HP1510 All in one - Driver installation fails

I am trying to install HP1510 all in one onto a new windows 7 machine. Using the HP provided software the installaion fails and it seems that the computer cannot detect the printer (although the machine does detect the printer and yellow triangle is seen on hp1510 in the device manager).
I tried the HP Printer install wizard which recognizes my printer and the USB connection and after diagnosis, says that all relevant software are installed but basic driver is either not installed or configured properly and wants me to manually update the driver.
If I try to manually update the driver, I see driver is installed and on trying to use it get the "Unable to find core drive package that is required by this driver package".
HP Print andScan doctor doesn't recognze the printer at all.
PS: I have used the latest driver software downloaded from HP website and connected the printer only when requested. This printer corects works with my other PC so I feel that harware is OK and it is a system issue. I have also run windows update to make sure my PC is updated.

Hello blueintrigue,
Thank you for visiting the HP Support Forums! I see you are running into some problems trying to install the software and drivers for your HP 1510.
To better help you can you please let me know the following:
1. What is the Exact model of HP Printer you are using?
I would like to try a different uninstall approach, I will watch for you reply so we can begin troubleshooting.
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Similar Messages

All-in-one driver installation fails under Windows 7

I am trying to install the all-in-one printer driver for Windows 7, 64-bit, Service Pack 1. I have downloaded the installer from HP (AIO_CDB_Net_Full_Win_WW_130_141.exe), downloaded it using HP Print and Scan Doctor 4.3 and using the HP Printer Install Wizard (hppiw.exe). All methods fail. My computer is a new Dell Inspiron (Intel i5-4440 @ 3.1GHz, 8GB RAM, 64-bit OS). The printer I am installing for is a HP 6310, which is old but which has worked well for years under Windows XP. I don't think the printer is an issue since the installer never reaches the point of scanning for hardware.
Symptoms:
Installing using the downloaded installer, the initial splash screen displays. Selecting "Install" displays a second screen with several progress indicators beginning with "Checking system...". After checking for a few seconds, an error box pops up complaining that it can't find a file named "hpzpnp.ice_suffix..exe".
There are two files in the Setup directory named "hpzpnp01.exe" and "hpzpnp04.exe". The Autorun file contains many references to an %ICE_SUFFIX% environment variable.
I guessed that the installer executables did not have enough privelege to set environment variables, so I went through the installer directories and set all the executables to run with administrator privelege.
After that, running "Setup.exe" from the top of the install tree, the initial splash appears, followed by the second "checking system..." progress display. Then a new window with advice about keeping firewalls turned on, etc. pops up. Continuing from that point pops up a new error box saying:
"The specified path is too long C:\Program Files (sLar dig mer med hjalp av en demo pa skarmenHitta enkelt dina foton med onskad metod-Datum, Markning, Mappar, Sok, Favoriter)\HP\."
I have done this multiple times, and the parenthesized phrase (Swedish?) is sometimes different, but always wrong. It looks to me as though the installer is trying to decide whether to install 32- or 64-bit drivers, but can't decide which. It fails to initialize a string variable and concatenates garbage onto the "C:\Program Files" path string.
I have also seen an error box with the following error near this point:
"C:\Users\Sid\AppData\Local\7zS4689\Setup\hpzrein01.exe" "-wStub" "3...
"The parameter is incorrect."
Clicking OK on the error box aborts the installation.
Installing using the HP Printer Installation Wizard produces the same error message as the initial attempt with the downloaded installer about missing files with names containing "ice_suffix".
Installing using the HP Print and Scan Doctor progresses as far as the "path is too long" message.
I've done this now many times, trying different things, without success. After each attempt, I run the Uninstall_L4 utility in utils\ccc under the installer tree, then run the OS Disk Cleanup utility. Following an earlier post, I installed the latest version of Flash Player, with no change in symptoms.
Any fresh ideas would be much appreciated.

