Hp5000 laserjet not printing from tray 3

hp 5000dn laserjet not printing a3 from a3 tray. win7 64 bit

Can you print to PDF from these applications?

Similar Messages

P4014n Will Not Printer From Tray 2

I have a HP Laserjet p4014n that will not print from tray 2 as normal it takes between 20 -40 attemps before it prints the test page. I have replaced the feed roller but that was not the fix.This printer prints fine from tray 1 (manual feed tray)

Hi HellyBe,
This is a commercial line product. For the best answer to your questions you will need to repost your question to the following links.
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Laserjet not printing from some applications

Dear all,
I am having some trouble with my HP Laserjet P1005. I am finding that it just refuses to print anything from either Adobe Reader or Safari but has not problems printing from Word or Firefox. There are no error message, the document goes to the queue and is just 'stopped' for no reason. Pressing resume obviously has no impact. I have d/l-ed the most recent drivers from HP to no avail.
Any help would be much appreciated,
Akshay

Can you print to PDF from these applications?

HP Laserjet P4014dn won't auto print from tray 1

HP Laserjet P4014dn stopped auto printing from tray 1. Can't manually print from there either. Now it always pulls from tray 2 (bottom tray) even if paper is loaded in tray 1. Auto print is selected in software setting. SN [Personal Information Removed] CB512A. Help!

There may be a couple of reasons why the printer will not auto print from Tray 1.
The following references the User Guide for the printer which you can obtain from here:
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01295101/c01295101.pdf
Page 18 of the User Guide has the section "Paper Handling Menu".
This section defines the menu items that can be used to set Size and Type for Tray 1.
Page 85 of the User Guide has the start of the Configure Trays Section.
In this section there are two notes. If Tray 1 is set to ANY SIZE and ANY TYPE, the printer will pull from that tray whenever media is loaded in that Tray. If Tray 1 is set to a specific size, it will act like a Cassette. This means that it will follow the paper handling model of Trays 2, 3, etc..
Example: Tray 1 is set to Letter, Tray 2 is set to Letter. When a job is sent from the PC requesting Letter and the Sources is Auto, the printer FW will look for the highest number tray that has letter installed and pull from that tray. Thus, Tray 2 will always be used unless Tray 2 doesn't have paper.
Page 86 has the section "Configure a tray by using the Paper Handling menu".
Follow the steps in this section to validate that Tray 1 is set to ANY SIZE and ANY TYPE. If not set to ANY SIZE, ANY TYPE then change the setting to be ANY SIZE and ANY TYPE. You may have to scroll through the list of sizes and types to find what you are looking for.
Once possibility is that the printer is not detecting that paper is loaded in Tray 1. One method to verify this is to remove all paper from Tray 2 and lower trays if there are more than just Tray 2 installed. This will force the printer to pull paper from Tray 1 if paper is present. If paper is present and the Tray 1 menu items are set to ANY SIZE and ANY TYPE and the printer prompts for you to load Tray 1 with paper, it is possible that the printer is not detecting that paper is in the tray.
In this case, I would recommend you contact HP Support as the media presence sensor may no longer be working properly.
Kazman
I am an HP Employee
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

LaserJet 3105x printing to Tray 1 - Manual on macs prints from Tray 3

On every other model of LaserJet when the user selects "Tray 1 - Manual" under the mac print options the printer prompts the user to load paper into Tray 1 and waits indefinitely until paper is loaded.
Now with the LaserJet 3015x, the printer just prints the job from Tray 2 without ever prompting or waiting for paper in Tray 1.
If Tray 1 is dropped down and loaded with paper before the user prints it will print from Tray 1. However my users are not accustomed to doing this because all other laserjets do not behave that way.
Windows clients seem to behave the "normal" way, it just seems to be the mac clients and it occurs whether we select the "HP LaserJet 3015" driver or the "HP LaserJet 3010 Series" driver.

Now works for whatever "magical" reason. Question is now a moot point.

LaserJet Pro Scans, prints test page but will not print from a file

I installed a LaserJet Pro200 MFP M276nw on my wife's Toshiba Satellite (Windows 7 64Bit OS) laptop yesterday (Printer is brand new out of the box). I installed with a wireless connection. It will print a test page and also scan wirelessly but will not print from a file i.e. a PDF. I installed it on my HP Probook this morning and it works fine. Any suggestions would be appreciated. The thought of paying Geek Squad 75 bucks rubs me the wrong way, especially since i just paid them 100 for an extended warranty. Thanks!

