HP530 Processor/Memory upgrade
I've been looking for info about the maximum processor supported by this HP530 laptop, and about the max memory it supports.
I did not find answers. According to HP, this notebook supports max 2 GB ram (2x1 GB), and a Core Duo T2050 Processor.
I want to inform to people looking for this kind of information that I upgraded my laptop to the following configuration:
Processor: Intel Core 2 Duo T7200 @ 2.00 GHz
Memory: 4GB installed (only 3.37 Gb usable, x64 system, 256Mb reported video)
Bios: F0.7
Part Number: GN796AA#ABM
Chipset: Intel 945, PROBABLY 945GM as reported under OpenGl by Everest Home, unable to detect it with intel utility under x64 system
Thank you for the info!
I was searching someone to tell me if the 530 would run a t7200!
But why only 3.37GB of ram used?
MAybe a limitation / incompatibility in the memory controller?
Who knows?
I will also upgraded like this (t7200 + 2x2 GB ram) and post back.
Thanks!
Similar Messages
-
Memory upgrade fail - Kernel panic after put old memories back
I People, this is my first post here and unfortunately is to report a problem, not to help friends.
I did an memory upgrade last weekend. After this, he will not boot normally, only in safe mode.
I discovered that they sent me 1333Mhz memories, and my mac (mid 2009) supports only 1066Mhz.
I put the old memories again, however I believe that the system did not recognize.
As you can see below, the system recognizes two modules:
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353237334448302D4348392020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
It is not true, I' using now 2 x 2GB, DDR3, 1067 Mhz (stock)
I tried to reinstall the system, but when I try, I got crash again.
how can I solve this issue?
Interval Since Last Panic Report: 5298 sec
Panics Since Last Report: 6
Anonymous UUID: EAEB74C4-4B23-BCC2-1A48-B6FEB255C9FF
Mon Apr 1 16:37:33 2013
panic(cpu 1 caller 0xffffff800e0876ab): "Spinlock acquisition timed out: lock=0xffffff8011bff270, lock owner thread=0x10d9fb0aa, current_thread: 0xffffff801f873000, lock owner active on CPU 0xffffffff, current owner: 0x10d9fb0aa"@/SourceCache/xnu/xnu-2050.7.9/osfmk/i386/locks_i386.c:363
Backtrace (CPU 1), Frame : Return Address
0xffffff80f54fbd10 : 0xffffff800e01d5f6
0xffffff80f54fbd80 : 0xffffff800e0876ab
0xffffff80f54fbdb0 : 0xffffff800e06256b
0xffffff80f54fbf40 : 0xffffff800e0b7f69
0xffffff80f54fbfb0 : 0xffffff800e0ce3d1
BSD process name corresponding to current thread: diskarbitrationd
Boot args: config="\OS X Install Data\com.apple.Boot" root-dmg=file:///OS%20X%20Install%20Data/BaseSystem.dmg
Mac OS version:
12A269
Kernel version:
Darwin Kernel Version 12.0.0: Sun Jun 24 23:00:16 PDT 2012; root:xnu-2050.7.9~1/RELEASE_X86_64
Kernel UUID: 8D5F8EF3-9D12-384B-8070-EF2A49C45D24
Kernel slide: 0x000000000de00000
Kernel text base: 0xffffff800e000000
System model name: MacBookPro7,1 (Mac-F222BEC8)
System uptime in nanoseconds: 8887270925
last loaded kext at 1689458563: com.apple.driver.AppleUSBTCButtons 235.4 (addr 0xffffff7f8f6c7000, size 20480)
loaded kexts:
com.apple.driver.AppleUSBTCButtons 235.4
com.apple.driver.AppleIRController 320.15
com.apple.driver.AppleUSBTCKeyEventDriver 235.4
com.apple.driver.AppleUSBTCKeyboard 235.4
com.apple.driver.DiskImages.ReadWriteDiskImage 344
com.apple.driver.DiskImages.SparseDiskImage 344
com.apple.driver.DiskImages.UDIFDiskImage 344
