Hp8600 use document feeder as paper source

Print on envelopes is crooked.   Can i use the documemt feeder as a paper source rather than tray1?

Hi,
This is not possible, document feeder is only to feed the documents to be scanned/copied and faxed.
paper source for printing will always be tray 1 or 2.
you can make sure that the paper guides are adjusted correctly in the paper tray to avoid crooked p[rinting
Hope this helps
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

Similar Messages

  • Officejet 6500 Wireless Puts lines on page when using document feeder

    Hi,
    Only using the document feeder for either print or scan there are vertical lines down page sometimes in the middle and sometimes at the end and some horizontal lines as well.
    Scanning or printing direct from the glass - doesn't happen.
    I have to be able to feed more than one page for a fax or scan so its on one document.
    Does anyone know why this is happening when I use document feeder?
    any assistance greatly appreciated

    Hi,
    Plesae click the link for the solution..
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01728503&cc=au&dlc=en&lc=en&product=4083977&tmp...
    Let me know whaty happened...thanks... =)
    Although I am working on behalf of HP, I am speaking for myself and not for HP.
    Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
    If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
    Happy Troubleshooting : )

  • 7515 ios 8 scanning doesn't function using document feeder

    My AiO remote updated on my iPad today and i have issues scanning from the scanner. The printer and tablet functions properly when scanning using the glass however when using the document feeder, AiO remote scans the sheets then before saving it says there is a problem with the scanner, check the scanner. not sure why it works with the glass and NOT with the feeder.

    I am having the exact same problem. I will add that scanning from the document feeder to my Mac Book works fine. The problem with the document feeder is only whenn atttempting to use the AiO software on my iPad.

  • EPSON Workforce 310 "scanner reported an error" when using document feeder

    I'm having trouble using my EPSON Workforce 310 printer/scanner with my new MacBook Pro (late 2012, 2.5 GHz i5, OS X Mountain Lion 10.8.2).
    Using the flatbed I can scan without a problem. But when I try to use the document feeder, I get the following error right after I click Scan and before the scanner has done anything (at least I don't hear anything moving inside the EPSON):
         Scanner reported an error
         An error occured during scanning
    The EPSON's display doesn't show any error or special message.
    This is repeated whether I use Image Capture, Preview's Import from Scanner, or the printer's native app (PrinterProxy, the one that shows up in the doc whenever the printer is printing or scanning).
    I have no problem doing the scanning from my old iMac (2006, 2GHz Core Duo, Snow Leopard). After scanning to the MacBook fails I can walk over to the iMac and scan from there without problem and without resetting anything on the EPSON.
    The EPSON is connected the home network via ethernet to a Time Capsule. Both computers are connected to the network via WiFi.

    Syd,
    My wife's iMac with 10.6.6 stopped working with her Epson 2480 Photo scanner. Get the error message "SCANNER reported an error. An error has occurred during scanning" I am trying to use it from the Image Capture App or from the print/fax option in Settings which opens Image Capture. I ran the uninstall program and then reinstalled the ICA 13969 .dmg but get the same error. Not sure what else I can do.

  • Making a printed BANNER using cont. feed banner PAPER

    does anyone have any idea if I can make a banner (8/12 x 36") using continous feed paper in my printer? I have the trial verison of Pages '08 which came with my new iMac. (I am a mac newbie) For years I easily made printed banners (using up to 5 sheets of cont. feed paper) using MS Publisher.
    Thanks in advance.

    Yes, I have tried Google, and the Apple.com downloads section, but to no avail as yet.
    The Canon printer seems terrific and is a step up from an older HP all-in-one machine....however...i miss the easy HP banner printing dialog boxes...(HP sells banner paper that is perforated and made for this purpose as you probably know) and it is just so easy on a PC. I hope to be able to say the same thing about my new Mac soon.
    I did try changing the paper size in Pages, FOLLOWING YOUR INSTRUCTIONS TO USE INSPECTOR...but must have done something wrong because I was not able to actually SEE on on my screem (and thus create) an ACTUAL banner for printing.
    I will keep trying. Thanks for the suggestions. My banner making days may be on hold for now (others will be more disappointed about this than me!)
    MANY thanks.
    If anhyone reading is aware of Banner-Creation software for making actual BANNER PRINTS on an inkjet...please share ! Google searches ususally result in software for WEB-banner creation ..something quite different !

