HP7520 Scanner not working on windows 8.1x64 bit PC

Scanner Does not work on my win 8.1X64 PC neither wireless, not usb. Everytime I try I got an error message
It works on my wifes's win7 X32 bit PC. I have run HP Doctor, and it says :
unistalled and reinstall latest software, but nothing.
Device manager shows this : Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19).
It wont let me updrade firmware. I tried in different PCs win 7X32, usb and wireless and still nothing. It displays "an error was found" when attempting to upgrade firmware.
Of course I checked all the requirements, on my 2 PCs, through USB cable , but I always got the same error message.
According to my PC , the firmware version is ELM1CN1409AR. However, the firmware version on HP website is ELM1CN1320AR (older?). My PC is a Win 8.1 X 64 bit, Asus Z87 pro motherboard, Intel i7 4770k processort 16GB Kingston Hyperx ram, Nvidia GTX660.
I don't know what else to do. any Help would be appreciated.
This question was solved.
View Solution.

Welcome to the forums mvcad!
I saw your post about the installation issue you are facing with your Photosmart 7520 model. I will gladly do my best to assist you with this! Thank you very much for all of the excellent screen shots as well by the way! I have some questions and something for you to try to start out with.
Are you able to make copies from the printer itself?
If the copies are working fine, remove/uninstall the printer from the Device Manager, complete a Clean Boot and Disable your Firewall (Re-enable later) and then try to run the installation: HP Photosmart 7520 e-All-in-One Printer Download.
If those steps don't do the trick to have the printer installed correctly, please answer the following question and let me know the results from the above steps.
You mentioned you have tried installing the printer on 2 PC's. Are they both showing the same error when attempting to install?
Thanks for posting in the community, hope to hear from you!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

HP Laserjet P1006 is not working on Windows 7 (64-bit).

I lost my original CD-Driver and I tried to download the CD-Driver on HP website but it doesn't work when I click printing. It seems that my HP Laserjet P1006 is not working on Windows 7 (64-bit).
Can anyone give me a link that works for installing driver for HP Laserjet P1006 for Windows 7 (64-bit)?
Thanks for helping!

Hi @achieverone ,
I can help you with finding the drivers for the Laserjet P1006.
Just to clarify, you were able to install the printer software, but it just isn't printing correct?
Here are the two drivers available for Windows 7 64 bit.
HP LaserJet P1000-P1500 Hostbased Plug and Play Basic Driver.
HP LaserJet P1005/P1006/P1500 Printer Series Full Feature Software and Driver.
Try and print a hardware self test on the printer to find out if it is a hardware or software issue.
Open and close the lid five times quickly. It should print off a page with black lines on it.
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Photoshop cs6 is not working in windows 7 64 bit while all other cs6 programs are working.. what should I do make it work

hi guys,
My photoshop cs6 is not working in windows 7 64 bit while all other cs6 programs are working.. what should I do make it work?
My OS is windows 7
RAM - 8gb
HDD - 1 TB

are you getting any errors?
and secondly and I know this from experience, ( but on 32 bit ) is it loaded already as in sat in task manager, but not actually get at able, killing the processes cures it or a reboot of course

Rocketfish Bluetooth Keyboard RF-BTKB2 not working under Windows 7 64 bit

Rocketfish Bluetooth Keyboard RF-BTKB2 not working under Windows 7 64 bit
Anyone had successs in this or another Bluetooth Keyboard after a bit of a struggle? What did you do to get it working? When I Add Device in Bluetooth it sees the keyboard but enlessly scans for it when I try to select and connect. The Rocketfish Bluetooth mouse worked just fine.