com.apple.driver.DiskImages.FileBackingStore 344
com.apple.driver.DiskImages.HTTPBackingStore 344
com.apple.driver.DiskImages.RAMBackingStore 344
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.AppleUSBCardReader 3.1.0
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleUSBHub 5.1.6
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AirPort.Brcm4331 600.15.20
com.apple.driver.AppleFWOHCI 4.9.5
com.apple.driver.AppleAHCIPort 2.4.0
com.apple.driver.AppleUSBEHCI 5.1.5
com.apple.driver.AppleUSBOHCI 5.1.5
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.driver.AppleUSBMultitouch 235.7
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.DiskImages.KernelBacked 344
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.1
com.apple.iokit.IOUSBMassStorageClass 3.5.0
com.apple.driver.AppleUSBMergeNub 5.1.5
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.driver.AppleMCP89RootPortPM 1.11
com.apple.iokit.IOAHCIFamily 2.2.0
com.apple.iokit.IOUSBFamily 5.1.6
com.apple.driver.NVSMU 2.2.9
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacBookPro7,1, BootROM MBP71.0039.B0E, 2 processors, Intel Core 2 Duo, 2.4 GHz, 8 GB, SMC 1.62f7
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353237334448302D4348392020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.16)
Bluetooth: Version 4.1.3f3 11349, 2 service, 11 devices, 0 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: ST9500420AS, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24600000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26100000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06600000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06610000 / 7
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x06500000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0x06300000 / 2Hi BGreg,
I already reset the PRAM as you said.
I've cleaned the memory modules as indicated by Linc above.
Today I formatted my harddrive to try a clean install, but system crashs after 5%, 10%.
There is something making me worried:
In one of my tries, I opened the system view to check my actual hardware configuration, and to my surprise, the system shows me 8GB installed. Cannot be. I have 2 x 2GB.
Where my system stores this information? There is a way to reset it? I tried last hour install the snow leopard, that cames with my mac, by DVD, but does not worked too.
Thank you all so far.
Giuliano -
Memory Upgrade on DV7T-3000 (NQ339AV)
Hello,
I have a Pavilion DV7T-3000 with i7-820QM Processor. I am planning on a memory upgrade. Has any one tried upgrading it to 16GB RAM ? (2 x 8GB). As per specs it can only go up to 2x4 GB.
Thank you for for any feed back.I believe you should try to PM a level 8 or higher expert here and see if they will access someone from HP.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster. -
Physical Memory Upgrade [SAP, Oracle parameter changes]
Hello Guru,
Good day!
I'm not sure if I'm in the correct forum, please bare with me if I'm not.
We are actually planning to increase our Production [Physical Memory] server from its current size 15360GB including [oracle, SAP & OS] to 44GB memory. Do you have any idea how can we calculate to the most needed SAP / DB parameter should be increase after we allocate the 44GB in preparation for Go-Live. Below are details of my systems [oracle version, kernel, R/3 System, OS version, SAP parameter and DB parameter.
