HP1102w Pro: Wireless/Auto-sleep, auto-off

Hello.
I just bought the HP1102w Pro and I'm using it on MacOS X.9 (Mavericks). I install it using the USB cable and then configured to wireless and now is working wirelessly. Everything great. But I have a couple of doubts:
1. Is there any way to access the printer configuration through wireless? When I went to the printer options in System Preferences/Printers it worked great by opening a different app where I could manage my preferences and print test pages, etc... But when I try the same with the printer in wireless mode, the same app opens but nothing happens, it's a bug or somehting. Is this normal? Since it is wireless, can I access the printer configuration using my browser?
2. I set the sleep mode to "after 1 minute" and disabled the auto-off while USB connected. Does that configuration stays now that I've changed to wireless mode?
Thank you.
Best regards,
Telmo Mendes Leal
P.s.: The Apple Software Update didn't download anything to make the installation possible (like it says on the printer manual). I had to search the Apple support (http://support.apple.com/kb/dl907) and download it manually.

Hello @telmomendesleal,
Welcome to the HP Forums!
I understand you're receiving some issues with your Laserjet P1102W. I will do my best to assist you! For question one, are you referring to changing print settings? Please look at this HP document on Changing Print Settings in Mac OS X. Let me know if this is what you're referring to and you don't have certain options after switching to wireless.
I would make sure your Apple updates are completed on your computer by following this document here. Try repairing the disk permissions on your computer following this Apple document here.
Also, try resetting the printing system on your computer by following this Apple document here. When re-adding the printer, make sure it's not on the AirPrint driver, but the Laserjet P1102W driver.
For the second question, the sleep mode should be still configured even though you switched to wireless. Just make sure the auto-off is still disabled by following this HP document on Auto-Off Delay Time is Too Short. I will be looking forward to hearing from you. Have a great day!
I worked on behalf of HP.

Similar Messages

How to set wireless printer at ad Hoc mode in CP1025nw with auto-off is off?? ie never auto-off!!

How to set wireless printer at ad Hoc mode in CP1025nw with auto-off is off?? ie never auto-off!!
Thank you very much for your help if any!!
This question was solved.
View Solution.

Quite a few questions there, Sends, but I will do what I can to answer them.
I would first recommend buying a router, even if it is one that you won't connect to the internet and network this with your other PCs and the printer. This will give you the best functionality and results for what you are attempting to do.
Additionally, the Auto Off feature of the printer can be disabled, and is not affected by the connection type. You can usually go through the Setup Menu and select Tools to change the options there on the energy saving features.
Lastly, the auto off feature on your computer is a Windows question, but an easy one to answer. If you are on a laptop you can right-click on the battery in the service tray (bottom right hand corner) and change the energy conservation settings.
You might be better off installing the printer through the USB cord and alternating that based on when you are using it, but that would be optimal only if you are printing only a few documents on an irregular basis. A networked connection is the easiest to manage over several computers, honesty, but you do have some requirements for that connection and limitations as well.
I hope this information is useful!

Hp 6500 wireless auto answers with auto answer off

hp 6500 wireless auto answers with auto answer off intermittently using WIN 7

OK, we are going to reserve an IP address for the printer.
We will start with printing the IP and MAC address from the printer. Go to Seutp, Network and then Print Network Config Page.
Now, go into the settings of the router by typing 192.168.1.1 into a browser that is attached to the router. The login is 'admin' and the password is 'password'. Go to LAN Settings on the lower left.
On there we are going to reserve an IP address for the printer at the bottom of the page. Click Add, type in the info you have from the printout (IP address, whatever name you want to give it, MAC address). When you are done, click Apply.
After the router reboots, turn the power of the printer off, then back on. Hopefully the troubles will go away.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP LaserJet M175nw - is "Auto-Off" *actually* compatible with wifi?

