Hp4580 works on usb but not on wireless

HP Photosmart C4580 All in one works fine with USB but not with wireless, using HP Pavilion Desktop P7-1108p w/ Windows 7.
Tried to reinstall with CD but puter refuses to proceed with run.
{Personal Information Removed}

Get the latest software for your printer from the "Support & Drivers" link at the top of this page.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

Can print via usb, but not via wireless network

My new MacBook Pro prints to my Epson RX500 when the printer is connected via USB to the MBP. However, when the the printer is connected by USB to my desktop PC running XP, the MBP does not print to it. I can see disks and transfer files wirelessly among desktop PC, laptop PC & MBP. The MBP finds the RX500 on the network, and has a driver for it. I can set it as the Mac's default printer. When I print, say from OpenOffice or TextEdit, the dialogs seem ok. Sometimes I see the print queue icon wink in and out on the dock. But the document doesn't get printed. The desktop says the printer is shared, and I can print over the wireless network from my PC laptop running XP.
One of the Apple troubleshooting pages suggests that I should have the same driver version on my XP desktop and my Snow Leopard MBP. I don't know how to tell what version the PC is running.
Any suggestions?

Just to be sure - you know that you can't use Epson's "USB-only" driver for printing to a Windows-shared printer?
You must use the Gutenprint driver - that's why Apple included the Gutenprint drivers in OS X.
Updates for Gutenprint:
http://gimp-print.sourceforge.net/MacOSX.php

I can connect my lexmark printer by usb but not wireless

i can connect my lexmark printer s400 series by usb but not wirelessly any thoughts please

I'm having the same issue. On my MBP 15" OS 10.7.3 the Lexmark printer does not connect to WIFI. It works on the USB connection. In wifi however it will work on the Virtual Box Windows 7 partition.
In my logic this means the printer is properly connected to the wifi (green indicator and working with Virtual Box and Windows 7) The MBP is properly connected to the wifi network as Virtual Box works in the Mac's environment. The printer is present in the System Preferences indicating it is Idle and does have a IP address.
When I do send a document to the printer it just sits in the Que and in System Preferences the status goes to Busy. In the Que it also indicates it is busy until it tmes out and indicate that communication with the printer is a problem.
Thanks for any suggestions.

Can't FaceTime anymore? iPad states wifi connected and iPhone 4 states not connected? I have wireless in my home? Not sure what happened. Password works for iPad but not on phone?

iPhone won't connect to wifi. iPad is connected. Password working on iPad but not on phone. Can't upload software update of IOS 7.1 because phone not connecting to wifi?

Connect iPhone to computer and open iTunes. You will be prompted to update to iOS 7.0. Keep your phone connected until the update is finished.

HP 3210, OS X, can print w USB but not w WiFi. Can ping and access printers webpage.

I can connect and print on my HP 3210 directly via USB but not via the network. I can ping the printer and access its built in webpage through the network though, so it has network connection. When I try to add a network printer no printer shows up, so I manually add the printers IP address (valid and complete) and the ‘Generic PostScript Printer’ comes up as default. After I installed the printer through USB I can also access the specific 3210 drivers but it doesn't work either.
I once managed to print '%!PS-Adobe-3.0 Query userdict (\004)cvn{(\004) print flush}put', then it continued to feed out blank papers until I canceled. I've tried the IPP, LPD and HP Jetdirect socket protocols together with the universal PostScript driver and the HP 3210 driver. One of the combinations returned the above line. Besides this one exception nothing happens, the printer appears offline.
Computers: One MacBook Pro 15" from 2011 with OS X 10.7.5 and two new MacBook Pro 13" with OS X 10.8
HP Photosmart 3210 All-in-One
Serial Number:
{Removed for privacy}
Firmware Version: R0046xxNx
Printer connected with ethernet cable to router, computers connected over wifi.
It has previously worked on my older MacBook Pro and on a PC I had before. It seems like an installation problem not being able to install the IP printer automatically.
Any help would be highly appreciated, thanks!

