Hp3050 says problem with the tricolour cartridge but wont print on black either
my hp 3050 j610 printer says problem with the tri colour cartridge justried printing in black but just sends out a blank sheet
Hi @kennym29,
Welcome to the HP Forums!
I understand that your HP 3050 will not print in black and says you have a problem with your tricolor cartridge. I am sorry to hear this, but happy to help!
I would recommend the following guides:
'Incompatible Print Cartridge' or 'Print Cartridge Problem' Message Displays on the Computer or Prin....
Fixing Print Quality Problems for the HP Deskjet 3050 (J610) All-in-One Printer Series.
Hope these guides are helpful, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!
Similar Messages
-
I have a mid 2009 macbook pro and my issue is that I installed windows 7 and when I wan to install the drivers it says " bootcamp x64 is unsupported on this computer model" I tried installing the drivers with the bootcamp 4 but it did not work either it says that i have a newer bootcamp version. I tried a few tricks but they didnot work. I hope to be helped
Welcome to Apple Support Communities
You can install a 64-bit Windows 7 or Vista version in your Mac. Make sure you downloaded these drivers > http://support.apple.com/kb/DL1630 Also, if you have the Snow Leopard DVD you used to upgrade your Mac or the OS X DVD that came with your Mac, you can use it to install the Boot Camp drivers -
Ink Cartridge problem with the 7525 all in one printer
I put all new cartridges in the 7525 all in one printer and it keeps telling me that the cyan cartridge is damaged. also the ink levels on the new cartridges are not appearing full. they are all new HP cartridges.
The troubleshooting steps in the document here may help resolve the issue with your cyan cartridge on your Photosmart 7525 printer.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
Various audio problems with the onboard speakers but not the headphones.
The little volume wheel is connected to a variable resistor, which is soldered to the motherboard via 7 pins. when the wheel loosens up, or the pins loosen up, the onboard speakers get flaky or just don't work. We've been seeing this type of problem for a while now, and just thought that the general public should know. Either replace the motherboard, or the volume controller, or wiggle and jiggle the wheel when it gives problems. good luck all, and i hope this little tid-bit helps out.
Kudos for Linux and all freeware!!Hi,
Try the following.
First, download and reinstall the Chipset driver on the following link.
Chipset Driver - Windows 8
When the reinstallation has completed, restart the notebook.
When windows has reloaded, download the IDT Audio installer on the link below and save it to your Downloads folder.
IDT Audio Installer - Windows 8.
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio through headphones.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Hi
I've got a mac pro late 2006, and i am having problem with it for quite a while now. the problem i am facing is the start up process, and the red light on the logic board. Earlier I've got the two led on the diagnostic leds 5 and 6 turned on without the diagnostic button being pressed, and i think those are related to the processors overtemp. I've managed to solve that by, removing the processors and re applying the thermal compound on the heatsink. what i have left now with is the red light on the logic board at the time i plugged in the power. At the same time when this light come on, the power indicator at the front panel come on as well. i am not sure what is this light relates to. We've replace the power supply too, and gone through the SMC reset but seems no help.
Any idea on the problem? I am desperate about it, and i will be greatful if anyone can help..
thanks and hope for your best solutions
KariI can't help directly with your problem but you might check here http://tim.id.au/laptops/apple/macpro/ for a service manual which could answer your question.
-
i have tired everything and nothing works i restored my ipod and now i cant get any of my apps back
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
My chargers little USB port probably is the fail. it lets my ipad charge only when it is completely out of power, but as soon as it turns on, it stops charging. Any tips on what i can do? The charger is new and has worked until today. i cant bring it to the store because it was bought in my neighbour country Sweden. Thanks in advance.
- Try another cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store. You can still go if your country has Genius Bars
Apple Retail Store - Genius Bar -
I have tried clearing everything, rebooting, I just do not know what this actual error is. I was on the website, went back about 30 minutes later and that message. No other websites are bringing up this error.
If FCP captures the footage then capture with FCP and import the files into Premiere. Just a few extra clicks.
