HP Zbook dual monitors issue - Intel HD Graphics Family ! in Device Manager

I have upgraded to Windows 10 x64 last week and I was using dual monitors. I discovered one of the monitor has stopped working and when I chekced in the device manager, one of the 2 display adaptors has got an exclaimation mark beside it and says: Windows has stopped this device because it has reported problems. (Code 43) I have tried uninstall and installing it to no avail. Anyone has the same issue? Is this a driver issue?   Thank you.

it's as below: 17th July 2015 10.18.15.4256: 

Similar Messages

  • Odd shadowing effects in XFCE with dual monitors and intel graphics

    Linux fowie-desktop 2.6.34-ARCH #1 SMP PREEMPT Mon Jul 5 21:03:38 UTC 2010 i686 Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz GenuineIntel GNU/Linux
    lspci shows:
    00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
    00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
    00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
    not using an xorg.conf
    rc.conf (snippets)
    LOCALE="en_US.UTF-8"
    HARDWARECLOCK="UTC"
    TIMEZONE="America/Denver"
    KEYMAP="us"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    MOD_AUTOLOAD="yes"
    #MOD_BLACKLIST=() #deprecated
    MODULES=(!usblp vboxdrv !saa7134 saa7134-dvb)
    DAEMONS=(syslog-ng dbus hal @network @netfs @crond @alsa @cups @sensors @samba @ddclient @sshd @httpd @mysqld @smartd)
    and my .xinitrc:
    /usr/bin/xrandr --output VGA1 --left-of DVI1 --output DVI1 --mode 1920x1080
    exec ck-launch-session startxfce4
    Xorg.0.log at http://pastebin.ca/1925313
    If I use the xf86-video-intel driver from extra, the xrandr command to do dual-outputs fails and I get both monitors showing the same desktop (mirrored mode).  I switched to use AUR's xf86-video-intel-git (reading the forums it said this would fix the dual-monitor issue until extra moves to 2.12.0-2) and I do get the dual monitors working propery with the xrandr command, but I'm experiencing wierd effects.  For every unminimized window on the desktop, if I put another window in front, the shadow of the window below stays on top of the window containing the focus.  Hard to explain, so I'll use a photo:
    That's what it looks like with xf89-video-intel-git, libdrm-git, dri-git, and anything else git and intel graphics related I can find.  Any ideas what's wrong, or what I would even call this problem so I can look around and see if anyone else is having the same issues?
    Last edited by fowie (2010-08-25 20:21:53)

    Ok, I went into the XFCE4 setting manager and opened the "Window Manager Tweaks" module, Under "Compositor" if I disable display compositing the shadowing effect is gone, making the display much more usable (thanks!).  But now compositing does not work.  Guess I'll go report this to XFCE, or is the XFCE compositing manager handled by someone else?
    Last edited by fowie (2010-08-25 23:11:54)

  • Server 2012 Dual Monitor Issue - Can't Get it to work properly.

    I have a HP Proliant ML310e that runs Server 2012 R2. It came with an on-board VGA graphics adapter, that was using a Microsoft Basic Display Adapter driver and working fine.
    Needing to run dual monitors, I contacted HP and purchased a Nvida K2000 PCIE graphics card. I installed it using their latest drivers and rebooted, making sure that the new PCIE card was enabled in the BIOS.
    While booting, the server actually now displayed on the new 'second' monitor connected to the newly installed Nvida card. When I actually logged in and went into the display properties, it was only detecting the new display - I couldn't even force detect
    the original display.
    Also, when I go into device Manger, it now only shows the Nvidia graphics adapter - no longer shows that the Microsoft Basic Display Adapter is present.
    Any advice on how to get dual monitors to work on Server 2012. I did try the Windows/P Projector display, but that did nothing.
    Thanks,

    Hi,
    You should check your BIOS settings - some motherboard will disable onboard display card once a PCI(E) card is plugged in. This is a hardware settings issue. If  HP support is available, ask them for detailed configuration steps. 
    If you have any feedback on our support, please send to [email protected]

  • T410 Dual monitor support with integrated graphics

    I am considering purchasing a T410 with integrated graphics, but I need to make sure it will support dual digital displays (with a dock of course).  I use a T500 for work, and when I switch to the integrated chip, I am unable to use dual monitors.
    Can someone confirm that the T410 (integrated graphics) can use dual digital displays with a dock?