Hi ehildum,
Thank you for the time and effort you put into your post. I can see you have done plenty of troubleshooting on your own, but I do have an idea.
If the USB cable is plugged in this could be causing issue. Assuming it is connected, let's unplug and take a look at the Device manager. The hpzpnp.ice_suffix indicates a plug and play 'pnp'.
Follow these steps and let me know what happens.
Click on Start
Right click on Computer
Select Manage
On the left panel, click on Device Manager
Click on View at the top and select Show hidden devices
Look in the list for Other devices
If you see the printer here, right click and select uninstall
Look in the list and click on the arrow next to Printers
If you see the printer here, right click and select uninstall
Delete all files in the %temp% folder
Restart the computer
Open the installer from your download (AIO_CDB_Net_Full_Win_WW_130_141.exe)
Do Not plug the USB cable in until the software says so.
Please let me know the outcome of these efforts. If your USB cable was not connected please complete the above steps anyway to see if there is something stuck in the Device manager that could be causing the conflict.
I look forward to hearing from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP Officejet 7310xi All-in-one driver always fail to complete the download on brand new computer

I just go my computer a few weeks ago. It has windows 7. I have added very little to it yet. I have tried on numerous occasions to download the drivers for our printer. I did attempt to use the cd that came with it, but that was for earlier operating systems. What can I do to get this to download? I really need my printer.
This question was solved.
View Solution.

HI,
You should use the Print Install Wizard from method one in this document. It should walk you through the install
Print Install Wizard
Click the + to expand the section in method one and follow the instructions in the Print Install Wizard.
Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
I am employed by HP

Multiple USB Device Driver Installations Failing

Windows 7 64 Bit / MSI P965 Platinum Mother Board
I have three USB driver installations failing. I believe this is related to ' USB', because installations of other software unrelated to USB devices install just fine. Might it be a Windows Installer Service, appears to be running fine?
Failing Device Driver Installations;
1) IOGEAR USB 3 PCIe card
Problem: The installer runs part way through the "Preparing to install' process and goes into limbo. I have tried three USB cards by different manufacturers and get the same problem. Tried several Renesas installers, all failed.
Microsoft Windows Installer says: 'Stopped working. Files that help describe the problem: AppCompat.txt, WERInternalMetadata.xml, WERDataCollection failure'.
2) APC Battery Backup 'PowerChute' Software
Problem: : The installer runs part way through the "Preparing to install' process and goes into limbo -or- I get an error message telling me to check the USB connection. APC cable is pulgged into a native port, not a hub. APC has no solution.
3) Logitech Harmony One Remote Software (Finally installed in 'Safe' Mode
Error: : The installer runs part way through the "Preparing to install' process and goes into limbo, but, when I went into 'Safe Mode' the software installed properly. Installation of the other two examples yield the Windows 'can't be installed in safe mode'
Help Appreciated - IM

To rule out a Windows problem, have you tested with a fresh parallel installation?

SoundBlaster X-Fi Driver Installation Fails After Moving Soundcard to New Slot

NSoundBlaster X-Fi Driver Installation Fails After Moving Soundcard to New Slot4 I recently moved my X-Fi Elite Pro soundcard to a different PCI slot to accommodate my new large PCIE graphics card.
Prior to moving the card, my?original SoundBlaster install went fine without any trouble. When I booted up after relocating the card,?it was not detected at all. So I uninstalled my SoundBlaster driver software and?rebooted the computer?thinking that was necessary to clear any hardware configuration settings from the old install. This made no difference. I then discovered my card was not seated properly and corrected it.
Next I installed the SoundBlaster driver software. The installation proceeded and finished with a request to restart the computer. Once I did, the computer detects my card and starts the hardware installation wizard asking if I want Windows to search online for driver software. It does not recognize the just installed SoundBlaster driver installation. I have a dual boot setup and this happens in both WinXP Pro and Vista 32 Home Premium.
What's wrong here?

Forget it folks...couldn't wait for any suggestions so I just cleaned off my hard dri've and reinstalled everything. Works fine.

How do I keep my HP1510 All-in-one from printing so many test pages?

How do I keep my HP1510 All-in-one from printing so many test pages? My printer is connected to my laptop, and it seems that every time I disconnect, the printer wants to print an test page when I reboot. I don't know where the option is to turn this off.
This question was solved.
View Solution.

The pages are likely alignment pages. When a new cartrdige is installed the printer will print an alignment page that must be placed on the scanner glass and the Scan button pressed to complete the alignment process. If the alignment is not completed it will repeat when the printer is turned on or perhaps at the end of print jobs.
The alignment page will stop printing when the alignment process has completed. See the page here for information.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Computer dies when connecting Double Dragon All-in-One Driver

I connected a DVD drive with the Double Dragon All in One Driver, via it's USB cable, to my Toshiba Satellite T115 S1100. I have done this numerous times before and there has been no problem. On this occasion I moved the power cable from the DVD to the power socket on the unit and as I inserted it the computer hard drive clicked and the computer went dead. It is now as dead as 'a dodo' and I assuming that there has been a power surge through the USB cable. Does anyone have any thoughts or have I 'toasted' the motherboard or some other part of the computer? Many thanks Peter
Solved!
Go to Solution.

