Hp1200 v printing a page of PJL commands before the doucment is printed.

Good afternoon,
Firstly the details.
Printer make \ model : Hp laserjet 1200 v
Printer Driver : Hp Laserjet 1200 series PCL5e
Platform : Windows 2003 (sbs) SP2
Between printer and network there is a Castelle print server.
Problem:
When i send a document to the printer from word, excel or outlook firstly i get with the following text.
@PJL COMMENT "context data is not available"
@PJL SET RET=ON@PJL SET DUPLEX=OFF
@PJL SET ECONOMODE=OFF
@PJL SET OUTBIN=UPPER
@PJL SET FINISH=NONE
@PJL SET PAGEPROTECT=AUTO
@PJL SET PAPER=A4
@PJL SET TRAY1TEMP=NORMAL
@PJL SET HOLD=OFF
@PJL SET RESOLUTION=600
@PJL ENTER LANGUAGE=PCL
Then after the printer prints the document with no problems. however it is a bit of a waste of paper if for every print job that we do an extra page comes out with the PJL commands.
So far i have tried differen drivers for the printer.
Removed and recreated the printer on the server.
Changed the printer for another printer of the same make and model.
Tried disabling the advanced printing features on the printer.
banged head against table in frustration!
does anyone have an idea of how i can remove \ disable the PJL commands that are being sent with the actual document.
Hope thats clear peeps.
Many thanks in advance.
Regards
=Sonic=
Message Edited by =sonic= on 05-01-2009 07:12 AM

Had the same problem with my printer hooked up to a printer server. I had to disconect the printer server and reinstall the printer drivers connecting directly to the computer via usb.

Similar Messages

I can't print multiple pages from a website using the site's print button or 'file - print' and if I try to save as a PDF, it still only saves the first page and then cuts off.

I'm using Mac OS X 10.5.8 and Firefox version 3.6.8. When I'm on a website and try to print the info on the site, whether I use the site's own 'print' option, or I go to the Firefox toolbar and try to use 'File->Print', only 1 page prints out - it just cuts off mid-page. If I try to save as a PDF instead, the same thing happens in exactly the same spot - it saves as a 1-page PDF and cuts off in the middle of the page. I've already tried all of the suggestions here https://support.mozilla.com/en-US/kb/Printing+a+web+page?s=printing&as=s and the suggestions here http://kb.mozillazine.org/Problems_printing_web_pages and nothing has worked.
I appreciate any help!!

I have the same problem... not being able to print website 'Print' pages. I have read carefully the above link and have followed the reset directions in about:config, but I still cannot print in Firefox. Both Google Chrome and IE work perfectly every time. I have verified that the correct printer is selected and that the margins are in order (0.5 all around happen to be what mine are set for). I have resorted to use the Firefox Add On "View this Page in IE" whenever I need to print something. Works like a charm, but come on... it should work in Firefox too! I know there is some setting or something, but the Problems_printing_web_pages link had nothing there that worked for me.

How can i print specific pages against searched word or name (in one print command) from 1000 pages

how can i print specific pages against searched word or name (in one print command) from 1000 pages

Thanks, Alex!
ok, I try first approach in print4.vi, but Labview return an error (view jpg); if I cut From, To controls, the VI print all pages. The same things happen also if I trasform I32 in Variant.
I don't try second approach, because at this time I have only one report
I try also with VB macro: this is better (print3.vi) but.....if I use:
Sub Print_Pages_From_To()
ActiveDocument.ActiveWindow.PrintOut Range:=wdPrintFromTo, From:="2", To:="3"
End Sub
is ok; print the pages selected; if I use:
Sub PrintPages()
ActiveDocument.ActiveWindow.PrintOut Pages:="2-3"
End Sub
printer print all pages.
what do you think?
regards,
Italo
Attachments:
print Problem.jpg ‏39 KB
print4.vi ‏19 KB
print3.vi ‏19 KB

How to print different pages of sap script from diff. trays of printer

Hi All,
I have the requirement in SAP script. How to print different pages from different trays in the printer.
For example page 1 logo and address has to print from tray-1,
page 2 main data print from tray-2,
page 3 footer data print from tray-3.
will appreciate if u come up with solutions asap.
Thanks in advance.