It could be that your router does not support Bonjour or it is not enabled. Go into the router settings and look for mDNS or Bonjour and make sure it is enabled.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

SanDisk ImageMate works on Vista, but not on Leopard

I bought an iMac when my old Windows XP machine from Dell died last Christmas, and am mostly very pleased with it. I used Boot Camp to install Vista Home Basic on it also, because I still needed to run some Windows software.
I recently acquired a digital camera from my daughter, along with a SmartMedia card reader by SanDisk (model SDDR-55 ImageMate). On the SanDisk website I found a driver for Windows that would work for 95, 98, ME, 2000, and XP. I downloaded it after not finding one for Vista listed. Similarly, there was a driver that would work for Macintosh OSX and OS 10.1. I downloaded it after not finding one specifically for Leopard.
I installed both drivers under their appropriate OSes and plugged the ImageMate into a USB port on the computer. What I found was that it worked fine under Vista but was not recognized at all by Leopard. I contacted SanDisk and they had me verify that it was not a problem with the USB port. Also, they had me try to install it on another Mac (my daughter has a Mac laptop running Leopard) and it didn't work there either. So I know the ImageMate works and the USB port works.
SanDisk then suggested I contact Apple. Is there anything I can do to get the ImageMate working on Leopard?
One thing I noticed was that when I ran Terminal and went to /System/Library/Extensions and looked at a couple of files created during the install on the Mac, the owner and group were different from all the other files, so I made them match the others thinking file ownership might be the problem. Alas, it was not. (I did the install while logged in as admin.)
Can anybody point me in the direction of what to do next?
Thanks in advance,
Sherry

Many thanks to both of you for responding. My guess is that my ImageMate is getting old and SanDisk isn't going to help support it. I'm sure they'd rather I replace it by buying one of their newer models.
One of my lesser attractive qualities is that I am cheap, and hate to throw away anything that still works. Since this little doobie still does (under Vista), I'll probably limp along with it there until I can't stand it anymore and buy a new one. I appreciate learning that some require drivers and some don't: that will help when it comes time to buy a replacement.
Neither here nor there, but this is the 2nd device I've had difficulty with getting to work on Leopard but not on Vista (the other being my HP PSC 1315xi printer/scanner/copier).

Imac works well with ethernet not with wireless - although my other imac work fine w the wireless

imac works well with ethernet not with wireless - although my other imac work fine w the wireless? do i have a prob with a wireless card?

Are the computers in the same place?
You can look around for wireless networks. See:
iStumbler - 98
find AirPort networks, Bluetooth devices, Bonjour services
http://www.versiontracker.com/dyn/moreinfo/macosx/17572
>USB dongle
Newer Technology MAXPower 802.11g/b Wireless USB 2.0 Stick Adapter $15.99 http://eshop.macsales.com/item/Newer%20Technology/MXP2802GU2/
Newer Technology MAXPower 802.11n/g/b USB Adapter. The easiest way to add Wireless Connectivity to ANY computer! 'n' speed is the newest and fastest. $29.99 http://eshop.macsales.com/item/Newer%20Technology/MXP802NU2C/

Custom F4 help in a BSP application working in Mozilla but not in IE

Hi,
I have created a custom F4 help in a BSP application.
It is working in Mozilla but not in IE. I tried enabling javascript as well but still it is not working.
Can someone please suggest a possible solution for this?

Hi,
See simmilar discussion in thread /thread/1883519 [original link is broken]
I think this may be helpful for you.
Thanks,
Chandra

Why does the counter work in MAX, but not Labview?