    Should work. That NEC is 1920x1080 which is suported on the single-link DVI. DP can handle even more. The dock has both DVI and DP. Your ThinkPad supports the 2 monitor outs. My understanding is the ThinkPad LCD would need to be off when you do this; the specs on the dock mention max 2 monitors simultaneously.

  • Dual monitor issues

    Ok so (again) I'm trying to set up dual monitors.
    My laptop has no backlight so I use a normal CRT as output
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen1" 0 0
    Screen 1 "Screen0" LeftOf "Screen1"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "USB Mouse" "CorePointer"
    #Option "Xinerama" "true"
    #Option "Clone" "off"
    EndSection
    Section "ServerFlags"
    Option "AllowMouseOpenFail" "true"
    Option "AutoAddDevices" "False"
    Option "DontZap" "False"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc:unscaled"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/100dpi"
    FontPath "/usr/share/fonts/PEX"
    FontPath "/usr/share/fonts/cyrillic"
    FontPath "/usr/share/fonts/local"
    FontPath "/usr/share/fonts/Type1"
    FontPath "/usr/share/fonts/ttf/western"
    FontPath "/usr/share/fonts/ttf/decoratives"
    FontPath "/usr/share/fonts/truetype"
    FontPath "/usr/share/fonts/truetype/openoffice"
    FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
    FontPath "/usr/share/fonts/latex-ttf-fonts"
    FontPath "/usr/share/fonts/defoma/CID"
    FontPath "/usr/share/fonts/defoma/TrueType"
    FontPath "/usr/share/fonts/artwiz-fonts"
    EndSection
    Section "Module"
    Load "ddc"
    Load "drm"
    Load "dbe"
    Load "dri"
    Load "extmod"
    Load "glx"
    Load "bitmap"
    Load "freetype"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "keyboard"
    Option "CoreKeyboard"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "us"
    Option "XkbVariant" ""
    EndSection
    Section "InputDevice"
    Identifier "USB Mouse"
    Driver "mouse"
    Option "Device" "/dev/input/mice"
    Option "SendCoreEvents" "true"
    Option "Protocol" "IMPS/2"
    Option "ZAxisMapping" "4 5"
    Option "Buttons" "5"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Monitor"
    Identifier "Monitor1"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    #Option "DPMS" "No"
    #HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
    #VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
    ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
    ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
    ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
    ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
    ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
    ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
    ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
    ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
    ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
    ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
    EndSection
    Section "Device"
    Identifier "Card0"
    Driver "ati"
    VendorName "ATI Technologies Inc"
    BoardName "M56P [Radeon Mobility X1600]"
    BusID "PCI:1:0:0"
    Option "AGPMode" "4"
    Option "ColorTiling" "on"
    Option "AccelMethod" "EXA"
    Option "AGPFastWrite" "yes"
    Option "DRI" "on"
    Option "DDCMode" "True"
    Option "MonitorLayout" "LVDS,CRT"
    EndSection
    Section "Device"
    Identifier "Card1"
    Driver "ati"
    VendorName "ATI Technologies Inc"
    BoardName "M56P [Radeon Mobility X1600]"
    BusID "PCI:1:0:0"
    Option "AGPMode" "4"
    Option "ColorTiling" "on"
    Option "AccelMethod" "EXA"
    Option "AGPFastWrite" "yes"
    Option "DRI" "on"
    Option "DDCMode" "True"
    Option "MonitorLayout" "LVDS,CRT"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "1280x800" "1024x768"
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen1"
    Device "Card1"
    Monitor "Monitor1"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "1280x1024" "1024x768"
    EndSubSection
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    I get that ^^: looks like the VGA screen IS 1280x1024, but for some reason ratpoison thinks it's 1280x800 (all open windows have that size).
    this does not happen in DWM, but should work ok with ratpoison too...so I'm guessing it's a wrong setup on my part.
    Enabling Xinerama in xorg.conf doesn't even start X at all...it segfaults
    What other steps should I take to makea working dual monitor environment? I would like to have 2 X screens btw (my laptop to be screen :1 and CRT screen :0 (the default))

