HP Z840 workstation with 3 HP Z Turbo Drive G2

HI ,i want to build workstation for 4k Grading video and 3d animation  so i choose to go with Z840.what i realy looking for is some info on the HP Z Turbo Drive G2 512gb  and if i can use 3  of themone for the operation system win 8.1and 2 others combine with raid 0  for data  can this combination can work or i can't do it ? thanks.

Hi,
You might get better assistance on the HP Enterprise Business Forum since you have a professional workstation.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Similar Messages

  • HP Z840 workstation - Booting issue

    Hi, My Z840 workstation will not boot if I connect  USB Upstream cable of my monitor "Dell UZ2715H" . Monitor has USB 3.0 port for upstream which is basically for built in speaker, camera and mic. In the bios primary boot is made from HDD, and also try to disable the USB boot, but not luck.Any suggestion - why it is so?  Thanks,APK

     Had the same issue with my z840 after upgrade to Bios 1.55. With 1.53 it works fine. Happend with a USB Keyboard from Logitech (G910). Solved it with changing the Bios to UEFI. After that my Workstation is booting OK. But had to reinstall the OS because of the change from Legacy to UEFI Boot.   Hope that helps.

  • How to connect korg triton workstation with GB?

    I would like to connect my triton workstation with GB using MIDIMAN midi interface but it doesn't work for me. I have iMac with OS X 10.6.8. GB is version 5.1.
    Do I need to do additional setup?

    I downloaded the latest driver and now everything is working fine. Thanks for help!

  • Error installing new 4630 e all in one to windows xp workstation with usb

    error installing new 4630 e all in one to windows xp workstation with usb
    cannot install this hardware error occured during this installation of the device the specified module could not be found
    local printer trying to connect with usb. just purchased the printers.
    Tried:
    loading hp dectect to detect printer, can not detect it
    loaded diagnostic says nothing is wrong
    loaded drivers form hp website
    if i go into device manager the comptuers does see the printer there, with a ! next to it saying drivers are not loaded, but cant get the drivers to load.
    as the instructions say in the book received with the printer. to troubleshoot do this...  which I did, uninstalled rebooted, removed cd and unplug usb, loaded software then pluged in usb and still get same error, cannot install this hardware error occured during this installation of the device the specified module could not be found..
    someone help please

    I also just bought a 4630 and have the same problem (Windows XP) BUT after finally figuring out how to enter numbers on the key pad I was able to get the device to recognize and accept my wireless connection HOWEVER when attempting to print the software claims it could not communicate with the printer BUT the printer worked just fine and I was able to get at least 8 pages of high quality text.
    So, it looks as though HP is SNAFU, the left hand does not know what the right hand is doing.
    I'll keep playing with the software to see if I can clean up this mess.

  • SCCM 2007 query for workstations with client status 1 and o

    Hi everybody,
    I would like to write a sql query which gives me workstations with status 1  if the client is installed and active and 0 if the client is not active.Any help please?
    Thank you.
    Regards,
    Lebalbo

    Here you go.
    Select * from v_r_system R
    where R.client0 =1 and R.active0=0
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • HT1338 why is my MacBook Air running slow and I bought the 11 inch with all memory and turbo boost

    why is my MacBook Air running slow and I bought the 11 inch with all memory and turbo boost

    Please answer as many of the following questions as you can. You may already have answered some of them. In that case, there's no need to repeat the answers.
    Have you restarted your router and your broadband device (if they're separate) since you first noticed the problem? If not, do that now and see whether there's any change.
    If your browser is Safari, then from the Safari menu bar, select
    Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
    and confirm. Any change?
    Quit and relaunch the browser. Any change?
    Log out and log back in. Any change?
    Enable Private Browsing in the Safari menu. Any change?
    Are any other web browsers installed, and are they the same? What about other Internet applications, such as iTunes and the App Store?
    If other browsers and Internet applications are also affected, follow these instructions and test. Any change?
    If only Safari is affected, launch the Activity Monitor application and enter "web" (without the quotes) in the search box. If a process named "Safari Web Content" is shown in red or is using more than about 5% of a CPU, select it and force it to quit by clicking the X or Quit Process button in the toolbar of the window. There may be more than one such process. Any improvement?
    Again, if only Safari is involved, open the iCloud preference pane and uncheck the box marked Safari, if it's checked. Any change?
    Are there any other devices on the same network that can browse the Web, and are they affected?
    If you can test Safari on another network, is it the same there?
    If you connect to your router with Wi-Fi and you can also connect with Ethernet, do that and turn off Wi-Fi. Any difference?

