HP6110 printer connecting to wireless router USB port

I have an HP Officejet 6110 all-in-one printer, a Toshiba laptop running Windows 7, and a Hitron wireless Router CGN3ROG.
I am trying to get the printer on to my home network by plugging it into the USB port on the router. I cannot get it to work. Has anyone succeeded in doing this?
Derek
This question was solved.
View Solution.

Hello @Derek_W,
Welcome to the HP Forums!
I understand you're trying to connect the Officejet 6110 to your home network by plugging a USB port to your router. I will do my best to assist you! If this is your printer here, you cannot do this. You have to use a USB cord to your printer and computer. I will provide the Manual here. On page 55, explains on how to connect your printer.
If you have a different model number, then please let me know. If you have any further questions let me know as well. Have a great night!
I worked on behalf of HP.

Similar Messages

  • Printer connected to Airport Express USB port won't come online after firmware 7.6 upgrade. I've tried backing up to 7.5.2, but it still shows offline. It is a Canon iP4600 printer and I'm running OS 10.6.8. I've powered everything down and still no go.

    Printer connected to Airport Express USB port won't come online after firmware 7.6 upgrade. I've tried backing up to 7.5.2, but it still shows offline. It is a Canon iP4600 printer and I'm running OS 10.6.8. I've powered everything down and still no go. I've connected the printer directly to my MacBook's USB port and it works fine. Any suggestions?

    I have an iP4500, which I assume is quite similar to your model.
    I had to reset the printing system to get things printing again. Only takes a few minutes and no problems at all since I did it a week ago or so.
    Plug the printer into the USB port on the Express and restart the printer.
    Open System Preferences (gear icon on the dock) and then open Print and Fax
    Right-Click in the printer area on the left and select Reset Printing System
    Then click the + (plus) button at the bottom of the printer list to install the printer again.

  • 9100EM Wireless Router USB port

    Hi all,
    Recent FIOS install.  I noticed that the new router has a USB port on the side of it.  At this point I have not tried making a connection to it, but rather only read the manual.  There is almost nothing in the manual about it.
    "Connects the Router to peripheral devices (e.g. storage) via USB. Note: This port may not be enabled in all UltraLine Series3 units"
    Is about all I can find.  So my question(s)...
    1.  How can I check to see if it is enabled?
    2.  If it is enabled, can it be used for an external networked drive?
    3.  Similarly, can it be used for a network enabled printer?
    Thanks for any help.
    Solved!
    Go to Solution.

    As of right now it doesn't do anything. Don't know if or when they plan on enabling it.

  • Printing from iMac using bonjour to a printer connected to netgear wifi router USB port

    Wondering if someone could help provide advice. I have just purchased my first iMac and a new NetGear W600 wifi router. I have connected my Canon multifunction MX310 printer directly to my iMac and it prints and scans perfectly. However when I connect it to the USB port of my new NetGear W600 wifi modem the only thing I can print is the test page on the iMac, ... nothing else prints. I receive the message that my iMac has connected to the printer but nothing prints out, except the basic test page.
    In stark contrast, when I install bonjour on my Dell notebook PC, running Vista, it prints perfectly to the same MX310 printer connected to the NetGear wifi router!

    Hi, Thanks for your help. I am trying to get documents printing to the canon printer in wifi mode, via bonjour, when the printer is connected to the USB port of my NetGear wifi router. I have a wifi internet connection via the same NetGear wifi router so it doesn't seem to be a network connectivity issue. ... any other ideas?
    Many Thanks
    John

  • HP Officejet Pro 8000 Wireless: HP printer unable to connect to wireless router.

    Installing new printer,  getting error msg saying HP printer unable to connect to wireless router.   MAC address filtering may be enabled on your wireless router which can prevent HP printer from connecting to your wireless network during setup.
    SOLUTION says:  If MAC address filtering is enabled and you would like to keep it enabled, you must add the MAC addressof your printer to the list of permitted devices for your wireless router before continuing.
    My router is WD My Net N900 Router. MAC filtering is diabled. My security mode is WPA/WPA2 Personal. 
    I have run out of ideas to try and fix the issues, would appreciate some help.
    Thanks,

    Hi Jamshidk
    I am surprised you are getting that message and you checked the router settings and it is showing that the Mac Filtering is disabled.
    I would suggest connecting the printer to the router with a ethernet cable to get a valid IP address and then setup the wireless.
    Print a configuration report.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&​dlc=en&docname=c01554589&lc=en&product=3760410&tmp​...
    Type the IP address from the configuration page  in the address bar into internet explorer browser. This will open the embedded web server for the printer. Click on the Networking tab, on the left hand side select wireless. After this is setup and applied, disconnect the ethernet cable.
    Should be on the wireless network. Takes about 1 minute.
    Run the add printer wizard.
    Go to start, devices and printers and select add a printer. (Win 7)
    Test the printer.
    If you need more assistance just let me know.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • I am trying to connect my Photosmart Printer to my wireless router

    I need to get directions on how to connect NETGEAR wireless router to HP Photosmart printer.