  • What does the automatic document feeder tray do?how to use it in hp photosmart 7510

    wht is the automatic document feeder tray for? how to use it?

    The ADF is used to automatically feed a number of pages for scanning, copying or faxing.  Paper is loaded into the ADF with the printed side facing up.  When you then copy (or scan or fax) the pages will be automatically pulled into the scanner mechanism one at a time and then deposited in the output tray. 
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HP Photosmart C410 document feeder says there is a jam everytime I use it (when the job is done)

    Hi all, I am on my second HP c410 (black, premium photosmart printer with an ADF, web, eprint, etc). I returned the first one because everytime I used the document feeder to scan or fax, at the end of my job, I would get an error saying paper jam in the feeder, reload, and try again.
    My second C410 is doing this as well. I called support and their conclusion was to either send it to them or exchange. Is this a well known problem? Is it worth it to try to exchange it for a third one, or can you think of anything that would cause this. Support had me take apart the paper puller, check every nook and cranny (this was with the first one) and then go through some documentation on my own. I am figuring if my second one also does this, other people have to be experiencing it as well and maybe found a work-around????
    I really like this printer and do not want to choose a different model  

    I'm in the same situation. I've just received my second C410 printer with this fault in the document feeder (it continues to try to feed when all documents have been fed and eventually shows a feeder jam error). HP support asked me to try various resets without success, but I've located the problem.
    Underneath the cover for the document feeder is a small plastic spring-loaded part which detects the presence of paper. On my machine, this gets stuck in the up (paper present) position when paper is fed and so the printer doesn't know when no paper remains in the feeder tray. I proved this to be the cause by gently forcing the paper detector down with a finger after the paper had fed. By doing this, the feeder works correctly. Looking at the affected part, this appears to be a design or manufacturing fault as the hinged paper detector rubs against the document feeder cover which causes it to become stuck.
    I found this HP support page with a picture of the offending part on a similar model: http://bit.ly/cUh4dS (see the picture under the heading 'Solution three' near the bottom of the page).
    Unfortunately, I've had to return both of these for a refund. It's a shame as otherwise it seems to be a well designed machine.

  • HP Officejet Pro 8600 Plus AIO automatic document feeder paper jam.

    While scanning a smaller document using the ADF, it got jammed in the feeder. While recovering the document, a corner of the document got torn and got stuck in the document feeder. Now, every time I use the feeder to scan a document again, that document gets jammed because of a little chunk of paper that's still stuck in the feeder. I tried carefully with a toothpick to grab the little chunk of paper, but I can't get a hold on it. Is there any way to open the feeder a little more? Not just only the top lid of the feeder? Or are there any other ideas as to resolve my issue?
    Thx for any suggestions you might have.
    This question was solved.
    View Solution.

    Hello blissteach,
    I understand you have done all the troubleshooting steps and the ADF is still not picking up paper on your OfficeJet 8600 Plus. I would like you to try and reset the paper sensor inside the ADF, please follow the steps listed below:
    1. Open the ADF top cover
    2. Locate the ADF paper sensor inside the top cover. (See image below)
    3. Make sure that the paper sensor hangs freely from the ADF top cover, and that the sensor parts are not broken, dislodged, or stuck.
    4. Close the ADF top cover.
    Please let me know if this was able to resolve the paper pick problem, if it is still now picking up the paper from the ADF please let me know and I will send you a private message. 
    Thank you in advance,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Printing problems when using automatic document feeder (HP Photosmart 309C)

    When I print using the normal paper trays, everything comes out fine.  However, when I feed a document through the automatic document feeder, it comes out with four vertical lines running down the page.  I have tried cleaning the rollers, but that has not worked.  Anyone have any ideas/solutions?  Thanks in advance, Jack.

