HP2055 prints solid black lines how do I clear this?

When printing to HP2055 any html web page results in output looking like redaction (thick black lines running entire width of page - some have texture but mostly solid black). Does not happen with any other printer. Replaced drivers. Deleted and reinstalled Firefox. Wiped profiles folder under /local. problem persists. Can print other apps fine such as WORD. only happens with Firefox to 2055.

Check print margins.
#In order to check the margins, we need to go to ''File'' > ''Page Setup''.
#Once this is done, switch to the ''Margins & Header/Footer'' tab.
#Check what's set there under ''Margins''.
The following are the default values for ''Margins'':
'''Right''': 12.7
'''Top''': 12.7
'''Left''': 12.7
'''Bottom''': 12.7
Check these values accordingly and change them if necessary.

Similar Messages

Officejet 6310 prints solid black line instead of text.

Good day. My officejet 6310 has started printing a 3/8" solid black line instead of text. I've replaced both color and black cartridges. I've also run align and clean cartridges. Does anyone have helpful suggestions?

This type of result is often due to errors in the HP printer drivers. Several things can be tried. Sometimes, using a tested driver for an older, but compatible printer will do the job. A lot of folks used the use the HPLJ2 driver even with HPLJ3 and 4 systems. Another option is to try to print as a graphic. At this point, I can only suggest playing around with things. A lot of folks like the graphic driver aspect instead.
You might also consider printing to the printer in a PS mode rather than PCL if that option is available.
I am only suggesting things I have seen tried by various folks. I don't have a good explanation.

HP Officejet 6700: No Option To Print In Black Only/How Do I Do This?

I recall this option used to be present, now I no longer see it--how do I print in black only?
Thank you.
This question was solved.
View Solution.

I found it:
It's now under File, Print, Preferences, Advanced, Print In Greyscale, then drop box Black Ink Only.
I'd like to thank me for my help one this one...couldn't have done it without me.

On my start page a line of data, e.g., "Most Visited" - "Getting Started," 'Latest Headlines," appears between the data line containing the URL and the tab line; how can I clear this line?

This is about as specific as I can get.

That will be the bookmarks toolbar. To hide it, in the View menu select Toolbars, then click on the "Bookmarks Toolbar" entry to de-select it.
You can also control-click on a toolbar and click on eh "Bookmarks toolbar" entry.

Occassionally print solid black pages instead of text

Sometimes (but not always) pdf files print as solid black rectangles - how do I prevent this?

This type of result is often due to errors in the HP printer drivers. Several things can be tried. Sometimes, using a tested driver for an older, but compatible printer will do the job. A lot of folks used the use the HPLJ2 driver even with HPLJ3 and 4 systems. Another option is to try to print as a graphic. At this point, I can only suggest playing around with things. A lot of folks like the graphic driver aspect instead.
You might also consider printing to the printer in a PS mode rather than PCL if that option is available.
I am only suggesting things I have seen tried by various folks. I don't have a good explanation.

Solid Black Lines/Blocks Over Personal Data

Some printouts have solid black lines and/or solid black boxes in sections of the printed page. They generally appear over areas containing personal data (name, address, account #, etc.). Typically happens when printing statements from third-party websites. Occurs when printing black and white only and when printing color. Printer is calibrated and not experiencing other issues. Any thoughts oh what is causing this and how to correct? Thank you.

Welcome to the HP Forums , I saw your post about some of your printouts having the personal data blacked out when they print out. I have personally heard of some third party websites printing forms like this for security reasons. However, you can try printing them from another web browser, which has worked for some. If you are using Internet Explorer, try Google Chrome, or Firefox. Free Download - FirefoxFree Download - Google Chrome Let me know what happens!If you wish to thank me for my response lending a helping hand, click the below!

5800 express solid black line across bottom of dis...

hi everyone
please can someone help me
i have a nokia 5800 which up until now has been great.
however i noticed recently that at the bottom of my screen there is a thin solid black line which goes from end to end
so much so it even crosses out the word 'options' and 'exit' - since its solid and black
i dont know why its doing this as it has never happened before
i am using the latest firmware V20.0.012
why is this black line there? why wont it go away?
i have tried everything from removing the battery to resetting to settings to default to changing my themes and wallpapers
nothing seems to remove it
its always there
even on the nokia shut down and start up screens it is clearly visible
please help. any suggestions would be most appreciated
Message Edited by coolj0800 on 22-Jun-2009 01:58 PM

guys
would you believe that when i remove my memory card the solid line dissapears and the display is perfect!
but now when i put the memory card back in and switch on the phone, there is no boot up ie i have my white screen with NOKIA and then it just switches off- no matter how many times i try the same thing happens
but when i take the memory card outand switch the phone on again, the phone boots up perfectly
what is going on? is the memory card corrupt? i have only used 500mb out of 8 gigs and the phone is only a few months old. what must i do? should i try formatting the card? or put in a warranty claim for a new memory card as this BS?
thanks again for your advice
regards
coolj

Laserjet P3500 printing solid black edge left side of paper

Just started recently having this problem. Left side of page has solid black line about 1/4" wide top to bottom. I checked register of paper and it is perfect. Using windows XP Pro on a Dell computer. I checked the green roller and it is clean. Using genuine HP cartridge. Don't know what else I can tell you about this problem