Welcome to the HP Forums JBottensek,
I see by your post that the printer won't print a PDF document from the one computer.
I can help you with this issue.
I have provided a document to go through the steps which should resolve this issue for not being able to print PDF documents. Cannot Print PDFs from Adobe Reader.
If you need further assistance, let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

7520 not printing from photo tray

Brand New 7520 is not printing from the photo tray. I am printing from photoshop CS5 and I do not see where I can select the photo tray. In this instance, I am selecting 4x6 paper, but then it tries to print from the main tray, which I have emptied so I do not continue to print on plain paper. I have browsed some of the previous posts, but I have not been able to find a solution. It there a way that I can tell it to always print photos or a certain size paper from the photo tray? The reason I bought this printer was to be able to print small photos. Any assistance would be greatly apprecaited! Ciao!

I understand now. I want to provide a document on how to print photos in version 10.6 which should be relatively close to your settings. If this doesn't help you, let me know and I will gladly hand-write individual steps for you, this is just a little easier at this time. I have learned from personal experience that the main tray will not even register the photos, as I had a customer one day kept getting an out-of-paper error message during ePrint and he did not know you had to lift up the see-through tray to put photos in there. That isn't to say it is not possible through a Mac program. ePrint is really basic so it likes everything to be perfect. Tell me if the above link helps you. If not, I have your version of Mac (I believe) and this printer. I will see if I can recreate this if you need me. PS- Thank you so much for providing this picture for me for troubleshooting purposes. Might I add, that is a beautifully artistic photo.

HP 2100TN - Can't print from Tray 3

I have a Laserjet HP 2100TN. I have it configured with a Tray 3 but it refuses to print to Tray 3. It prints from Tray 2. If I select Tray 1 it works fine (prints from tray 1). This used to work under 10.4.x but has been broken in 10.5.x. I tried reinstalling (Archive and Install) to no avail. I was using the default Laserjet 2100 series driver. I tried Gutenprint version and it worked except I had to select Tray 4 for it to print from Tray 3. Gutenprint, however, only allows me to print up to 600x600 dpi whereas the default Laserjet 2100 series allows me to print 1200x1200 dpi.
I also tried installing the driver from HP and it did not work either.
Any help would be appreciated.

I did as benshaine posted in his thread here: https://support.mozilla.com/en-US/questions/789780 I installed Firefox 3.5.10 to my desktop, printed from 3.5.10 and then went back into 3.6.x and I could print.

LJ4000 - Paper not feeding from tray 2

LJ4000 - Paper not feeding from tray 2
When printing, the printer always jams a second or two after the start.. When the tray is removed, you can see that one sheet of paper has moved forward until the leading edge just touches the separation roller.
I suspected worn rollers, so I replaced the separation roller (RF5-2490) and the tray pickup roller (RF5-2490). The printer still jams as before.
I now suspect that one or more of the 4 D-shape pickup rollers (RB1-8957) may need replacing. I have read the Service Manual for the printer:
http://www.feedroller.com/Store/Service%20Manual/LASERJET%204000,%204000N,%204000T,%204000TN%20Servi...
but I am not sure which sub-assembly to remove to get at the rollers. Advice anyone?

Hi HellyBe,
This is a commercial line product. For the best answer to your questions you will need to repost your question to the following links.
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

HP Officejet Pro 8630 won't print from tray 2; says there's no paper

Action: Print from tray 2.
Expected Results: Paper feeds from tray 2 and prints.
Actual Results: Printer displays "out of paper" dialog.
Notes: Ever since I purchased the Officejet Pro 8630 six or eight months ago, tray 2 has not functioned. It says there's no paper in that tray. I've tried multiple types of letter sized paper. I've inspected the bottom of the main printer unit and the top of tray 2 for signs of damage; there doesn't seem to be any.
Tray 1 works just fine. It's actually a fantastic printer. The best I've owned. If only Tray 2 would work.

