HP1102W can't print with wireless

Greetings,
I wanted to report a problem i have with my printer (HP1102W).
1. When I first bought the printer. It worked fine and both laptops that I had in my home could easily send files and print,
2.  after a while, one of the laptops began to have problems to send files for it to print, I have checked to see if it was a wireless glitch of the laptop it self or such, but there wasn't.
3.I've also uninstalled and reinstalled it again but nothing changed and the problem still continued on my laptop.
3. I've also used the HP doctor to see if it could detect something but it didn't (it says that everything is OK) and the problem still continues with one of my laptops.
Note: Both of my laptops have 64-bit and windows 7.
I'd be happy if you'd give me a solution or advice on how to solve the problem.

Hi @kiakh ,
I see by your post that you are unable to print over the wireless network with the one computer. I would like to help.
Power cycle the router, turn the computer off and the printer.
Once the router is back up again, start the computer, wait till it fully loads and then turn the printer on again.
Clear the Spool folder and restart the Print Spooler.
How to Clear Current Print Queue In Windows Vista & Windows 7.
Try printing again.
If the issue continues, print a configuration page to get the printer's IPv4 address.
Printing a Configuration Page.
If you have a valid IPv4 address for the printer then try and access the Embedded Web Server for the printer.
Type the IP address into your web browser's address bar. (Internet Explorer)
Did it load the page?
Find out what the computer is showing for the printer's IP by doing the following:
Go to start, devices and printers, right click the printer, go to printer properties, select ports tab, click configure port.
If they don't match then close the configure port window and click create a port and follow the wizard.
Type in the proper IP address.
Make sure the printer is online.
Did they match?
If you created the new IP, test the printer or continue to the next step please.
Check the IPv4 address on the computer.
Go to start, type run in the search box, type in cmd, then type ipconfig.
Check the IPv4 address.
Now check the IPv4 address for the printer.
Do the first 3 sets of numbers match?
Try and ping the printer.
In the same window, type ping printers IP address (space between ping and IP address)
What are the results?
Please provide in detail the results if you are still having issues.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

  • Can not print with HP LaserJet 6L since the upgrade to Mavericks.

    Can not print with HP LaserJet 6L since the upgrade to Mavericks. Any alternative driver for this printer?

    I have an HP LaserJet 5P and had the same problem. My LaserJet is connected to a D-Link ethernet print server, then to an Airport Express to support wireless printing.
    As recommended in earlier posts, I first downloaded the Gutenprint HP drivers at Sourceforge, version 5.2.9 That did not work. Then found the reference to the Apple kb here: http://support.apple.com/kb/dl907
    Downloaded these drivers. When setting up the printer, I got the autoselect option for Generic Postscript Printer and used that. Printer worked, but printed out garbage. I then deleted the printer, and this time selected the HP LaserJet 5P CUPS + Gutenprint v.5.2.9 THAT WORKED! I don't know if was the combination of downloading the drivers from Sourceforge and the Apple kb, or just the Apple kb that solved the problem, but I'm glad this is now sorted.
    I was a bit surprised when I hit this snag to begin with because the last upgrade I did from Lion to Mountain Lion, I did not have this issue. It was seamless.

  • Can not Print with HP LaserJet 5000 and Epson AcuLaser C9100

    I am using MacBook Pro 2.3 GHz Intel Core i7 with Mac OS X (10.6.6)
    I already install the latest print driver from the Apple Software Update website.
    The driver for HP is Ver. 17.5 & for Epson is Ver. 5.2
    I connect two of the printer to my Belkin Surf N300 wireless N Router with ethernet cable.
    The error when print to HP LaserJet 5000 is as follow:-
    Unable to get printer status (Not Implemented)!
    Network host 'x.x.x.x' is busy; will retry in 30 seconds...
    This error can stay forever if I do not delete the print job
    The error when print to Epson AcuLaser C9100 is as follow:-
    Printer not responding
    This error can stay forever if I do not delete the print job
    Previously I can print with my emac with OS X 10.4.10, but now I can not print with 2 of my printer.
    My 2 printer are in good condition, so this is not the printer problem.
    Please, do anyone know how to fix this problem fast, because I need to use this two printer for my business.
    Thanks in advance.

