Hp5510 black ink still not working after two cartridge changes and hard reset

Can you help?
Our 5510 does not print the black ink, we have tried hard reset, two new genuine black printer cartridges and it still refuses to play ball. All other colours print ok.
Thanks steve

Hello @Bigeady860,
Welcome to the HP Support Forums! I see you are running into some print quality issues on your HP Photosmart 5510, you are unable to print in black ink.
I would like you to continue here: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages, I understand you may have done some of these steps already but I need you to complete all steps in order to resolve the missing black issue you are experiencing.
Please note: There are three printhead cleaning stages. Complete all three stages if necessary. If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes after the last (third) cleaning stage to start the first stage of the cleaning process over again.
If you are still unable to print in black ink, I suspect the issue may be the printer and not the cartridge. Please let me know which Country/Region you are in as well as the product Warranty status: HP Warranty Checker
I hope to hear from you soon.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Similar Messages

  • B110a black in still not working after trying all recommended solutions

    Hi there
    Black ink still not working after spending many hours trying to sort. I've cleaned the printhead carefull several times (is immaculate now) and run the system clean up and alignment functions several many times too. I've cleaned the metal connecting points. I wiggled things carefully. I've attempted printing multiple pages in b/w in case it was going to take a while to get the ink flowing again. I've replaced one (expensive) new black cartridge with another brand new (expensive) cartridge and still nothing. This machine is probably out of warranty but seriously not very old. It really ought to be working okay. We use it regularly a little bit every week. Any ideas?

    The document here has troubleshooting steps that may help resolve black not printing on your Photosmart b110a.  Be sure to check the vents as shown in solution six, step three.  If the above does not resolve the problem the post here may help.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Both my cameras are not working I took it in and they reset the phone and it still continued to happen what can I do?

    Both my cameras are not working I took it in and they reset the phone and it still continued to happen what can I do?

    If a Restore of iPhone with iTunes on computer does not get it working correctly. Then it is hardware problem. Apple with handle this with Replacement iPhone 4S exactly same as yours for $199. If there is any hope at fixing this otherwise, first step would be to replace the front (facetime camera) first. See if both cameras function after this. If not, if there is any fix possible it will be very difficult. Replacement iPhone may be best plan.

  • My brand new iPad mini won't rotate I have done factory reset still not working. If I lock and unlock on landscape or portrait it remains in that mode. Any ideas pretty sure I've tried everything suggested.

    My brand new iPad mini won't rotate done factory reset still not working. If I lock and unlock on landscape or portrait it remains in that mode. Any ideas pretty sure I've tried everything suggested such as off/on, reset, reboot, double checked lock off. It did work and I changed wallpaper and stopped motion, not sure if this related

    Reset all settings. Settings>General>Reset>Reset All Settings. Your iPad will reboot on its own. You will have to enter all of the device settings again, but no data will be lost.
    I eould not spend a whole lot more time trying to fix this, if the device is really brand new. I would take it back to where you bought it, bring the box, the charger, the cable and your receipt and if they can't get it fixed, return it and get another one.

  • Black Ink is not working - 3525 model

    My black ink wont take on the paper, I have checked all my ink levels, they are all full. I have done several printhead cleanings, and I put the nozzle in hot water for 5 minutes, it is still not working. The other three colours take on the paper, its just the black that doesn't take. Please help me.

    Hello @Zoëtte,
    Welcome to the HP forums.
    I understand that your 3525 is not printing black ink.
    I would like to help.
    Try going through the following document.
    Fixing Print Quality Problems for the HP Deskjet 3520 and HP Deskjet Ink Advantage 3520
    If the printer is still not printing black, try this document.
    Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Deskjet Ink Advantage an...
    If you are still having a problem I would call technical support.
    Please call our technical support at 800-474-6836.
    If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • Creative zen V+ still not working after coming back from assistance for the second ti

