HP8600: pages printing out of order; Win XP; MS Word

HP OfficeJet 8600; Windows XP; working in MS Word
Hi.
I just purchased this printer.  Trying to get the duplex printing feature to work properly.  I does print duplex, but the pages are out of order.  Instead of pages being in numerical order as you go from front of page to back of page, then to front of next page and back of it.....  it is printing page #1 on front, #3 on back, then #2 on front of next page, #4 on back.
I'm sure this is a question of settings.  With any settings changes I'ved made, it prints exactly the same way every time.  So I've apparently not found the right thing to change yet!
Thanks

Disregard....
right after posting my question, I went back to play with the settings again.  I know I tried 'front of sheet', but apparently didn't try 'back of sheet'.
sorry for wasting your time looking !
have a great day!

Similar Messages

  • Print out of order in creat mode

    hi
    sapians
    can i take print out of maint pm01 order in creat mode

    hi
    pal
    1/ you can take the print out of order in creat mode
    2/ i fy ou have relaese the order cancel it
    3/ then cancel the relaese /put in process
    4/ but dont save the order take the print out
    5/ again relaese the order
    but the system condition will see craet and this is a easy ,reday solution
    if you wnat on permanate basis you have to cinsult to devloper he wii set user status for this

  • Separator page prints out with wrong name when printing from Outlook 2010

    Working with Windows 7 Enterprise, Outlook 2010.  We've set up our desk printers to print a separator page with the user's name, as several people use the same printers in our building.  Printing from IE, Word, etc. all work fine, and it'll print
    out the correct username on the separator page.
    When anyone attempts to print an Outlook email, it instead prints out my username.  We've found that it doesn't happen if they click on the "quick print" button, but it happens every time if they do "file > Print" or Ctrl+P.

    Hi
    As per the information and details provided by you that separator page prints out with wrong name when printing from Outlook 2010, please follow these steps: -
    To create a custom separator page file, use a text editor such as
    Notepad. On the very first line, type one single character, and then press
    Enter. The character on this line defines the character used as an escape character. For example, the following list assumes that this character is the at sign (@).
    Enter the escape codes for the functions you want, and then save the file with an .sep extension in the Windows System32 subfolder.
    In the Print Manager, select the printer that you want to use the separator page file with, and then click
    Choose Properties on the Printer menu.
    Click
    Details, specify the name of the desired separator page file in the
    Separator File box, and then click OK.
    Note:
    Put the custom separator page file in one of the following locations:
    In the %Windir%System32 folder.
    In a folder whose path contains a SepFiles folder. For example:
    Drive:\Folder\SepFiles\Subfolder
    I hope this information will be helpful for you.
    Thanks and regards
    Shweta@G 

  • Why do web pages print out in some kind of weird language or binary code?

    When I look at a web page (ie. on-line order from Staples) it looks normal. When I go to print it, the formatting is bizarre - I cannot even reproduce it for you as it is full of marks and squiggles. Numbers do not come out at all.
    I just always used Explorer if their was something I knew I was going to want a printed copy of.
    (50@$0.49) $24.50 printed as E RM ] AMKQV F AOQKRM
    PST/QST printed as mpqLnpq
    The word Documents comes out as acAiaEaie with ~`" ^ type marks above the letters.

    There's a Bug which causes Firefox to print '''gibberish''' or '''garbeled''' characters for certain fonts, with certain print drivers.
    https://bugzilla.mozilla.org/show_bug.cgi?id=454532
    ''(Please don't comment in that Bug report unless you can provide a patch to fix the problem.)''
    https://bugzilla.mozilla.org/page.cgi?id=etiquette.html

  • Value not populating in the print out (sales order) for the 1st time

    Hi friends,
    While saving a sales order, the order confirmation going to the user is not populating the LDC field. LDC is Last date of change. This field can be found in the Additonal data 2 tab of the material in the sales order. When I enter a date in this field and save, the print preview of the output has this value, but the print out does not carry this value.
    Another weird thing about this issue is that, the second time i trigger the output, the print out has the value.
    Please give me some clue on where to check and how to go about fixing this problem.
    Regards,
    Shanu.

    Dear Shanu,
    This issue may be related bug in the output program so take help of ABAPer to fix the issue.
    I hope this will help you,
    Regards,
    Murali.

  • How to make a CD Jacket and print out Song order directly from playlist

    I was wondering if there was a way to make a CD Jacket with artwork from songs selected and also how to make a same size sheet to fit in the CD holder that has the exact song order and titles by printing out directly from your playlist.
    I am not sure I worded that right but hopefully you will know what I mean.
    Any help would be greatly appreciated.
    Thanks

    There is a pretty basic CD insert that you can print from iTunes, if I remember correctly it will print whatever artwork is attached to the first song in the playlist.
    Open iTunes, highlight the playlist in question, go to File>Print and choose the CD Jewel Caser Insert radio button. Theres also a little Theme menu.
    However you can get much more flexibility from a dedicated CD Cover program. I use Cover Star, it's inexpensive and makes good quality CD booklets, back covers and disc overlays. It will generated artwork for you or you can drag your own picture files to it. You can download a trial version from this link: http://autostylus.com/coverstar.html. It's fully functional apart from printing so you can play around with it and save the inserts until you decide if it's for you. Purchasing a license then releases the final function and anything you saved previously can be printed off.

