turn on '''Clear History When Firefox Closes.'''
At the far right, press the '''Settings''' button. Turn on ONLY '''Cache''' and
'''Form And Search History''' leaving the others off.
This is not a cure but will make it easier if Firefox locks up.
'''https://support.mozilla.org/questions/997866?esab=a&s=&r=1&as=s''' {web link} -
I have had an interesting week. Beginning on Tuesday, my computer began acting unstable. Tried to reinstall the operating system - caused me to replace the current disk with my weekly backup disk. Yet, when I operate the current system, I find that programs (except those requiring video such as DVD player or Quicktime) work well but the finder is not responding. Was able to run EtreCheck. According to the report, the only process was that highlighted in red was com.apple.iconServices Agent.
I have repaired permissions and cleaned the cache. Attached is the report from EtreCheck. Any ideas what is going wrong and how to correct it? TIA.
Steve
Hardware Information:
Mac Pro (Mid 2012)
Mac Pro - model: MacPro5,1
1 3.2 GHz Quad-Core Intel Xeon CPU: 4 cores
14 GB RAM
Video Information:
ATI Radeon HD 5770 - VRAM: 1024 MB
System Software:
OS X 10.9 (13A603) - Uptime: 0 days 21:2:43
Disk Information:
HL-DT-ST DVD-RW GH80N disk8 : (7.43 GB)
ST3000DM001-1CH166 disk2 : (3 TB)
EFI (disk2s1) <not mounted>: 209.7 MB
Macintosh Initial HD (disk2s2) /Volumes/Macintosh Initial HD: 3 TB (2.51 TB free)
Recovery HD (disk2s3) <not mounted>: 650 MB
ST3000DM001-9YN166 disk3 : (3 TB)
EFI (disk3s1) <not mounted>: 209.7 MB
Macintosh (disk3s2) /Volumes/Macintosh: 3 TB (2.51 TB free)
Recovery HD (disk3s3) <not mounted>: 650 MB
ST4000DM000-1F2168 disk0 : (4 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 4 TB (1.33 TB free)
Recovery HD (disk0s3) <not mounted>: 784.2 MB
ST32000641AS disk1 : (2 TB)
EFI (disk1s1) <not mounted>: 209.7 MB
Macintosh Data (disk1s2) /Volumes/Macintosh Data: 2 TB (574.39 GB free)
USB Information:
PATRIOT (disk9s1) /Volumes/PATRIOT: 129.99 GB (10.36 GB free)
EFI (disk13s1) <not mounted>: 209.7 MB
4TB Macintosh HD (disk13s2) /Volumes/4TB Macintosh HD: 4 TB (2.1 TB free)
Recovery HD (disk13s3) <not mounted>: 784.2 MB
Seagate Backup Disk (disk5s1) /Volumes/Seagate Backup Disk: 4 TB (1.38 TB free)
disk4s1 (disk4s1) <not mounted>: 188.4 MB
disk4s1s1 (disk4s1s1) <not mounted>: 18 KB
Citizen Watch (disk4s1s2) /Volumes/Citizen Watch: 187.9 MB (Zero KB free)
LaCie File Storage (disk11s1) /Volumes/LaCie File Storage: 1.72 TB (798.34 GB free)
LACIE SHARE (disk11s2) /Volumes/LACIE SHARE: 280.06 GB (279.21 GB free)
TOSHIBA EXT (disk10s1) /Volumes/TOSHIBA EXT: 1 TB (773.59 GB free)
Seagate Backup Plus Disk (disk14s1) /Volumes/Seagate Backup Plus Disk: 4 TB (3.88 TB free)
FireWire Information:
LaCie d2 Quadra v2B 800mbit - 800mbit max
EFI (disk7s1) <not mounted>: 209.7 MB
LaCie Backup (disk7s2) /Volumes/LaCie Backup: 3 TB (625.64 GB free)
LaCie d2 Quadra v2B 800mbit - 800mbit max
EFI (disk6s1) <not mounted>: 209.7 MB
LaCie (disk6s2) /Volumes/LaCie: 3 TB (201.15 GB free)
Other World Computing OEM ATA Device 00 400mbit - 800mbit max
Thunderbolt Information:
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.adobe.SwitchBoard.plist
[not loaded] com.barebones.authd.plist
[not loaded] com.bjango.istatlocaldaemon.plist
[loaded] com.bombich.ccc.plist
[not loaded] com.dymo.pnpd.plist
[loaded] com.fitbit.galileod.plist
[not loaded] com.flipvideo.FlipShareServer.launchd.plist
[not loaded] com.iospirit.candelair.daemon.plist
[not loaded] com.iospirit.candelair.sync.plist
[loaded] com.macpaw.CleanMyMac2.Agent.plist
[not loaded] com.maintain.HideSpotlightMenuBarIcon.plist
[loaded] com.micromat.CheckmateIdleDaemon.plist
[loaded] com.micromat.CheckmateWorkerDaemon.plist