My friend, i have both, the bluetooth mouse and keyboard here that your talking about. and the keyboard was a struggle to pair with the windows 7 64 bit.... i think i spent 2 days working with it. and i didnt try anything special, i just kept trying to pair
it, and unplugging the dongle and working with it... and after a while. it worked... Lately though, i have been looking into getting a wired mouse and keyboard becuase of the delays and sleep time i have with my current keyboard(rocketfish). supposidly there
is a way around the delays but it disables all the options on your keyboard. IE the media buttons, and web browsing features. and my mouse keeps dieing off too....
Also, after researching these products more, i found that alot of people experienced similar problems with them, Being delays and mouse failure. Even with fresh batteries and all. The products werent meant to be used long term(2-3 years) for extensive use...
I dont know about you but i thinki paid 100 bucks for the pair so thats only 25 bucks a year... Which is kinda silly considering i coulda got a better one that wont cough up on me.
If anyone reading this finds a good wireless keyboard that doesnt delay, and a mouth that doesnt delay...(my biggest concern). Please mention it. i am very interested in.

Canon PIXMA MP140 Scanner not working in Windows 7

I have been having problems in getting the Scanner function to work properly in Windows 7. This is the message I receive everytime I try to scan or preview a scan in Windows 7:
Cannot communicate with scanner.
Cable may be disconnected or scanner may be turned off. Check status.
Scanner driver will be closed.
I have installed the latest drivers from the Canon Support website. I have even tried installing the latest Windows XP driver in Windows 7 with no effect. I have also tried using a different USB Cable and connected the USB Cable to a different USB Port on my Computer with no luck.
The Scanner works fine in WIndows XP SP3. I upgraded my Computer to Windows 7 SP1 and now have a problem with the Scanner.
Any ideas? It is supposed to work in Windows 7 I've checked the Canon and the Microsoft website which both say that its compatibie.

This printer/scanner is NOT compatible with Windows 7 32-bit.
I tried installing the latest MP Driver v1.06 and the MP Navigator 3.1 software in Windows XP compatibility mode and Windows Vista compatibility mode.
I even tried using the MP Driver v1.00 and MP Navigator 3.1 software (provided on the CD-ROM that came supplied with the printer) in Windows XP compatibility mode and Windows Vista compatibility mode.
I only had slight success with the MP Driver v1.00 which comes supplied on the CD-ROM with the printer.
When I installed this driver in Windows XP compatibility mode, it wouldn’t scan in MP Navigator 3.1 at all but in Windows Fax and Scan it would let me preview a scan then complete a full scan. But would then refuse to preview or scan anything else after that unless I turned the printer on and off and restart the computer.
This is obviously a driver compatibility problem with Windows 7.
I’m amazed at how Canon has tried to pass this printer/scanner off as being compatible with Windows 7 when it clearly isn’t. I know it works with Windows 7 64-bit but lets face it most people are using 32-bit systems not 64-bit.
It looks like there hasn’t been any proper testing done by Canon. Its poor form from Canon and the lack of replies in this thread is deafening. Seeing as this is the official Canon forum I was hoping there would be at least 1 or 2 replies saying try this and try that but I’ve tried everything there is to try at my end and I’m at a loss at what to try next.
I won’t be buying any Canon products in the future because of the poor after sales service and outright lies about compatibility of one of their products with newer Operating Systems. My next Printer/Scanner/Copier all in one will be an Epson or a HP.

HP 3050 Scanner not working with Windows 7

My HP 3050 worked fine with XP. Now that i have a computer with Windows 7, the scanner will not work. I called HP, and they do not have a fix, and their Windows 7 computer with HP 3050 scanner works the same way. Do you have any suggestions?

Hi Donaldparis,
After researching from the HP website, I realize that they do not release the HP LaserJet 3050 All-in-One Printer driver for Windows 7. It means that you will install the Windows 7 built-in basic driver and use the basic features. For more information about how to install the basic driver, you may refer to the following link:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=3463669&prodTypeId=18972&objectID=c01856597#category4
Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
If it does not work, you may also try to install the printer driver for Windows Vista under compatibility mode.
Install driver under compatibility mode & Administrator level
==================================
1.Right click on the exe file for driver and click Properties.
2.Click on the Compatibility tab.
3.Select “Run this program in compatibility mode for.”
4.Choose Windows Vista (Service Pack 2) from the drop down list.
5.Select “Run this program as an administrator” option under the Privilege Level topic.
6.Click Apply, click OK.
7. Please double click on the exe file again.
Good luck!
Arthur Li - MSFT

Validity fingerprint scanner not working on Windows 10

I downloaded the Validity driver from the website, but my fingerprint scanner isn't working. When I was running the Insider previews it did work and I was able to use Windows Hello. But now with the full version, it does not work. Is there an updated driver or one from another device that would work?

