Hp3070a not wireless printing with windows 8

Help! Going mad! My printer use to print wirelessly and then stopped. I reset once by looking on google but now don;t know what to do. I have Surface tablet with windows 8 (i think!). Prints with USB fine. Thank you so much. Ruth

Hi ruthk726,
I'd like to help you get the printer working wirelessly again with your tablet.
Use the solutions in 'Printer is offline' Message Displays on the Computer and the Printer Will Not Print. This document does address these other symptoms as well:
Printer won't print
Print jobs are stuck in the print queue
No response from the printer
Please Note: Solution one will advise you to download and install the HP Print and Scan Doctor; however, the HP Print and Scan Doctor does not support Windows RT for ARM-processor based tablets or computers. Please proceed to the next solution. (Solution two: Restart the computer and check the print queue)
Your post signature states > Posted from Microsoft Windows RT Tablet
Thank you for joining the HP Forums, please let me know if you require any additional assistance.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Similar Messages

HP LaserJet M1120 MFP will not print on wireless network with Windows 8.1 operating system

The printer worked on the wireless network with Windows 8.
I have been advised that it does not work with windows 8.1 because a driver is required. However this is not available to download.
It is ridiculous that by having the latest operating system I am unable to use the HP printer on the wireless network
When will HP have the driver to download?

Check the support site here.
http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/HP-LaserJet-M1120-MFP-will-not-prin...
Make sure you have the firmware update also.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

I have an airport extreme. i am trying to connect a laptop with windows 7 to a wireless printer, with no luck. any ideas?

I have an airport extreme. i am trying to connect a laptop with windows 7 to a wireless printer, with no luck. any ideas?

The problem is not the router.. the issue is the vpn has put your computer in a different IP range with a different gateway. When you turn off the vpn the computer returns to local lan and can print.
Some vpn software allows you to set gateway to use local net instead of remote gateway or access to other webistes or local lan.
Read up the issue.
http://stevejenkins.com/blog/2010/01/using-the-local-default-gateway-with-a-wind ows-vpn-connection/
Cisco vpn client..
https://supportforums.cisco.com/thread/239113
I did not search much.. just grabbed the first article I could find that explains the issue.
The whole point of the vpn is whilst it is connected your computer is NOT part of the Local Lan .. it is part of the Remote LAN via the vpn tunnel.
It is also a security risk using split tunnelling so often it will not be allowed.
Plug the printer directly into the computer via usb or whatever.. Local connection will work.. not local lan.

Can't use my HP Deskjet F4580 Wireless Printer with the AirPort Extreme Base. The printer is NOT connected at the USB port of the AirPort Extreme, and is placed in another room. It worked just fine with my previous router (Linksys WRT54G). Help me!

Hey Guys!
I just got my AirPort Extreme Base, but I can't use my HP Deskjet F4580 wireless printer with it.
The printer is not connected to the AirPort Extreme's USB port. It is placed in another room, and I'd like to use it (the printer) wirelessly (not connected to the USB port os the AirPort Extreme), as I used to. There is no place for the printer close the AirPort Extreme. It worked just fine with my previous wireless router (Linksys WRT54G). I'm very disappointed with the AirPort Extreme Base Station because of that!...
Can you help me? Please?!
Thanks Folks!

This must be a tough one, no suggestions at all.

Why won't my printer print with Windows 8?

