HP2600n suddenly stopped printing in Windows 7 system 64-bit--why? No error mes, no system changes

After two months, HP2600n suddenly stopped printing in Windows 7 system 64-bit--why? No error mes, no system changes.
I tried reinstalling the drivers, changing USB ports and cables, printing from Notepad, and disconnecting the printer.
My computer will not let me uninstall the driver software, and I tried downloading the software upgrade to do that.
Printer works with computer running XP.
I am guessing that I need a driver upgrade.
Which one?
Thanks, whoever!

Which version of the tool box are you using?Mine would not open after installting updates but after installating the latest version its working fine
http://www-307.ibm.com/pc/support/site.wss/MIGR-73783.html
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

Similar Messages

HP Laserjet p2015d auto duplex printing with Windows 7 64 bit operating system

I have used the HP Laserjet p2015d with Windows 7 32 bit operating system and have been able to use the AUTOMATIC DUPLEX feature of the printer without problems.
Now, however, I have installed the 64 bit version of Windows 7 operating system and the AUTO DUPLEX does not work and is not shown as being available on the PROPERTIES menu of the printer.
Is it possible to use the AUTO DUPLEX feature of the printer with Windows 7 64 bit operating system.
All replies welcomed! Aaron in Calif.

Hi Aaron,
Make sure the Automatic Duplexing option is enabled:
Enter Control Panel > Devices and Printers.
Right click the printer icon, then click Printer Properties.
Click the Device Settings tab.
Set the Automatic Two-Sided Duplex Accessory as installed and click OK to save the change.
Now Automatic Duplexing should become available.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

My Adobe Photoshop Elements 7.0 (Editor) function has suddenly stopped working. Windows cannot seem to solve the problem. Any anwers

I receive Adobe updates on a regular basis without any problems. The other day, my Adobe Photoshop Elements 7.0 (Editor) function has suddenly stopped working. Windows cannot seem to solve the problem. I can open all the other function buttons without any problems just not the most important one which is the Editor Function. Has anyone experienced this situation and knows what to do?

Did you tried uninstalling and then installing it again?
Ankush

My iMac (OS 10.7.4) has suddenly stopped printing to my Epson CX4800 printer through Airport Extreme, although it will print if connected via USB. Meanwhile, my MacBook (OS 10.5.8) prints still prints wirelessly. Please help.

May iMac (OS 10.7.4) has suddenly stopped printing to my Epson CX4800 printer through Airport Extreme, though my MacBook (OS 10.5.8) continues to function just fine). The iMac will print if it is connected to the printer directly via USB. The iMac continues to connect to the Internet wirelessly. I've tried resetting the printer and ensuring the driver is up to date, but no joy.
Any suggestions?

EPSON Stylus CX4800 All-in-One Printer
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=58606&prodoid=56291 067&infoType=Downloads&platform=Macintosh

1300 suddenly stops printing multiple copies

My Laserjet 1300 suddenly stopped printing multiple copies. I am using the driver supplied with win7 and it has been working for the last year. I have tried installing PCL6 driver instead of PCL5 and I can print multiple copies for one job only and then the computer does not recognize the printer. Has HP sent an update that has changed the way win7 works with the printer? Any one with a solution or idea? Thanks, John

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
Click on New Post.
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

My iPad has suddenly stopped printing to my hp AirPrint printer although it says that it has contacted the printer. My iPhone still prints o.k.

My iPad has suddenly stopped printing to my hp AirPrint printer. It was working fine but now although it says it has contacted .the printer etc. nothing prints. My iPhone still prints o.k. So don't think it is the printer or router

Try rebooting your iPad by pressing and holding the Home and Sleep buttons at the same time until the Apple symbol appears (Ignore the power off slider).

ITunes stopped working on Windows 7, 64 bit. Uninstalled and attempted to reinstall. Windows installer error....iTunes. 10.6.3.25

iTunes stopped working on Windows 7, 64 bit. Uninstalled and attempted to reinstall. Windows installer error....iTunes. 10.6.3.25.
Downloaded latest version onto desktop. Will not complete install.

Many thanks.
Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

My I pad suddenly stopped working then i connect it to iTunes it make error 4014 can you help me please

my I pad suddenly stopped working then i connect it to iTunes it make error 4014 can you help me please I pad 4

If the phone shows the "connect to iTunes" screen, the data on the phone is most likely lost.
Connecting in recovery mode is your only chance to use the phone again, besides getting it serviced by Apple.
iOS: Unable to update or restore

During installation of itunes using Windows 7 64-bit, I have this error come up every time during installation. Tried uninstalling and re-installing, tried msconfig startup and service checks. At my wits end. Help!

During installation of itunes using Windows 7 64-bit, I have this error come up every time during installation.
"An Error occured during intstallation of Assembly "Microsoft .VC80.CRT type="win32". version="8.0.50727,6195", public Key Token="1fc8b3b9a1e18e3b, processor Architecture'+x86'". This is all followed by some more text and code HRESULT:0x80070005
Ive tried uninstalling and re-installing, tried msconfig startup and service checks. At my wits end. Help!
Anne Marie

Probably should've searched around a bit more. Just saw a similar forum post to my own in which redownloading and burning solved another user's similar issue. As of now I've redownloaded the 64-bit ISO, burned it, and so far so good (at 72% extracting files). I will repost here if it was a success in hopes that other users with a similar issue find this and benefit from it. Hope I didn't just waste anyone's time with a question that had already been answered (haha)

Not able to install Adobe Flash Builder in windows xp 32 bit OS. Getting error msg 64 bit required.