[loaded] com.microsoft.office.licensing.helper.plist
[loaded] com.prosofteng.DriveGenius.locum.plist
[not loaded] com.quark.quarkupdate.plist
[not loaded] com.smithmicro.schedulerdaemon.plist
[not loaded] com.sonycorporation.BloggieInstallerAgent.plist
[not loaded] fi.polar.polard.plist
[not loaded] PACESupport.plist
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist
[not loaded] com.bjango.istatlocal.plist
[not loaded] com.docudesk.deskpdf.userdaemon.plist
[not loaded] com.flipvideo.FlipShare.AutoRun.plist
[not loaded] com.Logitech.Control Center.Daemon.plist
[not loaded] com.maintain.PurgeInactiveMemory.plist
[not loaded] com.maintain.Restart.plist
[not loaded] com.maintain.ShutDown.plist
[loaded] com.maintain.SystemEvents.plist
[loaded] com.micromat.CheckmateAgent.plist
[loaded] com.rosettastone.rosettastonedaemon.plist
[not loaded] com.sony.BloggieSoftware.AutoRun.plist
[loaded] com.wacom.pentablet.plist
[loaded] jp.co.canon.CUPSCMFP.BG.plist
[loaded] jp.co.canon.CUPSFAX.BG.plist
[loaded] jp.co.canon.ScanGearMF.appl.Canon-MF-Scan-Agent.plist
[loaded] jp.co.canon.UFR2.BG.plist
User Launch Agents:
[loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
[loaded] com.adobe.ARM.df0ab5bbe6f698196fcc21e3c1e66dcb758bd911f4d637272d9d8109.plist
[loaded] com.ecamm.printopia.plist
[loaded] com.google.keystone.agent.plist
[not loaded] com.macpaw.CleanMyMac.helperTool.plist
[not loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist
[not loaded] com.macpaw.CleanMyMac.volumeWatcher.plist
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist
[loaded] com.macupdate.desktop5.scanner.plist
[loaded] com.nero.HSMMonitor.plist
[loaded] com.seagate.mediasync.plist
[not loaded] com.smithmicro.cleaning.schedulermailer.plist
[loaded] com.valvesoftware.steamclean.plist
[loaded] com.zeobit.MacKeeper.Helper.plist
[loaded] de.writeitstudios.cookiestumbleragent.plist
User Login Items:
Citations
AirPort Base Station Agent
ChronoSyncBackgrounder
Jawbone Updater
Alfred 2
Fitbit Connect Menubar Helper
TransmitMenu
Dropbox
3rd Party Preference Panes:
PenTablet
BodyMedia SYNC
EarthDesk
F10 Launch Studio
Flash Player
Flip4Mac WMV
GlimmerBlocker
Paragon NTFS for Mac ® OS X
Printopia
TextExpander
Internet Plug-ins:
AdobeAAMDetect.plugin
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
Default Browser.plugin
DYMO NPAPI Addin.plugin
DYMO Safari Addin.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
Flip4Mac WMV Plugin.plugin
GarminGpsControl.plugin
Google Earth Web Plug-in.plugin
iPhotoPhotocast.plugin
JavaAppletPlugin.plugin
LogitechHarmony.plugin
net.juniper.DSSafariExtensions.plugin
OfficeLiveBrowserPlugin.plugin
PDF Browser Plugin.plugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
Silverlight.plugin
WacomNetscape.plugin
WacomTabletPlugin.plugin
User Internet Plug-ins:
Google Earth Web Plug-in.plugin
Bad Fonts:
None
Top Processes by CPU:
11% Google Chrome
10% WindowServer
1% SystemUIServer
1% EtreCheck
1% Carbon Copy Cloner
0% Dropbox
0% Fitbit Connect Menubar Helper
0% Canon FAX BackGrounder
0% Canon CMFP BackGrounder
0% fontd
Top Processes by Memory:
631 MB com.apple.IconServicesAgent
318 MB Google Chrome Helper
301 MB rsync
301 MB Google Chrome
244 MB Dock
244 MB WindowServer
172 MB mds_stores
143 MB softwareupdated
143 MB MacKeeper Helper
115 MB Finder
Virtual Memory Statistics
4.94 GB Free RAM
6.29 GB Active RAM
1.51 GB Inactive RAM
1.24 GB Wired RAM
6.13 GB Page-ins
0 B Page-outsWhen you next have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat, whichever comes first. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
