Hp3070a can't connect tp-link tl-wr541g

Hi,
I would like to print from my android tablet using my hp printer.
Both the devices are connected to the access point of the tp-link.
I seem to have understood that to connect to the wireless the printer requires a device with wps technology.
I think my old access point is not equipped.
Does anyone know a way to skip this block and connect the printer to the wireless???
This question was solved.
View Solution.

Download the manual here. User Guide.
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&lc=en&product=5068754
Page 33 explains how to connect the printer with traditional wireless connection. Do not use WPS.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

Can't connect to links received in email.

Unable to connect to links received in email. Have to copy and paste the link on to the search engine.
Anyone got any ideas how to fix that?
WEN

i have the same problem. it only happened after i deleted some cookies. think i must have deleted something by mistake. What is it that allows you to connect to a link anyway?

I have airport extreme 802.11AC as a base that connect to Cable modem. How can I connect D-link DIR-655 to AE to utilize as an extender or repeat?

Hello-
I have wireless router Airport Extreme 802.11AC that connect direct to Cable modem...how can I setup the D-Link DIR-655 wireless router to AE and act as extender or repeater?. Thanks in advance.

Apple has done their best to install proprietary software in their wireless routers that is designed to only allow other Apple routers to repeat or extend the network wirelessly.
So, the chances are extremely small that a D-Link....or another other router for that matter.....could be configured to do what you ask.
There are no settings on an AirPort Extreme that would allow a D-Link device to extend the network, so all that you can do is experiment with different settings on the D-Link device to see if it might be possible for it to extend the network.
A post on a D-Link support forum might be a good idea to see if any D-Link specialists have some ideas on this topic.
Good luck.

FF4, can't connect per link click-thru, probs with hulu/utube vids, per no advert thing

I've GOT to get this fixed ASAP. Needing to make an order from website where you have to click link to get to another website to get percentage off purchases. Never had any issues with this process/website before. Not one. This started after downloading FF4. It won't let me click thru, says "Firefox can't establish a connection to the server at www..."
Also having issues with youtube and hulu. Every time I go to youtube, page says "Firefox can't establish a connection to the server at ad-g.doubleclick.net." I can still watch most of the vids. Hulu gives a similar message on many of the vids, it won't let me watch because says can't access ads. Sometimes it will still let me watch after long pause.
The first problem is most pressing, but this is all such a hassle and waste of time. Tried to download googlechrome, but FF4 won't let me! Same connection statement, "Firefox can't establish a connection to the server at www..."
Have wasted so much precious time on this. Have lost trust in and admiration for FF.

This tip is ready for consideration.
It is an update to the current tip: http://discussions.apple.com/thread.jspa?threadID=2057525
in both the Leopard and Snow Leopard Time Machine forums.
There are a number of minor wording and formatting changes.
Significant changes are:
A1. Expanded instructions for examining system.log when necessary
B5. New item explaining the new "Reuse Disk" option in Snow Leopard
C1. Reworded case-sensitive issue

HT4557 Hi, we have just purchased Apple TV and having some problems connecting to the iPad. It is asking us to 'connect to Home Sharing in iTunes' however I can't find the link/ button to press. iPad has been updated. Any help please

Hi,
We have just purchased Apple TV and can't connect to Home Sharing. We have wifi, the iPad is updated. I can't find the link on ITunes on the iPad that the tv is telling me to click. I've also tried turning it on via settings then music which seems to be connected. I can view YouTube clicks on the tv, but not an app so I can watch the footy. What am I doing wrong.
Any help would be greatly appreciated,
Thanks

Make sure your Apple TV is on the same network as your iPad. The SSID and password of router must be set in your Apple TV.
http://i1224.photobucket.com/albums/ee374/Diavonex/491f4b34c45018abef609c832b0f2 56a_zps0d1c18e7.jpg
Message was edited by: Diavonex

I have an iphone4s and it keeps telling me I can't connect to iTunes. Also if I'm on the Internet and I'm searching something and I click a link that sends me to iTunes it won't play. How do I fix this?

I can't connect to my iPhone you tube app on iPhone 4s. Also if I'm searching the Internet I can't connect to you tube if I click a search link. Can you please tell
E what to do to fix this?thanks.

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
https://support.mozilla.org/kb/Server+not+found
https://support.mozilla.org/kb/Firewalls

D-Link wireless + Cable Internet:: can't connect via AirPort

Just got my service changed from DSL to Cable and can't connect via wireless (but can with an Ethernet cable). Have tried the Wi Router settings to no avail. Any ideas? I think I might not be doing some setting in the comp correctly. Please help. Router is D-Link DIR-625.

Did you open Airport and see if you see the wireless router? If you can see it, you can select it and then make sure it is set up properly in networks in the system prefs.

Hp6700 Printer: can't connect to D-Link DI-514 Wireless Router when Broadcast SSID is set to NO.

HP6700 Printer: can't connect to D-Link DI-514 Wireless Router when Router Broadcast SSID is set to NO. My MAC LapTop and HP LapTop both work with the SSID set to NO. If I change the Wireless Router to Broadcast SSID is YES, then the HP6700 Printer can connect to the Wireless Router. I setup the Printer telling it what the SSID and Password were, the same as both of my LapTops, but it never connects, unless I change the Router to broadcast the SSID. Help!
This question was solved.
View Solution.