Please help, I have been away from Labview for over 3 months, and I am quite rusty....
Last year, I successfully configured NI9401 to measure period (seconds) by counting the rising edges of my sensor signal. Since then, I have aquired a new PC, and loaded all my software into it, including the Labview VI's that successfully worked on the old computer.
I can see the digital signal using MAX and the test panel for the NI9401, so, I know my wiring and my TTL signal is OK, but, when I try to run the attached VI, nothing happens except the error below.. How do I tell this VI to look for the signal on MOD3/CTR0 and channel 14?
Thanks. I am sure it is a small adjustment...this worked fine a few months ago...not sure what is wrong now.
Thanks,
Dave
Solved!
Go to Solution.
Attachments:
continuously measure period buffered_singlechannel_forum_feb_23_2012.vi ‏20 KB

OK, now. Resolved the issue. The vi is fine, but, some shaky wires were identified...worked in MAX but not in the vi. Now that the connections have been tightened up, it works for both. Sorry for the inconvenience.
Dave

Works on emulators but not on mobile devices

Hello,
My project works on emulators but not on mobile devices (no image and on Samsung it says "unsupported file").
Please help, I don't know what to do. My configurations: MIDP 2.1, CLDC 1.1.
Thanks in advance.
Edited by: Vitali.pom on Oct 27, 2011 12:01 PM

Edit: I succeeded to solve it accidentally. I did the following: Sign the jar in Netbeans, clean and build, the jar didn't work, I wiped out the .ks from the jar and clean and build again. Now it worked.
Edited by: Vitali.pom on Oct 30, 2011 1:28 AM

Wifi works at home but not when away from home

My Wifi works at home but not when away from home, what is wrong? I thought with a phone plan I didn't need to have a wifi connection.

You either need WiFi or Cellular (or both). If you have neither, you can't connect to the internet.
Most people use WiFi at home and Cellular while away from home, or connect to public WiFi networks where there are some.

My apple id works on itunes but not on my ipod touch, what gives ?

my apple id works on itunes but not on my ipod touch, what gives ?

What are you trying to do on the iPod?
Have you went to Settings>Store and sign out and then sign back in?

Album Art works for most, but not all

I was reading previous forums on the subject, but no clear answer was given..
The album art shows up fine in itunes and my library and works for most of my music on my ipod, but how come some album's art does appear? I have it set manually and select 'Get Info' then 'Artwork' and add it from there, then drag in the finished product to my ipod. I've been doing that and it works fine for most of the albums, but every so often, the album art will not appear on my ipod. Am I doing something wrong? I take them all from the same source (amazon.com) but it makes no sense to me how some randomly don't appear.
I tried deleting the artwork and re-adding it, but nothing happened again. If you could answer why it works for most but not all or how I can get the album art to appear for the ones it will not by re-doing something, it would be appreciated. thanks.

I encountered the same problem in the beginning. When I compared the size of the original images, the working ones seemed to be smaller in general, so I reduced the size of all covers I intended to upload on the pod to 300x300 pixels.
This seemed to work - for 2 days. I bought the pod on friday, had pictures on sunday, but on Monday (after the first time the pod was fully discharged) none were left left.
So I ended searching this forum for related problems...
And decided to join my problem to this entry.

How to send active links in email from firefox. Works in IE but not Firefox... Is there a setting to change?

how to send active links in email from firefox. Works in IE but not Firefox... Is there a setting to change?
== This happened ==
Every time Firefox opened
== Always

Check with your web mail service provider for help with that issue.

Medical app from Intuit works in IE, but not Firefox.

Encrypted medical app works in new IE, but not Firefox. Everything works down to the end, and click on "continue" and nothing happens. A tech and I have spent hours on this. Did not work on FF5 or 6. Did not work on old IE, but did on fresh new version with no data files copied in.

If it works in IE but not FF, then it has nothing to do with the mp3s. More likely it's because of the HTML on the page.
To start, page is missing DOCTYPE declaration... a MAJOR problem. The DOCTYPE declares which set of rules the browser will use to display the page. Without it, different browsers go crazy or do not work at all.
http://www.w3schools.com/tags/tag_DOCTYPE.asp
Validate the html code here:
http://validator.w3.org/
You will have to fix all the errors if you want this to work in all browsers.
Best wishes,
Adninjastrator

Hp4580 works on usb but not on wireless

Similar Messages

Maybe you are looking for