Hi @RouterIncident,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.
If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

OfficeJet 8600 Premium - Faxes Only Printing from Tray 2

I'm running into an issue with an OfficeJet 8600 Premium on OS X (Lion), but this shouldn't be OS specific.
It appears that incoming faxes are requiring tray 2, even though the default tray is set to 1 and the media lock is off. The printer reports that it's out of paper, even though Tray 1 is full.
I've removed the lower tray assy, checked the paper size settings within the trays, set the default to 2 and back to 1, set the media lock on 2 with the default on 1, rebooted the printer and computer, but nothing seems to make a change in how incoming faxes are printed.
I am successfully able to print from tray 1 with normal print jobs. For some reason, the fax portion of the printer just defaults to tray 2, and I can't find where I can reset that to tray 1...or to follow the defaults of the machine.
Any thoughts?

so you are telling me the default is tray2 only and the software does not allow you to choose like ALL prior hp!!!! This is the dumbest software i have ever seen...i have stuggled with this for over a year to only hear that hp decided what i should do!!!! all my programs select tray 1 for regular paper and tray 2 for medical claims! yes it is used for two different types of paper....i do not want to change hundreds of documents because hp decided where i should default print and fax from! is there a fix to allow me the user to select where i would like things printed from....thanks....how stupid are you hp!!!! why would you take away choices so basic as to where a fax is printed from.....

Only printing from tray 1 with Matlab

Hello,
I have recently purchased a HP officejet pro x451, and have set all its default preferences to printing from tray 2 (which holds A4 paper). However, the printer only seems to print from tray 1 and will not continue until I have filled tray1 with paper.
I must specify that I am trying to print via Matlab (printing from Word is fine).
I hope someone can help!
Thanks very much.

Hi BerthB,
When you print from Matlab, have you checked what is the tray source setting in the print dialog? It is a dialog when you click "print" button. Some application softwares might set it to "Tray 1" by default. This will override the setting on your printer, where you set "Tray 2".
You can set tray source setting to "Tray 2" or "auto select" in your case.
Regards,
Yun_G
Although I am employed by HP, I am speaking for myself and not for HP.

My wireless HP Deskjet 3050 printer will not print from web sites.

My HP Deskjet 3050 J610 printer will not print from web sites - it prints ok from WORD, etc. I keep getting the error message: "An unknown error occurred while printing." This problem only arises with Firefox browser.
The printer is connected wirelessly to a network and this occurs when I use a laptop on the network. It is also connected via cable to a desktop computer but there is no problem in printing from the desktop.
Any assistance would be appreciated.

That sounds as if you need to investigate to see if you were able to clear all of the paper that was causing the jam.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Hp envy 4500 will not print from windows 8. Thinks it prints, but it doesn't.

Am trying to print from my Toshiba laptop running Windows 8 to my HP Envy 4500 wirelessly. Works fine from my ipad, works fine from my desktop and laptop running Windows 7. I have uninstalled and re-installed the printer driver 5 times. Printer is recognized, has an IP addrress, and will print an internal test page. When I print to it from my Windows 8 machine, the file goes in the queue, gets a port, and then disappears as if it was printed. Nothing prints. Please help, this is SOOOOOOOOOOOOOOOOOO frustrating.
This question was solved.
View Solution.

Having same problem with my Toshiba laptop windows 8. Will not print from laptop, printer prints from ipad, and iphone.
Deleted and reinstalled several times as well both ways with disk, and wizard.
still unable to print from laptop, have to email everything to ipad in order to print.
so annoying and frustrating.............

I can not print from Firefox, Firefox is not responding

I can not print from Firefox on one PC in my office. At one time printing was operable from Firefox on this PC, the user told me about one month ago Firefox would no longer print.
I went to the users PC - Windows XP Professional SP3 - Firefox opens no problem, I can go to any website, but when I click on the print icon, or file, print, nothing happens. I do not see the print icon in the task bar which shows you something is spooling, printing, I open Task Manager and I see Firefox is Not responding. I must end task.
We can print anything else on the PC, Internet Explorer 8 prints successfully, just Firefox will not print.
I also uninstalled the network printer, re-installed. Connected to another network printer, Firefox still will not print.
I also uninstalled the latest version of Firefox on the PC 15.0.1, went back a few versions and Firefox still will not print.
Can someone assist why Firefox refuses to print and when you try to print Firefox goes to a Not responding status ?
Thanks,
Bob

Hi Bob12
try to [http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer Reset printer] in [http://kb.mozillazine.org/About:config about:config] and check it again.
thank you

Hp5000 laserjet not printing from tray 3

Similar Messages

Maybe you are looking for