Hp7280 all in one printer air print

just acqired ( xmas present!) Ipad . Says i can use Air print . I print via wireless off desk top should i be able to use " air print" whatever that is to print from my ipad ....70+ so any help welcomed ....all else fine !

Hi,
The C7280 does not provide Airprint capabilities.
However you may still print by using the HP ePrint Home & Biz app.
Follow the steps below to find how to get and use the app:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02775166&cc=us&dlc=en&lc=en&product=3204785&tmp...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

Why can't i print wireless using hp7280 all in one printer

I use the HP 7280 all in one printer/ copier. I can not print wirelessly from my HP pc to printer. I need some very basic help. thanks. works fine on usb port.

Hi,
Please watch the setup from the following video:
http://www.youtube.com/watch?v=9ZPzu1tUSiE
You can find more info from the following link:
http://www.ehow.com/how_4812438_troubleshoot-hp-c-wireless-printer.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Installed a new harddrive in my macbook pro. cannot connect to hp photosmart all in one printer!!

I, recently, installed a new hard drive on my MacBook Pro Laptop Computer (2007 model).
Now, I cannot print out anything on my HP Photosmart C7180 All-In-One Printer! They don't
seem to be connected, as the printer icon shows up on my computer, and then, immediately, evaporates
into thin air.
How do I connect my HP Printer to my laptop, now that I have a new harddrive installed?

Hello Lady22:
When you received your printer you should have received two insulation disks one is for Windows computers and the other one is for Mac ( Apple Computer) If you have the disks please install Mac disk. Apple computers do search and down load the parcel software so you can do basic printing commands. You need to find the program that is some where in your computer that allows you to hook up Pinters and Devices. Ounce you find this open it up then connect the printer cable to the lap top. The computer program will list HP's printers yuo need to select your printers model number. Then it will down load the drivers for it to run basic commands. Ounce they are download run a test to make sure it is working right. Contact HP's store and asked them to send you a new set of insulation disk. Your old disk may have fine dust film on them. Clean them off pior to inserting them If you use glass cleaner and fine cloth make sure they are dry off before you insert them. If you used them before maybe a speck of dirt blocked out parcel program that caused it not to install correctly . frrw

I have an HP Officejet 7210 all in one printer, have loaded Printer Pro to IPad, get successful test pages in the Print Pro App but can't print emails (or anything). error message is No AirPrinter found. How can I get connected?

I have an HP OfficeJet 7210 all in one printer, have loaded Printer Pro and had a successful test while in Printer Pro. When I try to print and email I get NO AIR PRINTER message, How can I connect my printer to my IPad and print emails.

Welcome to Apple Support Communities.
If you're using the Printer Pro app, you're not going to use AirPrint services.
They are not the same thing.
Are you using the 'Open In' option to get the email into Printer Pro for printing?
http://itunes.apple.com/us/app/printer-pro/id393313223?mt=8
Once installed, Printer Pro appears in the "Open In..." list on your device. This lets you print documents from Mail, Safari, ReaddleDocs and many other applications on your iPad that supports this function.
Using "Open In..." approach you can print files from many popular online storages: Dropbox, MobileMe iDisk, GoogleDocs. It just a matter of several taps to download your file via free Dropbox, iDisk or Google Docs application and send it to printer.

HP Photosmart 2610 All in One Printer Paper feeds OK but the software and sensors are a problem

