Hp3400 keeps crashing with blue screen with clean windows 7 64

Hi,
A brand new hp3400 mt (with product number LH121EA#ABU) crashed during the initial setup process for win 7. Eventually I could boot to windows, but then it kept crashing. Since then, I have reformatted and reinstalled win 7 64, and downloaded and installed some drivers from your support site for all relevant hardware (I think), but not software.
I ran memtest on the ram and it is fine.
I can now boot to windows (although it took a number of runs through the installation process, with crashes occurring intermitently). I can navigate for a while, then things hang up (e.g. clicking Device Manager in Control Panel takes 4 - 5 minutes to open, if at all). The crashes occur randomly, e.g. when browsing the web or installing an update. After restart the crash recovery notification reports errors with BC Codes of 1a or 50 (if that's any use).
Please help! I'm at the limit of my knowledge now!

In that case you need to check with the Memory (RAM) and the Hard Disk Drive.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
Regards;
Ray
I am an HP employee
Please click the White Kudos star to say thanks for helping.
Please mark Accept As Solution if my help has solved your problem.

Similar Messages

Keep crashing to blue screen, have gotten a number of errors

So, for a few days now I keep crashing to blue screen. This happens most when I'm playing a game and as I've searched the internet for a solution I have discovered the the general agreed upon idea for my error is to do with video card drivers. Anyway, the
most prominent error that I have received is SYSTEM_SERVICE_EXCEPTION with a stop code of 0x0000003b, but I have also gotten memory management errors and one
IRQL_NOT_LESS_OR_EQUAL error. I've have tried reinstalling my nvidia drivers to no avail, updated window to the most recent update and checked for new drivers on all of my stuff. I also want to mention I ran a sfc scan and here are the results http://pastebin.com/u3aQQyMc
. Would really appreciate any help on this, has been really disruptive. Thanks.

Hi tmaaitah,
If any further help needed, please feel free to let us know.
In addition, please mark the proper answer for the others who will read this thread.
Thank you for your understanding and support.
Best regards
Michael Shao
TechNet Community Support

My ipnone 5s keeps crashing and blue screening any advice

My ipnone 5s keeps crashing and blue screening any advice

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Why does my computer crash to blue screen with message when Photoshop is open?

This happened 3-4 times when I was using the trial version and I wasn't sure which program from the trials that was doing it, but it started after I downloaded and used the Adobe Clound trials so I stopped using them. Eventually I went ahead and upgraded to the subcription and have been using Illustrator and Muse for a few days now and have not had a problem until today. I had Photoshop open and minimized, as well as Illustrator, and walked away from my desk. When I returned, the screen was blue with the Windows "shut down to prevent further damage" screen. I have a photo of the message. I realized that I had been using Photoshop the last few times this happened also. It never happened before I tried this software and stopped when I stopped using the trial.
I contacted support and chose to have someone call me back due to the wait. 15 minutes later, I got a call back from India and exlplained this. He got my phone number and asked me to hold while he got someone to help me. ONE HOUR AND 20 MINUTES later someone from India came on and I explained it all over again. He said he was going to check into it and 5 minutes later I was DISCONNECTED. No one called back and there is no option for Adobe, but to call back and start the process ALL OVER AGAIN. From what I see in these forums, it happens all the time and is serious problem with Adobe.I would never do business with a company with this type of horrible support and don't think I will continue my subscription with them. I am a graphic designer and do not have the time for computer crashes and support that does not care.