    Scratch that..it was working..but silly me forgot to use ":nextscreen" in Ratpoison..so the windows would open at 1280x800 since the damn thing though I'm still on the first monitor

  • Dual Monitor issue - Open file to 2nd monitor?

    I have a dual monitor setup in Windows 7 and like to work with all the tool panels and PS main window on the left monitor and the photo open full screen on the right. I have tried saving the workspace with the image open full screen on the right monitor, but no matter what I try, everytime I open/re-open a file, it loads on the left monitor behind the tool panels. I then have to press F5 to mnimize some tool panels, then grab and drag the image window to the right screen. Then I have to press the F key to maximize the image window and F5 to restore the tool panels. This is my routine everytime I open a file. There has to be a better way! I have tried things like reseting to the default workspace, moving the PS window and tool panels to the right screen, but it seems the placement of a newly opened document must be hard-coded to open in the main PS window, no matter what the user has setup. 

    Yeah, this is annoying as hell.
    In CS3, if you dragged an image to your second monitor all subsequent images would open up there. I'll leave my snarky, sarcastic comments about the wisdom of this new "feature" for another time. What might end up working you is putting the image on your monitor of choice (along with the app frame and the menu bar) and dragging the tool palettes to the other monitor. That's what I'm doing now and it's taking some getting used to but fortunately, once you drag over the tool box and the layer stack, everything else tool-related seems to open up there OK. The images stay on the other screen (for the most part).
    All things considered, it still sucks... but when you only have one choice, the decision is easy to make.

  • Satellite C660 - Intel HD graphic family - OpenGL 3.1 support

    I'm trying to make my Satellite C660 (PSC1LE) compatible with OpenGL 3.1, but am having trouble downloading the right drivers. The latest update was in 2011.

    The OpenGL is part of the Intel graphic driver which can be downloaded from Intel driver website.
    First of all you have to check what Intel HD graphic card this notebook/CPU supports.
    Then you could download the Intel driver from Intel website (choose zip package)
    After that you have to unzip the package and should install the driver within the device manager. In device manager choose the Advanced installation procedure. This allows you to choose the driver files which are located in the downloaded Intel driver folder.

  • T440s display question / Intel HD Graphics family

    I bought T440s (windows 7 pro) with FHD WWAN screen and I am noticing that my older T430s (windows 8 pro) has a clearer and brighter display. Both have the same Intel controler (Intel Graphics 4400). Screen colors on T440s are warmer (yellowish) than on T430s which has whiter and more appealing/cleaner display/colors.
    T430s explicitely shows Intel(R) HD Graphics 4400 in the device manager while the new T440s shows Intel(R) HD Graphics family only. There is no reference to to 4400 although my order information shows Intel 4400.
    Could someone please clarify how this display difference is possible. Should I check with tech support if I received a less quality hardware on my T440s.
    Many Thanks!

    See this:
    http://www.nvidia.com/content/optimus_technology/optimus_technology_popup.html
    Go into BIOS by pressing F1 at the ThinkPad POST screen > Config > Display. You should see a switchable graphics option here. Make sure it is set to Optimus.
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • Intel HD graphics family deactivated blackscreen

    Hello,
    I deactivated my onboard Intel HD graphic card. and since that i have a blackscreen. and cant do anything.
    Now my question, is it possible to activate my Intel HD card to get my laptop back to work?