Your solution might depend on your particular setup. Reference:HP ENVY dv6t-7300 CTO Quad Edition Notebook PC ========================================================================Scenerio 1You have HP SimplePass installed -- and you did not say whether or not this is the case -- AND you are running (some version of) the original Series 6 HP SimplePass program that was installed (shipped) with your computer. This Series of the program may, or may not, want to run in your new Windows 10 Operating System. I have read one member's claims that Series 6 HP SimplePass, that is, HP SimplePass probably version 6.0.100.276 -- does run in Windows 10. I cannot verify that is the case. How? Reinstall the existing Validity Driver:Uninstall - do NOT delete the Driver from the Device ManagerReboot (Restart) the computer and log inCheck to make sure your Sign-Options are set in PC Settings If your Series 6 HP SimplePass program is not behaving itself, that is, the program starts and then balks, the Splash screen starts / stops / flashes / freezes, then you might try: Hard Reset / Forced Reset"Repair" the SimplePass program (Programs and Features)Tryoverloading the program, that is, installing the program over the top of itself without removing the existing program from the computer. ========================================================================Scenerio 2 You have been running Series 8 HP SimplePass. There is a new Windows 10 compatible Series 8 HP SimplePass program available:sp71729 HP SimplePass V8.01.46A W7-W10 32/64bit How? Reinstall the existing Validity Driver:Uninstall - do NOT delete the Driver from the Device ManagerReboot (Restart) the computer and log in Download and install the new Series 8 HP SimplePass programPackage will likely download to your Downloads folder >> Double-Click to installReboot (Restart) the computer and log inCheck to make sure your Sign-Options are set in PC Settings========================================================================Scenerio 3 Some odd combination of other factors not listed In any case, you want to reinstall your Validity Sensor Driver. You can likely use the Driver for Windows 8.1 you already have:sp58900 Validity Sensor V4.4.234.0 Win8-Win8.1 Windows 10 Native LogonEven if you do not wish to use HP SimplePass -- or if you have never used it and do not even have it installed -- once you have reinstalled the Validity Sensor Driver, you might check / adjust / manage your PC Settings > Accounts > Sign-in Options Windows Native logon can get you logged into the computer with your fingerprint -- so far, it cannot log you into Web Sites. Reference, Help, Tips:Instructions to Upgrade HP SimplePass Read the first page: Dragon Document Guidelines When you see a Post that helps you,Inspires you, provides fresh insight,Or teaches you something new,Click the "Thumbs Up" on that Post. Click my Answer Accept as Solution to help others find Answers.

ITunes and iCloud not Working with Windows 7 64 bit ???

I just got a new computer running Windows 7 64 bit. I installed iTunes 10.5.2.11 (64 bit). First error was 'The file "iTunes Library.itl" cannot be read because it as created by a newer verion of iTunes.' I closed iTunes and renamed iTunes Library.itl to iTunes Library.itl-old. Of course when I restarted iTunes, I didn't have a library but that was just a minor problem. iTunes created a new file named Library.itl.
Now when I start iTunes it says 'A required iTunes component is not installed. Please repair or reinstall iTunes. (-4204).' There's an OK button so I click OK. That error goes away and then the next error is 'This iPod cannot be used because the required software is not installed. Run the iTunes installer to remove Tunes, then install the 64 bit version of iTunes.'
So I've uninstalled iTunes and reinstalled itunes about a dozen times. I downloaded it again to amke sure it was the latest version. Same errors every time. I uninstalled all my Apple stuff and reinstalled it. Same errors. Also, iCloud doesn't work. Error is "Application not found."
So ***? iTunes won't recognize my iPod touch or my iPad 2. Tried two different cables. Suggestions???