    Hi,
    What is your printer ? And what is the Operating system of your computer ?
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Windows 7 does not detect & install HP Colorlaser 2600n printer connected to wireless network

    I have an HP Colorlaser 2600n printer connected to a router set up for my wireless network. I have tried to installed the printer through the wireless network, as I have done with other computers, but my new HP dv7 laptop does not find the printer in the network. Just to check, I installed the printer directly to the laptop through an usb connection and it work, but nothing I have tried has work to access the printer through the wireless network. If I use HP installation CD and check network installation, the setup program does find the printer, but once I finished, the printer does not appear in "printer and devices". Any suggestion on how to solve this situation? Thank you in advance for your help!!

    Download and run this: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-92​6&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju​...
    Your security system's firewall is likely in the way.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Is there a way to make Time Capsule back-up its contents to an external hdd connected to it's usb port.

         I wanted to know if there is anyway i could automatically backup my time capsule to an external drive connected to it's usb port. I tried using automator to make it copy newly added files into the external but it didn't seem to work as i had hoped and i wanted to know if anyone had any experiences in using other programs to copy the contents of one folder in the TC to another folder in a drive externally connected to the TC and also keep the contents of both folders up to date.
        In short, I am basically trying to make a "raid 1" and i know that TCs dont support raid natively so thats why i asked if anyone knows of a program that could do it from the mac side.
                                                                                                         Thanks.

    Carbon copy cloner might work.. expect it to be very slow.. especially if you are using wireless.
    There will be various rsync shareware available.. but like your experience getting it to actually work is loads of fun.. or NOT.

  • Envy5532 - both PC and printer connect to WiFi router/network, but can't print from PC : (

    I have a new Envy 5532 and I want to print from my Windows 7 Pro PC via my wireless network/internet router.
    The PC is connected wirelessly to the internet through the router. The printer connects to the router/network without any problem. The printer also connects DIRECTLY to the PC wirelessly, and I can print from the PC if I disconnect from the router/WiFi network.
    So the router comes up as a network on the PC, and the printer comes up as a different network. But I can only print through the direct connection, which means I can only print, not scan. Also, it means I have to disconnect from the internet in order to print.
    I have run all diagnostics, installed the drivers, etc. but it seems to be a dead end.
    Any advise? Many thanks.

    Hi @DrivenDementet,
    Welcome to the HP Forums!
    I see that you cannot print from your PC to your HP Envy 5532. I am happy to help you with your printing!
    Please see the following guides:
    'Printer is offline' Message Displays on the Computer and the Printer Does Not Print: Windows 7. (This guide will help you get online and printing).
    Printer Does Not Maintain Wireless Connection. (This guide will help you maintain the connection).
    On top of the guides, I would also recommend this website, HP Wireless Printing Center, as there is some good information on wireless printing.
    it is also very important with wireless printing that the PC and the Printer are on the same wireless network, otherwise they will not be able to talk to each other.
    Hope this information clears things up for you, and have a great day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Trying to connect Verizon wireless router to Airport Extreme but error says Ethernet unplugged.

    Trying to connect Verizon wireless router to Airport Extreme and error says Ethernet Unplugged.

    So, AirPort Utility running on the Windows Vista desktop can "see" the AirPort Extreme and displays its icon, but gives that error message at some point in the setup process? How far does it get?
    Other questions that may help me (or somebody else) understand your problem better:
    Which of the pieces were verified as working before the introduction of the AirPort Extreme?
    Did you have the desktop computer attached to the Verizon GT704WGB with one of the Ethernet cables you are now trying to use? Which one? Have you tried the other one to be sure it also works?
    Are you using the same port on the GT704WGB? Have you tried another one?
    If the desktop has multiple ethernet ports, are you using the same one?
    Had you done any special configuration of the ethernet port on the Verizon GT704WGB to get it to work with your desktop?
    What category ethernet cable are you using? 3? 5? 5e? 6?

  • I am trying to use an external 3g modem made by Huawei model e173s-6 and when I do connect it on my usb port the macbook pro just do not recognize it. I own a 2012 model with mountain lion 10.8.2 . What should I do ?

    I am trying to use an external 3g modem made by Huawei model e173s-6 and when I do connect it on my usb port the macbook pro just do not recognize it. I own a 2012 model with mountain lion 10.8.2 . What should I do ?

    I still don't know what happened to my test Aperture Library after the update to 3.4...Not only were my previews lost, but so were the original images!  Needless to say, I haven't bothered to update the main library on the Mac Pro because I don't want to deal with this level of uncertainty (even with backups in place).