    Hi
    Im wondering how you were able to do that
    How did you disable the graphic card?
    Did you test the key combination FN + F5 which switches between the displays (internal and external) ?
    You could also try to boot the Advanced boot menu by pressing F8 at the beginning the booting procedure.
    Now you can choose use the last good working configuration.
    PS: What notebook model do you have and what system do you use?

  • Dual monitor issue with 10.8 and Windows 7 (bootcamp)

    I've a read a lot of threads here about people having nightmare-ish problems after upgrading.  Thankfully, this isn't one of them, just a frustration that I'd like advice on.
    My system:  2010 13" MBP, 2.4GHz Intel Core 2 Duo, 8GB RAM, 320GB HD.  Work setup has external 17" Dell Widescreen monitor connected with VGA to miniDisplay adapter.  Home theater setup has 23" Dell monitor connected with HDMI to miniDisplay cable.
    I upgraded from 10.6.8 to 10.8, as I like to stay up to date and it seemed ML fixed many of the Lion issues.  After finding out Front Row is completely gone I just about reverted (my laptop doubles as my home theater control).  I found XBMC, and it works, sort of (anyone with news on whether Front Row will be returned to us, let me know!).
    Enough babbling, my issue:
    When I switch from bootcamp windows 7 back to OS X, my second monitor's resolution is all screwed up (very low) and the dock and menu bar are BOTH on the second (Dell 17") screen, though it's not in a mirror mode.
    Usually the dock is on the laptop screen, and the menu bar is on the second.
    All I have to do is unplug the miniDisplay port and plug it back in, but is there a setting I'm missing to keep me from having to do this?  Also, I've never used Windows at home, so I've never had to switch with the 23 inch monitor connected.  Don't really want to try as that system is working quite well right now.
    Thanks!
    -Rob

    It's NVidia GeForce 320M.
    Just checked the drivers page and the Mac side only lists up to 10.6.8
    Should I assume that the update needs to be on the Windows 7 side?  At one point last November I tried to update on the Windows side and it caused all sorts of **** on my system causing me to have to reinstall both OS X and 7.
    May be worth another try?
    -Rob

  • Dual monitor issue in CC

    I've finally loaded IDCC on my work machine and started using it (skipped from CS4 to CC). So far, I like it very much.
    I have noticed a minor annoyance though.
    When I have ID open on my left monitor and go to open a new file, it always appears on my right monitor. At first it is centered as if opening within an application frame, but them it flashes and is pushed off the screen further to the right and down so about 1/4 of the document is viewable.
    I can move it to the left monitor without issue (as I said it's a minor annoyance). IDCS4 opens files on the application frame in the left monitor without issue using the same basic settings in the preferences.
    I'm wondering if this is happening to others, or if I have to edit some more settings somewhere?
    Windows 7
    IDCC
         Window Docking disabled
         Open as tabs disabled
         ID Application Frame Maximized to left monitor
    Any thoughts?

    I guess skipping that many versions will cause some inevitable workflow tweaks.

  • How do i fix this dual monitor issue?

    I'm trying to use two monitors in Premiere Pro: my main monitor for  my timeline and editing, and the second for putting bin windows on. The issue is when I simply try to click to  play a clip, full screen playback comes up on both monitors and basically freezes. I have to unplug the second monitor to get the monitor to respond.
    I am up to date, I have tried checking and unchecking the second monitor playback button in Prefrences > Playback menu, I've restarted the program, and tried restarted my computer.
    please help

    this seems to be a new bug, seen a few posts but no solutions. you can try updating video driver.  try changing the renderer to software only, thats in the menu "project settings".  along with the unchecking of the second monitor in playback preferences, make sure the wrench tool icon menu on the program panel has enable transmit unchecked.  do you have any third party plugins or hardware premiere uses? does this happen instantly or just every so often?  computer specs, win/mac, hardware etc.