So my new printer was advertised as promised that I could "Achieve up to 50% energy savings, using an HP LaserJet with HP Auto-Off Technology which automatically senses your printing activity, turning your printer off when you don’t need it."
This sounds ideal - I print maybe once every 2-3 days at most. The printer could be in sleep mode for most of the time and surely save me loads of energy. Sadly, after a few days my printer stops accepting print jobs. It's still "on" (green power light) and the control panel on the unit can be accessed, however once going into this sleep mode wifi access is lost and nothing I can do will re-instate the wireless connection (i.e. it should show a steady blue light on the front and the IP address in the LCD screen). All I can do is turn the printer off and back on again then everything works as before.
I have:
Set a static IP address on the printer (and reserved this allocation via the router)
Updated to the latest firmware
Confirmed that wireless signal strength is healthy (not too weak, not too near the router)
Now upon reading a few troubleshooting tips (including here on the HP support site stickies) I read the suggestion of "Check that the printer’s “Auto-off” feature is disabled. If this feature is enabled, the printer will power OFF after some period of non-use."
This suggestion seems to indicate that infrequent wireless access and power-saving are mutually exclusive - is this true? Even if the print does indeed "power OFF after some period of non-use", surely waking it from this state (as distinct from completely rebooting the printer) should be sufficient to wake the printer?!
Can anyone confirm just how "supported"/compatible the power-saving and wifi features are on this model? What I'm asking it to do doesn't seem unreasonable - I'd expected some sort of "wake on LAN"-style behaviour...

Hi,
Please follow these given steps
press the tool icon on the display > System setup>Energy settings>Wake/Auto On Events>LAN Job> ON
or
press the tool icon on the display > System setup>Energy settings>Auto Power Down>Wake Event>LAN Job(put a check or select this)
Hope this helps
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

Canon 6D display language resets to chinese after auto off and indicates card full

Just assembled my new 6D with 24-105 mm and display comes in urecognizable language, after changing into english it reminds me that unused new memory card is full, so I reformat and seems ok... BUT when starting after auto off again the same unrecognizable language and full card !
I have taken battery out and put in again, reset to default, changed card, and keeps doing the same.
Any suggestions ?

It could be the GPS in your camera IF you have been secretly kidnapped in your sleep, and placed somewhere in China, inside a cleverly detailed re-creation of your normal surroundings. The persons responsible thought of everything BUT the GPS in your camera sensing your true location and resetting the default menu language to Mandarin.
Investigate this, but very, very carefully.
Scott
Canon 6D, Canon T3i, EF 70-200mm L f/2.8 IS mk2; EF 24-105 f/4 L; EF-S 17-55mm f/2.8 IS; EF 85mm f/1.8; Sigma 35mm f/1.4 "Art"; EF 1.4x extender mk. 3; 3x Phottix Mitros+ speedlites
Why do so many people say "fer-tographer"? Do they take "fertographs"?

MS-6743G (865GM2-LS) System Start & get boot then Auto-off, Unable to find prblm

Hi,
I have problem with my computer to start
MS-6743G (865GM2-LS) System Start & get boot then Auto-off,
every time start, the system boot, after Bios load, then turn-off
If press Del key, enter BIOS setup, also turn-off power
How to solve this problem, what is the problem?
Is't the motherboard problem?
Processor problem?
I can't find it?
Please anyone help me to solve this problem?
Thanks
PC Sekar

Hi
This is the specifications for my System
MSI 865GM2-LS(MS-6743G), Intel P4 2.80E 800MHz 1MB CPU
XP Pro w/SP2 all updates
Kingston KVR266X64C25/256
(512MB-64Mx64 DIMM, PC3200-DDR SDRAM -Exchanged the above one)
SAMSUNG CD-RW Driver SH-R522
Maxtor 120GB (6Y120M0STD) SATA, DiamondMax Plus 9
MITSUMI 1.44 Disk Drive, Model D359M3
HP7540 17" monitor
Please check it & help

My macbook pro won't sleep - if I select sleep it does so initially, then the disc-drive appears to kick in and it comes back to life. It also won't turn off (again, the disc drive kicks in) unless you hold the power-button down for a long period.