Reason for memory upgrade: will create two client in one system with a different number of users and different plant e.g. America / Canada
======================================================================
SAP R/3 Version: SAP 4.6C
Oracle Version: 10.2.0.4.0
OS Level: AIX 5.3
orapaa> oslevel -g
Fileset Actual Level Maintenance Level
bos.rte 5.3.8.0 5.3.0.0
Physical Memory
Real,MB 15360
======================================================================
kernel release 46D
kernel make variant 46D_EXT
compiled on AIX 1 5 0056AA8A4C00
compiled for 64 BIT
compile time Aug 17 2007 10:57:49
update level 0
patch number 2337
source id 0.2337
======================================================================
orapaa> prtconf
System Model: IBM,9117-MMA
Machine Serial Number: 06DDD01
Processor Type: PowerPC_POWER6
Processor Implementation Mode: POWER 6
Processor Version: PV_6_Compat
Number Of Processors: 4
Processor Clock Speed: 4208 MHz
CPU Type: 64-bit
Kernel Type: 64-bit
LPAR Info: 9 SWT_AMR_SADCB335_SAP_HA_PRI
Memory Size: 15360 MB
Good Memory Size: 15360 MB
Platform Firmware level: Not Available
Firmware Version: IBM,EM340_095
Console Login: enable
Auto Restart: true
Full Core: false
======================================================================
Our current used SAP parameter
Profile parameters for SAP buffers Parameters Name Value Unit
Program buffer
abap/buffersize 850000 Kb
CUA buffer
rsdb/cua/buffersize 10000
Screen buffer
zcsa/presentation_buffer_area 20000000 Byte
Generic key table buffer
zcsa/table_buffer_area 100000000 Byte
Single record table buffer
rtbb/buffer_length 60000
Export/import buffer
rsdb/obj/buffersize 40000 kB
Table definition buffer
rsdb/ntab/entrycount 30000
Field description buffer
rsdb/ntab/ftabsize 60000 kB
Initial record buffer
rsdb/ntab/irbdsize 8000 kB
Short nametab (NTAB)
rsdb/ntab/sntabsize 3000 kB
Calendar buffer
zcsa/calendar_area 500000 Byte
Roll, extended and heap memory EM/TOTAL_SIZE_MB 6144 MB
ztta/roll_area 6500000 Byte
ztta/roll_first 1 Byte
ztta/short_area 1400000 Byte
rdisp/ROLL_SHM 16384 8 kB
rdisp/PG_SHM 16384 8 kB
rdisp/PG_LOCAL 150 8 kB
em/initial_size_MB 4092 MB
em/blocksize_KB 4096 kB
em/address_space_MB 4092 MB
ztta/roll_extension 2000000000 Byte
abap/heap_area_dia 2000000000 Byte
abap/heap_area_nondia 2000000000 Byte
abap/heap_area_total 2000000000 Byte
abap/heaplimit 40000000 Byte
abap/use_paging 0
======================================================================
Oracle Parameter
Oracle Parameter Name Value Unit
SGA_MAX_SIZE 6192 MB
PGA_AGGREGATE_TARGET 400 MB
DB_CACHE_SIZE 0
SHARED_POOL_SIZE 960 MB
LARGE_POOL_SIZE 16 MB
JAVA_POOL_SIZE 32 MB
LOG_BUFFER 14246912
db_block_buffers 655360
Thanks and regards,
MikeI feel the best way to get the parameters which needs to be adjusted is to go for EarlyWatch Check after increasing the Physical Memory of your SAP system, as we cannot say how and which parameters needs to be checked and changed.. as there is some dependiblity also between the parameters...
All the best ! -
Can anyone recommend a good memory upgrade.I have a k7n2 delta2 mb,an athlon 3000 processor,and nivida fx5700 128mb video card.I am currently are using 2 sticks of 256 {512} 266 ddr ram pc2100 {I think}.Any suggestions? thanks
Quote from: traveler on 23-February-05, 06:06:12
Can anyone recommend a good memory upgrade.I have a k7n2 delta2 mb,an athlon 3000 processor,and nivida fx5700 128mb video card.I am currently are using 2 sticks of 256 {512} 266 ddr ram pc2100 {I think}.Any suggestions? thanks
Hi traveler!
I am quite happy with my Mushkin CL2 Blue memory. According to the Mushkin website they actually ran compatibility tests with a K7N2 Delta2. I have not had one problem caused by the memory!
ssbf -
Memory upgrade on iMac G3 700, help with system crashes
I tried to do a memory upgrade on my iMac, so I bought two kingston 256 MB PC133 modules, but none will work, the system starts, but hangs in about two minutes after loading the desktop. I went back to use the older memory module wich is an spectek, but I need the upgrade, any ideas?