I have a Net Book NB 255-N250. I've had it for a little more than a year now and it has always preformed well. But in the last few months whenever I start a program, Internet explorer for example, The window will pop up and it will say Not Responding at the top. After say fifteen to thirty seconds the program will load and run normally. I defragment my computer about once a month and I have Trend Micro running on my computer which tells me there are no viruses. So what is going on here? Do I need to upgrade my memory or is there something else going on with my computer? My memory is 1G right now, looks like I could upgrade to 2G.
Ok, Computer finally started acting up again last night. I did the troubleshooting and as far as I can tell its Trend Micro that is causing the issue. The service is called Trend Micro Solution Platform. It must have been an update they did that caused the problem because when it was first installed it didn’t affect my computer like that. But just to be sure Trend Micro is actually the problem here I’m going to run the computer for a week with it disabled to see if the Not Responding thing comes up again.
But now I have a new issue. I must have messed this up while I was messing around in the settings- When you hold the Function Key and press F4 for example, a thing is supposed to pop up on the screen and let you put the computer into hibernation mode. Nothing pops up anymore. Some of the functions still work (Mute, Sleep, Brightness adjustment, F10 and F11 whatever they are for) but that pop up wont come on the screen. The rest won’t work at all. How do I fix this? I use F2, F4, and F8 all the time and now they won’t do anything. -
Email scrolling on GoDaddy site causes Firefox to stop responding
I have Windows 7 Premium, desktop (Dell XPS) and Laptop (Gateway) gaming computers. 4Gb memory in each, Firefox 7.0.1
When I try to scroll down thru my emails using GoDaddy's email program my Firefox goes into Not Responding for 20-30 seconds and most of the time will not scroll at all. Hard drive is not flashing, so it is not a memory swapping problem. This happens on both machines and does not happen on any other program. GoDaddy works fine in Win Explorer.
I've removed all but a few add-ons, etc from Firefox. No change.
Anyone... any ideas???'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''''' {web link}
While you are in safe mode;
Press the '''<Alt>''' or '''<F10>''' key to bring up the tool bar.
Followed by;
Windows; '''Tools > Options'''
Linux; '''Edit > Preferences'''
Mac; ''application name'' '''> Preferences'''
Then '''Advanced > General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites and see if there is still a problem. Then restart -
I am using a PC keyboard on my MAC for work purposes. The F9 and F10 key do not respond properly. They just move the program to the foreground. Any ideas how to fix? Thanks!
Maybe this will help
Mac OS X: How to change the behavior of function keys -
I can't log into Tumblr.I'm trying to create a account there.It goes to second stage when asking year and confirmation.After that stage it is not responding further.And I am using win 32 bit with Mozilla 30 version.Please help me some one.bye
Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache
'''[https://support.mozilla.org/en-US/kb/how-clear-firefox-cache?redirectlocale=en-US&redirectslug=clear-cache-delete-temporary-files-fix-issues How to clear the Firefox cache]''' {web link}
and
* Remove Cookies
''This will log you out of all sites you're logged in to. ''
Press the '''<Alt>''' or '''<F10>''' key to bring up the tool bar.
Followed by;
Windows; '''Tools > Options'''
Linux; '''Edit > Preferences'''
Mac; ''application name'' '''> Preferences'''
Then '''Privacy.'''
Under '''History''', select Firefox will '''Use Custom Settings'''.
There is a button on the right side called '''Show Cookies'''.