I contacted Toshiba, who were very helpful but were unable to suggest a solution, without seeing the machine.
However, I took the battery out, whilst I was working on another laptop. When I returned and placed the battery back in, lo and behold, it came on and seems to be unaffected by whatever happened. So many thanks to anyone who may have viewed this blog, but the issue is solved. Peter

Download deskjet f380 all in one driver and printer

windows 7 64 installed on my computer sucessfully.
i was downloading hp deskjet f380 all in one driver and software off HP website and
lost electricity to computer before completed. Then computer tried to recover
cleanupprogress rollback and was removing unnecessary components and the computer
appeared to be working but stuck at 45% progress for 2 hrs. obviously something is wrong.
any ideas what to do?

Hello there Beezntrees,
We have a great many bundles that offer our customers some savings when in need of purchasing multiple devices. With so many options to choose from, our sales associates should be able to direct you in the right direction to get you set up with devices that meet your needs. It is discouraging to hear that it took a few visits to the store with a couple exchanges to get you to where you should have been left after one.
I am glad to hear that you were able to speak with a manager at the store, and that she offered you a resolution to this experience. I have some further information for you, which I would like to provide to you in a private message. You can check your private messages after you have signed into the forum by clicking the envelope icon in the top right corner of the page.
Sincerely,
Tasha|Social Media Specialist | Best Buy® Corporate
Private Message

HP PhotoSmart 2575 All-In-One Driver/Software Install Issue - Windows 8.1

Hi
I've just bought a new Sony Viao with Windows 8.1 (64 bit) installed.
I'm trying to install my HP PhotoSmart 2575 All-In-One so downloaded the driver and software installer from here:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-110159-1&cc=uk&dlc=en&lc=en...
The file downloaded fine on to my desktop, i double click it and then the Exctracting... thing moves along to 100% then goes off the screen. Then nothing happens. I was expecting some software for the printing and scanning to be installed or some further install files to be added to my desktop.
What do i do next?
Matt

Hi Matt,
Thank you for updating me. I can definitely understand the frustration you must be feeling, especially when things seemed to be going great then it changed.
I have 2 documents to follow next. First, please try the steps in the document titled "Software Installation Stops Without Warning and With No Error Message". When you get to "Step three: Install the Software", it references HP SmartInstall. Please don't worry about using that program as it's specific to some of HP's LaserJet printers. Please use the HP's Printer Install Wizard instead of HP's SmartInstall.
If that document doesn't resolve the issue then please proceed onto the 2nd document titled "The Progress Bar on the Software Installation Stops or Stalls".
Please let me know how it goes. I want to ensure we have your printer installed and working.
Software Installation Stops Without Warning and With No Error Message
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02018709
The Progress Bar on the Software Installation Stops or Stalls
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00836418
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Hp psc 1350 all-in-one driver download issues

Hello
I have a Toshiba laptop and an hp psc 1350 all-in-one printer. Both were working well until Sunday. Now the printer will not work.
The on light of the printer is constantly on when attached to power, I can press the on button so it doesn't appear to be broken, but the light will not turn off.
When I remove the power cord the lights cycle through the printer panel (and the on button light does go off momentarily) then the on light stays on and will not turn off.
I have been unable to download the latest driver update from Windows Update or any websites automatically or manually - TOSHIBA USB DVB-T/Analog Hybrid Tuner (391 KB). The download always fails. I also tried the FixIt facility from Microsoft, but it tells me there are no issues.
Does this mean the driver is the issue, or do I have to purchase a new printer?
Thanks for your help.
This question was solved.
View Solution.

Hi Gerri_31,
I understand you aren't able to shut down the printer with the power button.
Thank you for your reply.
I will be happy to help you with this.
I would do a power reset to see if that will resolve the issue. With the printer still turned on, disconnect the power cable from the back of the printer, hold the power button for 10 seconds to drain any power, if the printer has external power module with a detachable power cord disconnect it for 15 seconds and then reconnect it. Then disconnect the power cable from the wall outlet. Wait 10 seconds and reconnect the power cable back to the wall outlet first, then the back of the printer and power it on again.
Make sure the printer is connected directly to wall outlet. (don't use a power hub or a surge protector)
I have provided a document for power issues.
The HP Printer Won't Turn On or Respond.
If these steps don't resolve the issue I would recommend to call HP Tech Support for
further assistance to see what other options are available for you or to find out about
the trade in and trade up program.
Contact HP Worldwide.
Hope this helps.
Thank you for posting on the HP Forums. Have a great day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Photosmart 3180 all in one driver

Hi I an't download the driver for my printer photosmart C3180 all in one I used in windows xp with any problems but now in my computer windows 7 I can't find the driver, please help me.
This question was solved.
View Solution.