    That is not what Greg needs to know. That is just the way that the IP addresses are assigned to the printers.
    Your problem is probably that the printers were probably originally found by AppleTalk. AppleTalk is not included in Snow Leopard. If the printers support Bonjour, they should be found that way. Otherwise, you have to use other methods.
    How did you add your printers on the new computer? If you delete them from Print & Fax, how would you add them again?

  • How can I print with the black and white cartridge only?

    I am trying to print using the black and white cartridge only because magenta is out of ink but I'm getting the following error message in HP Photosmart C7200 series print dialog:
    The printer is out of ink.
    The following ink cartridges are empty: Magenta. Replace these ink cartridges to resume printing.
    How can I print with the black and white cartridge only?
    Mac OSX 10.7.3
    HP Photosmart C7280 (7200 series)
    This question was solved.
    View Solution.

    I am absolutely disgusted by this; clearly a scam from HP to make more money by selling extra ink cartridges!!  I will make sure to never buy any products from the shoddy rip off merchants at HP ever again!!
    You should be ashamed!!

  • HP D110 AIO printer. Prints jam when printing with wireless, but not when hooked to USB cable! HELP!

    I have a HP D110. It jams the paper when I print with wireless, but not when I use USB cable. Any ideas?

    From what you describe you are having issues printing from MS Office. Have you had trouble printing from other resources on your computer (e.g. from the internet or another program)? The first thing I am going to suggest is that we start by uninstalling and reinstalling the printer from the resources available online. 
    First if you use a USB cord, make sure to remove it (this is important). Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer. 
    In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it. 
    http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3562006&lang=en&cc=us...
    Install that and let me know the result! 
    Have a great day!

  • How can I print with a wider left margin in Preview? (OSX 10.5)

    How can I print with a wider left margin in Preview? (OSX 10.5)
    To punch Binder Holes.
    Should be easy ... Make a Custom page with a wider left margin ... easy to set up, but it does not actually work for any printer I am connected to.
    Info so far:
    Found an older post from 2002 ... "Make a custom page"
    Mac Help has a limited, simple, incomplete answer: "Make a custom page"
    Tried three printers. One Postscript Level 3 One Level 2 and one non postscript
    Switching between page types in the drop down shows a change in the print preview, and the floating information shows the correct page size and larger left margin... but the "Custom Page Size" does not show a larger left margin, in the preview, no mater how it is set.
    There also appear to be a relation ship between the radio Buttons for scale and the margin settings.
    Test prints have simply cut off the left side of the document, and scaled the document from the right side in and the top down.
    Printing a PDF from Preview
    MacBook Pro
    OSX 10.5.6
    Thanks
    Peter

    Thanks ... tried the Paper Handling, but no lock.
    Based on the fact that any scaling, "moves" the image down and to the left on the paper ...
    Th only "work around" solution is to ...
    Rotate the PDF page 180, then scale slightly (90% or so ...)
    This pushes the upside down page, down and to the left.
    While this is the opposite of what is desired, the print is then correct when
    it is punched and placed into a three ring binder.
    Assumption is the application that creates the documnt, needs to have the paper margins set. The reality is, an application like Preview, that does not "create anything", needs to handle existing documents PDF, JPEG and print to Custom Page configurations.
    ie: In Preview, Custom Page does not work correctly,
    Thanks allfor the comments and help ...

  • I am having problem with trying to install the printer with wireless connection​.i have windows 7

    the blue light on top of the printer blinks very fast and intermitenly.  i cannot install the printer with wireless.  I tried with the CD that came with the printer but the green install bar just stops and freezes.  I have a 4 month old Dell laptop.  Printer just purchased from HP is Laser Jet Professional P1102w.