If there is still a problem,
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''''' {web link}
While you are in safe mode;
Press the '''<Alt>''' or '''<F10>''' key to bring up the tool bar.
Followed by;
Windows; '''Tools > Options'''
Linux; '''Edit > Preferences'''
Mac; ''application name'' '''> Preferences'''
Then '''Advanced > General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites and see if there is still a problem. Then restart. -
Escape key not responding, along with FN keys -Sattelite L300
ok so this has been occuring for a little while, not sure since when, but very recently
basicly, the escape key wont respond to programs, and neither will most of the FN keys, FN F10+F11 work, the LED's light up, but the rest of the FN's do nothing
the escape key responded to a keyboard testing program, it came back as responsive and working, but in programs such as a 3D engine and MSN Messenger, escape refuses to respond and work as it should
it hasnt always been like this, theyve worked before, ive had the laptop since christmas, had to take it back because the wireless card brokeGo to:
http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
and download the TVAP package for Vista (32bit I assume).
Uninstall the current TVAP in Control Panel -> Programs and Features
Reboot and install the new TVAP
ps. You need to burn the Recovery Discs yourself, ensure you use good quality media to avoid problems. -
Front row not responding after few songs
OK.
So here is my problem:
I turn front row on by pressing menu button on apple remote. I go to music, choose playlist (5-stars), shuffle and I do whetever I want, not using my computer, just listening to my music.
After few songs, I here sound but there is no interface in front row.
I see only a bar with song progress, there is no title, album cover... Nothing just this bar with progress.
After pressing menu button on apple remote, nothing happens, it can't shutdown front row, and the computer must be restarded by holding power button. I try Command Q, option comand Esc.... Nothing. I even press F8, F9, F10, to check if the keyboard is responding, that it adjusting keyboard backlit... No light (even it is dark and normaly it automatically turns on.
What can I do? 10.5.2, all updates installed, 2.2 Ghz MacBook Pro (With 4GB RAM), 128MB GRAPHICS.
The same was on 10.5.1, and with 2GB, I don't remember if I have tested it on 10.5.
Does anybody faces the same difficulties, does anybody have a solution? Tiger was so nice...
Help.
ChrisFigured I'd add my voice to the crowd. I am having the exact same problem. I usually use front row to listen to my podcasts, but the screen goes black somewhere between the 1-3 minute mark. It doesn't always do it, but if it does, it'll do it then.
One thing I noticed is that it ALWAYS happens whenever the cover flips from one side of the screen to the other. Is there a way to disable this option? The only way I can fix it right now is if I back out to the previous menu and let the song play over that. It's easy enough to do, but it's can be a bit of an annoyance if you want to adjust the volume or FF/rewind. I keep hoping that the new patches will fix such a glaring flaw, but they never seem to. -
I am running XP. I recently loaded Firefox 4.0 on my system.
There were a lot of problems loading some web sites. Your help system suggested to disable all plugins. I did this and I don't have problems with web sites anymore but I cannot view any videos. I have tried reinstalling Adobe Flash but it just causes Firefox to stop responding.
Ideas?'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''''' {web link}
While you are in safe mode;
Press the '''<Alt>''' or '''<F10>''' key to bring up the tool bar.
Followed by;
Windows; '''Tools > Options'''
Linux; '''Edit > Preferences'''
Mac; ''application name'' '''> Preferences'''
Then '''Advanced > General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites and see if there is still a problem. Then restart -
My MacAir is great except for a problem i have. Keys F1, F2,F5,F6,F7,F8,F9,F10,F11,F12 and the power button are unresponsive. These are keys i frequently use and i have searched the whole apple help centre. Anyone got answers for me? Please helP!!!
Some keys don't work as expected
From the Apple menu, choose System Preferences.
From the View menu, choose Speech.
Click the Text to Speech tab.
If "Speak selected text when the key is pressed" is enabled, the key or key combination set to speak text cannot be used for other purposes or used to type text--click Set Key and change it to a less-commonly used key combination (try to use modifier keys such as Shift, Command, Option, and Control). Or, disable the "Speak selected text when the key is pressed" option.
Click the Universal Access pane in System Preferences, click the Keyboard tab.
Make sure that Slow Keys is turned off. With Slow Keys on, you need to press a key for a longer period of time for it to be recognized.