  • I have a "new" CS 6. I had to resinstall mig computer (Dell workstation) with my programs. This time

    I have a "new" CS 6. I had to resinstall mig computer (Dell workstation) with my programs. This time it didn´t  install the Acrobat XI only the reader ...  Why? //2xha

    Q3miki please remove your current installation of Adobe Reader and run the installer for Creative Suite 6 again.  There is an option to install Acrobat Professional 11 from the Creative Suite 6 installation media.

  • Logging on to Win 8.1 workstation with domain credentials

    Hi All.
    I been on Windows 8 Pro(now 8.1 update 1) for over a year now. Until now, I've always logged on to my workstation with my MS account. I recently decided to join my workstation to a domain where the Primary DC is running Server 2008 r2. I joined the domain
    without a hitch, but when I try to log on to the workstation using domain credentials, the logon screen seems to insist on a MS account. It wants user name to be in email form only. When I tried to use my domain credentials in that format ([email protected])
    it told me that the password is wrong and I should make sure to use my MS account password.
    I tried disconnecting my MS account from my local account, but it didn't help.
    Any ideas?

    I'm not sure if what you are doing is supported, to have a local MS sign-in account as well as a corporate domain account residing side by side, you might have to give up your MS sign-in and use a local ID for the domain logon to work
    you may however consider setting this up using the Workplace Join feature in 8.1 which should work much better
    http://blogs.technet.com/b/keithmayer/archive/2013/11/08/why-r2-step-by-step-solve-byod-challenges-with-workplace-join.aspx

  • When I use SGD4.4 on HP 8400 workstation with windows XP? The color is bad.

    When I use SGD4.4 on HP 8400 workstation with windows XP? The color is bad.
    The applications's color is only 8bit.
    The server is windows 2003 R2.
    When I use RDP to connect the windows server, everything is ok.
    Thanks.

    what color depth have you specified in the application attributes? Ideally it should match the color depth specified on the application server.
    Or, you could be running into the known MS issue with color depth and screen resolutions.
    From: http://docs.sun.com/source/820-4905/chapter2.html#Z40002611001810
    Microsoft Windows Server 2003 Applications Limited to 8-Bit Color Depth for Large Screen Resolutions
    Problem: For Microsoft Windows Server 2003 applications, the display color depth on the client device is limited to 8-bit for large screen resolutions. The issue is seen when screen resolutions are higher than 1600 x 1200 pixels.
    Cause: A known issue with Windows Server 2003 terminal services sessions.
    Solution: See Microsoft Hotfix 942610 for details of how to increase the color depth to 16-bit.

  • ZBook 17 g2 - poor DPC Latency performance when running from z Turbo Drive PCIe SSD

    I'm setting up a new zBook 17 g2 and am getting very poor DPC latency performance (> 6000 us) when running from the PCIe SSD. I've re-installed the OS (Win 7 64 bit) on both the PCIe SSD and a SATA HDD and the DPC latency performance is fine when running from the HDD (50 - 100 us) but horrible when running from the PCIe SSD (> 6000 us).  I've updated the BIOS and tried every combination of driver and component enabling/disabling I can think of.  The DPC latency is extremely high from the initial Windows install with no drivers installed.  Adding drivers seems to have no effect on the DPC latency. Before purchasing the laptop I found this review: http://www.notebookcheck.net/Review-HP-ZBook-17-E9X11AA-ABA-Workstation.106222.0.html where the DPC latency measurement (middle of the page) looks OK.  Of course, this is the prior version of the laptop and I believe it does not have the PCIe SSD.  Combining that with the fact that I get fine performance when running from the HDD I am led to believe that the PCIe SSD is the cause of the problem. Has anyone found a solution to this problem?  As it stands right now my zBook is not usable for digital audio work when running from the PCIe SSD.  But it cost me a lot of money so I'd sure like to use it...! Thanks, rgames