Thanks!
FedericoMG.
Ps: Sorry about my english... I'm from Argentina... :-PHi Federicomg
The iMac 700 G3 should have been supplied with 1 stick of 256mb ram. However which is the correct type i am not sure as the Apple specifications for this model state PC100 whereas my iMac G3 700 graphite was supplied with 256 MB PC133-333 SDRAM
http://support.apple.com/specs/imac/iMacSummer2001.html
Apple profiler from my iMac this is the original supplied RAM from Apple:-
DIMM0/J13: Size: 256 MB
Type: SDRAM
Speed: PC133-333
1) I would re-instal the original ram and open system profiler to see what type the ram is.
2) Keeping the original stick in place add another stick of the new ram and look again in profiler to see if its recognised and again try the second stick to see if there's a problem with one of the sticks.
I am currently running my iMac with a small upgrade of RAM and the additional RAM is 128MB of PC100 and i have noticed the performance improvement since adding the PC100 so it's working and i have suffered no ill effects doing this..
paul.. -
Hi,
My system is based on Ms-6195 K7 pro and Athlon 700 mhz. 192 Mb Ram (128Mb module + 64Mb module)
Problem:
when I try to upgrade memory with a sdram 256Mb PC100 module, the memory test can't finish and my system don't boot.
Please can you tell me how configure coreectly the BIOS or tell how to do.MS-6195 memory upgrade.
I have also tried using new PC100 256Mb memory and am getting nowhere.
The ones that I have bought are single sided, [8 chips on only one side]
and do not work with my motherboard, however, if I put them into another,
older PC, it shows up as 128Mb.
So I assume that the DIMM is working OK, and that the 'old' PC has a memory size limitation??
I have tried the same things as wbs and Grommit and got the same results.
So I assume that the answer is in getting older DIMMs, double sided with 8 chips on either side.
Does this seem to be about right??? -
Hi,
Can I install 2 x Crucial 4GB DDR3 - 1333 SODIMM 1.35V 204 PIN - CT51264BF1339J on a Macbook Pro 13 inch late 2011?
Currently, I have 4 GB (2 x 2 GB) and I want to upgrade to 8 GB. There is a controversial info regarding this particular memory module, some people say it is not compatible.
When I look to the specs I find:
204 PIN form factor = OK
1,35 V = OK
DDR3 = OK
1333 = OK
SODIMM = OK
Max 8GB = OK (2 x 4GB)
Latency= 9 cicles (same that stock modules supplied with the laptop) OK
The thing is Crucial, sell an identical specs module that costs quite more. They claim it to be compatible with Mac. The also sell this one I mentioned as being not compatible. The funny thing is that specs for both are identical. I only find a difference on the pricing. So I am really confused.
Do they one to sell me a more expensive one like being specific for Mac or there is a hiden specification that makes the two modules to differ from each other?
Can somebody confirm this info to me, please?
Many thanks in advance
Best RegardsNews on this subject:
A Crucial support representative replied saying:
"Mac compatible memory is guaranteed to work in your specific system. There may be subtle differences in non specific memory that will cause it not to work for you such as chip solution and the configurations of chips..."
Well, I find it very ambiguous technically speaking. If they sell good quality memory as they claim, I do not see which subtle differences will affect the functionality. The chip configuration is standard and chip solution is about quality. So Crucial should be all right as everyone claims (even if manufactured in China)
So I went a head and both 2 x CT51264BF1339J for a very reasonable Belgian price and installed it into my system just two minutes ago. I am writing this using the mentioned system.
I was on Google after 30 seconds of taping the On button. Although it did not changed a lot as this startup timing is more related to the Hybrid 750GB HDD (SSD + Conventional Drive) I upgraded few months ago.