HP Photosmart 2610 All in One Printer Paper feeds OK but the software and sensors are not allowing paper to feed until several steps are taken first.
(I am using Windows 7. I also use the virtual XP mode and mostly MS Office 2003 docs).
I have had this printer for several years and love it. Before I toss it out, I thought I would check if I could get it to work properly before I buy another printer. Note: I did put in a new HP black cartridge (because it was out of ink) but the printer was not working properly for several days before I changed the cartridge. The printer was at step 5 before ink change.
Lately, each time I turn on my printer, I have to go through the same routine
1. The printer wants to align the cartridges so I push OK
2. The paper feeds into the printer and stops at the exact place to start printing.
3. Error message appears that it is out of paper. So I press OK to continue.
4. It says "aligning print cartridges" runs through 2 sheets of blank paper without trying to do anything and then states "cartridge alignment failed" "Press OK to continue"
5. Screen is now normal and it appears it is going to work.
6. It makes no difference if I used the copy function OR when I send a print job from the computer, the paper feeds into the printer and stops at the exact place to start printing but nothing happens.
7. Error message appears that it is out of paper. OR that it is the wrong size paper. I pull the paper that was at the proper place to be printed from the printer and then the error message says "Paper jam. Press OK to continue"
8. I press OK. The printer will then quickly feed in and eject 2 sheets of paper before it will actually start printing the print job. It will work fine after this as long as I print from the same document.
9. If I want to print a different document then I have to start all over again at step 6 to get the printer to work. If I shut the printer off I have to go back to step 1.
What I have already tried
A. Uninstalled and reinstalled the printer driver direct from HP web site. I have done this several times with both the basic driver download and the complete package download.
B. I have done a partial reset by unplugging the printer, and then re-plugging the printer while pushing the "# and 3" buttons while turning on the printer. I have done this several times. Each time it will work fine until I try a different document of turn off the printer.
C. I have downloaded the HP Print and Scan Doctor and used it several times. It states that "everything checks out OK"
D. I have downloaded the HP Hardware Diagnostic Utility 4.0 but it does not work with my printer.
E. I have cleaned all the rollers and blown air throughout to make sure there were no bits of junk in the paper's path or blocking a sensor.
F. I have tried different brands and weights of paper (all 8½ x 11) but nothing works.
Most of the problems started when I added the printer to the virtual machine so I could print XP files. This may just be a coincidence because the printer has the same problems when I use the copy function without the computer being on.
Thanks for looking at my issues. Any help would certainly be appreciated.

I just tried using Notepad as you suggested and had the same result. Paper feeds in stops at proper place and error message "out of paper"
I just put in two new HP ink cartridges because the other two were low and I was told that this might be the problem.
I seem to remember that the HP 2610 shows 2 "ink icons" in the lower left corner. One for black and one for color. The ink icons would change from completly full to just an outline as the amount of ink went down. Currently the black ink icon is missing
This is a very frustrating problem because the printer works great after doing a few steps to get around the problem. The fact that the problem reoccurs any time anything is changed is the major problem
Most of the problems started when I added the printer to the Windows 7 virtual machine so I could work with Windows XP programs. This may just be a coincidence because the printer still has the same problems when I use the copy function without the computer even being on.
I want to thank you for all of your efforts. Perhaps this is a unique problem that will never be solved and it is best to take my losses and buy a new printer. As a last chance, if possible, could you refer my post to someone who is an expert with the HP 2610 printer.

HP 3520 All-in-One Printer Falls Out of Wireless Network Periodicially

We have an ongoing problem with our HP 3520 All-in-One Printer. We set it up for wireless printing and it works....for a while. Periodically, we find that it falls off the wireless network and will not print except when plugged into the USB cable. The problem is that my husband has an Ipad Air as his main device which he cannot plug into the printer and needs to have wireless working...and the main reason we bought this printer was to have wireless capability. We *think* that it may be falling off the network when we have a brief power outage or Internet outage, which happens occassionally for a short time. Also, on my laptop, although the wireless set-up to this printer has worked in the past, now I see that I can either connect my laptop to the Internet network OR the printer, but not both at the same time. How strange is that?
I have printed out the Wireless Network Test Results AND the HP Network Configuration Page, in case that information can be useful as we attempt to troubleshoot this problem.
Note that the printer is no longer under warranty.
I have reviewed numerous HP product support pages and feel as if I am running in circles. The help information is confusing to us and we have spent so many hours trying to troubleshoot this issue that my husband has completely given up on that printer and I am doing my best to try to save it since it is only about a year old.
We appreciate any help you can give us to remedy this ongoing problem.
PSCo

Hello there PSCo, Welcome to the Forums! I hope you enjoy your experience
I saw your post about your Deskjet 3520 dropping the network connection. It very well could happen if the power goes out or Internet disconnects. I have found a troubleshooting guide that is geared to help repair the wireless connection disconnecting. It will go further into detail about the causes and things to do to help.
I hope the steps work for you!
Printer Does Not Maintain Wireless Connection
Thanks for posting, enjoy the rest of your day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

After upgrading to mavericks how can I connect my HP PSC 2510 photosmart all-in-one printer to my mac?