Thanks, Bill. Your response has been the most helpful. I have not yet tried the steps in your articles, but have a little more info that may help narrow it down. However, it has not happened for a couple weeks. I run a large CAD progam that also has never caused this issue.
The blue death screen occurs only when PS is open and when the computer goes to the screen saver. When I wake my screen this message is there:
"A problem has been detected an windows has been shut down to prevent further damage to your computer.
The problem seems to be caused by the following file: win32k.sys
PAGE-FAULT-IN-NONPAGED-AREA
If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to make sure any new hardware or software is properly installed. I this is a new installation, ask you hardware of software manufacturer fo any windows updates you might need.
If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable such components, restart your computer, press F8 to select Advanced startup options, and then select safe mode.
Technical Information:
*** STOP: 0x00000050 (0xE57C1304, 0x00000000, 0xBF8892C3, 0X00000001)
*** win32k.sys - Addre4ss BF8892C3 base at BF800000, DateStamp 4ff2f633"
Beginning dump, blah blah blah.
After this happenend 2-3 time after installing the PS trial, it was obvious that it was the only software change I had made. I stopped using it and went back to using my PS4 and the blue screen never happened again...until I purchase my subscription and used it again. I don't know if any of this helps narrow down what I can test, but you have given me the most knowledgeable feedback. Thanks again.

Mac OSX 10.6.7 boot very slow with blue screen after clean reinstall ...

... with the following log:
6/12/11 6:10:18 PM          com.apple.launchd[1]          *** launchd[1] has started up. ***
6/12/11 6:12:07 PM          com.apple.launchd[1]          (com.apple.xprotectupdater[14]) Exited with exit code: 255
6/12/11 6:14:00 PM          com.apple.launchd.peruser.501[105]          (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
6/12/11 6:14:26 PM          com.apple.launchd.peruser.501[105]          (com.apple.Kerberos.renew.plist[122]) Exited with exit code: 1
6/12/11 6:14:38 PM          com.apple.WindowServer[88]          Sun Jun 12 18:14:38 idas-MacBook-Pro.local WindowServer[88] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Can anyone help to solve this problem?

If you see a blue screen at startup
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8963.html

Equium M37-337 keeps crashing and blue screen list the fault as - igxprd32

Hi,
The laptop model number is Equium M37-337 PSM77E-00L00MAV
from looking through the web I see this is a graphics issue.
When starting the laptop it will go int Windows and then crash with a blue screen listing the above. This lasts only about half a second and then machine just goes to a black screen and nothing else.
I am able to turn the laptop off by holding down the power button for several seconds. When I try and restart it returns to the black screen state.
If I leave the laptop off for somre time (say 30 minutes) it reverts back to the startup to the Windows and then bluescreen black screen sequence.
I have tried booting to windows safe mode but a similar crash occurs (although sometimes this is just the machine locking up with some thin black lines across the display.
Is the on board graphics 'card' broken? Is this a common problem with this model? Is this economically fixable?
Thanks
Chris

Hi,
What I would recommend doing first would be to do a product recovery on the machine. Baring in mind that any data you have on the notebook will be lost by doing this; it is imperitave you back up your data first before going ahead with that.
The reason I am saying you should do that first is if the repair do see this as a software issue, and should you have any extended warranties on the notebook, you would be charged (although this may be the case anyway). Also, baring in mind that if the product recovery does solve the problem then you could save yourself a whole lot of time with waiting for repairs.
As far as I am aware there is no known issues with this machine where the graphics are concerned, and it's not something I have heard of with that model. As far as the repair being economical, I would first have a quote on the laptop. I know that would cost ?£35 but if the repair cost is within your budget and cheaper than a new unit then that'll be better for you.
Unfortunately there is no way of finding out what the cost of the repair will be, as the repairs are done at a specalist repair centre, which is far from here. You'll have to have that sent in first for a quote before you'll know.
I hope that helps,
Regards,
Nukey
Edited by: ADMIN on 27-Apr-2008 07:50

Windows 8.1 Keeps crashing! Blue screens and I don't know why.