I upgraded the memory to run Virtual Box and Parallel desktop more easily though it worked quite good with 4GB. I did not upgraded to 16GB because it is not necessary on my usage. Only one virtual machine at once + E-mail + Browser + some PDF opened. Some technical stuff and nothing like Photoshop or similar. Thus the huge money difference would have gone for nothing if I buy the specific Mac modules of 8GB each as "Crucial Memory Upgrade Tool" subjected me. -
I ordered 8GB memory for my imac mid-2011 model.
I then tried to install and all I'm getting is three beeps telling me there's something wrong with my memory.
I've tried all configurations but can't get the 2x4gb modules to work.
I've had to stay with only the original 2x2gb ones it came with.
Can anyone please help.
The only difference, besides the size, between the two modules is that on the 4gb ones is says PC3-10600S-9-10-F2 and the 2gb ones say all the same except instead of F2 at the end it's F1.
Cheers.Which would seem to suggest that you may (unusually) have a doubtful memory module. Less unusually, you would have paid over the top for it.
Many people on these forums speak well of the following suppliers.
In North America contact OWC … Upgrade Apple iMac Memory
In Europe contact Crucial.com … RAM Memory Upgrade
Both companies have facilities to guide you and will recommend the correct memory package to meet whatever needs you describe to them.
There may be benefits buying from your own geographical location insofar as Shipping charges, Local sales taxes and Exchange rates. Check out the basic memory costs and do your sums next time you buy. -
Memory upgrade on Satellite Pro L40-15d
Hi
I have Satellite Pro L40-15d with 512 memory (Samsung) but I wont upgrade to 1GB. I have Kingston ktt667d2/1g I have tray to put in to both slots but nothing work I cant switch on computer.
But when I change for old one laptop is ok. What can I do? Install special program or update BIOS or maybe the memory stick is broken.
RegardsHi
The notebook doesnt boot after the memory upgrade due to these different issues;
- memory modules are not compatible together
- memory modules are not compatible with the notebook
- memory modules are faulty
- one of memory slots is faulty
In most case the memory module replacement helps.
One hint; did you try to switch the memory modules in the slots? Sometimes this helps.
Several weeks ago I have updated my memory and the notebook didnt boot.
I thought its a memory malfunction but after module switching the notebook booted correctly.
Good luck -
Memory upgrade on Satellite A50-104
I NEED TO FIND A 512MB MEMORY UPGRADE FOR MY A50/104 ANYONE NO THE CORRECT ONE TO BUY, I WAS TOLD ON EBAY THAT 512 DDR SODIMM IS THIS RIGHT. ALSO HOW DO I CHECK ON MY LAPTOP FOR THESE DETAILS IF THERE ARE ANY AND ANY OTHER SPEC BATTERY ,HARDDRIVE ETC
Hi
You have several ways to find out what memory module is compatible and supported.
You can use a diagnostic too like Everest, you will check the user manual or the Toshiba website for details or you will contact the service in your country for supported modules.
I will try to answer the question: The Satellite A50 should support PC2700 DDR-RAM like these parts:
PC2700 256MB (PA3311U-1M25)
PC2700 512MB (PA3312U-1M51)
PC2700 1024MB (PA3313U-1M1G)
Now its your choice. You can also google for the offers
By the way: Visit the Toshiba Options & accessories site. There you will find compatible parts -
Memory upgrade on Satellite Pro A40
Can anyone please advise where is the best place I can get a memory upgrade for my Satellite Pro A40 laptop.
I think my machine is a PC2700 DDR. I am looking for either 512mb or 1gb.
Thanks in advance.
ChristineHi
On the Satellite Pro A40 you will find 2 memory slots and you can upgrade the memory to max 2GB (2x1024MB)
It should be possible to use these modules:
PC2100 512MB (PA3164U-1M51)
PC2100 1GB (PA3278U-1M1G)
And
PC2700 512MB (PA3312U-1M51)
PC2700 1024MB (PA3313U-1M1G
I purchase the compatible parts and devices always form the Toshiba service partner in my country because so I'm 100% sure that this parts are compatible.