    Are there any third party firewalls installed (e.g. Kaspersky, Norton, BitDefender, etc.)?  It sounds like something is blocking the software and third party firewalls have been known to block communication with the printer.
    How far in the installation process do you get (what options are you able to get to)?
    Is the USB cable connected at the start of the installation?  
    Do you receive any errors at all?  If so, what are they?
    Have you tried using Smart Install?  Smart Install works by connecting the USB cable to the computer.  By default, you should get a prompt to run a file.  Running this file starts the Smart Install process.  
    This video is a good guide to Smart Install.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Running 10.6.8 on mac mini. ethernet port quick. I can not print using wireless

    Can not print using wireless. It printed fine using ethernet
    Running 10.6.8 on mac mini. Ethernet port has quit. (lighting strike I think, it fried two routers, did not get anything else)

    Nothing to go on here.
    Do you have a wifi capable printer? If so, what model? What happens when you try to set it up?

  • I can't print with Photoshop cs6.

    I can't print with Photoshop (CS6). My printer (HP iP6700D) works correct with every program, except Photoshop. When I choose File>Print, there appears only an error-message. And the command-line turns into grey.

    In the meanwhile I detected the problem. I made a new user account in windows and now it works correctly. So it isn't a photoshop problem but probably a register error. I have to find out furtherThanks for your reaction.
    [ excessive quoting removed by admin ]

  • I can't print with symantec endpoint protection

    I can't print with symantec endpoint protection.
    I have to disable the firewall, or reboot my windows 7 computer for the print job to print.  Any ideas what is blocking the printing process and how do I allow so I can print using my HP P2033dn that is connected via ethernet to my time capsule.  Thanks

    In the meanwhile I detected the problem. I made a new user account in windows and now it works correctly. So it isn't a photoshop problem but probably a register error. I have to find out furtherThanks for your reaction.
    [ excessive quoting removed by admin ]

  • Trying to print 4x6 photos.  How can I print with no borders on LR5 with my HP OfficeJet 7410?  Even when in Print mode in LR5, my photos show a border.  Page Setup shows "borderless".  Image Settings show "zoom to fill". But cannot print, nor even previe

    Trying to print 4x6 photos.  How can I print with no borders on LR5 with my HP OfficeJet 7410?  Even when in Print mode in LR5, my photos show a border.  Page Setup shows "borderless".  Image Settings show "zoom to fill". But cannot print, nor even preview, without borders.

    JimHess~  Many thanks.  In my short history with LR, it's amazing how many people I've seen ask this question.  I'm nearly embarrassed at how simple the fix was, but grateful that you didn't dismiss such a basic question.  You made my week.  And my friend's photo album...

  • Can you help with wireless usb printing?

    I have a D-Link router ([DI-824VUP) that works fine as far as geting online and printing to an ethernet printer,(HP1300n) wirelessly. I recently bought this router because it has a usb printer port, yet I can not get it to see the usb printer (Canon S830D). D-Link was no help, as they don't support Apple wireless printing, even though they do support wired printing via their router. QUESTION-any idea how to get powerbook to see the printer when connected to the router? Printer setup utility does not see it, only the HP. Thanks-bobbabe
    OS 10.3.9.
    Titanium Powerbook 667.   Mac OS X (10.3.9)   D-Link router(DI-824VUP)

    Because this forum software is so absolutely USELESS now, you don't get to see the whole of the question in this view. In the other (non-list) view it says:
    "can you help with a technical problem with the stereo imagery option ? it won't take out lead vocal in a stereo mp3"
    And the answer is that if you can't isolate the vocal in the stereo field, or it is one of these odd ones where it's used inverted polarity in different parts of the stereo signal for the same vocal, then you won't be able to. But without a sample, it's impossible to tell. If you can post a link to one, that might help. It has to be external to this site though - Adobe in their infinite wisdom don't allow the posting of audio files on their audio U2U forum. Helpful, that, isn't it?