My macbook pro won't sleep - if I select sleep it does so initially, then the disc-drive appears to kick in and it comes back to life. It also won't turn off (again, the disc-drive kicks in) unless you hold the power-button down for a long period. Help?

Hi a,
Try an SMC Reset: http://support.apple.com/kb/HT3964

Print jobs stuck in queue after printer goes auto off

Hi all!We have an HP LaserJet M125NW printer in the office, which is connected directly to the network (wired). The problem is, once the printer goes to "auto off" mode, the print jobs get stuck in the queue, and we need to restart the printer every time. After the restart, it works fine, until it goes auto off again. The device has a fix ip, and it can be seen on the network, everything sems okay, but it still doesn't print. I tried different computers, different operating systems, nothing works. Could anyone help me with this annoying situation?

, Welcome to the forums I read about the printing issue you're having with your LaserJet M125NW, that will not seem to wake up when you send the print job to be printed out. Below is what I would first suggest trying. Select Setup, System Setup, Energy Settings, Wake/Auto On Events, and in that menu, select "LAN Job" to see if this will help wake the printer up when you send it a print command. Also ensure you have the power to the unit plugged in directly to a wall outlet. Avoid power bars and surge protectors, which ensures the printer is receiving the full power it needs. Let me know what happens, good luck

Nokia N900 auto off after 15 minutes

Nokia N900 auto off after 15 minutes. I am also reflash my mobile but problem is not solve please help me

More information..
Does it happen when it is plugged into a charger?
What is the battery level?
Are you using the battery that came with the phone?
Are you using a different battery?
Have you "over clocked"?
Does it power off when you are actively using the phone?
Does it power off only when the phone is idle and untouched?
What happens if you run this command in the terminal application?
cat /proc/bootreason

Mac Pro not auto-negotiating link speed correctly

We have found that none of our Mac Pros are auto-negotiating their network link speed correctly while running 10.4.10. This happens while booted into the production OS as well as netbooted to a 10.4.10 NetBoot image. The network card can be forced to negotiate at higher speeds either through the command-line or System Preferences but it will not do it on its own. We have gigabit to every desktop and imaging at the default 10 Mbit is horrible! Any help would be appreciated!

There is a kext that is the culprit:
/System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleIntel82 54XEthernet.kext
In 10.4.9 it's version is 1.1.7a3, in 10.4.10 it is 1.1.8a2, in 10.4.11 it is 1.1.8a6
That doesn't matter much really, but that's the details.
1. Get the 10.4.9 Intel Combo Updater
2. Get OpenUp or Pacifist
3. Open the DMG
4. Show contents on the PKG
5. Copy out the pax.gz file to the desktop
6. un-Gzip the pax, and open that up (with Pacifist or OpenUp)
7. Get the old kext
8. Copy it into your /System/Library/Extentions
Now, the permission on the kext need to be changed to root:wheel or if you in Finder system:wheel
Also, you should either delete the kernel caches or:
sudo touch /System/Library/Extensions
this changes the date stamp on the directory and OS X will recreate the kernel caches...
And yes, the 10.4.11 seed update corrects this.
Also bonus Log files! These have been "prettied up" for readability, but you'll see, 10.4.10's driver is just spitting out Zer0s so the network switch/hub has no choice but to say "O K... I ' l l s p e a k s l o w e r t h e n..."
10.4.9:
Auto-Neg Advertise Reg (04d) = 0xde1,
Link Partner Ability Reg (05d) = 0xc5e1,
Gig Advertise Reg (09d) = 0xe00,
Gig Link Partner Ability Reg (10d) = 0x7800
10.4.10:
Auto-Neg Advertise Reg (04d) = 0xde1,
Link Partner Ability Reg (05d) = 0x0,
Gig Advertise Reg (09d) = 0xe00,
Gig Link Partner Ability Reg (10d) = 0x0
(Much Prettier)
10.4.11(seed):
Auto-Negotiation Advertisement Register (04d) = 0xde1
Auto-Negotiation Link Partner Ability Register (05d) = 0xc5e1
Auto-Negotiation Gigabit Advertisement Register (09d) = 0xe00
Auto-Negotiation Gigabit Link Partner Ability Register (10d) = 0x7800
PHY Specific Status Register (17d) = 0xaf48
If this info from 10.4.11 is NDA well bite me, I think people should know it'll be fixed in the future, right?