Hi there,
Print quality troubleshooting pages
Use the built-in print quality troubleshooting pages to help diagnose and solve print quality problems.
Press MENU to enter the MENUS .
Press (Down arrow) to highlight DIAGNOSTICS .
Press (Select) to select DIAGNOSTICS .
Press (Down arrow) to highlight PQ TROUBLESHOOTING .
Press (Select) to print the pages.
The printer returns to the Ready state after printing the print quality troubleshooting pages. If print quality defects are found when reviewing the print quality troubleshooting pages, perform a printer calibration. See the following section "Calibrating the printer " for more information.
Calibrate the printer
Calibration is a printer function that optimizes print quality. If experiencing any print quality problems, calibrate the printer.
Press (Select) to enter the MENUS .
Press (Down arrow) to highlight CONFIGURE DEVICE .
Press (Select) to select CONFIGURE DEVICE .
Press (Down arrow) to highlight PRINT QUALITY .
Press (Select) to select PRINT QUALITY .
Press (Down arrow) to highlight CALIBRATE NOW .
Press (Select) to select CALIBRATE NOW .
Wait for the printer to calibrate.
You can also find the article for this product here:
http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?prodSeriesId=315862&prodTypeId=18972
Under the troubleshooting section, click on print quality issues. There are more articles and there is more information regarding issues such as this located there if this doesn't fix the problem.
Hope this helps!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

When I print a 4x6 color picture using an iMac with the latest operating system using a Canon MX892 printer, faint black lines appear every 3/16 of an inch. When I print the same picture using iPhoto there is no problem.

When I print a 4x6 color picture using an iMac with the latest operating system using a Canon MX892 printer, faint black lines appear every 3/16 of an inch. When I print the same picture using iPhoto there is no problem. Any suggestions?

What is the resolution of the picture that you are trying to print?
Go to Image>resize>image size, read the resolution in px/in, then report back, please.
Also, are you in a position to try printing with another printer in an attempt to narrow this down?

M3035 all in one. Printing solid black page

Unit prints solid black page. Tech manual covers black page with white specs, replace print cartridge. New cartridge same results. Tried engine test same results. Unit not under warranty. Next step?

Open System Preferences > Print & Scan then select the Print tab then click Open Print Queue
Delete all jobs from the print queue
Restart your Mac and restart the printer.
See if that made a difference.
If not, might be corrupted print preferences ...
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Preferences/com.apple.print.PrintingPrefs.plist
Click Go then move the com.apple.print.PrintingPrefs.plist file to the Trash.
Try printing.
message edited by: cs

Office jet pro 8600 prints solid black

When I print a copy using black ink only the page prints solid black.

Hello there! Welcome to the forums @janvlz
I saw your post about your printer printing out in solid black ink, and wanted to recommend a troubleshooting guide for you to try!
Fixing Print Quality Problems for the HP Officejet Pro 8600 e-All-in-One Printer Series
If the issue continues, please give us a call to see what your printer options are with HP.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Happy Monday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HT1725 I purchased several books from itunes and on my iphone it shows the book cover, but I cannot open them. There is a solid black line on each cover. Any suggestions?

I purchased several books but on itunes but cannot open them on my iphone 4S. I purchased one without problem. However, the next several appear in my library but have a solid black line on the cover as though they haven't downloaded. When I check my itunes account for possible downloads, it shows everything has been done. Any suggestions?

Could you take a screenshot of this line?
Press home and sleep button at the same time I believe.

(Yellow) Highlights appear black. How can I fix this?

Today I woke up to find that I can't read the highlighted parts of my PDFs because they suddenly appear black. I have a Mac. Any suggestions as to how to fix it? Many thanks.

Hi Anubha Goel. Thank you for your response.
No, the document was not sent to me, and it happens with all my PDFs.
MAC OS: 10.6.8
I already tried what you suggested. Still looks black.
Another weird change: when I select a line or two, instead of the selected
part looking blue (as it did before), now it looks black and the letters
look orange.
Thank you.
Regards.
2015-04-06 6:08 GMT+01:00 Anubha Goel <[email protected]>:
You have been mentioned
by Anubha Goel
<https://forums.adobe.com/people/Anubha+Goel?et=notification.mention> *in
Re: (Yellow) Highlights appear black. How can I fix this? in Adobe
Community* - View Anubha Goel's reference to you
<https://forums.adobe.com/message/7409808?et=notification.mention#7409808>

When i take a picture with flash in a dark place , the photo appears with a blue line . how can i default this ?

when i take a picture with flash in a dark place , the photo appears with a blue line . how can i default this ? is this normal ???

You probably have a filter set for the normal camera mode but not the square.
To fix, in Photo mode, touch the filter icon (three circles) and select None for the filter.

Ordered prints. Several were cut off at edges or were printed off center. How do I prevent this in the future?

Ordered prints from my Mac library to Apple. Several came back cut off or printed off-center. How do I prevent this in the future?

How do I prevent this in the future?
Before ordering any print product proof it by creating a PDF file of it according to this Apple document: iPhoto, Aperture: Previewing an order in iPhoto or Aperture. Save the PDF file to compare with the printed copy when it arrives.
For this book contact Apple via the 800-275-2273 phone number. Apple has been very good a correcting problems. They gave me a refund so I could order again.

HP2055 prints solid black lines how do I clear this?

Similar Messages

Maybe you are looking for