HP2338H MONITOR TURNSON THEN THE SCREEN BLACKSOUT AFTER 5 SECONDS

HP2338H MONITOR TURNSON THEN THE SCREEN BLACKSOUT AFTER 5 SECONDS

Hi OLYADKRAM:
Thank you for you inquiry.  I understand that your monitor goes black or blank, I am sending you a  link to a document on "Monitor is Blank"  click here.
I hope this helps. Please let me know how it went.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Similar Messages

  • I was updating google translate on my phone then the screen just black out. I thought battery went flat but after I put on charge, it's still not working. Please help!

    I was updating google translate on my phone then the screen just black out. I thought battery went flat but after I put on charge, it's still not working. Please help!

    Hello 74birdy
    The article below will assist with troubleshooting your iPhone not responding.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • I have an iPhone 4 and recently updated the software.  Since then, the screen will not turn off after the 1 minute autolock.  How do i fix this?

    I have an iPhone 4 and recently updated the software. Since then, the screen will not turn off consistently after the 1 minute auto-lock.  How do I fix this?

    Settings>General>Auto Lock

  • TS1373 my  5th generation ipod acts like it is going to sync and then "ejects" itself before even 1 song can be synced. It then doesnt recognize that it has been ejected and keeps the"do not disconnect" icon on the screen even after unplugging. What do I

    my  5th generation ipod acts like it is going to sync and then "ejects" itself before even 1 song can be synced. It then doesnt recognize that it has been ejected and keeps the"do not disconnect" icon on the screen even after unplugging. What do I do?  it also makes a lot of noise while connected to the computer.

    Is the camera damaged? Could be a hardware problem.
    Try:
    Close the Camera app in the multitasking bar, then try again.
    Restart/Reset/Restore your iPod. In that order.

  • The screen of my imac always goes to the maximum exposure. Then the light icon on the screen. After reducing the brightness goes my screen after a few minutes back to the maximum intensity with the brightness icon back on my TV screen.

    The screen of my imac always goes to the maximum exposure. Then appear the light icon on the screen. After reducing the brightness goes my screen after a few minutes back to the maximum intensity with the brightness icon back on my screen.

    Try resetting the SMC and if that doesn't work then reset the PRAM too.
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and all peripherals.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Attach the computers power cable.
    Press the power button to turn on the computer.
    PRAM RESET
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • I have been having trouble with my iphone 4 for the past day . i tried to update it to 7.0.4 then the screen went blank and it keeps telling me to connect to itunes . I have connected it to 2 computers , using different cords

    I have been having trouble with my iphone 4 for the past day . i tried to update it to 7.0.4 then the screen went blank and it keeps telling me to connect to itunes . I have connected it to 2 computers , using different cords and it doesnt recognize it . It says it is in recovery mode and i need to restore . after clicking restore it says that my iphone cannot be restored . I am very frustrated because i have been online searching for solutions all day and nothing seems to work . As soon as i turn on my phone it goes to the apple logo for about 2 seconds then the connect to itunes screen . SOMEBODY PLEASE HELP ! my phone is my life and i need it back on .

    Connect the device to iTunes and restore from the most current backup.
    If the issue continues, restore as new.

  • Just bought a new iphone4 and was loading os6 and now it won't turn on. the apple glows like it is starting up, then the screen goes black and then repeats the same process over and over. i have tried to reboot multiple times now

    just bought a new iphone4 and was loading os6 and now it won't turn on. the apple glows like it is starting up, then the screen goes black and then repeats the same process over and over. i have tried to reboot multiple times now

    I am assuming the phone was working prior to you installing IOS 6? Did you use itunes to install IOS 6 or just run from the phone?
    When I tried to do the Over The Air update to IOS6 on my iPhone 4, it errored out and I had to connect it to iTunes and select "Restore" from the summary screen after iTunes finds the phone is connected. If this works for you, it will go through a couple of reboots that take a few minutes to complete. It should then give you the option to start with a fresh new phone or to use one of your previous backups to load your contacts and other information, provided you have backed up the phone previously.
    I hope this helps you my friend!

  • When I turn on my iPhone 4S the apple logo pops up for a split second then the screen goes black but the phone itselfs boots up just fine???