After I upgraded my macbook air to mavericks, my HP PSC 2510 photosmart all-in-one printer doesn't connect to my macbook air. When I try to launch the all-in-one installer from the HP CD that came with the printer, I get a message saying it cannot open because powerPC is not supported. The HP site has not been helpful in resolving this issue. My understanding is I first must connect the printer to the wireless system (I use airport extreme) before using airplay for printer software upgrade.

Your suggestion is helpful, but after some digging on the HP site I found a detailed solution to my problem. The link is: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01749025&tmp_task=setupCate gory&cc=us&dlc=en&jumpid=reg_r1002_usen_c-001_title_r0001&lc=en&product=303770

HT2693 Kodak All-in-One printer and Airprint?

Can a Kodak All-in-One printer run with Airprint? Is there a device that adds Airprint and Airplay to devices that do not have that feature?

Kodak does not appear in the list of Compatible Air Print Manufactuers in the following link:
AirPrint Basics.
http://support.apple.com/kb/ht4356
With that said, there are several alternatives both software and hardware based to give non Airprint compatible printers the ability to be used by iPads, iPhones and other iDevices.
If you are running a Mac Pc you can look into Printopia
http://www.ecamm.com/mac/printopia/
If you are more interested in a hardware solution look into Air Print servers such as:
http://www.lantronix.com/it-management/xprintserver/xprintserver.html

All in One Printer no longer scanning (C5280)

I have an oldish printer/scanner that was working fine until I downloaded the update that came from HP on Aug. 13th. Since then, I cannot scan. I got an error message that the machine was disconnected from the computer which made no sense since I can print from the computer just fine. I did all the things the error message suggested: rebooting, disconnecting the cable, redownloading the driver. The machine worked for about 5 pages of the scan after the redownload, then conked out again.
I saw some directions about going into the registry editor window but they were for Windows 7 and below. I have Windows 8. I did not see a folder for Digital Imaging in the HKEY_LOCAL_MACHINE/Software/H-P
If there are updated directions for Windows 8, pleae let me know.
I have an All in One Printer (C5280)

Hello @Toonces , and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing scan issues. I would like to try and help.
I would suggest Uninstalling the Printer Software.
Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration. You can do so by following this document: How to perform a clean boot in Windows.
Once the computer is in clean boot mode, I would suggest reinstalling the HP Photosmart C5200 All-in-One Printer series Full Feature Software and Driver.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Hp officejet pro 8500 premier all-in-one printer

The above printer is 1 1/2 years old and it has stopped printing. When the printing became light, I installed new print cartridges less than a week ago. Now, after five days, the printer is consistently cleaning the print heads and aligning the print heads and my documents are not being printed. And, what is most frustrating, during all the cleaning and aligning, all of my new ink is gone and I'm receiving a message replace ink cartridges.
Re: Problem with HP Officejet Pro 8500 printer: cleans printheads every time it's turned on
Options
08-24-2011 06:34 PM
Well,
to this is say, "get used to it", or throw it away. Many, Many, Many people have had trouble with this printer.
The following are common and frustrating issues that this printer exhibits on a regular basis:
1. Constant Self-Checking (usually every 20-30 pages of print)
2. Very persistant Printhead Cleaning/Checking, (Every startup and after about 20-30 pages printed).
3. Worn-out printheads (usually within 1,100 to 1,500 pages printed).
4. Paper mis-feeds.
5. Paper jams.
6. Nearly impossible to use once the printer reports ink-depletion.
7. Nearly impossible to use CIS Ink for larger print jobs.
8. Ink and printheads "expire" regardless of when they are placed into service. (get a deal on ink or printheads last year? Too bad, the warranty is already expired, most likely).
In short, this printer is the most EXPENSIVE printer I've ever owned, and the most frustrating to use.
I have just over 2,000 pages of regular text printed matter with very little color, and have already gone through 4 sets of ink, and 2 sets of PrintHeads.
Although it's true that you can leave the unit on, and let it go into standby, you should NOT be punished with constant and time-consuming "self-checking" everytime it's turned on, or prints a handful of pages, BUT, it does NOT appear that HP will be standing behind this printer disaster. AND, to make things worse, they've gone on to redesign it, giving it a different look, and so there are about 6 different models/versions of the OfficeJet Pro 8500.
Anyone needing a reliable print/fax/scan/copy solution should look beyond this printer, because it will leave you wanting more, and spending more than you ever imagined you would have to on a late model printer.ro
What is going on? Why does it just automatically clean and align? I also get alignment failed messages. Any suggestiions?