Hi,
May be the links given below might help you,
SAPScript:Selecting Different Tray in SAPscript
Print to different output tray in SAPscript/Print Workbench
Regards,
Hema.
Reward points if it is useful.

How do I print just one page of a .pdf using the android e-Print app?

How do I print just one page of a .pdf using the android e-Print app?

Hello,
I see that you're having an issue with printing just one page from the E-print app.
Unfortunately, on an android device, you do not have the feature to select how many pages you want to print
Thanks!

When attempting to print in Pages, I keep getting a message that no printer is detected. I have checked all connections and they are solid, this printer has always worked before, and even if I try to add it, I still get that message.

When attempting to print in Pages, I keep getting a message that no printer is detected. I have checked all connections and they are solid, this printer has always worked before, and even if I try to add it, I still get that message. I can print from all other applications, just not any Pages documents.

You may just have an outdated printer driver.
Menu > Edit > Print > Printer: Add Printer
Peter

TS4006 is there a way to undo the "Erase" command before the deletion starts?

is there a way to undo the "Erase" command before the deletion starts while the phone is turned off. In my case the erase is pending the phone being turned on. Now that I have found the phone, I don't want the deletion to happen. How can I undo the command before turning on the iPhone?

There's no way to block the remote wipe. But once it's been wiped, you can perform a restore from your backup on either icloud or itunes.

Printing LAST page in SAP script on the back side.

Hi ,
I have a problem with the printing of the LAST page on the reverse side of the form, when done with a vendor.
At a time we print many vendors together.
So, when done with printing of a vendor it needs to print his address on last page, reverse side(address)
Next will be followed by another vendor details.
I cannot give 'D' for the first page because it would fail if the form flows more than 2 pages.
is there any way of triggering the LAST page in SAP Script when it done with printing of one vendor.
any help would be highly appreciated.
regards.

Hi ,
In Script PO i have to print 'Terms and Conditions' text only on the back side of last page of the PO.
Presently script contains THREE pages ( FIRST, NEXT, TERMS).
FIRST with attributes :
next page as NEXT , Print mode T.
NEXT with attributes :
next page as NEXT and print mode T
TERMS with attributes :
next page as ' '.
I Created 'TERMS AND CONDITION' window.For TERMS page i selected 'TERMS AND CONDITION' window only.
So page window of 'TERMS' is 'TERMS AND CONDITION' and i included standard text in 'TERMS AND CONDITION' window.
If PO contains 9 pages( that means MAIN WINDOW data flows up to 9th page with footer also ).
So i have to print standard text(Terms and conditions) back side of 9th page only not on all pages.
So total PO contians 9 pages with 10 prints.
Please help to solve the issue
Thanks and Regards
Venkata swamy

All of a sudden I have problems printing web pages wwith Firefox 3.6.8 (XP), but printing pdf pages is still fine (printing with other software as well)

Suddenly I can't print web pages with Firefox 3.6.8 anymore, but pdf pages pose no problem - the same applies to printing with any other software

Thanks edmeister for your trouble!
I guess I should have written that I had tried the tips on 'reset printer' and 'does not print to paper at all' before I posted the question - to no avail.
The printer starts as normal: it's the right printer selected, the dialogue window shows the progress of sending the data to the printer - and after that: that's it. It simply vanishes from the queue, and nothing happens.

G5 prints 5 pages of everything...no matter what printer I use. HELP!

My G5 has been printing perfectly (wirelessly) to two printers for about two years...an OfficeJet 6500, and a HP Laserjet 2015. Now, today, no matter which printer I send a document to (and specify "1" as the number of pages to print), the printers EACH print 5 copies. If it's a multi-page document, they print 5 pages of every document.
This does not happen when I print from other computers, so I know that it is a situation with the G5.
ANY help would be appreciated!!!

Try Reset Printing System:
http://support.apple.com/kb/HT1341?viewlocale=en_US

Browser pages open way off in the distance,"small print".How do i fix this?

Every Web Page I go to opens up very small. For every page I have to zoom the page many times just to read it. Is there anyway to set the page zoom to stay on that setting for every page?

Default FullZoom Level extension:
https://addons.mozilla.org/en-US/firefox/addon/6965

9i:Can Page number be obtained before the entire generation of report ?