See Troubleshooting issues with iTunes for Windows updates.
Try the repair tip in the third box first.
tt2

ITunes 9.1 does not work with Windows 7 64-bit

I just updated my itunes to 9.1. Now it will not start or falsely tells me someone else is already using it. That's not true. No one else is using it. When I reboot and start fresh iTunes will work. But when I close it and try to get back onto it, nothing happens or I get the error message that someone else is using it. My prior version worked fine on Windows 7 64-bit.

I'm having issues also. I have a Gateway desk top and it has Windows 7 64-bit and iTunes 9 will not install. Keeps saying it could not access my network location. I can't seem to get any resolution from Gateway or Apple for this problem. Even my Adobe Reader 9 doesn't work and I've only had this computer fot 2 WEEKS! Oh! Let's not forget Adobe Flash Player won't download either.

Hp 5850 deskjet not working in windows 7 64 bit

Hello everyone,
    There r many posts talking about how to connect old printers in new OS 64 bit. I v followed the HP official method, which is, install 5600 driver by adding a new printer named "5800"(or whatever). Then change the port in printer property into "USB". After i connect my printer to the usb, the new "5800" device icon becomes bright color( before it was dark) and seems like it will work. But the unknown device icon "5800" is still there so there are two icons in " devices and printers" folder. When i print something the status of printers show me the documents always under" printing" status and whe printer doesnt work at all.
    I may not speaking clearly cause my language is asian. If somebody is an expert i am sure he can understand what i mean.
In my option if i can remove the icon of "unknow device"s and leave the added printer icon alone there, the problems gona be solved. But it seems like there s no way to make it. I bought the printer on ebay with 50 bucks(free shipping), it comes with new ink and extra inks too. If u can fix this problem then i am gona appreciate very much cause u v saved my dollars:-)
     Still remember the day when i bought my first HP laptop. I v been to their service office in northern CA near sunnyvale and there was a guy whos nice to me helping me blow the dust out of my laptop. Now i am using Sony cause they have "expensive looking" laptop and the service is better(they v mailed me free screwdrivers and recovery disks after i called them, unbelievable!) No offense to HP but they seem less willing to offer help in my opinion...(the representitive told me my printers old and out of warranty so he wouldnt answer my questions... its true and reasonable maybe)
   There is an activity this September 21st when experts of HP will come to reply posts so hopefully they can see mine and say something about it.
Its my first post since i registered 3 yrs ago so...
best wishes to all HP members
tim

823755 wrote:
Dear All,
Not ablle to install Oracle 10g Client (Rel 2) in Windows 7 64 bit , getting an abnormal error and stoping ..
Please suggest me how to proceed futherWhich Edition of Windows 7?
Where version of Oracle to four decimal places; i.e. V10.2.0.1

P205-s7469 speakers not working for windows 7 64 bit

I recently upgraded from vista 32bit to windows 7 64 bit. My laptop is equiped with harman/kardon speakers, 2 main speakers and sub woofers under the laptop. The speakers worked fine under vista, now that I have windows 7 my speakers sound bad and the sub woofer will not turn on. I have installed all sound drivers toshiba has listed on their downloads page and still experience the same issue.
Anyone have any thoughts or similar issues?

Can you please give the Product number for your Notebook, I put a link below if you need help finding it, please don’t put your Serial number.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00033108&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
I am an HP employee
Knowledge is power...Power to the people

VMwarePlayer not working in windows 7 - 64 bit

Hi,
I have tried to install ubuntu 12.04 LTS in VMware-player (ver-6.0.2-1744117) running over windows 7 home edition 64 bit.
I didn't get any error while installing the VMWare Player as well as installing guest os.
Guest OS : Ubuntu 12.04 (also tried with 14.04 LTS) - installing using `iso` image
Host OS : Windows 7, 64 bit
Processor :1
After entering the password in ubuntu, it gets freeze and becomes entirely purple(default ubuntu theme). I could not find any unix utilities or icons.
I have tried changing RAM for 512MB, 1GB and 2GB , but it didn't help.
I found that many people had face the same kind of issue while running VMware Player on windows 7, But could not find any appropriate answer which solves the mentioned issue.
I have also tried with VMware workstation(ver-10.0.2-1744117) but the same problem persist there.
Please suggest some fix for this issue.