    I tried replacing the screen with no luck. The same thing happened with the new screen. I replaced the backlight coil and the backlight ic and still have the issue. I don't know what else could be the problem. If the battery is completely dead and I plug it in the "charging battery" symbol shows just fine during the entire time it is charging, but as soon as it starts to boot up the apple logo shows for a split second then the screen goes black. The rest of the phone still boots up just fine. I can use SIRI, press the lock button like I'm about to use my phone and slide my thumb across where the "slide to unlock" would normally be and it will make the unlock noise just no picture display. I am pretty tech savvy when it comes to repairs and all of the connections look fine, replaced backlight coil and ic, replaced LCD/digitizer, tried a restore, tried a DFU restore, multiple hard resets, but I am at a loss as to where to go from here. I had dropped the phone and put a minor crack in the screen but the phone worked just fine for a couple months after before this started to happen. The phone is still under apple warranty but apple won't cover it because Apple is stating that it is "caused by the crack in the screen." But being a repair technician I know that is not the case... Good one apple. So I took it upon myself to try to determine the REAL problem. Anyone with a little more knowledge have any ideas? Any suggestions are appreciated!!

    Yes, I understand that. But The screen issue is not a result of user damage. The phone was not dropped when the screen got cracked. My daughter was standing in a chair at the table and dropped one of her toys onto the bottom of the phone and cracked it right by the home button. (Nowhere near the LCD/digitizer flex cables, connections, or logic board components) then a few months later my phone had died, I plugged it in, it showed it was charging, then Apple logo disappeared and screen didn't work. AFTER contacting Apple about the issue and them telling me that it "is a result of the very minimal crack to the sheet of glass that has no relation to the LCD or Digitizer and that the warranty does not cover it I had taken it upon myself to change the LCD/digitizer to no avail, as well as backlight ic and backlight coil to no avail. But how do I go about letting Apple know that it is in fact NOT due to the cracked screen nor is it due to the flex cable connections? I can't. So the lady that works the call center phones  trying to "convince" me that she knows what she is talking about and "convince" me that it is from the cracked screen I have to take her word because I can't show Apple that its not because of that without paying them $199 to fix the screen in which case they will just send me a new phone rather than fix the faulty hardware under warranty.

  • I recently did the latest update. My Ipad 2 would not turn on, and then the screen with the apple logo started flashing. I tried the recovery restore, but I kept getting error messages. What should I do?

    I recently did the latest update, and then I charged my Ipad 2 afterwards. I went to use my Ipad 2 days later, and it would not even turn on. Then after a couple minutes, the apple logo appeared as if it were loading. It continued to do this for a few minutes, and then the screen starting turning on and off. Then 5 minutes after that, my lock screen appeard and froze. Then it shut itself off again. I tried plugging my ipad into Itunes to do the recovery restore, but I kept getting error messages.

    Unable to Update or Restore
    http://support.apple.com/kb/HT1808

  • Ipod froze then the screen it just lite up with nothing on it

    ipod froze then the screen is just lite up with nothing on it can't turn it off

    - Try:
    iOS: Not responding or does not turn on
    - If not successful and you can't completely turn the iPod off let the battery fully drain. After charging for at least an our try again.
    - Then time for an appointment at the genius Bar of an Apple store.

  • When i plugged my ipod into the computer it started to make buzzing and screeching noises. It became hot so i removed it and then the screen froze while it continued to make these noises. I have never had anything like this happen.

    When i plugged my ipod into the computer it started to make buzzing and screeching noises. It became hot so i removed it and then the screen froze while it continued to make these noises. I have never had anything like this happen. (never gotten it wet or had it exposed to extreme temperatures) It is also unresponsive to any buttons on the ipod and it didn't show up when i plugged it into my computer. What do I do? Also if it is unfixable could i get a free one from apple?

