HP2000 Notebook PC, model #E0M17UA#ABA CPU replacement

Simple question, I am wondering if HP2000 Notebook PC, model #E0M17UA#ABA with an AMD processor is soldered to the board or if it is replaceable and if so which part number or catalog can I use to locate a replacement. the 1.3ghz processor is not enough for my wife and I'd like to replace it with 2.3 or something similar.
This question was solved.
View Solution.

No since it is AMD to AMD you should be able to boot the new motherboard off the old hard drive. If it is Windows 8 it will not even make you reauthenticate Windows. The Key Code is stored in the BIOS.

Similar Messages

High CPU usage HP2000 Notebook PC

About 3 weeks ago I purchased your HP2000 Notebook PC, model #E0M17UA#ABA. Almost immediately I started getting "High CPU Usage" messages and everything is painfully slow. It does not matter whether I am reading the news, watching a videa or sorting my email, I get the high CPU message. The system is 10 times slower that the HP that I bought last year for my husband and I find if I don't have alot of time to perform a task I just use his. Over the years we have used HP Products almost exclusively because of their reliability and when I had to replace my last laptop there were several in the same price range but it was the HP name that made the decision. Is this fixable? I travel frequently for work and I need a reliable system that I can actually use.

It is very hard to find the true specifications on this system. The actual processor speed is not listed in most of the literature like this:
spec sheet
With a bit more digging it turns out it is a 1.3 ghz processor with 1 meg of L2 cache and dual cores. Basically, it is a very weak computer processor that is not much more powerful than many tablet and cell phone processors these days. It was made to blow out the door vey inexpensively at Wal-Mart. I just had one of these in my hands yesterday and the owner was having the same problems. Increasing the RAM to 8 gigs helped a bit but the thing that made is useable was to remove all the HP add-on packages, remove the McAfee antivirus and install Avast antivirus and lean up the startup sequence so that not so many processes are constantly running in the background. CPU usage dropped from a constant 100% to the 20s and 30s percent during web browsing and made the unit useable at least. It is never going to be a powerhouse, but if you configure it to run lean and mean it is workable for web browsing, office work and even watching DVDs and online video.
Post back if you want to go through step by step how to do this.

Hp laptop model A9P58UA#ABA 3033cl

i have a hp laptop model A9P58UA#ABA 3033cl model
with the audio beat button bad the laptop don't turn on for this reason
if i press the button the laptop don't turn on
i need this part where i can find it??????
is an emergency i need to travel and i need my laptop with me full working
hp parts support don't have this button this amazing
please help meeeee

Hi cris300, and welcome to the HP Support Forums!
I am so sorry to hear that your HP ENVY 15-3033cl Notebook PC will not boot up. I will try my best to help you resolve this problem.
In this document for Computer Does not Start (Windows 7, Vista, XP) are the steps to resolve this issue.
I am also including this document for Notebook Keyboard Troubleshooting (Windows 7) to troubleshoot the Beats Audio button. If you are not running Windows 7, please let me know what system is running.
I hope this information helps, please let me know.
Good luck and have a great day!
I worked on behalf of HP.

Satellite A200 - CPU replacing

Hi
I have an Satellite A200-130 with CoreDuo 1,86 CPU and I'm thinking about replacing it for Core2Duo 2,0 mainly for ot's little better performance and virtualization options.
Anyone done that?

Generally the CPU replacement is not very easy on the notebooks.
Its trickier as the replacement on the desktop PCs.
First of all you should check if your chipset supports the Core2Duo 2Ghz CPUs.
Usually you could find such info on the Intel page.
Secondly you have to know if the BIOS would support the new Core2Duo CPU.
This is very important because the fan table which is stored in the BIOS controls the cooling modules. If the cooling modules dont work correctly then the notebook would overheat and this could damage the notebooks hardware.
Therefore such CPU upgrades are not advisable and mostly not possible

Hp 920c instalaion cd do I need one to use in a hp2000 notebook?

have printer hpdeskjet920c to use in a hp2000 notebook pc. do not have an installation cd. must i have an installation cd? how can i get one?