    hallo, what thje hell is happening with creative Zen V+ I got it back from assistance for the second time and it's still not working!!!!!!!!!!! I want my money back now, I'm gonna spam the whole of the internet with this unfunny joke, what the hell I'm suppoised to do I really fed up, since I bought the unit it worked for less than one month and for another one it's been back to the assistance for two times!!!! And still it's not working!!!! Now let me tell you this creative zen V + is a worthless, costly, cheap piece of crap, and I mean crap, what the hell am I supposed to do now Send it back for the third time 249 euros for this crappy piece of cheapo plastic Please is it allowed me to send it back and having in change some olther player I don't mean it to be trendy or flashy or all of the usual marketing **bleep** coming with these, I just want a player that actually play my music, a player I can load all my music without the application to freeze, the player to freeze and me having to format and reboot again and again. Is it creative capable to accomplish such task, do they still know how to build an mp3 player that actually work without me having to buy and install windows vista Or they don't Do creative have some old player still in stock zen touch wasn't stilish but worked well until the HD dyied, zen V plus isn't working as it is supposed to do, plain and simple. What do I have to do now in case you are wondering the malfunction is still the same.

    For the Zen V, as it states on the box, you need Windows XP Service Pack or 2, or Windows Vista. You also need Windows Media Player 0 or . As long as you have that, you should be fine there.
    You may also have a corrupted file that is causing the problem. Try not transferring them all at once, transfer it in blocks instead. If one block fails to transfer, try and narrow it down and see if it's a specific file in that block causing the problem.
    When you try it on another PC, do be sure that PC meets the system requirements, especially the Service Pack if it's Windows XP. You'd be shocked how many times people try it on a 2nd computer, get angry when it doesn't work, call tech support, and find out the 2nd PC doesn't even have SP on it.
    All else failing of course contact Support. They can't help you if you don't let them know what's going on, and if you don't yell at them they'll do their absolute best, trust me.
    Good luck,
    Dale

  • HT5622 My facetime is not recognizing my Apple ID.  Reset it and still not working (on two Ipad devices).

    my Facetime is not working.  Reset my passwords and tried on two ipads and still not working.  It both worked two weeks ago.  What am I missing?

    Try this. Go to Settings>FaceTime >Off. Reset the iPad and then go back and turn FaceTime on again. See if that fixes it for you.
    Reset the iPad by holding down on the sleep and home buttons at the same time until the Apple logo appears on the screen. Ignore the red slider bar if it appears.

  • Iphone 4s camera still not working after replacing and restore?

    I bought phone with back camera not working so first i done a restore and update to no avail, then done a restore as new phone still no joy, so i decided to buy new camera which i fitted no problems but its still not working? what else can i do as there is no warranty on the phone?

    Find a third-party repair shop with experience in fixing iPhone cameras. Apple won't help you.
    Be aware, since Apple does not sell iPhone parts, there is no legitimate source for such, & many on the market are counterfeit.

  • Flash still not working after enabling it on windows 8.1?

    I followed the instructions on the help section and enabled flash, however it is still not working. I then tried to download it and the page takes me to the instructions on how to enable it.
    I have just bought a  new laptop and it is fully updated with 8.1.
    Any help would be appreciated.

    Flash Player is actually built into Internet Explorer on Windows 8 and 8.1.  There is nothing for you to download or install from Adobe.
    From the description of the problem, it sounds like you're going to a website and getting a message that Flash Player cannot be found.
    On most sites, there is JavaScript that determines what version of your browser and Flash are installed, so that it can determine what content to show you.  In Internet Explorer 11, Microsoft changed the string that identifies Internet Explorer to those scripts, and it's very likely that the website you're visiting needs to make adjustments to accommodate the change.  There will probably be a bumpy transition period as major web properties notice the problem and fix it.
    In the meantime, Mike's suggestions are good.  Use Compatibility Mode or an alternate browser.  You may also want to contact the website (particularly if they're a small shop) to let them know about the problem.  You're on the early end of the adoption curve, and they might need a head's up.
    Thanks!

  • My wi-fi on my iPhone 4S is not working after updating to ios7 and is a few weeks out of warranty, the Apple store wants me to pay £160 for a new one, are they joking?!

    My wi-fi on my iPhone 4S is not working after updating to ios7 which was working perfectly fine before. It is a few weeks out of warranty now and the Apple store wants me to pay £160 for a new one, are they joking?!

    Hi there Juicy Guava,
    You may find the troubleshooting steps in the article below helpful.
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    -Griff W. 

  • Password not working after ID name change?

    Hi, I changed my Apple ID to correspond with my new email address, and when I did the password for the account stopped working on my iPhone even though I only changed the account name, not the password. So I changed the password (they made me use an uppercase letter and eight characters, whereas before it was simply six lowercase letters - what's up with that?). The new password is still not working. Can someone tell me what I'm doing wrong?

    go to settings>store>sign out and then sign back in with correct info. they made you change the password for your safety, they had everyone make their passwords like this now

  • Black ink is not working well.