But I have it worked fine a week ago! I think that stopped working after firmware update...

Blckberry Storm Does not Work on Windows 7 64 Bit Nor on Outlook 2010

Well I have been trying to get this @*** thing working for the last @*## week. My Dell was fried by a power spike. The Blackberry was in my pocket well away from the power spike. My current configuration is:
Windows 7 Home Premium
Acer Aspire 7540
4 GB of Memory 64 Bit Operating System
Blackberry Storm 9530, Platform Version 4.2.0.179, Application Version 5.0.0.419
1. I have installed the latest version of the Desktop Software via downloiad.
2. I spent most of today with tech support from Telus.
3. Neither MSS or MTP will work. We have installed and reinstalled all of the software atleast 3 or 4 times.
4. The Windows troubleshooter knows there is a problem and fails. It says (really helpful). USB Mass Storage Device has a driver problem. It also tries to install the MTP driver and fails. What is strange is that there is some communication going on between the Blackberry and the PC.
5. I can not get anything off the Blackberry (photos etc.).
6. The Blackberry does not work with Outlook 2010.
How can RIM possibly stay competitve when they can not even support the two largest platorms out there (Windows 7 64 bit and Outlook 2010). This is a symptom of massive problems for the future of this company.
I can not talk to RIM. They want me to talk to Telus. Telus says there is nothing they can do. I basically have a Blackberry that is little more than a simple phone. If the @#*# thing did not cost so much I would just pitch it and get an iPhone.

moirl wrote:
5. I can not get anything off the Blackberry (photos etc.).
As was stated above:
1. Go to Options >> Media Card (or Memory)
(some themes or BlackBerrys may call this "Settings >> Media Card")
2. Check the following settings (if they are not listed this way, then change to reflect the following:
a) Media Card Support: On
b) Mass Storage Mode Support: On
c) Auto Enable Mass Storage: Yes
3. Save the settings and exit
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Java ME SDK 3.0 not working on Windows 7 64-bit

Hi everybody,
the sdk has no 64-bit Version and the solution described at:
http://forums.sun.com/thread.jspa?threadID=5434297&tstart=45
did not work for me.
Even after changing the two configuration files bin\java and toolbar\bin\java to point to 32-bit installations of the jdk/jre, the sdk does not work and it cannot be uninstalled.
Error when starting the SDK:
A java.io.IOException exception has occurred.
Click Show Details or see the messages.log file located in your Z:\javame-sdk\toolbar\3.0\var\log folder.
(Details:)
java.net.ConnectException: Connection refused: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
     at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
     at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
     at java.net.Socket.connect(Socket.java:529)
     at java.net.Socket.connect(Socket.java:478)
     at java.net.Socket.<init>(Socket.java:375)
     at java.net.Socket.<init>(Socket.java:189)
     at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:22)
     at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketFactory.java:128)
     at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:595)
Caused: java.rmi.ConnectException: Connection refused to host: localhost; nested exception is:
     java.net.ConnectException: Connection refused: connect
     at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:601)
     at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:198)
     at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:184)
     at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:322)
     at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
     at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:97)
Caused: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: localhost; nested exception is:
     java.net.ConnectException: Connection refused: connect]
     at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:101)
     at com.sun.jndi.toolkit.url.GenericURLContext.lookup(GenericURLContext.java:185)
     at javax.naming.InitialContext.lookup(InitialContext.java:392)
     at javax.management.remote.rmi.RMIConnector.findRMIServerJNDI(RMIConnector.java:1886)
     at javax.management.remote.rmi.RMIConnector.findRMIServer(RMIConnector.java:1856)
     at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:257)
Caused: java.io.IOException: Failed to retrieve RMIServer stub
     at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:338)
     at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)
     at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.connect(Unknown Source)
     at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.start(Unknown Source)
     at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.lookupMBean(Unknown Source)
     at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.findObject(Unknown Source)
     at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.openConnection(DevicemanagerHelper.java:53)
     at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManager(DevicemanagerHelper.java:86)
     at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.ensureDMStarted(AutoInstaller.java:292)
     at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.restored(AutoInstaller.java:63)
     at org.netbeans.core.startup.NbInstaller.loadCode(NbInstaller.java:421)
     at org.netbeans.core.startup.NbInstaller.load(NbInstaller.java:342)
     at org.netbeans.ModuleManager.enable(ModuleManager.java:906)
     at org.netbeans.core.startup.ModuleList.installNew(ModuleList.java:428)
     at org.netbeans.core.startup.ModuleList.trigger(ModuleList.java:364)
     at org.netbeans.core.startup.ModuleSystem.restore(ModuleSystem.java:276)
     at org.netbeans.core.startup.Main.getModuleSystem(Main.java:165)
     at org.netbeans.core.startup.Main.start(Main.java:312)
     at org.netbeans.core.startup.TopThreadGroup.run(TopThreadGroup.java:110)
[catch] at java.lang.Thread.run(Thread.java:619)
When I try to uninstall, an error log file is generated in the installation path of the SDK. Although it "sees" the 32-bit java installation, at its botton appears the following (interesting?) line:
vm_info: Java HotSpot(TM) 64-Bit Server VM (17.0-b17) for windows-amd64 JRE (1.6.0_21-b07), built on Jul 17 2010 01:05:36 by "java_re" with MS VC++ 8.0 (VS2005)
Can someone help?
Thanks a lot in advance.