Hi All,
Not able to install Adobe Flash Builder 4.7 in windows xp 32 bit OS. Getting error msg 64 bit required.
Pls help me for installation.
thanks in advance.

You don't have service pack 3 most likely. Refer to the tech specs:
http://www.adobe.com/products/flash-builder/tech-specs.html
Mylenium

V4 Print Drivers suddenly stopped working on Windows 8.1 machine on a Windows 2012 r2 Domain

Today one of our newly setup windows 8.1 machines stop printing to a Toshiba copier that was setup on a domain controller with the printers role installed. The Toshiba copier was setup using Microsoft default Toshiba PLC6 V4 printer driver.
The computer in question was printing to the copier minutes before the user shutdown to go to lunch. When the user returned, printing to the Toshiba copier was not working. However others in the office where printing to the Toshiba copier
just fine. I decide to try and print to other printers and found that the Microsoft XPS printer was not working also. I also found that all the other printers that where not using V4 printer drives printed just fine. The Toshiba copier and
Microsoft XPS printer both use V4 printer drivers. I tried removing the Toshiba copier, but when re-adding the Toshiba copier a error message was given stating that the V4 driver could not be found. This same process was tested
on a known working computer and the printer was removed and added just find. Next I logged onto the system as the administrator and found that the XPS printer was also not working under the admin account. So I did not think this was a user
only related issue and was a system wide issue. So far my only idea is that something is missed up with the V4 driver system, but I have no idea where to start to go about fixing it. Any ideas will be helpfully.
Thanks,

Hi Harley,
If you can still reproduce this issue, can you please open a case with Microsoft Support? This isn't a behavior we're aware of, so it'd be great to figure out what's going on.
Thanks!
Justin

HP LaserJet P-1006 printer stopped printing after Windows update

One day this printer stopped printing. Items were queued, wouldn't print.
Tried changing cables.
Uninstalled and reinstalled HP software.
Ran HP Printer and Scan Doctor. Says it fixed Printer spooler error. Won't print test page. It's queued.
Ran Windows troubleshooter: Printer Spooler service isn't runng. However in Services, Printer Spooler is Started, Auto.
Installed on laptop -- printer prints fine.
I'm stumped.
Any help would be greatly appreciated.

Warbler, welcome to the forum.
It would be better if you started a thread here. You will receive more replies.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Hp photosmart C309g suddenly stopped printing

I have a wireless HP photosmart C309g installed and worked great for 2 years. Now all of a sudden there is a printer error, with no details. I have tried everything..reinstalling the driver, running diagnotics, etx. Nothing has recently changed with my computer (toshiba laptop), and all the test pages from the printer work. It is not jammed. there is some sort of connectivity problem I think but I am not sure how to correct it. I have Windows 7 32-bit. I would appreciate any help out there....Thanks so much!

noellery,
Try downloading and running the print and scan doctor located here:
http://goo.gl/Ujpib
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

8625 stopped printing after windows 8.1 update

my printer has been working without any problems until there was a windows 8.1 update on feb 11. it just stopped printing from my dell laptop. the print job appears to be added to the queue and it spools, but then nothing happens and there are no error messages. it still works from my iphone/ipad and it prints when i send a document to the printer email address. just not straight from the computer. i have updated EVERYTHING on the laptop. i have uninstalled/reinstalled the printer software several times. i have uninstalled all of the windows updates from feb 11, 2015. nothing works. i'm not super techy. i assumed a driver was missing or something wasn't compatible from the update so those are the fixes i've tried. and in the process i've messed something up so now not all links work in internet explorer. i've now been working on this since sunday. help!!!!

Hi @deannesab
I would certainly be happy to help you with your Officejet 8625. I understand you are no longer able to print since updating to Windows 8.1 and that you can still print from other devices such as your iPhone and iPad.
Please complete the solutions presented in the following document and let me know the outcome of your efforts; HP Printers - Print Jobs Disappear from the Print Queue and Do Not Print (Windows 8).
I hope this helps and look forward to hearing back from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP Laserjet P1102w just quite printing. Windows 7 64-bit OS. No changes have been made to system.

Printer just stopped printing. Jobs sit in print queue and won't print even though the printer device box says they are printing. I have tried troubleshooting the printer and all checks out OK. I have rebooted the laptop. I have uninstalled and reinstalled the printer to no avail. I have run the HP Scan doctor and everything passes....no problems. The wireless blue light is lit and the green light is flashing as it should be.

I hope you are doing well and welcome HP forums;
Try this article it should help with your issue CLICK HERE
Let me know the outcome I will do my best to asisst you further if you more assistance.
Hope this helps!
RobertoR
and remember . . .
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

HP2600n suddenly stopped printing in Windows 7 system 64-bit--wh​y? No error mes, no system changes

Similar Messages

Maybe you are looking for

HP2600n suddenly stopped printing in Windows 7 system 64-bit--why? No error mes, no system changes