So I would recommend you also to buy the modules form the ASP in your country. -
Memory Upgrade on Satellite Pro A60
I have upgraded an A60 Pro with a 1GB memory up but the Control Panel /System/ General tab still shows it as having 192MB RAM. This limits me downloading some Security Software from BT Yahoo.
Can anyone advise on how I can make the machine recognise the new RAM or is the 192 MB RAM noted different memory from the new memory upgrade?If you use non-compatible RAM module it is logic that system can not recognize it correctly. I do not know who is the manufacturer of this 1 GB RAM module but if you want to use compatible one pick up some info about PC2700 1024MB (PA3313U-1M1G) or check Kingston web page.
-
Looking to upgrade Ram memory to 2gb on my NB300-108
Have looked at Toshiba website and the cost but there appear to be a plethora of alternative websites with compatible memory upgrades when I put in the part number.
Would welcome any experiences of the forum regarding alternatives etc
Thank youAccording notebook specification you can upgrade your NB to 2GB. I recommend you to use high quality module offered by Kingston. All info about it you can find here .
I have NB520 so I cannot tell you more about NB300. -
Memory upgrade on the NB550D-11D - 4GB RAM are possible
To anyone who's thinking about a memory upgrade on the NB550D:
The NB550D supports up to 4GB of memory, not only 2GB as mentioned by Toshiba in their specifications.
A memory upgrade to 2GB is _only limited_ by the pre-installed Windows 7 Starter OS, not by the netbook itself.
I'm using Linux Mint 11 Katya, 64bit and my system is running perfectly well with a 4GB ram module. If you want to use full 4 GB ram support, get rid of the Win 7 Starter OS.
The specification for higher volume ram is DDR3 1333MHz PC3-10600 SO-Dimm. I've chosen one 4GB module by Corsair, due to the 30 years warranty Corsair offers.
It took me quite a while to find this out, hope this is going to be a help to everybody who's just as unsecure as I was how to upgrade the NB550D memory. Good luck. ;o)> A memory upgrade to 2GB is only limited by the pre-installed Windows 7 Starter OS, not by the netbook itself.
I can confirm this. Two days ago Ive installed own Win7 32bit Home Premium and upgraded my NB520 with 4GB RAM. 3GB are in usage now and notebook runs perfectly.
With original Win7 Starter version I have noticed annoying display behaviour while watching action movies. When the scene in the movie was without movement everything was ok but by action scenes some strange lines were shown on the screen.
Now after own OS installation everything works perfectly and Im so happy with my NB520.
I can just recommend it for everyday usage.
By the way: I use 4GB SO-DIMM DDR3-1333Mhz PC3-10600
Maybe you are looking for
-
Zen V Plus 8GB: Can I set MORE than 4GB as storage for dat
When I bought the device, I thought I could choose to empty the entire player and fill it totally with DATA. to (for example) store a complete DVD (as data ofcourse, I understand the player won't be able to display it)
-
How to give grants on runtime objects
Hi, I have created read only apps user,but i want to have a trigger/procedure which should give grant at runtime when the object i.e synnonym/view created in apps user. I have tried the anil passi read only apps user-trigger but it is throwing errors
-
Problem with opaque object/text showing as semi-transparent?
I didn't start seeing this problem till today, but the past couple of times I've gone to create a new shape layer or text layer, it appears like it's at 50% opacity. I've checked my layer settings, and they're all at 100% fill and opacity. I can't
-
After updating my java plugin all my web pages look screwy?
I checked my plug ins to make sure they were up to date, and I updated the ones that werent. Now my webpages are missing a ton of things (color, advertisements, pictures,etc). Some of the text will overlap itself, and most web pages just list there f
-
How do you specifically let an Itemlistener know which Item was selected?
How do you specifically let the Itemlistener know which Item was selected in a JComboBox? Anyone has any idea? What should the coding look like?