My computer is crashing randomly. Happens once every few days or so. It started happening when I installed a new fan and heatsink. My cpu never goes over 50 C now so I don't know why it is crashing. Here is the dump file. Please help me :/
Microsoft (R) Windows Debugger Version 6.3.9600.17298 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\MEMORY.DMP]
Kernel Bitmap Dump File: Only kernel address space is available
************* Symbol Path validation summary **************
Response                         Time (ms)     Location
Deferred                                       SRV*C:\Windows\symbol_cache*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*C:\Windows\symbol_cache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (6 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.17328.amd64fre.winblue_r3.140827-1500
Machine Name:
Kernel base = 0xfffff803`7a47e000 PsLoadedModuleList = 0xfffff803`7a754370
Debug session time: Tue Nov 25 22:05:18.738 2014 (UTC - 5:00)
System Uptime: 2 days 9:06:56.454
Loading Kernel Symbols
Loading User Symbols
PEB is paged out (Peb.Ldr = 00000000`7ffdf018). Type ".hh dbgerr001" for details
Loading unloaded module list
*                        Bugcheck Analysis
Use !analyze -v to get detailed debugging information.
BugCheck 3B, {c0000005, fffff8037a52cba4, ffffd000220ab340, 0}
Probably caused by : win32k.sys ( win32k!SEMOBJ::vUnlock+2c )
Followup: MachineOwner
4: kd> !analyze -v
*                        Bugcheck Analysis
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff8037a52cba4, Address of the instruction which caused the bugcheck
Arg3: ffffd000220ab340, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
Debugging Details:
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
nt!KxWaitForLockOwnerShipWithIrql+14
fffff803`7a52cba4 48890a          mov     qword ptr [rdx],rcx
CONTEXT: ffffd000220ab340 -- (.cxr 0xffffd000220ab340;r)
rax=0000000000000000 rbx=0000000000000000 rcx=ffffd000220abdf0
rdx=8848800000000000 rsi=0000000000000000 rdi=ffffd000220abdf0
rip=fffff8037a52cba4 rsp=ffffd000220abd70 rbp=ffffd000220abea0
r8=ffffd000220abef0 r9=ffffe000da69ddb0 r10=ffffd000220abf80
r11=fffff90145b03ce0 r12=fffff90140ad53f8 r13=fffff90140a00830
r14=0000000000000000 r15=ffffe000d889d880
iopl=0         nv up di pl zr na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b             efl=00010046
nt!KxWaitForLockOwnerShipWithIrql+0x14:
fffff803`7a52cba4 48890a          mov     qword ptr [rdx],rcx ds:002b:88488000`00000000=????????????????
Last set context:
rax=0000000000000000 rbx=0000000000000000 rcx=ffffd000220abdf0
rdx=8848800000000000 rsi=0000000000000000 rdi=ffffd000220abdf0
rip=fffff8037a52cba4 rsp=ffffd000220abd70 rbp=ffffd000220abea0
r8=ffffd000220abef0 r9=ffffe000da69ddb0 r10=ffffd000220abf80
r11=fffff90145b03ce0 r12=fffff90140ad53f8 r13=fffff90140a00830
r14=0000000000000000 r15=ffffe000d889d880
iopl=0         nv up di pl zr na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b             efl=00010046
nt!KxWaitForLockOwnerShipWithIrql+0x14:
fffff803`7a52cba4 48890a          mov     qword ptr [rdx],rcx ds:002b:88488000`00000000=????????????????
Resetting default scope
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: 0x3B
PROCESS_NAME: AI Suite II.ex
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) amd64fre
LAST_CONTROL_TRANSFER: from fffff8037a4d9f8c to fffff8037a52cba4
STACK_TEXT:
ffffd000`220abd70 fffff803`7a4d9f8c : ffffe000`da69ddb0 00000000`0000001e 00000000`00000000 ffffe000`db793c30 : nt!KxWaitForLockOwnerShipWithIrql+0x14
ffffd000`220abda0 fffff803`7a4d93c2 : 00000000`00000000 fffff960`002172ec ffffd000`220ac002 fffff901`44ffe620 : nt!ExpReleaseResourceForThreadLite+0x64c
ffffd000`220abee0 fffff960`001da2cc : 00000000`00000000 fffff960`001a7ef2 0000207f`e204207f 00000000`00000001 : nt!ExReleaseResourceAndLeaveCriticalRegion+0x12
ffffd000`220abf10 fffff960`001d51a3 : fffff901`451e4ac0 ffffd000`220abfa0 00000000`00000000 fffff901`40ad53f8 : win32k!SEMOBJ::vUnlock+0x2c
ffffd000`220abf50 fffff960`001e49ad : 00000000`0000163c fffff901`44ffe620 00000000`00000000 ffffe000`da69ddb0 : win32k!GreSelectVisRgnInternal+0x173
ffffd000`220abfd0 fffff960`001ac21b : ffffffff`e204207f fffff901`00000d3a 00000000`00000001 ffffe000`da69ddb0 : win32k!ResetOrg+0x50d
ffffd000`220ac100 fffff960`001e5a5d : ffffffff`e204207f fffff901`452e23e0 ffffd000`220acb00 ffff6b78`f79a9a37 : win32k!UserSetDCVisRgn+0x17b
ffffd000`220ac140 fffff960`001ed3a4 : fffff901`40a58990 00000000`00000000 fffff901`40a58990 00000000`02000705 : win32k!zzzLockDisplayAreaAndInvalidateDCCache+0x14d
ffffd000`220ac1a0 fffff960`003149cf : ffffe000`db7b2ba0 fffff901`428f7a80 00000000`00000000 fffff901`40b00ff0 : win32k!xxxCreateWindowEx+0x1824
ffffd000`220ac4b0 fffff960`001ed82a : fffff901`428f7d28 00000000`00000000 00000000`00000000 ffffe000`db7b2ba0 : win32k!xxxCreateDefaultImeWindow+0x19b
ffffd000`220ac5b0 fffff960`001d6ab5 : 00000000`00000000 00000000`00000000 e000d889`78747355 fffff803`7a4d7bc8 : win32k!xxxCreateWindowEx+0x1caa
ffffd000`220ac8c0 fffff803`7a5d89b3 : 00000000`00000000 ffffd000`220ac940 ffffd000`220ac958 ffffd000`220ac968 : win32k!NtUserCreateWindowEx+0x4d2
ffffd000`220aca10 00000000`777f611a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`0abbe758 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x777f611a
FOLLOWUP_IP:
win32k!SEMOBJ::vUnlock+2c
fffff960`001da2cc ff158e023100    call    qword ptr [win32k!_imp_PsLeavePriorityRegion (fffff960`004ea560)]
SYMBOL_STACK_INDEX: 3
SYMBOL_NAME: win32k!SEMOBJ::vUnlock+2c
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: win32k
IMAGE_NAME: win32k.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 54335e2a
IMAGE_VERSION: 6.3.9600.17393
STACK_COMMAND: .cxr 0xffffd000220ab340 ; kb
BUCKET_ID_FUNC_OFFSET: 2c
FAILURE_BUCKET_ID: 0x3B_win32k!SEMOBJ::vUnlock
BUCKET_ID: 0x3B_win32k!SEMOBJ::vUnlock
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x3b_win32k!semobj::vunlock
FAILURE_ID_HASH: {ec837e9a-fa14-dd77-d99c-f14b9fe89bf2}
Followup: MachineOwner