Hi,
welcome!
What type of interface you need depends on what you want to do. In general, for home recording, a 2 channel interface, maybe with MIDI in/out, is sufficient. Good brands are, for example, Presonus, MOTU and Apogee. Most Logic user that use the Apogee Duet like it very much because of it's superior sound quality. The old rule is true, also: You (usually) get what you pay for. So don't expect too much out of a 100$ interface that has many features. It probably will also feature hissy preamps and buggy MIDI.
I have worked with cheap interfaces, though, and they can be usable, nevertheless. I have an Alesis I/O 2, and it works okay. Also my Tascam Fireone is nice, although the preamps lack some quality. I have worked with an Edirol UA-25EX, too, and like it very much. But the next time i buy an interface, it will definitely be a MOTU or the Apogee Duet.
Fox

HT3939 I buy iphone 5 from us and when i back to saudi arabia I found the model A1428 how to replace it to model suuport in saudi arabia like A1429

i buy iphone 5 from us and when i back to saudi arabia I found the model A1428 how to replace it to model suuport in saudi arabia like A1429
or A1429 will be support in saudi arabia

Return the existing iPhone to the US if still in the return window then buy the model you want somewhere outside the US.
Only the A1428GSM and A1429CDMA are sold in the US.
Apple does not sell or offer the A1429GSM in the US.
Apple will not exchange an iPhone for a different model in a different country.

This is what i have:eMac Machine Model:     PowerMac6,4   CPU Type:     PowerPC G4 (1.5)   Number Of CPUs:1   CPU Speed:     1.42 GHz   L2 Cache (per CPU):     512 KB   Memory:512 MB   Bus Speed:     167 MHz   Boot ROM Version:     4.9.2f1? can i update

this is what I have
eMac
Machine Model:          PowerMac6,4
CPU Type:          PowerPC G4 (1.5)
Number Of CPUs:          1
CPU Speed:          1.42 GHz
L2 Cache (per CPU):          512 KB
Memory:          512 MB
Bus Speed:          167 MHz
Boot ROM Version:          4.9.2f1
can i update to snow leopard?? and how? im having a hard time its my first mac.   I need to to create documents, Im trying to avoid buying a new computer.

You cannot upgrade to snow leopard. Snow leopard was the first of os x to drop support for the motorola ppc processors. The latest you could possibly run would be leopard.
Hope it helps,
Ryan

Lenovo 3k out of warranty -is it worth getting MB or CPU replaced?

Just getting started on this repair for my friend, so haven't priced out a MB or CPU replacement;
Is it worth (cost effective) to work toward replacing a cpu or mb if one or the other is defective?
The system is reliably turning off on its own within 10 seconds or 10 minutes; with most all accessories removed, and wether in the bios or booted into the utilities section of the hdd, the system will turn off after a short period of time -on a/c power-.
It's a Lenovo Product: 3000 N100 0768-DLU
any replies i'm very interested in. THANKS. Matt

Mark_Lenovo wrote:
narukthul,
Sorry you had a bad experience. Can you explain a bit more? It sounds like you had some service while still in warranty, that may or may not have been related to the GPU, and now you are having these symptoms.
How far outside of warranty are you?
When was your last repair that you reference and when did these symptoms occur?
Best regards,
Mark
i had my display replaced with the rubbishy refurbished parts lenovo uses to repair warrantied computers. It came back unsurprisingly worse off than when i sent it in. I believe they had attached the display cable incorrectly to the motherboard causing the display to flicker and to display a garbled picture as well. it took 3 more send ins to the lenovo depot for them to fix it and by the last time i got my computer back my warranty was expiring then less than a month later my display picture would consistently become more garbled overtime both when viewed via laptop display and external monitor.
I did not have these issues before sending my computer in for "service" The fact that external monitor display was also garbled beyond recognition indicates either damaged GPU hardware or software. Operating under the assumption that the video driver software had become corrupted I tried several different driver versions and even uninstalled and reinstalled from scratch to no avail. Given that a reinstall of the video driver was inneffective I am confident that when I sent my computer in for "service" the technicians attaching the display cable to the motherboard caused damage to the GPU over the 4 times I had to send my computer back in because of the loose display cable. Essentially I sent in a working computer for service and lenovo sent me back a paperweight.

Cpu replacement for hp Model: dv6-3164si

Hi guys i normally dont ask for help i just search and search for it, but ive come up short on this one, basically i have a
hp pavillion dv6-316si with a AMD phennom 2 N950 quad core 2.1Ghz cpu and i woul like to replace it with a beter one now what i need to know is there a better cpu for this laptop and what would it be and where could i purchase it it doesnt have to be a quad core i just want something with a bigger punch than the current cpu?
many thank in advance...
This question was solved.
View Solution.

Here is the Manual:
Manual
Processor list is on page 2. You already have the second best compatible processor. The only faster one the motherboard will accept is an N970. It is not worth the hassle for .1 ghz.
You have 6 gigs of RAM and could have 8. Also, a solid state drive would add significant punch. These are about your only options to speed it up.
If this is "the Answer" please click "Accept as Solution" to help others find it.