  • Dual Monitor Issue: 2nd Display too large...can't adjust...web pages provide no scroll bars

    I have two (2) HP S2031 LCD flat screen monitors.  They functioned perfectly with my old 32-bit machine (now gone).  I have just purchased a new 64-bit Windows 7 machine.  There are no error messages, but if I open a web page on the right (2nd) monitor, it does not display correctly.  It's as if it is a little too large.  I've tried adjusting the image using the Nividia software and using the monitor adjustments without improvement.  It is difficult getting out of that window because no scroll bars (vertical or horizontal) present themselves.  I am connecting through an iogear MiniView KVM switch to DVi-D sockets (with the four pins).  
    Is it a 64-bit driver issue?   I think not, because display #1 looks fine.  Could it be an iogear KVM firmware issue?
    I dug out the HP driver disks that came with my monitors and installed them.  After I did that, I realized these were a 32-bit installation.  Now the monitor resolution won't go back to the higher, recommended level.  I don't see the software installation on the "add/remove programs" listing.  I'd like to change that.
    BUT THE REAL ISSUE is that I need BOTH monitors to be able to display proper aspect independently.  Remember, I've been through both the Nividia adjustments menu and the built-in monitor adjustments menu and found nothing that worked so far.
    Please help if you can.  This is for my trading business and I need it desperately.

    When requesting assistance, please provide the brand and model name and/or product number of the computer in question. Without this information, it may be difficult or impossible to resolve your issue.
    Have you swapped the two monitors to see if the problem follows the monitor or remains at the same location??? Try that first... if the problem follows the monitor, perform a hard reset by unpluging the monitor from power then holding the power button for 30 seconds. If the problem stays in the same location, you know both monitors are good and I would suspect the KVM isn't passing the "EDID" data to the computer. Removing the KVM should will tell you if this is the case.
    Please post back with your troubleshooting results.
    Please send KUDOs
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Dock and dual monitors issue

    Most of us have now realized that the dock shows up on both mounitors, for OS Maverick. But have you noticed that sometimes it just takes too long to summon the dock from one or the other monitor? In any case your dock, on your primary or actice monitor shows up quicker, where as the on secondary or non active monitor it takes a few seconds sometimes for it to appear.
    Having spoken with tech support about this issue, I was told that I simply had to wait. Wait for what?! Well according to the tech support your dock is being transfered to the other monitor. Refusing to believe that it takes that long for the dock to be transferred, I started playing around with settings or anything else that I could think of. To no Avail.
    Then Alas, I was working on a project and I could see that my dock was appearing alot quicker and almost on cue everytime no matter what display I was summon it from. But how? When you hover over the 'hot spot' lower part of your desktop, it triggers the summoning of the dock, sometimes it works sometimes it just take longer on the secondary or non active monitor. Here's how I've solved the issue, instead of just hovering over the hotspot, drag your mouse to the bottom of your screen and continue dragging it down. Your dock will appear on demand. (if your monitors are set so that one is physically and configured to be above the other this will not work)
    Thanks and make today a good one!
    DT

    could have something to do with how you are sharing your desktop b/t the laptop and the monitor... try resetting your monitor to "clone" or resetting your home screen to the laptop BEFORE unplugging the external monitor--

  • Dual monitors issues with Built application

    I made a vi that uses both monitors.  I set the run time position to the second monitor on one vi and the first monitor on the other vi.  The vi running on the primary monitor calls the second vi on the second monitor vi the Vi Server.  This works great when working in the development environment.
    But when I build the application, the vi that is supposed to be on the second monitor, shows up over the vi on the primary monitor.
    Did I miss a setting in the Application Settings??
    Kenny
    Kenny

    Hello Kenny,
    might be a bug. but the following code offers more options:
    Ton
    Message Edited by TonP on 09-02-2006 04:35 PM
    Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
    Nederlandse LabVIEW user groep www.lvug.nl
    My LabVIEW Ideas
    LabVIEW, programming like it should be!
    Attachments:
    fillscreen.JPG ‏35 KB

Maybe you are looking for