Hi,
In order to assist you, we will need the .DMP files to analyze what exactly occurred at the time of the crash, etc.
If you don't know where .DMP files are located, here's how to get to them:
1. Navigate to the %systemroot%\Minidump folder.
-- %systemroot% is the environment variable for your Windows directory. For example, C:\Windows.
2. Copy any and all .DMP files in the Minidump folder to your Desktop, create a new folder on the Desktop to put these .DMP files in, and then zip the folder. You can then either use a 3rd party tool such as 7-Zip/Winrar, or you can use Windows'
default method of zipping folders.
Compress and uncompress files (zip files).
Please note that any "cleaner" programs such as TuneUpUtilities, CCleaner, etc, by default will delete .DMP files upon use. With this said, if you've run such software, and your Minidump folder is empty, you will need
to allow the system to crash once again to generate a crash dump.
3. Upload the .ZIP containing the .DMP files to Onedrive or a hosting site of your choice and paste in your reply.
Preferred sites: Onedrive, Mediafire, Dropbox, etc. Nothing with wait-timers, download managers, etc.
4 (optional): The type of .DMP files located in the Minidump folder are known as Small Memory Dumps. In %systemroot% there will be what is known as a Kernel Memory Dump (if your system is set to generate). It is labeled MEMORY.DMP. The difference
between Small Memory Dumps and Kernel Memory Dumps in the simplest definition is a Kernel Memory Dump contains
much more information at the time of the crash, therefore allowing further debugging of your issue. If your upload speed permits it, and you aren't going against any strict bandwidth and/or usage caps, etc, the Kernel Memory Dump is
the best choice. Do note that Kernel Memory Dumps are much larger
in size due to containing much more info, which is why I mentioned upload speed, etc.
If you are going to use Onedrive but don't know how to upload to it, please visit the following:
Upload photos and files to Onedrive.
After doing that, to learn how to share the link to the file if you are unaware, please visit the following link -
Share files and folders and change permissions and view 'Get a link'.
If your computer is not generating .DMP files, please do the following:
1. Start > type %systemroot% which should show the Windows folder, click on it. Once inside that folder, ensure there is a Minidump folder created. If not, CTRL-SHIFT-N to make a New Folder and name it Minidump.
2. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Performance > Settings > Advanced > Ensure there's a check-mark for 'Automatically manage paging file size for
all drives'.
3. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Startup and Recovery > Settings > System Failure > ensure there is a check mark next to 'Write an event to the
system log'.
Ensure Small Memory Dump is selected and ensure the path is %systemroot%\Minidump.
4. Double check that the WERS is ENABLED:
Start > Search > type services.msc > Under the name tab, find Windows Error Reporting Service > If the status of the service is not Started then right click it and select Start. Also ensure that under Startup Type it is set to Automatic rather than
Manual. You can do this by right clicking it, selecting properties, and under General selecting startup type to 'Automatic', and then click Apply.
If you cannot get into normal mode to do any of this, please do this via Safe Mode.
Regards,
Patrick
“Be kind whenever possible. It is always possible.” - Dalai Lama