Dear all:
Suppose there is a report, the report is printed on both side of paper
The page no of report (current logical page no and total logical page no) reset at each customer,
For each customer,
i want to print a logo on the front side of the last page (The logo would be read by machine so that it must be printed on the front side of the last page)
In 6i, As page no/total page no cannot be known in function/triggers until entire report generated.
so I have to generate the report twice
First) I have to get the total no of paper for the report of each customer
Second) Actually generate the report
so that i know which page the logo should be printed
(In the format trigger, when the front side of last page reached, return true in "format trigger of the logo" to print the logo)
However, the method is not effective.
Heard from others, 9i can solve the problem because in function/trigger, before the entire generation of report,
the total logical no of page and current page can already be known. (so that the generation
can be done at one time..no need to do twice)
any suggestion ?
Thanks for you help

Hi,
So I cannot test from the report builder, I guess?Pl take a look here:
http://download.oracle.com/docs/html/B10314_01/pbr_cla.htm#640470
This gives you a list of commands that you can use the keyword with. It says No for rwbuilder. So it may not be possible to test it with Builder.
Reading the other threads, this seems to be a very complicated thing to do, creating EAR, etc, and I seem to need 9iDS, not AS (I have AS)?One of the main reasons a JSP report is useful is - you can deploy it with your J2EE application, ie, you place the report JSP alongwith other JSP's of your application, and deploy the J2EE application (EAR). So thats why you see so many references to EAR's, packaging etc in the other thread that discuss JSP's.
Th answer to your Q is - no, you don't need iDS for deploying and running the JSP. You can run it from your iAS installation (thats what the iAS suite is for - deploying and running your reports that you developed using iDS). What you need to do is this:
Copy your JSP to
ORACLE_HOME\j2ee\OC4J_BI_Forms\applications\reports\web
Go to the Enterprise Manager, and make sure that the OC4J instance (OC4J_BI_Forms) is running. Now access your JSP with the following URL:
http://machine:port/reports/<Report_Name>.jsp?server=<server_name>+userid=<db_conn_string>
For complete information about deploying and running JSP's in iAS, refer to
http://download.oracle.com/docs/html/B10314_01/pbr_run.htm#1011901
Navneet.

Home page won't load on start up it goes to the last page it was on before the shut down.

It started just recently where I exit FIrefox and then restart it either after the computer has rebooted or closed by accident, it always brings back the tabs and pages I was on at the time of shut down. I have looked on here and tried what others have been told and nothing worked. I would like to not have to uninstall firefox but I will if I have too. Any help would be greatly appreciated.

You can check if you have an user.js file in the Firefox profile folder that sets the browser.sessionstore.resume_session_once pref to true.
*http://kb.mozillazine.org/browser.sessionstore.resume_session_once
*http://kb.mozillazine.org/user.js_file
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
The user.js file is only present if you or other software has created it, so normally it wouldn't be there.
You may want to check its content with a plain text editor if you didn't create this file yourself.
The user.js file is read each time you start Firefox and initializes preferences to the value specified in this file, so involved preferences can only be changed temporarily for the current session.

How do I make Google my start page like I had before the update

before the latest update my start page automatically was the Google page which I really liked. Now Firefox 3.6 page comes up which I don't like. How do I go back to the original format? Thanks - Hans

See this article for some suggestions: [[Firefox has just updated tab shows each time you start Firefox]]
See also http://kb.mozillazine.org/Preferences_not_saved and [[Preferences are not saved]]
* [[How to set the home page]] - Firefox supports multiple home pages separated by '|' symbols

How to print multiple pages in OAF without opening the doc

Hi,
I have a search page, where i get multiple rows in the result page. In the result page i have a column with the docs attached(PDF format). I also have the option of selecting the multiple rows with a single click.
My question is say if i get 10 rows in result page with the PDF pages attached. I would like to print the 10 pdf's without opening them in a single go.
Any help/suggestions appreciated.
Regards
mac

Hi,
I have a search page, where i get multiple rows in the result page. In the result page i have a column with the docs attached(PDF format). I also have the option of selecting the multiple rows with a single click.
My question is say if i get 10 rows in result page with the PDF pages attached. I would like to print the 10 pdf's without opening them in a single go.
Any help/suggestions appreciated.
Regards
mac

Hp1200 v printing a page of PJL commands before the doucment is printed.

Similar Messages

Maybe you are looking for