Or read this:
Cannot start DV or HDV video capture in Premiere Pro CS4 or later -
When I first tried itunes with my new hard drive there was the problem with the registry keys but something also flagged up about needing a signed driver. Is this anything to do with why Itunes and my computer no longer recognises when my ipod is linked up? Whatever i try under 'devices' my ipod is never available to sync up. If anyone can help I would be most grateful.
Thanks for your reply. Unfortunately this has not worked. I didn't have quicktime to begin with so I don't know if that makes a difference? After following the instructions, I get the "registry keys missing" problem appear again (which I've subsequently fixed again) and then when I connected the ipod I got the following message - 'Device driver software was not successfully installed'.
I've tried windows update but this doesn't do anything as '...the service is not running'.
Any suggestions? -
I have problems with my new cartridge.
I have a photosmart 5510. I replaced the black cartridge by an xl size, the rest are normal size. A message appears saying that is missing a cartridge and then apears a pink square. The red, blue and pink inks are almost full. what can I do?
I tried to make work the printer with the old cartridge but doesn't work either.
Thanks.lorenaher,
This article should help out with the issue you are having. Give the steps a shot and let me know the results:
http://goo.gl/OIb47
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
Would someone be able to explain to me the following issue with Iphoto?
I ordered 8 same calendars for my soccer team and received them fine. Although a couple of pictures on it are a little off (out of focus). I need to order two more of the same calendars but when I go thru the process ireceive an error message saying:
"Unable to to assemble calendar" There is a problem with the photo with the file name "(Null)" The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your calendar.
How can I fine this "corrupt" photo? How did it go thru with the first batch of calendars but won't go thru now?
Thank you for your help.Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
My I phone 4 won't restored saying there is a problem with the iphone. Appointment made but 5 days away. can anyone help in the meantime
You need to do as provided. If no change after restoring as a new iPhone or not from the backup, the iPhone has a hardware problem.
-
I've had this for sometime and this laptop for about 1 year. Never saw this before, but haven't tryed to line up with ITunes for a while. I get a notice from windows that there is a problem with the drive and it asks it i want to fix it. Nothing happens if i try, so I have not persued that avenue. ITunes says a IPod is detected but the identification cannot be verified. Whats up with that?
ThanksHello, Wallydawg.
Thank you for visiting Apple Support Communities.
Here is an article that I would recommend going through when experiencing this error.
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Cheers,
Jason H. -
I have an iphone 4 , but it still has the ios 4 , and i want to upgrade it to a newer version , but when I try to do it via Itunes it says there's a problem with the internet (and the internet it's working fine) and it won't work ,how can i upgrade?
try rebooting your computer.
-
I'm unable to install the newest version of itunes on my pc, the promt says that there is a problem with the windows installer package, but I have downloaded the exe more than once. Is anyone able to help?
Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that.
Maybe you are looking for
-
Result of "tex" opcode is always affected by another components.
//~custom coord generating~ //and now "ft0.xy" is new coord. tex ft1 ft0.xy fs1 <2d,nearest,clamp> When I use custom coord for tex opcode, like above, that result is always affected by a value of "ft0.z" or "ft0.w" component. Is this common behavior?
-
Fle format difference between Illustrator CS2 and CS3
Does anyone know the difference between the file format of Adobe Illustrator CS2 and CS3? Is there a document that documents this? Can someone send a link? The reason I am asking is that I have written a plug-in which saves the current CS3 document b
-
CAN I PUT ALL MY FOLDERS AND INFO IN ONE MASTER FOLDER SO THAT IT'S EASY TO BACKUP PERIODICALLY?
Hello, I thought of a solution to backing my files up in a quick way instead of having to look around all over my hard drive to drag my music, photos, documents, etc into my external hard drives for backup. (which is the current method I use) Id like
-
Does Netweaver 2004 include XI,if yes, what edition of XI is it?
Dear all: I have a stupid question? Does Netweaver 2004 include XI,if yes, what edition of XI is it? Thank you very much.
-
I use firefox 3.5.7. I cant see youtube videos because firefox show me an errror that you must upgrade your flash player, I follow the link and upgrade my flash player successfully, but firefox repeat its error massage in restart. I use firefox help