My iPad air either keeps crashing with blue screen or reboots it self. Other times it just locks up. It does not seem to matter what program or process I am doing.

My iPad air either keeps crashing, gets blue screen or reboots itself. It does not seem to matter which program I am using or process I am involved with. Never had this program with my 3. I have the latest software loaded. Any help would be appreciated.

See this thread....
Ipad air low memory crash: Apple Support Communities

IPhone5s stuck in recovery mode after lots of times displaying blue screen of death, cannot restore it as iTunes displays error 14 on verification, same time phone crashes again with blue screen.

hi, my iPhone5s is only 3 months old, it has been like a whole month now since it started crashing, displaying the blue screen of death, since yesterday it was in the loop of restart-crash, and now it is stuck in recovery mode after lots of times displaying blue screen.
I cannot restore it as phone continues crashing again with blue screen, when iTunes displays error 14 on verification.
help please, this phone is all the means of communication I have.

It's a hardware problem. That's it. You shouldn't bother yourself with this situation. Just see an AASP.

I have an IPod 2nd generation I bought from a pawn shop. It worked for a day but now when I try to charge it, it keeps switching back and forth from the large full screen icon of a low battery and a lighting bolt below to the blue screen with the apple s

I have an IPod 2nd generation I bought from a pawn shop. It worked for a day but now when I try to charge it, it keeps switching back and forth from the large full screen icon of a low battery and a lighting bolt below to the blue screen with the apple symbol in the middle. I had it on charge all night but still dead.

Try here.
iPod touch: Hardware troubleshooting
You may have a hardware problem.