    I bought 61XL size ink few weeks ago. It worked out pretty good until yesterday. When I was trying to print out something, it showed so blurry. I shaked, tapped the cartridge, but it still doesn't print clear. Please response me asap because I need to print everyday. 

    Hello @Zoëtte,
    Welcome to the HP forums.
    I understand that your 3525 is not printing black ink.
    I would like to help.
    Try going through the following document.
    Fixing Print Quality Problems for the HP Deskjet 3520 and HP Deskjet Ink Advantage 3520
    If the printer is still not printing black, try this document.
    Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Deskjet Ink Advantage an...
    If you are still having a problem I would call technical support.
    Please call our technical support at 800-474-6836.
    If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • Flash player still not working after following all discussion advice

    Requested information:  I have Internet explorer 9/ using 32 bit on 64 bit computer/windows 7/flash player 10.2 version
    I contracted what my husband called a "rider" virus when I opened a knitting pattern of all things and if I understood it correctly was one of the anti-malware viruses talked about.  My husband was able to remove the virus but like others have said here, my flash player will not work.  My computer is only 3 months old!
    Here is what we have done:
    1: First removed all flash player and shock wave
    2: I have run a full scan with my Mcafee program, then ran a full scan and quick scan too with my malwarebytes program.  Everything in both is now clean.  I then rebooted (I also even tried doing all of this in safe mode too with nothing changing)
    3: came online and read a bazillion threads about others problems and tried every suggestion pretty much including those below
    4:  husband checked the kill bit (d27 thingy) and it was not there
    5: reinstalled flash player and shock after running the scans and though they show up in my programs when I looked at the add ons as suggest to others the
    neither shockwave or Flash Object was there
    6: uninstalled everything again
    So now I am back to where I started with nothing installed because I still have an issue and we don't know what it is.  I truly appreciate your help in any way as it is frustrating that none of the other suggestions have helped.
    this may not as my grandma used to say have anything to do with the price of rice in china, but we do keep getting a short freeze up on the computer followed by a message that the display driver stopped responding and recovered then it works again, but it does happen fairly frequently and this has been since the virus.  I am showing everything is clean though with regards to virus scans and malware spyware scans.

    Just when I thought I would finally find the answer you sent a message offline, which didn't help me a bit.
    I have the same problem.  My wife got a virus and I was able to uninstall it by poking around.  After killing the virus IE would not run.  I found some messages on the internet which enabled me to solve that problem by making some registry changes.  However, I still have not been able to get IE to run flash.  I do have it running in FireFox.
    What was the step that you sent in private email that enabled him top solve the problem?
    Thanks

  • Headphone Jack STILL not working after hardware replacement

    Can someone help me, my headphone jack stop working suddenly from one day to another, it only plays the left channel. I took it to repair store and they changed the whole headphone jack hardware for a new one and it still has the same problem, I thought it was matter of restoring it so it could accept the new hardware but still the same issue. What should I do?

    I had the same problem and chatted with tech support and they told me to reset the PRAM and SMC which did not fix the issue.  After contacting them a second time I was told my computer needs to be repaired.  Which is not the problem it is a software issue.
    What finally fixed it was (this was done after resetting the PRAM and SMC):
    * Note: you can try this first and maybe it will solve your issue if not reset the PRAM and SMC then do the following.
    1. Open system preferences
    2. Chose sound
    3. Chose Output then headphones
    4. With headphones plugged in I checked the mute box on the bottom right and unchecked it they worked.
    Then when unplugged the speakers didn't work so I did the same but choosing the internal speakers
    OS X Mavericks: Reset your computer’s PRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    Hope this helps others!!

  • Purchased adobe acrobat x serial number does not work after two computers i need it put on a third computer help

    I purchase adobe acrobat x   I put it on two computers in my office I need to put it on one more but the serial number does not work anymore   is there a way to put it one the third computer?

    Also, you can only use it on two computers if they belong to the same person, are used only by that one person, and are not used at the same time. To install on two computers for two people needs two licenses. Adobe sell volume licenses, but do not sell an "all the computers in the office" license.

Maybe you are looking for