rammerjammer,
Thank you for bringing this to my attention, your feedback is very important and I want to do my best to help. To answer what is going on, since the printing became light, started cleaning itself constantly, and fails the alignment, the printhead was damaged. Click here to see and use the Limited Warranty for HP Ink Cartridges, Printheads, and Related Supplies. There are many ways to contact HP. The number to call is 1-800-474-6836 for HP and Compaq products for Home & Home Office use. If you no longer have a warranty with the printer you can still use the warranty that comes with the printhead or ink cartridges.
If you have a carepack with the printer that extended the one year warranty then the troubleshooting will be covered along with the printer if the printer needs replacing. Check product warranty here, see HP Out of Warranty Support Options for Select HP Consumer Printers here.
To order a new printhead you can go to HP Sure Supply and enter your printer or go to the HP Parts Store and order the printhead by part number C4900A for the Black and yellow and part number C4901A for the Cyan Magenta. These printheads go by region also so be sure you are using the right region, these were found using the United States region.
The HP Officejet Pro 8500 Premier All-in-One printer has separated the ink cartridges from the printheads. The ink cartridges are on the lower left and the removable print heads are on the carriage inside the printer. The printer goes through a calibration process when turned on that will use ink. Leave the printer on and let it go into stand by mode. This type of printer is energy star efficient and made to calibrate on start up and be left on. Allow the printer to clean or calibrate only if the printer must. If it starts cleaning a lot it may be time to do a little maintenance to the printer (recommend once a month for maintenance). Please see the following links for further details.
Cleaning the Printhead Contacts
Printer Paper Tears, Wrinkles, or is Damaged while Printing from the All-in-One
Paper Path Issues in the Automatic Document Feeder
Officejet Pro 8500 User Guide
The printer has a duty cycle of 7.5k page/month. The XL cartridges have a composite page yield of 1.4k pages with about a third of the black ink left over. To me it would seem that the printhead should last somewhere in between. This printer was designed to save money on ink compared to the rest of the officejets. I hate that it has been causing so much trouble, hopefully the information I provided will help.
HP Officejet Pro 8500 Premier (A909n) and 8500 Wireless (A909g) All-in-One Printers Product Specifications
Click here for page yield information.
Click the Kudos on the left side for helping and click Accept as Solution for providing a solution. I work for HP.
Best Regards,
Kenneth

OCR with HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g

Hello: I have the "HP Officejet Pro 8600 Plus e-All-in-One Printer model N911g" and read in the manual that it comes with Optical Character Recognition (OCR) software. I can't find any OCR software on the accompanying optial disk "HP Officejet pro 8600 series, Windows XP, VIsta, 7, 8 version 28.8".
I'm using an HP Pavilion dv7 laptop running Windows 7 Home Premium ver 6.1.7601 Service Pack 1 build 7601.
I found an entry in All Programs called I.R.I.S. registration but can't figure out what to do with it. Any help is appreciated.
Thanks,
John

Hi,
It's an option during the installtion process. Please try the following Utility:
http://ftp.hp.com/pub/softlib/software12/COL29914/HU-135728-1/hpusetup.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Driver question - my all in one printer will print but not scan