In the Universal Access pane, click the Mouse tab, and make sure Mouse Keys is turned off. With Mouse Keys enabled, you cannot use the Numeric Keypad to enter numbers--instead the keypad moves the pointer (cursor). (There is an option to enable Mouse Keys with five presses of the Option key; you may want to turn that option off to avoid accidentally enabling it.) If Mouse Keys is enabled and you are using a keyboard with no numeric keypad or Num Lock function, see Unable to type while Mouse Keys is enabled in Mac OS X.
If the function keys on the top row of the keyboard are not working as expected, see Mac OS X: How to change the behavior of function keys.
If the issue persists, use Keyboard Viewer to help isolate the issue:
Click the Language & Text pane (Mac OS X v10.6) or International pane (Mac OS X v10.5.8 or earlier) in System Preferences.
Click the Input Sources tab (or Input Menu tab in Mac OS X 10.5.8 or earlier).
Click the Keyboard & Character Viewer "On" checkbox to select it (click the Keyboard Viewer "On" checkbox in Mac OS X 10.5.8 or earlier).
From the Input (flag) menu, choose Show Keyboard Viewer.
If the keyboard is connected and detected by Mac OS X, the keys you type will highlight in the Keyboard Viewer window. Open TextEdit (or any text application), and try to type something using the keys that were previously not responding to see if they highlight in Keyboard Viewer.
Start from the Mac OS X Install Disc, choose Terminal from the Utilities menu and test the keys which were previously not working. If the keys work while started from the Install disc, then the keyboard itself is working correctly. Use Mac OS X: How to troubleshoot a software issue to isolate the software issue that may be causing the keys to not respond.
http://support.apple.com/kb/TS1381 -
Any time I navigate to one of the Gawker Media sites, Firefox slows down massively. The page loads extremely slowly, and the program freezes up. I often get a (Not Responding) message up at the top of the screen. Other programs on my computer are unaffected. This rarely (only twice in dozens of tries) actually crashed Firefox. It eventually comes back and everything runs fine, on that tab and others, until I try to move to or add another Gawker Media page. Occassionally the Gawker sites don't seem to load properly, but I suspect that may be an unrelated issue, caused by ABP or NoScript blocking ads or pop-ups on individual pages.
-> Tap '''ALT''' key or press '''F10''' to show the Menu Bar
-> Update ALL your Firefox Plug-ins https://www.mozilla.com/en-US/plugincheck/
-> go to Tools Menu -> Clear Recent History -> '''Time range to clear: select "EVERYTHING"''' -> click Details (small arrow) button -> place Checkmarks on '''Cookies, Cache''' -> click '''Clear Now'''
-> go to Tools Menu -> Options -> Advanced -> Network -> Offline Storage (Cache): click '''Clear Now''' button
-> Restart Firefox
If it doesn't work, see this:
Firefox never finishes loading certain websites
https://support.mozilla.com/en-US/kb/Firefox%20never%20finishes%20loading%20certain%20websites
Firefox cannot load websites but other programs can
https://support.mozilla.com/en-US/kb/Firefox%20cannot%20load%20websites%20but%20other%20programs%20can
Check and tell if its working.
Maybe you are looking for
-
How to schedule a job Monday thru Friday only
How can I schedule a job Monday thru Friday only? I tried to use a Factory Calendar but we do not have any M-F calendars setup. If I need to create a new factory calendar, how can I create on without any holidays? Thanks. Ryan
-
Hi. I use one analog output channel and 5 input channels. They all are scanned. When I work only with one output and input chanels (4 channels are not connected), I can see on them the same signal as on working channel. I read the following issues: h
-
Dear All expert I have define FCC parameter for flat file to IDOC scenario but its not working But when we send XML format file it posted successfully so any way to check where we have put wrong value of FCC and why it not working Txt Format - 1
-
Is there a keyboard short cut key to double space my lines like there is in windows?
Can I double space my lines with a short cut? Like in windows when you hit control 2 and it automatically double spaces your lines, or do I have to manually do it at the top? Just curious.
-
Summarizing Data Across Multiple Dates
Here is my issues. I have two dimensions. Date and Time. Date is a standard date dimension. Time is a time dimension who's leaf level is at the second. I need the ability to obtain a value like maximum from my fact table for a given set of prices. I