    Hi mooktank, No solution yet but, as of about six weeks ago, HP at least acknowledged that it's a problem (finally).  I reproduced it perfectly on another zBook 17 g2 and another PCIe SSD in the same laptop and HP was able to reproduce the problem as well.  So the problem is clearly in the BIOS or with some driver related to the PCIe SSD.  It could also be with the firmware in the drive, itself, but I can't find any other PCIe drives in the 60 mm form factor.  So there's no way to see if a differnt type of drive would fix the problem. My suspicion is that it's related to the PCIe sleep states - those are known to cause exactly these types of problems because the drive takes quick "naps" to save power and there's a delay when it is told to wake back up.  That delay causes a delay in the audio buffer that results in pops/crackles/stutters that would never be noticed doing other tasks like video editing or CAD work .  So it's a problem specific to folks who need low-latency audio performance (very few apps require low latency audio - video editing, for example, uses huge buffers with relatively high latency).  A lot of desktops offer a BIOS option to disable those sleep states but no such option exists in HP's BIOS for that laptop.  In theory you can do it from within Windows but it doesn't have an effect on my system.  That might be one of those options that Windows allows you to change but that actually has no effect. One workaround is to disable CPU throttling.  That makes the CPU run at full speed all the time and, I believe, also disables the PCIe and other sleep states.  When I disable CPU throttling, DPC latency goes back to normal.  However, the CPU is then running full-speed all the time so your battery life basically goes to nothing and the laptop gets *very* hot. Clearly that is not necessary because the laptop runs fine from the SATA SSD.  HP needs to fix the latency problem associated with the PCIe drive. The next logical step is to provide a BIOS update that provides a way to disable the PCIe sleep states without disabling CPU throttling, like on many desktop systems.  The bad news is that HP tech support is not very technical, so it takes forever for them to figure out what I'm talking about.  It took a couple months for them to start using the DPC Latency checker. Hopefully there will be a fix at some point... in the meantime, I hope that HP sends me a check for spending so much time educating their techs on how computers work.  And for countless hours lost re-installing different OSes only to show that the performance is exactly the same as shown in the DPC Latency checker. rgames

  • PC hard drive died and I have replaced it.  Need to import the music on my iPod, but get a message that it's synced with another library (old hard drive).  How do I import the music onto new hard drive? Senuti's just for macs.No old hard drive to copy.

    My PC hard drive died and I have replaced it.  Need to import the music on my classic iPod, but get a message that it's synced with another library (old hard drive).  How do I import the music onto the new hard drive? Senuti (one respondent's suggestion) is just for macs. I have no old hard drive to copy to the new hard drive (another respondent's suggestion.)

    See this older thread from another forum member Zevoneer on different ways to copy music from your iPod back to your PC.
    https://discussions.apple.com/thread/2417169?start=0&tstart=0
    B-rock

  • How do I access my external drive over the web with my iPhone. The drive is attached to my Time Machine.

    How do I access my external drive over the web with my iPhone. The drive is attached to my Time Machine. I am new to Apple and am trying to get all my stuff working together.

    This is not a supported feature of iPhone or Time Capsule.

  • HT3275 Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive.  Could not complete backup to media share.  The network backup disk does not support the required AFP feat

    Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive.  "Could not complete backup to media share.  The network backup disk does not support the required AFP features."  What are AFP features and how do I get Time Machine to backup to my current external backup?

    This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).

  • Windows 8.1 Pro 64 bits. Problem with IDT High Definition Audio Driver on my HP pavilion g6 notebook

    Hi!
    I'd recently upgraded from Windows 7 to Windows 8.1 Pro 64-bit version. All drivers worked fine but I'm having problems with IDT High Definition Audio driver. Can someone help me? Thanks in advance! My PC model is: LS278EA#ABE

    Hi:
    See if this driver works...
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=ob-124012-1&cc=us&dlc=en&lc=en​...

  • Can't back-up new iMac with fusion HD.  The back-up proceeds to within 10% of the total storage needed and then the "of" number increases.  I suspect there is a problem with backing up the fusion drive.  We have a new 3 TB time Capsule.  Any ideas?

    Can't back-up new iMac with fusion HD.  The back-up proceeds to within 10% of the total storage needed and then the "of" number increases.  I suspect there is a problem with backing up the fusion drive.  We have a new 3 TB time Capsule.  I tried excluding different parts of the software from the back-up but it didn't make any difference.  I even tried exluding "invisible items" to no avail.  Any ideas?

    When you setup the wireless and ethernet in the computer.. ipv6 will be on automatic.. this is wrong for the latest TC firmware and airport utility. http://support.apple.com/kb/TS4597
    Go to the wireless and ethernet setup in preferences and change ipv6 to link local.
    Once you do the big backup by ethernet the wireless will function fine for incremental.. it is obviously not estimating the size correctly..
    A full back-up on the iMac would be about 650 GB.  The partial updates that I have been trying start out at 115MB and keep growing indefinitely.  The original back-up never finished nor have any of the follow-up attempts.
    The first estimate should be the full backup but it will keep growing as the backup advances.. I would also delete any inprogress files to make sure it is not messing up .. delete even a sparsebundle if there is one for the imac on the TC and start afresh once you have ethernet connection.
    See A10 here.
    Pondini may have some other clues there to give you an idea of why the backup is slow or not finishing.. there is a lot of issues with TM when it decides not to work.

Maybe you are looking for