Hello i have a problem when i start woorksheet, my computer crash with blue screen sometimes.

hello i have a problem when i start woorksheet, my computer crash with blue screen.
OS: Win 2000 pack 2 and dasylab 7.00.05 ;ddi7.02 ;nidaq 7.0
I hve this problem sometimes and need to reebot my computer.This worksheet is used to generate 4 signals to output and have an acquisition tooin this 4 channels.
The error is in the blue screen:0x00000076 (0x00000000 , 0x81358300, 0x000001c2, 0x00000000).
Thanks for your help.

The DASYLab development team has read your message, and advises that there is insufficient information to be able to even start diagnosing the problem. We suggest that you send a note directly to [email protected], with your full contact information, DASYLab serial number, and the following technical information:
-The Help-->Report information - this will tell us more about the computer, video and installed memory
-Installed hardware - what DAQ devices are you using (exact models!)
-The worksheet that crashes - we need to see how the timing is configured in the worksheet
-What other programs are running at the same time?
-Does the worksheet crash every time?
-Does the NI-DAQ Test Panel work correctly for both inputs and outputs?
Sorry that we cannot be more help in this forum; we do not have much experience with blue screen under Windows 2000. This is very hard to do, and is almost always related to a hardware problem - either a resource conflict, or problems with one of the installed hardware devices (DAQ, Video, Memory...).
Regards,
-cj
- cj
Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

HELP...New Computer with blue screen crashes

I recently bought a Toshiba Qosmio x875-q7290. The computer came installed with Nortons internet suite. I uninstalled Nortons via add/remove programs in the control panel. I installed Kaspersky pure. What happens now is that I get a blue screen with white writing that say something about reboot your computer if this is the first time that this error has happened. I can't read the rest of the message because the computer starts to reboot. After doing this about 5-6x, by computer would start to boot up then there was some type of Dll error message and I couldnt advance farther on the screen. I called Toshiba tch support and they suggested a complete system restore(losing all my data). This morning I was having the same problem. Here is what the detail message says
Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 1033
Additional information about the problem: BCCode: 1a BCP1: 0000000000041790 BCP2: FFFFFA8005C26B00 BCP3: 000000000000FFFF BCP4: 0000000000000000 OS Version: 6_1_7601 Service Pack: 1_0 Product: 768_1
Files that help describe the problem: C:\Windows\Minidump\071812-23415-01.dmp C:\Users\Lemuel\AppData\Local\Temp\WER-57065-0.sysdata.xml
Read our privacy statement online: http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline: C:\windows\system32\en-US\erofflps.txt
Whats causing this and how do i fix it? I did all the required updates etc?