Hi
I have an HP c4280 (you know, the all in one printer you could get for free with the mail in rebate in 2007). I just plug it in and my mac recognizes it as a printer, and it prints fine, but image capture does not recognize it as a scanner. Before I upgraded to leopard I had all of HP's stupid software installed but after upgrading to leopard it didn't work (surprise). A lot of other things didn't work either so I did an erase and install and now everything works beautifully (I feel like I have old Tiger back, but better). However, I do not want to install HP's stupid overbloated and highly unnecessary mountain of software on my nice new clean system (I have turned into kind of an apple-only purist I guess ^_^). I checked HP's website and all they have is the same ginormous software bundle for download, and the installation wizard does not allow the option to install only components of the software (its all 28 programs or nothing). So, my question is, does anybody know where I can find only the driver I need (or WHAT driver I need) to make this printer compatible with image capture so I can scan?

You need to download the full featured driver from the HP site, and it also seems HP has an update for the Leopard installation as well.
http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=219&lc=en&cc=us&dlc=en&produc t=3192753&lang=en
I too have a C4280 and wasn't able to use my scanner until I had fully installed the HP software.

HP all-in-one printer app

Trying to get my NEW windows 8 laptop connected to my MFP M276 color printer...
I get to
http://apps.microsoft.com/windows/en-gb/app/hp-all-in-one-printer-remote/94883cdd-504d-4e94-871c-c70...
this eventually asks me to create a Microsoft account. I don't care to have Big Brother Bill Gates be involved in my HP printer driver.
But finding no way around this, I finally try to make one. It asks for an email address, but the domain is restricted to either Hotmail or Outlook! HELLO? Are there only 2 email providers on the planet? I am stunned. Did a single human test this software?
I finally did the traditional search for a driver, not an app, and find one on the HP site.
Lesson... if you're on a laptop, and see the word "app," run as fast as you can.

Hello Seahorse1305,
Welcome to the forums!
I am here to assist you with the printing issue you are having with your Photosmart B210. The first thing I do recommend, is running the HP Print and Scan Doctor to find and fix printing and scanning problems. If there is more of an issue that the tool cannot fix, it will let you know what the problem is.
Please let me know how this turns out for you!
Thanks,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP All-in-One Printer Remote App For Windows Phone 8.1 Troubleshoot

Dear HP,
Device Nokia Lumia 520
OS Windows Phone 8.1
Printer HP Officejet Pro 8600 All in One Printer
I have installed HP All-in-One Printer Remote on my smartphone as well as on my PC having Microsoft Windows 8.1. The PC app is running
fine but on my smartphone, app can't find my HP Wireless printer. All Devices(PC, Smartphone, Printer) are connected to same wireless LAN Network.
Regards
Sahyog Vishwakarma
Mob.: +91-7206369455
Yamuna Nagar
Haryana

Hi,
The app for Windows phone is a BETA version. In my case (also a Nokia) it can find my printer but when sending something to printer, printer won't print. Again, it's only a BETA version.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Deskjet 3050 A e all in one printer problems printing from ipad

my ipad is connected wirelessly through the WPS set up to a ZyXEL router.
can't connect desk jet 3050 Ae all in one printer to the wireless network. Ipad can't find printer and print
Can you help and give detailed instruction how to set up?

In order to set the wireless connection, you should use the Software from your PC.
You will be prompted to temporary connect a USB in order to configure the printer.
If the sofware is not yet installed on your PC, follow the instructions below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02722113&cc=us&dlc=en&lc=en&product=5061082&tmp...
If you already completed the software installation, you may find the wireless configuration as following:
1. From the computer’s start menu select All Programs or Programs, and then select HP. 2. Select HP Deskjet 3050A J611 series 3. Select Printer Setup and Software Selection 4. Select eighter Convert a USB connected printer to wireless or Connect a new printer and Follow the onscreen instructions.
I was an HP employee.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

Hp7280 all in one printer air print

Similar Messages

Maybe you are looking for