My iPhone 4 is going auto off and auto on. Could you please help on this please

my iPhone 4 is going auto off and auto on. Could you please help on this please

iOS 8.1.3 is the latest version. There's nothing to download.

Z220 SCREEN/DISPLAY auto off

Good Day to all, I have already filed a ticket or issue to acer regarding this, but as much as possible I need an easy access response. The issue is about the phone automatically shut down, not the system/phone more like just the screen/display. And using power button to wake it up cannot solve the issue, so what I did was that I removed and re-insert the battery to restart it. However, it took me several times before i was able to make it stop and I could not even make it to home screen to settings. When I was able to make it through the settings, I hastely factory resetted it. But it did not fix the issue since I was able to experience it again and again. Another one, is that it seems the display can't be viewed in every sides or angles coz it seems the color or the screen itself changes like it was struck by sunlight or by a bright light that I could not clearly see the display, in every case or situation, daytime and nighttime. I dont know if this is a hardware error or if this is normal based on the priced that I paid for it. Because I haven't experienced it ever in my years of using and observing my phones and my friend's phone. This Z220, lollipop 5.0, price is just less than the $100 or to be exact, PHP 2990.00 and this made me decide to buy this one, and it's been only a week since I bought it last July 26, 2015. Maybe this is what they say, "you get what you paid for. " I hope I could get a response as soon as possible. And I will be able to pull this one off. Thanks and Godspeed!

Update! Good day to all, One of the support agent called me earlier again regarding my issue and suggested to go back and check for a replacement in the store where I bought this one. And that, I was able to received a new one and to see if it has the same issue regarding the view angle, and to my expectations, it still has the same view angle issue because of the material used for this cheap Z220. Which is TFT capacitive touch, a display specs or hardware part. Though it was not indicated that it is a TFT but based on what I have read about different kinds/types of display, it is more likely a TFT display issue, wherein it has a view angle issue or limited view angle but a cheap one that is widely use for budget phones. Regarding the first issue, I do hope with this new replacement, I will not be able to experience it again. Since this could not be fix by some techies for now. And I hope I will be able to continue using this for years to come as I'm the type of person who values everything even if it is a cheap one. Hence, the auto off of the screen/display is still unsolved but I think I could not expect more response regarding this. Thanks IronFly for the response. Godbless to all.

Auto off and on

Am experiencing auto off and on on my BB curve 9360 whenever am listening to music or chatting with the phone. Anyone with useful solution should pls come to my aid, need it done asap. Thanks

Hello
Welcome to the Community
May we know your device OS version and if you recently upgraded your device OS?
Thanks,
Ron
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

HT201415 Auto off cellular in i phone 4s

Auto off cellular in i phone 4s

Hi Ahmed 100,
This article may be able to help:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Cheers!
- Ari

"Activate the Hardware Auto Off Feature" is not present

I have an hp photosmart 3210 and I am using win xp. I just reinstalled the latest printer software from the hp download center after a clean reinstall of windows after hard drive failure. The printer turns off after 30 min and network printing will not work unless I wake it with the power button. The "Activate the Hardware Auto Off Feature" in device settings is not present to turn this off. Any ideas?

Did you look on the front panel of the printer for the Auto Off feature?
What router brand/model?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP1102w Pro: Wireless/Auto-sleep, auto-off

Similar Messages

Maybe you are looking for