  • My 1st gen iPad is not recognized by my PC, my iMac or my macbook.  it's charged, connected directly to the usb port, shows the connect to iTunes screen,  but is not in the device list on the pc or iTunes??  I have reset it repeatedly, and rebooted???

    I am conneting my Ipad to mutiple Pcs, (windows and Mac) and it is not being recognized in the device list on itunes or the computers.  the ipad is fully charged, I have reset it numerous times and it gives me the apple icon and then the "connect to itunes" message.... but dose nothing after that.  I had it all set up and gave it to my daughter who tried to sync it with her macbook when it did this.  We are using direct connections to the computers usb ports, the cables are new, ituens is newly updated on all pc's...
    any ideas what the problem is??

    Did you already have a look at this article?
    iOS: Device recognized in iTunes for Mac OS X

  • Is it necessary to be connected to wireless router/ap to upgrade firmware of WRE54G V1.0 ?

    Is it necessary to be connected to wireless router/access point to upgrade firmware of WRE54G V1.0 in order to support universal repeater mode ??? Please let me know with full details what should I do in order to upgrade the firmware but without stay connected (in range) of a signal of a wireless router ot an access point. Thanks. 

    neighbour_devil wrote:
    Hey mike,
    the static IP of 192.168.1.5 has to be assigned to one of the wireless PC's that you have....make sure that you assign the static IP to the "wireless network connection" . once you have done so....check if you are able to see the SSID of the WER54G..connect to that SSID...and then try to ping 192.168.1.240 from the command prompt...if you get replies...then try to upgrade the firmware.
    Can someone walk me through the steps of assigning the static IP to the "wireless network connection" referred to in the last post? I would assume you would right click on My Network Places, then right click on the "wireless network connection", but give me the steps after that. I don't want to screw anything up. Also, is it necessary to turn the router off, or can I just temporarily disable the connection on my laptop?
    Thanks,
    ~MaxMessage Edited by maxrich on 08-18-2006 06:30 AM

  • Bought iPhone 6 yesterday. Also bought dock works with iPhone 5/5s. And cord connecting iPhone 6 to USB port on car stereo. No sound comes out of dock or car stereo. In store today, iPhone 5 running ios 8 worked on dock, not iPhone 6. When Apple fix?

    I bought an iPhone 6 yesterday. I also bought a stereo dock that works with iPhone 5/5s. And a cord to connect iPhone 6 to USB port on my car stereo. No sound comes out of the stereo dock or car stereo. In Best Buy today, Sales Associate tried his iPhone 5 running iOS 8 on a stereo dock. It worked, but my iPhone 6 didn't. When will Apple fix this problem? Or is Apple pushing everyone to Bluetooth?

    The iPod feature that plays through USB in my car does not work with my iPhone 6 either.  I called AppleCare and they said that the car audio system will need a firmware update.  Don't know if Apple is just passing the buck, but that is what I was told.  Thank you for posting.  I know now that I am not the only one.  Thanks also for posting about the iPhone 5 running iOS 8.  I gave away my iPhone 5 to a friend so I wasn't sure whether this is an iOS 8 issue or an iPhone 6 issue and your experience seems to confirm that it is a problem with iPhone 6.  I guess I will just be using Bluetooth in my car, at least for now.

  • My Ipad and itouch cannot be connected ti wireless router tried changing setting still cannot connect

    my Ipad and itouch cannot be connected ti wireless router tried changing setting still cannot connect

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

Maybe you are looking for

  • How can I see   more than one text line?

    Can anyone help me?? I know to write more than one line in a HstaticText with the following code label = new HStaticText("This is some text.  It's a fairly long " +                                 "\npiece of text that should show \nword wrapping on

  • I am trying to install Oracle 9i on Windows Server 2008

    Hi I am trying to install Oracle 9i on Windows Server 2008. While installing third CD it shows the following error message "jrew.exe has stopped working" Please guide me what to do next as early as possible. Thanks

  • Adding Generic Object Services attachments to PRA trans O3U_DO3

    I would like to add the generic object services attachment menu that is found in vf02 - invoice create to the production and revenue accounting module transaction O3U_DO2/O3U_DO3 Maintain/Display DOI Owners.  I need the ability to attach external doc

  • Oracle raise ORA-03113 when connect to a remote oracle server using toad

    Hi there, when i use the tool toad connect to a remote oracle server which located in a different city, when i submit a query in toad, if the query returns many rows of data, it will raise the error ORA-03113:end-of-file on communication channel, how

  • Basic Apple applications won't open on Mac Pro after Mavericks upgrade

    Hi, I'm having issues opening a number of basic applications including Quicktime and Itunes Through the App store I have updated everything, the last one I was holding out on was updating Itunes. I did that last night and now today Itunes won't open.