    Hey briannagrace96,
    Welcome to Apple Support Communities! I'd check out the following article, it looks like it applies to your situation:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/ts1363
    You'll want to go through the following troubleshooting steps, and for more detail on each step follow the link to the article above:
    Try the iPod troubleshooting assistant:
    If you have not already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
    If the issue remains after following your iPod's troubleshooting assistant, follow the steps below to continue troubleshooting your issue.
    Restart the iPod Service
    Restart the Apple Mobile Device Service
    Empty your Temp directory and restart
    Verify that the Apple Mobile Device USB Driver is installed
    Change your iPod's drive letter
    Remove and reinstall iTunes
    Disable conflicting System Services and Startup Items
    Update, Reconfigure, Disable, or Remove Security Software
    Deleting damaged or incorrect registry keys
    Take care,
    David

  • I tried updating my iPod touch to the newest update. But my iPod was unable to complete the update now it doesn't even turn on completely. The apple logo appears but then the screen goes blank. What should I do?

    I tried updating my iPod touch to the newest update. But my iPod was unable to complete the update. Now my iPod doesn't turn on completely. The apple logo appears but then the screen goes blank. I've tried charging it, letting it discharge, I've tried things I found on the internet but nothing seems to be working. What can I do?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       
    Original text by lllaass
    -Ethan

  • My itouch won't turn on. All that shows is the apple icon and then the screen goes blue to white. Is there a way to fix this or is my itouch unfixable? HELP ME!!!

    My itouch won't turn on. All that shows is the apple icon and then the screen goes blue to white. Is there a way to fix this or is my itouch unfixable? HELP ME!!!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • My macbook shows up the apple at startup and then the screen turn blue

    As I said, when I turn on my macbook, the apple appears and then the screen turns blue and stays like that.

    I have a Macbook (purchased in september 2008) in India. I got a blue screen error in 2010 when it was under the Apple care protection plan. I took it to the service centre and they replaces the Logic board to sort this error. After that the blue screen error appeared in 2011, 2012 and 2013. For the past 2 years, I have taken in the macbook atleast 5 times for the same error and the service centre had been re-formatting it and giving it back to me. But the problem kept re-curring. No proper diagnosis is being given at this apple authorised service centre.
    I finally called up Apple tech support, who made me give the machine back to the same centre. Techsupport asked them to perform some check measures and finally decided that the OS being installed in my machine was the wrong one.
    So the Service centre installed the original one from the CDs I had.
    But this is no resolution as no one is willing to comment on this service measure nor is there any assurance that this will not happen again.
    I have spent more than 15,000 rupees on the repairs for the past 2 years and am fed up of this.
    I came to know from an Apple source that in the US, Apple has no "repair" policy and in the event of such a case, replaces the machine.
    Can anyone here guide me on this please?
    I will be grateful for any and every input.
    The Apple authorised service centre is TRESOR SYSTEMS in Gurgaon, Haryana, India.
    thanks a tonne
    Shalini

  • I have an apple tv 3rd gen and when i try to open HBO GO it loads but then the screen comes black,it doesnt work.what can i do?

    I have an apple tv 3rd gen and when i try to open HBO GO it loads but then the screen comes black,it doesnt work.what can i do?

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router.
    Reset the Apple TV (Settings > General > Reset > Reset all settings)
    Restore the Apple TV (Settings > General > Reset > Restore)

Maybe you are looking for

  • Trying to install 10.5 on G5 imac

    Hello: I just came into possession of a G5 imac that I'm trying to upgrade to 10.5 Leopard. It's a: 1.8Ghz G5 1.5 GB ram 80Gig HD Unfortunately, when I pop in the 10.5 install dvd & select install......reboot.....during the reboot process, the system

  • How to write a return in a text file.

    Hi, i am trying to write diferent lines into a text file, i write strings ending with \r\n but it doesn't work, how could i write in diferent lines? Thanks.

  • Arranging files with in a portfolio for adobe standard 9

    I have been trying to figure out a way to arrange and save the files in an order that is not alphbetical with in a portfolio.  So far I haven't been able to and renaming them to be alpahbetical isn't condusive to what I am trying to do.  Any ideas?

  • Allowed GR reversal affecting the project costs

    Hi, We have just performed our month-end settlement but when we are tallying our project costs and project costs clearing accounts, we have noted discrepancies. The discrepancies were from the reversals of GR for projects costs that were already sett

  • Calling all iPod Classic owner who wants to use iPod Camera Connector

    Dear All Honoured iPod Classic users a.k.a Photo Enthusiats, Good day. I have recently bought an iPod Classic and iPod Camera Connector. As many of us may be into photography. I believe you may agree with me, it is more expensive to buy CF Card espec