  • Photoshop Batch Bulk Print Action Printing Out of Order

    I have 900 files I need to print out. I created an action that simply prints the current document, then closes it. The problem is, photoshop is printing the files out in random order. The files are numerically ordered, it should print in order.
    I go to File -> Automate -> Batch and select the printing action that I recorded and set the folder that contains the image files. The image files are all labeled numerically from the data set merge I did within photoshop.
    The problem is, even though this list is in numerical order, photoshop will print these out in random order. For example, the file folder containing the image files is listed below in correct order.
    Instead photoshop printed them in this order: CustomMailer_Data Set 1, CustomMailer_Data Set 10, CustomMailer_Data Set 11, CustomMailer_Data Set 12, CustomMailer_Data Set 13, CustomMailer_Data Set 14, CustomMailer_Data Set 16
    Please help, I really need this bulk action to print them out in order, I have no idea what the program is doing.

    @Paul Riggott,
    Thanks for taking the time to write the script, I really appreciate it. However, I seem to be using it incorrectly since its not renaming my files.
    here is what I did.
    1. Launched Adobe ExtendScript & Pasted your code in
    2. Saved out script file to desktop
    3. Launch Photoshop, file ->script->browse to locate where script was saved to
    5. Select source file containing PSDs to rename
    Below shows the results.
    Tried running it directly within extend script as well with no luck.

  • Design page print out

    Post Author: jrock
    CA Forum: General
    I am using CR XI,  Besides using a screen print (which would miss a lot), is there a way to print out the design page?

    Post Author: V361
    CA Forum: General
    You are stuck with screen print, you could shrink the view to 75%, but more than likely, that is not what you are looking for.  Are you wanting to do this to check your layout  ?

  • Having touble capturing full page print out from G mail.

    I have a Mac. Bad idea as a PC person. I try and print using the file print command from the firefox bar. When I do I get only a column of information and not the whole e-mail information.
    I have checked the settings in both Mac and FireFox and they are both set for capture on screen and print at 8 X 11 format. That does not happen when I want an email printer out... HELP!!!!!! Do I need to go to G-mail too? Cabella

    Hi @NickRN8 
    I am not sure what is causing the inconsistency in selected pages not printing, but I'd be happy to help.
    Let's reset the printing system, repair disk permissions, re-add the printer using the right driver, and try to scan again.
    Reset Printing System
    Click the Apple icon (   ), and then click System Preferences.
    In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan  dialog box opens.
    Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
    Click OK to confirm the reset.
    Type the correct Name and Password.
    Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
    Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
    Repair Disk Permissions
    On the Dock, click Applications, and then click Utilities.
    Double-click Disk Utility.
    Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
    Click the Repair Disk Permissions button at the bottom of the window.
    Once the repair is complete, restart the computer and add the printer back.
    When you add the printer, please ensure you are using the HP driver.
    Select Add other Printer or Scanner                                                      
    Select the printer you are adding and next to 'Use' you can select the printer driver 
    I look forward to hearing from you. If the issue remains unresolved, I will post instructions to completely scrub the HP software from the computer and start fresh.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Printing out of order in iphoto 11

    I recently upgraded from Iphoto 8 to Iphoto 11.For my work I need to create contact sheets of up to 100 photos that would be in a specific order. I put the photos that I want to use into a folder and change the view to Maunual. This allows me to add the photos in the order that I want to see them on the contact sheet. In Iphoto 8 these photos would print in the order that I had placed them, but in I photo 11 it moves them into some default order when printing?
    What is going on and how can I print them in the order that I need them?
    Thanks
    Eric

    Its might be iPhoto... But, I dont think so.
    I think it is something with iTunes...
    All my devices show multiple and scrambled events in iTunes under the photo tab. Both my original Apple TV's, 1st Gen iPad, and iPhone 4...
    iTunes bug it seems.... I can't get it fixed.

  • When i print out cd album case inserts-the songs all print in one glob and then the photo of album on same page prints out normal-only happens on my itunes -not anywhere else i print ok thanks

    hi-i need help- when i try to print a cd jewel case insert(i did this many times)the songs side will print out on top of each other like one big glob-and the other half the photo of album comes out correct-i thought it was my old printer so of course got a new one-still does the same crap-help me

    I believe that insufficient RAM may be the source of some of your problems. If you have a RAM of somewhere 4 to 8GB, you will experience smoother computing. 3GB doesn't seem right, so you might want to learn more by going to this site:
    http://www.crucial.com/store/drammemory.aspx
    I don't know what know what's happening with your optical drive, but it seems you use your drive quite a bit. In that case, look into a lens cleaner for your machine. It's inexpensive, works quite well.
    I hope you'll post here with your results!