Hey what's up Gatos.
Listen I have the same problem and I was wondering if you figured it out since October 2010 (your last post).
I also get the same IOException exception error. I also have windows 7 64bit, i installed 32 bit version of the SDK and uninstalled any previous versions. The Java ME SDK 3.0 Kit installed as well, and pointing to an appropriate sdk directory. I also tried changing the two configuration files (didn't have to change them because they were correct since I did not have any other version of sdk installed prior to installation of Java ME SDK 3.0.
So I am experiencing the same exact symptoms and I am wondering if you have resolved this issue yet or if you know of any other source of information that might help me. Your help would be greatly appreciated on this one. Thanks, and please respond even if it is a no if you can.
**EDIT:**
The Java ME SDK 3.0 magically started few times too, after displaying manyyyyyyy of these error windows, but it does not happen every time either. HELP
Edited by: 835054 on Feb 9, 2011 12:10 AM

Acrobat Pro X PDF previewing not working in Windows 7 64-bit

Greetings, all,
The organization I work for recently purchased a volume license for Acrobat Pro X. We uninstalled Adobe Reader from all of our machines and installed Acrobat Pro X on them. After the move, the PDF preview handler stopped working. People commonly link to the URL below, but it has not worked for us. It appears it only works for the PDF preview handler packaged with Adobe Reader, not the one packaged with Acrobat Pro.
http://www.pretentiousname.com/adobe_pdf_x64_fix/index.html
Users are unable to preview PDFs in Windows Explorer and Microsoft Office Outlook 2007. When attempting to preview in Windows Explorer, the following appears:
This file can't be previewed.
What can we do to get the preview handler working in Windows Explorer (Windows 7 64-bit) and Office Outlook 2007?
Thanks in advance!

Bill@VT wrote:
OK. Then do you mean the thumbnails in Windows Explorer? I don't have a solution for that, but there have been several posts about the issue.
Well, thumbnails in Explorer don't work either, but we're not concerned about it. The preview pane is what we're worried about. There is a button in the top-right that turns the pane on. Previewing in Outlook does not work either.
Sabian Zildjian wrote:
Check the value for AppID in this registry key:
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Classes\CLSID\{DC6EFB56-9CFA- 464D-8880-44885D7DC193}]
What do you have?
{534A1E02-D58F-44f0-B58B-36CBED287C7C}
DisplayName is set to "@C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\pdfprevhndlr.dll,-101".

HP7520 Scanner not working on windows 8.1x64 bit PC

Similar Messages

Maybe you are looking for