  • HT4356 Why are Kodak printers not on this list and how can I print with my Kodak printer

    Why can I not able to print with a Kodak printer

    How to Print from Your iPad: Summary of Printer and Printing Options
    http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
    Print from iPad / iPhone without AirPrint
    http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
    How to Enable AirPrint on a Mac and Use Any Printer
    http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
    iPad Power: How to Print
    http://www.macworld.com/article/1160312/ipad_printing.html
    Check out these print apps for the iPad.
    Print Utility for iPad  ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
    Print Agent Pro for iPad ($5.99)  http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8   Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
    FingerPrint turns any printer into an AirPrint printer
    http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
     Cheers, Tom

  • Can't Print Over Wireless Network to HP OfficeJet 6210 connected to XP Comp

    I've been trying in vain for the better part of a week and a half to print from my MacBook Pro (w/ Leopard 10.5.5) over my wireless network (Linksys WRT54G Wireless Router) to an HP OfficeJet 6210 connected to my Dell Desktop running Windows XP SP3. I CAN however, both see and print to the printer with a PC laptop running Windows Vista. I've both re-installed and upgraded the drivers to the Windows XP desktop AND the MacBook Pro for the printer and still can't come to a conclusion. I am able to print to the printer from the MacBook Pro when plugged directly in via USB. I've tried to add the printer via "Windows" tab in printer configuration by choosing the network, then the computer, then entering the administrator accounts user name/password, however I'm still unable to print from the MacBook. Any ideas and suggestions would be greatly appreciated. Thanks!
    Message was edited by: LukeZim

    Hi LukeZim,
    Sorry, but drivers on OS X aren't like on Windows (yet), where a driver is just a component in a system that works for all the comm protocols the computer can do. That's the way it would be if manufacturers provided CUPS drivers (CUPS is the print control system on OSX). But most manufacturers are still providing Carbon drivers - where the comm protocol is limited to what is put into the driver. HP provided a Carbon, USB-only driver for your printer. You'll need to use a third-party CUPS driver to use Windows Printing.
    Gutenprint drivers (included with Leopard) are CUPS drivers, for example.
    http://openprinting.org/showprinter.cgi?recnum=HP-OfficeJet6200
    CUPS drivers:
    http://www.linuxfoundation.org/en/OpenPrinting/macosx

  • Can't print with airport usb connection only

    i have spent the last 3 days searching for help to fix my problem - PLEASE HELP!!!
    using:
    imac osx 10.6.8
    canon image class mf8350cdn
    airport extreme base station
    I cannot seem to print wirelessly with my imac using just the USB connection on the airport router.  I can print with the printer locally when it's "hardwired" directly to a usb on the back of the imac.  I can print if i connect a cat5 network cable from the printer to the airport. i can print wirelessly with a PC when the printer is connected with a usb to the airport.  i just can't do this with my imac via the usb connection on the router.  my error message is a Canon CMFP Printer Driver telling me printer is not responding - check the power.....try sending again.
    I believe i have tried everything!!!  While i am newer to mac and not the greatest at networking, i have manipulated every setting to match up with all of the online help i can get (trying to not have to send this question!!) and no luck.
    i have deleted printers and jobs, reinstalled everything, i changed the cable, downloaded the latest drivers from canon and apple, i updated the firmware on the printer. i even reinstalled my osx and confirmed all is updated on my imac.
    i don't want to scan or fax this way - so that is not my issue -- it's just plain old printing using that usb port.
    i need all of my other ports on the airport for other things, so i cannot sacrific this one for printing - i just want to use the usb as my printer connection to print with all of the machines i have.
    hope my question makes sense and that someone will take the time to give a reply.
    thanks!!
    p.s. the closest discussion that matches my issue seems to be this one:
    https://discussions.apple.com/message/12367897#12367897
    but, i still can't seem to get there..........

    The most comprehensive set of troubleshooting instructions for printing problems involving Airport printers is found at:
    http://docs.info.apple.com/article.html?artnum=107418
    It is possible your printer simply cannot be made to work in this manner, and is more often than not a problem with multifunction printers.

Maybe you are looking for