  • Print Queue Jobs print out of order

    It seems that jobs that have been sent to the printer queue print in an order other than the order they were submitted. It is most often evident when I print several photos from iPhoto, but I have also seen it happen from other applications.
    Is it possible the queue is selecting jobs by size?
    If so, How can I change the printing order so that they are printed in the order that they were submitted?
    Thank you in advance.
    Jeff Cameron

    Myself, I'd use GraphicConverter and it's powerful Browse Folder & various Print capabilities...
    http://www.lemkesoft.com/xd/public/content/index.cGlkPTE5Mw.html

  • Statements printing out of order

    I have to possibly simple questions ....
    1. I cannot print all of my customer aging statements for a group code with freezing the client and having to shutdown the client app.
    2. if I print small numbers of cardcodes at a time i can get them to print. However some statements have multiple pages. you would think page one would print then page two, but that is not the case. All page ones are printing then all page twos. since not every page has a page two and there are over 800 statements per group ... this makes it very difficult to sort the pages afterwards.
    so the question is
    A. does any one now why it is freezing?
    B. does any one know how to specify the page order?

    ok I think I found something but I am not sure what it means. When I look at the currentpage() operator at the bottom of the pages it is going in order say for instance i have customers
    12345
    and
    12343
    both of whom have 2 page printouts then i would thing they would print
    12345 page one then 12345 page two
    then
    12343 page one the 12343 page two
    but what is happening
    is 1234 page one then 12343 page two then 12345 page three and then 12343 page 4
    so it seams that some how the groupin is wrong, for itnstance in crystal you would tell it to go to new page each time the group changes. I have no idea though how to do this in pld.

  • Pages print out of sequence when printing double sided

    I have an hp5550 deskjet printer that when printing double sided prints pages out of sequence.
    HP 5550 deskjet
    XP

    Hi there blbarbina,
    Could you provide the community with a little more information to help narrow troubleshooting? Does this happen in only one application, if so what application? Is this a booklet style document?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • JSF Navigation and page access out-of-order issue

    I've been searching the web and the forums for an answer to what I thought would be at least a well-documented issue with JSF, but have been coming up empty. (which to me might mean its not an issue and just a lack of understanding on my part)
    Lets say I have two pages, one (license.jsf) that has a simple form that presents the user with a license agreement along with two commandButtons with actions "accept" and "decline".
    The other page is a landing page, lets call it "results.jsf" which the user gets navigated to should they choose to accept the license agreement.
    The problem I have is whats to stop a user from just typing in results.jsf. Granted my controller can store a value somewhere as to whether they have accepted the terms of the license and not display the content on the results.jsf page, but what I'd really like to do is intercept that initial request to results.jsf and redirect them to the license.jsf page.
    I can fathom a bunch of different "hacks" to make this work, but I'm really hoping that somebody knows of some more elegant solution for addressing this whether its in JSF directly or using some support framework like a SEAM or Spring(?) (I'm vaguely familiar with SEAM and I'm figuring since its got a workflow on the back end, its kinda hard to drop into the middle of a process flow, so maybe it addresses that some how). Or I'll happily take any suggested URL's to other threads/websites that offer advice on this subject.
    Thanks.

    Yes, I've tried that. It really is puzzling. I am also fighting the battle of the counters (trying to get them to stay centered, and (as mentioned in a separate post) trying to figure out why I have a duplicate entry in my RSS feed.
    I wonder if that problem is connected to this one?

Maybe you are looking for

  • Acrobat XI Pro wont install on Mavericks Mac

    Hoping someone might be able to help. Downloaded Acrobat XI Pro trail Successful But will not install on Mac running Mavericks OS 10.9.2 Message returned at very end of install process during the running package scripts stage is "The Installation Fai

  • How to know if executing a query cost long time

    Hi, I have a question about how to figure out if execution of a query takes long time. I am building a web application in java. The back end database is oracle. If a query is too large, I want to put show the user the error message to let the user ma

  • Syncing my Music..

    How do i update itunes on an ipod 5? every time i try to sync my music from my macbook pro to my ipod, it says i need to update itunes to 11.1... how do i do this? Thanks!

  • I have minum resolution, yet much is missing from import window

    I am running LR on a netbook which runs the minimum lightroom resolution requirement of 1024 by 768. While very tight in the main work area, everything still seems to show up (once I close down the side panels). BUT during import many of the tools I

  • Scaling doesnt work

    Hi, On CS5.5, when I scale a video to the correct dimensions and render it, it looses the new dimensions and reverts to the old. How can i make it stick at the new dimensions? The files are quicktime movies and jpegs. Thanks a lot