Bug Check 0x1A: MEMORY_MANAGEMENT
Bug Check 0x1: APC_INDEX_MISMATCH
Bug Check 0xF4: CRITICAL_OBJECT_TERMINATION
Bug Check 0xC1: SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION
Bug Check 0x7E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
0x0000001a OR 0x1a BHDrvx64.sys
0x1000007e OR 0x7e tdx.sys
Despite the multiple BSODs, and the memory management errors, this still may well be a software conflict problem. The BHDrvx64.sys file seems to be from Symantec BASH service for Symantec Endpoint Protection. The tdx.sys file a Kaspersky file. If there are remnants of Symantec/Norton AV left on your system, along with the Kaspersky AV, this is not going to be healthy. None of the ntoskrnl.exe, which is the central Windows NT OS Kernel file, crashes are going to help us much.
Click 'Start -> Control Panel - Programs and Features' and completely uninstall any and all Symantec/Norton components that you find there. Then use the Kaspersky Removal Tool to completely uninstall Kaspersky.
If no Symantec/Norton components appear in 'Programs and Features', let us know. It gets a lot more complicated to do this manually. In that case, begin by:
Then trying to stop the BASH driver BHDdrvx64
a. Open the Device Manager (devmgmt.msc)
b. Choose View > Show hidden devices and look for the BHDdrvx64 driver under 'Non-Plug and Play Drivers'
c. Right-click the driver and choose Properties
d. Select the 'Driver' tab to access the Startup Type option
e. Set Startup Type to 'Disabled'
f. Click 'OK' and reboot the system
Yes, Microsoft Security Essentials will provide all the protection you need, and have a much lighter touch with regard to resource demands.
Your Minidump analyses appear below. Give us an update on how things go with the uninstalls and the system seems after that.
Mike
==================================================
Dump File         : 071812-18002-01.dmp
Crash Time        : 7/27/2012 9:17:11 PM
Bug Check String : MEMORY_MANAGEMENT
Bug Check Code    : 0x0000001a
Parameter 1       : 00000000`00041790
Parameter 2       : fffffa80`05bc6b60
Parameter 3       : 00000000`0000ffff
Parameter 4       : 00000000`00000000
Caused By Driver : BHDrvx64.sys
Caused By Address : BHDrvx64.sys+9e373
Processor         : x64
Crash Address     : ntoskrnl.exe+7cd40
==================================================
Dump File         : 071812-23415-01.dmp
Crash Time        : 7/27/2012 9:17:11 PM
Bug Check String : MEMORY_MANAGEMENT
Bug Check Code    : 0x0000001a
Parameter 1       : 00000000`00041790
Parameter 2       : fffffa80`05c26b00
Parameter 3       : 00000000`0000ffff
Parameter 4       : 00000000`00000000
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+7f1c0
Processor         : x64
Crash Address     : ntoskrnl.exe+7f1c0
==================================================
Dump File         : 071812-09625-01.dmp
Crash Time        : 7/27/2012 9:17:11 PM
Bug Check String : MEMORY_MANAGEMENT
Bug Check Code    : 0x0000001a
Parameter 1       : 00000000`00041284
Parameter 2       : fffff8a0`045fb001
Parameter 3       : 00000000`00004d7f
Parameter 4       : fffff781`c0000000
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+7cd40
Processor         : x64
Crash Address     : ntoskrnl.exe+7cd40
==================================================
Dump File         : 071912-14523-01.dmp
Crash Time        : 7/27/2012 9:17:11 PM
Bug Check String : APC_INDEX_MISMATCH
Bug Check Code    : 0x00000001
Parameter 1       : 00000000`77ab138a
Parameter 2       : 00000000`00000000
Parameter 3       : 00000000`0000ffff
Parameter 4       : fffff880`0c71bb60
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+7f1c0
Processor         : x64
Crash Address     : ntoskrnl.exe+7f1c0
==================================================
Dump File         : 072212-13416-01.dmp
Crash Time        : 7/27/2012 9:17:11 PM
Bug Check String : CRITICAL_OBJECT_TERMINATION
Bug Check Code    : 0x000000f4
Parameter 1       : 00000000`00000003
Parameter 2       : fffffa80`12b3fb30
Parameter 3       : fffffa80`12b3fe10
Parameter 4       : fffff800`03582510
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+7f1c0
Processor         : x64
Crash Address     : ntoskrnl.exe+7f1c0
==================================================
Dump File         : 072512-19032-01.dmp
Crash Time        : 7/27/2012 9:17:11 PM
Bug Check String :
SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION
Bug Check Code    : 0x000000c1
Parameter 1       : fffff980`52934fe0
Parameter 2       : fffff980`52934a26
Parameter 3       : 00000000`001dc028
Parameter 4       : 00000000`00000032
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+7f1c0
Processor         : x64
Crash Address     : ntoskrnl.exe+7f1c0
==================================================
Dump File         : 072512-26348-01.dmp
Crash Time        : 7/27/2012 9:17:11 PM
Bug Check String :
SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION
Bug Check Code    : 0x000000c1
Parameter 1       : fffff980`868defe0
Parameter 2       : fffff980`868de746
Parameter 3       : 00000000`000fc028
Parameter 4       : 00000000`00000023
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+7f1c0
Processor         : x64
Crash Address     : ntoskrnl.exe+7f1c0
==================================================
Dump File         : 072612-11544-01.dmp
Crash Time        : 7/27/2012 9:17:11 PM
Bug Check String :
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
Bug Check Code    : 0x1000007e
Parameter 1       : ffffffff`c0000005
Parameter 2       : fffff880`01a2b896
Parameter 3       : fffff880`009a91e8
Parameter 4       : fffff880`009a8a40
Caused By Driver : tdx.sys
Caused By Address : tdx.sys+1861e
Processor         : x64
Crash Address     : tdx.sys+f896