Did you try updating the firmware on the DI-514?
You can also try setting a static IP on the printer, then assign the printer to the static DHCP list in the router interface.
To give your printer a static IP address:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway.
- Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS. This is Google DNS. You can choose another external DNS if you wish.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you will have delete and re-add the printer on your Mac.
Show support by clicking the blue Kudos star in the post that resolved your problem. Doing so will help other forum members find their solutions too.

Can't connect wirelessly to D-Link Router?!

I'm using an iBook G4 with Airport Extreme, and I can't connect to my home wireless D-Link Router. It's WPA encrypted, but I'm using the proper key.
When I boot up the laptop, I can find a strong signal- it sees it, but when I pull up Safari, Firefox, or iChat, it says I'm not connect to the internet.
Any suggestions, or need more info?

Did you already try using the troubleshoot button on the error page?
Also, make sure that both the network name (SSID) and the WPA password are correct (and choose 'WPA Personal' as security type).
Here's some additional info from Apple : http://docs.info.apple.com/article.html?artnum=107921
You could also check if the signal you are receiving does indeed come from your router and not from your neighbours'...(click on the airport icon to see the list of 'available' networks)
iBook G4 Mac OS X (10.4.7)

Powerbook & iBook can't connect simultaeneously with D-link 300-t modem

Please help
After much pulling of hair I finaly got my G4 Powerbook to connect to the internet via my airport express through a d-link 300-t modem. This I achieved by changing the default ip address of the modem from 192.168.1.1 to 192.168.1.234 and configuring the airport express manually to be 192.168.1.233.
My problem is that my son now has an iBook which he can connect to the internet through the same modem, but we can't connect at the same time. I keep getting the message " 81.178.76.171 in use by 00:11:24:24:25:7d,DHCP Server 192.168.1.234" ( modem ip). Both machines configure IPv4 using DHCP.
I don't want to configure his iBook manually if I don't have to as he doesn't live here and I don't want to muck up his settings for other places he may wish to use it.
Any thoughts would be greatly appreciated
David Moore

Is the Airport Express distributing IP addresses?
Probably no
You can set up a new location on his iBook which will not conflict or change his current settings.
iFelix

I can't link my iPhone 4S to my iPad air. I can't connect to a personal hotspot or Bluetooth link them! Any ideas?

I can't link my iPhone 4S to my iPad air. I can't connect to a personal hotspot or Bluetooth link them! Any ideas?
In settings under mobile (cellular) I've turned on mobile data, 3G and data roaming.
Under mobile (cellular) data network APN details are filled in and I have tried reset settings all ready.
What I'd like to do is link the two devices so I can use my phone's 3G on my iPad.
I can't get either device to connect via Bluetooth with each other!
Any help would be greatly appreciated!

Hello Hollystorm1
Check out the article below to setup your personal hotspot on your iPhone. Check with your carrier to ensure that is a feature that you can do with your iPhone.
iOS: Understanding Personal Hotspot
http://support.apple.com/kb/ht4517
Regards,
-Norm G.

How can i connect my bookmarks links from Firefox, to favorites (location) start button then favorites?

''dupe of https://support.mozilla.org/en-US/questions/915455''
How can i connect my bookmarks links from Firefox, to favorites (location) start button then favorites?

*Plain old favorites: https://addons.mozilla.org/firefox/addon/plainoldfavorites/

Why I can not connect ipad2 and iphone5 to wifi by using d-link modle? but my computer and iphone3 can do it.

why I can not connect ipad2 and iphone5 to wifi by using d-link modle? but my computer and iphone3g can do it.

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

TS1363 I can't connect to the itunes store from my Windows Vista PC. I have run diagnostics and itunes have verified my internet connection as positive, but not the secure link to the itunes store. This comes up as failed. Any suggestions?

I can't connect to the itunes store from my Windows Vista PC. I have run diagnostics and itunes have verified my internet connection as positive, but not the secure link to the itunes store. This comes up as failed. Any suggestions?

everytime I try to open the store it endlessly says "accessing iTunes store" but it never opens.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

ICal was linked to a Google account I canceled. When I open iCal, a message says iCal can't connect to the account server. Clicking OK repeats the message. Clicking OK, iCal quits. How can I eliminate the problem server?

iCal was linked to a gmail account I canceled. When I open iCal, a message says iCal can't connect to the gmail account server. Clicking OK repeats the message. Clicking OK again causes iCal to quit. There is no opportunity to delete the link. How can I eliminate the problem server or otherwise get iCal working again? (OS 10.6.8)

The easiest way to fix the hosts file is to restore it from a backup that predates the modification, or to copy the unmodified file from another Mac. If you can't do that, then do as below.
Triple-click anywhere in the line below on this page to select it:
open -e /etc/hosts
Copy the selected text to the Clipboard by pressing the key combination command-C.
Paste into a Terminal window by pressing command-V. A TextEdit window should open. At the top of the window, you should see this:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1                              localhost
255.255.255.255          broadcasthost
::1                                        localhost
Below that, you may see some other lines. The first 9 lines should be exactly as above, apart from differences in the blank space within lines. Otherwise you can't use this procedure—STOP and ask for guidance.
If the contents of the TextEdit window are as described, close it, then enter the following command in the Terminal window in the same way as before (by copy and paste):
sudo sed -i~ '10,$d' /etc/hosts
You may be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning to be careful. Confirm. Quit Terminal.
If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Log in as one and start over.
That will fix the hosts file. There is now a copy of the old hosts file with the name "hosts~" in the same folder as "hosts". You can delete the copy if you wish. Don't delete the file named "hosts".

Hp3070a can't connect tp-link tl-wr541g

Similar Messages

Maybe you are looking for