Why won’t my printer print with Windows 8?
Have you just upgraded, or purchased a new computer with Windows 8, and now you can’t get your printer to work? If so, this may help you. A lot of people have questions about installing their printer on a new OS. This will help you answer those questions and make sure that you get everything installed.
Before You Start
Before you try to install the printer on a Windows 8 computer, you should check to make sure the printer is compatible with the new OS. The link below will give you a list of the printers that will work in Windows 8.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03168175&lc=en&cc=us&destPage=document&dlc=en
If you have upgraded your computer to Windows 8 form another version of Windows, make sure to completely uninstall all of the software for your printer. It should still print, but to use all the functions you will need to reinstall the software, if it’s available.
Another thing to consider is how you want to connect the printer to the computer.
USB. You should make sure that you have a USB cable that is no longer than 6 ft. (roughly 2m). Make sure to connect the printer directly to the computer. Do not use a USB hub.
Ethernet cable. Make sure you have the network setup, that you have a free cable port on the router, and that you have an Ethernet cable available.
Wireless. You should make sure that you have the wireless network setup, and that you have the password for the wireless network.
1.     Installing Via USB
Installing via USB in Windows 8 has become much simpler for HP printer users. In other versions of the Windows OS you had to start the installation and wait for it to ask you for the USB connection. If you didn’t, you would have to uninstall the printer from the Printers/Devices folder, and then start the install. In Windows 8, that will not be a problem. If you plug the printer’s USB cable in and then install the printer’s software, it will still work. Now for in depth instructions on installing the printer via USB click the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03460670&tmp_task=solveCategory&cc=us&dlc=en&la...
2.     Installing Via an Ethernet Network Connection
For an Ethernet network connected printer the install is amazingly simple. All you have to do is connect the printer to the network. Once you have that done, Windows 8 will automatically install the drivers for you. Then, all you have to do is install the rest of the software, if it’s available. It’s really that easy.
http://www8.hp.com/us/en/support-drivers.html
3.     Installing Via a Wireless Network Connection.
For a wireless network connected printer the install is amazingly simple as well. All you have to do is connect the printer to the network. Once you have that done, Windows 8 will automatically install the drivers for you. Then, all you have to do is install the rest of the software, if it’s available. It’s pretty much the same as an Ethernet install, just wireless.
http://www8.hp.com/us/en/support-drivers.html
Alternate Install Methods
With Windows 8, many printers’ drivers are installed with the OS. These are known as InOS drivers, since they come built into the operating system. If you have one of those printers, all you should have to do is connect it to the computer via USB, or connect it to the network via Ethernet or wireless. Once you have that done Windows will handle the rest. There are alternate methods of installing your printer if the normal methods are not working for some reason. You can install the printer either using the Printer Install Wizard, or through Windows Updates.
Printer Install Wizard:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02681060&tmp_task=solveCategory&cc=us&dlc=en&la...
Windows Update:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03460648&tmp_task=solveCategory&cc=us&dlc=en&la...
Note: The Laserjet drivers for the Asia-Pacific and Japan won’t be released until a later date. Check the support site linked below for driver availability. I will update this post once they become available.
http://www8.hp.com/us/en/support-drivers.html
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
This question was solved.
View Solution.

Hope this answers some questions.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Wireless Printing with PowerBook G4 17"

We have two PowerBook 17" G4s. We bought an HP 1320 LaserJet which works fine when cable-connected, but we want to set up for wireless printing to maximize our flexibility in computing and minimize wear-and-tear on the cable connections on our computers.
We have recently learned from HP that they don't support Macs for wireless printing with this printer (although they do support Windows with it for wireless printing)
Can anyone recommend a reliable, good-quality B&W laser jet type printer which is capable of wireless connections with Apple PowerBooks? We are set up for DSL using LinkSys modem, and LinkSys has been no help in this matter. Thanks for any help or advice ...

If it's an ethernet printer then you should be able to plug it into a wireless router and print from the mac over the network. All you should need to do is to enter the printer's ip address when setting it up on the mac and it should just work - OSX has the ppd files built in for most laserjets.
If not ethernet, then you have to find a usb to wireless adapter - they do exist, and then the printer will act much like any other network device. Linksys make a wireless usb print server. Try a google search for "54g usb adapter" but make sure anything you buy will work on a printer - ie pick up an ip address from the router.
Bear in mind, that if it starts to get pricey to do this, it might be more cost effective to switch to an ethernet enabled laser printer which will work seamlessly. I recently picked up a Dell 3100cn which is really very good - if big, but the output is excellent quality and it was better value to get a new printer than get the bits to make my current printer wireless and replace the toner. Just a thought. Apparently the Dell refurb shop is very good and quite cheap.
Good luck.
PS - Wireless routers are really quite cheap, Belkin, Netgear and Linksys are fairly inexpensive - I found circuit city to be quite good.

HP Laserjet p2015d auto duplex printing with Windows 7 64 bit operating system

I have used the HP Laserjet p2015d with Windows 7 32 bit operating system and have been able to use the AUTOMATIC DUPLEX feature of the printer without problems.
Now, however, I have installed the 64 bit version of Windows 7 operating system and the AUTO DUPLEX does not work and is not shown as being available on the PROPERTIES menu of the printer.
Is it possible to use the AUTO DUPLEX feature of the printer with Windows 7 64 bit operating system.
All replies welcomed! Aaron in Calif.

Hi Aaron,
Make sure the Automatic Duplexing option is enabled:
Enter Control Panel > Devices and Printers.
Right click the printer icon, then click Printer Properties.
Click the Device Settings tab.
Set the Automatic Two-Sided Duplex Accessory as installed and click OK to save the change.
Now Automatic Duplexing should become available.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Can't print to HP LaserJet Prof. P1102w_1 wireless printer with my iPad.

I cannot print to HP LaserJet Prof. P1102w_1 wireless printer with my iPad although it appears that this is a compatible printer. My computer prints to this printer. All other components of my wireless options and router are working.

Hi,
Did you updated the printer firmware?
The P1102w only support AirPrint with the latest firmware, not with the version shipped with the device.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03128524&cc=us&dlc=en&lc=en &product=4110396&tmp_track_link=ot_search
If you have any issues after updating the device please clarify your router brand and model.