CPU replacement

Hello,
I have a HP Pavilion dv5-1060ew notebook, with Intel Core 2 Duo P8400 @ 2.26GHz in it. I want to replace some components of it so I can use it some more and not keeping it in a closet (I won't sell it, since it's a present from my family.)
So far I replaced cooler and RAM and I want to replace CPU aswell. What I've read so far is that I can safely put Intel Core 2 Duo T9600 in my Socket P.
I was wondering if it's possible to install a quad CPU in my notebook and if it was possible, which one could I put in it so it could work?

Xaryon wrote:
Strange, I found it right away:
http://h10025.www1.hp.com/ewfrf/wc/product?cc=pl&lc=pl&dlc=pl&product=3767372
Hi,
You edited your post to get the right product at:
12-31-2014 07:20 PM - edited ‎12-31-2014 08:03 PM
My first reply was at:
12-31-2014 07:53 PM with model number: dv5-160ew
No strange.
Happy New Year.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

H.P. 635 CPU Replacment.

Is it possible to upgrade the CPU in the H.P. 635 and if not, is it possible to replace the mother board?
This is a (H.P. 635, 2.60 ghz. CPU , Windows 7, 64 bit).

Hello danielrwaters. I understand you'd like to upgrade your CPU or replace your motherboard.
I can locate the parts and information for you if you provide me with your product number. This identifies the notebook. This document can show you where it is located.
Once I have this information I'll see what parts are available for your notebook.
I hope you have a great weekend!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

G62-355dx cpu replaced still not working

My g62-355dx is still not working after replacing the cpu (thats what the blink code was....caps lock blinking once every few seconds) so after replacing the cpu I am still getting the same blink code....tried the hard reset before replacing the cpu but havent tried it after....I just need to know if its possibly the mother board and if a motherboard from a different g62 model will work in my 355dx....
This question was solved.
View Solution.

This is about the third post of its type I have fielded in the last month or so and I will repeat what I have always maintained. It is almost never the CPU, regardless of the blink code. It is almost always the motherboard. Your by far safest bet is to replace like with like although likely another g62-300 series motherboard will work, if it has any feature yours did not or vice versa it may take some case mods to make it fit and you want to avoid that.
You will need the Service Manual:
.pdf of manual here
Your motherboard part number can be found inside the memory compartment. Post back if you want detailed help finding a replacement.

Dual 1.25 CPU replacing a dual 1ghz

Hi!
Is there somebody who knows if I can replaced the dual 1Ghz CPU (MDD model) by a dual 1.25Ghz CPU (from an other computer that has a dead MDD computer motherboard).
Would it be a direct replacement ?
Thanks

Hi!
Is there somebody who knows if I can replaced the dual 1Ghz CPU (MDD model) by a dual 1.25Ghz CPU (from an other computer that has a dead MDD computer motherboard).
Would it be a direct replacement ?
Thanks

Mac air 2010 model just had screen replaced but its dead, no display nothing. the thunderbolt port works fine, this is how I'm asking my question i.e.; on the mac air, if anyone can help get this new screen

hi
im a newby to this but i really need help fixing my macbook air a1369 2010 model display screen, i have replaced all new but its just dead a black screen with no power getting to it at all even the backlit led is dead so the inverter isnt getting power to it either. everything works perfectly through another monitor hoocked into the thunderbolt port, its just theres no power going into the built in display.
i would really appreciate some pointers as to whether theres any fuses that i could change or any pointers on getting the display to work at all. thank you for taking the time to read this and hope you can help a newby get back up & running.

Confused, if you just had screen replaced was it working when you picked it up? I'd call whoever fixed it and report it ASAP.

HP G56 Notebook Prod id XG773UA#ABA

Replaced hdd with new WD hdd , larger size than original, ran recovery disks, all appeared to be going successfully..but would not boot up in Windows. Ran all kinds of diagonostic tests....eventually got dialog saying....&quot;Recovery manager could not restore your computer using the factory image. Please contact HP support.&quot; Error Code: 0xe0e0ef000e. Tried all options repeatedly. Does this error code tell anything? Thanks for assistance. AJL

Hi,
This sounds like a problem with the Recovery Discs - so you could try ordering a replacement set from HP Here.
However, there is an easy work around to avoid this if you have ( or can borrow ) a retail Windows 7 installation disc that is exactly the same version as your OEM installation - ie if your notebook came with Windows 7 Home Premium 64bit this is the exact retail version you would need.
Use the disc to perform the installation, enter the Windows activation key found on the underside of your notebook when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers you may need can be found Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HP2000 Notebook PC, model #E0M17UA#ABA CPU replacement

Similar Messages

Maybe you are looking for