Why is my MacBook Pro **crashing** changing to a blue screen with lines or distorted screen when I open logic or Ableton Live

Why is my MacBook Pro **crashing** changing to a blue screen with lines or distorted screen when I open logic or Ableton Live. Then I have to restart by long pressing the power button. Can somebody plz help me

What you describe sounds like a hardware issue. Unfortunately, you'll need to get that checked out by Apple. If you have an Apple Store near you, make an appointment with the Genius Bar and take the machine in for evaluation.

What does it mean when you computer crashes and when you turn it back on it shows you a blank blue screen with a little folder and a question mark in the middle?

What does it mean when you computer crashes and when you turn it back on it shows you a blank blue screen with a little folder and a question mark in the middle? It's a old imac from 1997.

I don't have original discs that it came with.
Then you still can use the second option with the keyboard combo I posted, called "resetting the PRAM."
Also when you way hold the c key down do you mean turn computer off and turn back on holding the c key?
Yes, or you can simply restart. As you don't have the CDs, this isn't on the plate any more.
The internal backup battery is not expensive and, in most iMacs is user-replacable. If yours has a tray-loading optical drive like this one:
it takes a major teardown to replace the internal battery. If this is the case, you'd be better off to leave the computer plugged in all the time; that eliminates the main reason for having a working battery.
If it has a slot-loading optical drive like this one:
things are much easier. The battery is visible through the RAM access door on the bottom of the computer case. The manual:
http://manuals.info.apple.com/en_US/iMacG3_2000UserManual.PDF
has sketches of how to access the RAM and therefore the backup battery. Unfortunately, the pdf on the manual goes up sideways on-screen and the RAM instructions are pretty deep into the manual. It's probably easier to scroll (for a while) to the section on adding RAM and print the applicable pages.
When you work on the battery, some sort of non-conductive pliers or large tweezer or forceps help unless you have tiny fingers. Make sure to note the polarity of the old battery and install the new one in the same orientation.
The battery itself is readily available. If price is no oblect, you can get it for a small rasom from Radio Shack Store ("Tandy" outside the US) as part number 23-026.
Online, they are dirt-cheap even after adding shipping. I buy backup batteries form this outfit:
3.6v Newer Technology Lithium 1/2 AA PRAM Computer Clock Battery

Blue screen with sound after clean install

Hi Everyone,
I have just replaced the hard drive on my MacBook Pro A1226 Model. The install went fine when it finished all I get is a blue screen with the osx music in the background.
I have tried deleting the ApplicationEnhancer file using single user mode, I have tried removing all the ATI Extensions but still no luck. I was able to get the welcome video up once but was unable to select my country or continue. I have also tried to complete the install using safe boot but no luck.
Any ideas or help would be brilliant.
Thanks in advance

Safe Boot by restarting your computer while holding down the "shift" key. Safe booting disables all nonessential processes, often times allowing you to start up when you would otherwise crash.
As of OS X 10.5.6 Safe Boot deletes the dynamic loader shared cache location in the /var/db/dyld directory. A corrupt cache here can cause the blue screen crash. Once you restart normally, the cache will be recreated. This should take care of the issue.
http://support.apple.com/kb/HT1564
http://support.apple.com/kb/HT1455
osx music
Music plays on startup?

Hp3400 keeps crashing with blue screen with clean windows 7 64

Similar Messages

Maybe you are looking for