How can I get wireless printing with my ipad?

How can I get wireless printing with my ipad?

Best way is to use an AirPrint compatible printer:
http://support.apple.com/kb/HT4356
If your printer is not AirPrint compatible, you might want to take a look at Printopia.
http://www.ecamm.com/mac/printopia/

How to print with a wireless printer with airport extreme

how to print with a wireless printer with airport extreme

The problem is not the router.. the issue is the vpn has put your computer in a different IP range with a different gateway. When you turn off the vpn the computer returns to local lan and can print.
Some vpn software allows you to set gateway to use local net instead of remote gateway or access to other webistes or local lan.
Read up the issue.
http://stevejenkins.com/blog/2010/01/using-the-local-default-gateway-with-a-wind ows-vpn-connection/
Cisco vpn client..
https://supportforums.cisco.com/thread/239113
I did not search much.. just grabbed the first article I could find that explains the issue.
The whole point of the vpn is whilst it is connected your computer is NOT part of the Local Lan .. it is part of the Remote LAN via the vpn tunnel.
It is also a security risk using split tunnelling so often it will not be allowed.
Plug the printer directly into the computer via usb or whatever.. Local connection will work.. not local lan.

Deskjet F4100 printer with Windows 7

I need an update to operate a deskjet F4100 printer with Windows 7

honyok,
That is a simple question, and easy to solve. Here is the link to that series.
http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&taskId=135&prodTypeId...
1) Select the exact model
2) Select the exact OS
3) Download a) full feature software, updates, utilities
4) Burn all downloads to a CD.
Disconnect the power and USB cable. Install the full feature software, following the instructions.
The updates and utilities can be useful after the initial install.
I have the F4135, and needed the scan update.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

I want to use my jetpack 890L as a wireless router to allow wireless printing with a canon laser printer. Is this possible, and does the jetpack support WPS?

I want to use my jetpack 890L as a wireless router to enable wireless printing with a canon laser printer. Is this possible, and does the jetpack support WPS?

I’ve used several wireless printers with a 4510 and 5510 Jetpack and they all print just fine. The MHS890L does not support WPS. The WPS Wikipedia article briefly addresses the reason why you should not use WPS. If you’re having trouble setting up your printer the manufacturer has a toll free support line to help you. Your Jetpack has the Wi-Fi Password on the bottom, under the battery, and or in the LED display.

How can i install hp laserjet 1010 printer with windows 10 pro

HelloI am finding problem with installing hp printer laser jet 1010 with windows 10 pro. Is there any solution to this so i my use my 1010 printer with latest windiws 10 pro.RegardsArshad Janjua

That particular printer is shown by the Windows 7 hardware compatibility website to not be compatible with Windows 7.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Can I get an older release of Firefox? 36.0 does not play well with Windows 7.

Firefox 36.0.4 does not play well with Windows 7. If it opens at all, it freezes within a minute so the screen goes pale and I get the classic spinning circle of death. Then the header says (not responding).
Ideally I would like to drop back to version 32 or 33, but 34 and 35 had fewer problems.
Can I find older versions anywhere?

You can [[Install an older version of Firefox]] any time. But which will cause significant security risk. So If you can't use the latest version of Firefox, we recommend that you use the latest version of another browser.
If the latest version of Firefox is causing problems for you or you just don't like something about it, please give us feedback about it here:
[https://input.mozilla.org/en-US/feedback/ Submit your feedback and suggestions about Firefox]
Anyway head for the ftp for older version but please be careful with these: ftp://ftp.eu.mozilla.org/pub/firefox/releases/

Verizon Media Manager will not start automatically with Windows, even though it is set to do so.

Verizon Media Manager will not start automatically with Windows, even though it is set to do so. This started with the latest update. I see that the desktop icon for Media Manager now has a security shield on it, and it requires UAC confirmation when you start it, which I don't remember the old version doing.
One thing I noticed, msconfig.exe shows that "C:\Program Files\Verizon\McciTrayApp.exe" is set to start at Windows startup, but the desktop icon used to start Media Manager manually has a target of ""C:\Program Files\Verizon\Verizon Media Manager\Release\Verizon Media Manager.exe" Verizon Media Manager".
I don't remember what the previous version was, but this one is 9.4.86. It asked me if I wanted to update it a few days ago, and I said yes.
I am running Windows 7 Home Premium.
Solved!
Go to Solution.

Try setting the startup option to off and then to on again. It looks to be pointing to a wrong location.
Attached is a partial screen shot of my msconfig setting.
Attachments:
media manager startup cmd line.jpg ‏18 KB

Hp3070a not wireless printing with windows 8

Similar Messages

Maybe you are looking for