Hi all,
The drivers are available at the HP site.
You may download the driver for the C3180 from the following link:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-74950-2&cc=us&dlc=en&lc=en&...
Be sure not to plug the USB till the installation guide to do so.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Re: Satellite P100-160 - Display driver installation failed

Satellite P100-160, PSPAAE, vista 32 bit,
Today Aero wasn't working and not available in graphics properties. Installed latest display driver from Toshiba UK site, Intel 15.0.1.1114. This version was actually older than my current driver but I thought that maybe as it was the only one availabel that it must be correct.
The driver install failed with an error (no details just 'an error has occurred'). Now I have no aero and my display resolution cant be set above 1280x800 - should be 1440x900
To say I am pisseed would be an understatement. Can anyone help? thanks

Hey,
If Aero is not available I dont think its display driver problem
Anyway, have you removed the old display driver before you installed the new one? Go to device manager > right click on graphic card > uninstall. After reboot the display driver should be uninstalled and you can start with display driver installation.
If you install drivers make sure you are logged in as Administrator and antivirus/firewall is disabled. Restart once again and you should be able to choose the native screen resolution now.
Check this!!!

ICH10R one drive always failed RAID0/Big Bang Xpower

Anyone else have a problem with one drive flagged as failed on a RAID array at startup? I have two WD velociraptors on ports 1 and 2 on my XPower, configured as RAID0 on Windows 7 64. After any reboot, the system loads fine but the Intel Rapid Storage Technology console always flags my second HD on port 1 as failed. I know this can't be right as it is a RAID 0 array it shouldn't boot with a drive failed, correct? All I have to do is click on the drive and "reset to normal" and then it shows the drive working as normal. Anyone have any ideas?

No real issues operational wise, and I have version 10.1.0.1008 of the Intel Rapid Storage technology installed, which I think is the latest. The array functions normally, it's just that my drive on port 1 is always flagged as failed on a reboot, which is weird because it's a RAID 0 array. It shouldn't boot with a failed drive, as far as I know. Anyway as soon as I hit "reset disk to normal" all seems well, so I guess it's just more of an annoyance.

Hp psc 1300 series all in one driver

my hp 1300 series printer is not having drivers, i have tried in many ways. but useless effort. At last i came here for all of our friends support, those who are using these above hp 1300 series all-in-one printers. friends please help me in this issue to get a driver for my printer. Thanking you all.

Hi talamala,
if you go to the link below, and under "detect MY Product" on the right, click find now, this should hopefully identify the driver you need
http://www8.hp.com/ie/en/drivers.html
if that doesn;t work, please let me know what OS you are using and the exact model number of your printer I think psc 1300 is the series number not the model number.
regards,
Na-Vi
I am an HP employee, I am speaking for myself and not on behalf of HP.
Click the thumbs up to say "Thanks." Mark Accepted Solution on the post that solves your problem

C6280 All-in-one driver for windows 8.1 - unalbe to select automatice 2 sided printing

I downloaded and installed the driver and full photo print for my old all-in-one but now I don't have the option for automatice two-sided printing.
Is there a different driver specifically for the C6280 printer I can download?
pennyph

Hi @pennyph,
Thank you for visiting the HP Support Forums! I see you have recently installed the full feature software and drivers for your HP Photosmart C6280 and now you do not have the option for two sided printing (Duplexing).
I would like you to start here: Printing on Both Sides of the Paper (Duplexing) in Microsoft Windows
Please make sure you have enabled the two-sided printing module (duplexer):
1. Go into the Printers and Faxes folder.
2. Right-click the device.
3. Click Properties (not Printing Preferences).
4. Open the Device Settings tab.
5. If the duplex unit shows Not Installed, click Not Installed.
Change it to Installed.
The Automatic selection is added to the list of Two-sided printing options in the Printing Preferences (not Printer properties).
I hope this helps! Let me know if you have anymore questions.
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP1510 All in one - Driver installation fails

Similar Messages

Maybe you are looking for