    When I print using the normal paper trays, everything comes out fine.  However, when I feed a document through the automatic document feeder, it comes out with four vertical lines running down the page.  I have tried cleaning the rollers, but that has not worked. 
    I see that this post was made in June of 2010, but there was no reply. I found the solution elsewhere:
    Lift the scanner lid. You will see the main glass and a small glass about the width of a ruler. There are a couple of dots of debris on that small glass. Line up the lines to find them and clean with a bit of glass cleaner on a rag or napkin. The reason a small dot makes a line is the paper passes by the scanner with adf rather than the scanner passing by the paper on flatbed scans.

  • Hp Officejet Pro X476dw MFP document feeder says there is a jam and there is no paper

    the document feeder is clear but screen says there is a jam.  cannot clear it out.

    @weirdharrell 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • Hp inject pro 8600 plus - remove paper jam in between auto document feeder in the roller

    Product Name and Number
         • hp officejet pro 8600 plus
         2. Operating System installed (if applicable)
         • winder 7 3. Error message (if any)
         • paper jam in automatic feeder 4. Any changes made to your system before the issue occurred
         • none 5. In the subject title, include a brief, specific description of the problem, and your product information (i.e., product name of your laptop, notebook, printer, other device, etc.)
         • my document is stuck in between the auto feeder roller.   I am not able to remove the document.   is there a way to open the auto feeder roller to remove the document without damaging the document?

    Hi  and welcome to the HP Forums. I see you are running into paper jam issues. I would recommend utilizing the steps in this document on a 'Paper Jam' Message Displays on the All-in-One. I would also recommend this document on The Automatic Document Feeder (ADF) Does Not Pick Up Paper for more information on accessing the ADF. Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums.

  • I have a message saying there is a jam in the automatic document feeder even though there is no pape

    I have an HP Color Laserjet CM2320fxi MFP. The message is "document jam - open auto sheet feeder door and clear", but there is no paper. I have even disconnected the scanner unit and still getting the same message. Is this a software issue and can the machine be software reset? I have done the screen reset without success. I don't think a replacement lid with document feeder would resolve the issue. Thanks

    TimCW1,
    Here is a link to a document about the Automatic Document Feeder for your printer. It deals with the specific error message you are getting. Let us know if this helps or if you still have the issue.
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • LaserJet Pro MFP M127fw docuement feeder tray won't recognize paper in feeder tray

    I just got this printer Friday.  I have tried scanning two pages and The document feeder tray does not recognize that there is paper in the document feeder. Same  thing happens when I try copying. Thanks.

    Welcome to the HP Forums Laine2014,
    I see by your post that the ADF isn't pulling in the paper to copy or scan.
    I can help you with this issue.
    I would do a hard reset to see if that will resolve the issue.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 30-60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation.
    I have provided a document to go through the steps to see if it will help resolve this issue.
    'Document feeder mispick' Message Displays on the Control Panel and the ADF Does Not Pick Up Paper o...
    If you need further assistance, let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Getting Canon 4770 to scan multipages into a PDF file while using the document feeder

    Hi All
    I'm new to this forum.  So if I break any rules with my questions below, kindly forgive me.
    But my questions are about my Canon MF4770 printer.
    1.  Why can't I used the document feeder to scan multiple pages into one PDF file?
    2.  Why do I have to constantly select the remote scanner option when the printer is connected to my computer?
    Any help I can get will be very appreciated.
    Starlene

    Hi Starlene and welcome to the Canon forum,
    The ability to scan multi-page documents can depend on your operating system and version, and if the scanning software being used supports the feature.  However, the MF Toolbox application that accompanies your laser product offers this option when scanning via a USB connection to your computer.
    For example, if you are using Windows, below are the steps that would be performed:
    1.  Place documents.
    Note: Up to 35 documents can be loaded in the feeder.  Be sure to fan the stack, place it face up, and align the document guides to the width of document.
    2. Press [SCAN].
    3. Press [^] or [v] to highlight <Remote Scanner>, and then press [OK].
    The machine is now waiting to be scanned.
    4. Double-click the [Canon MF Toolbox 4.9] icon on the desktop.
    The MF Toolbox starts.
    5. Click [PDF].
    Select [PDF (Multiple Pages)] in [Save as Type].
    7. Specify the required settings as needed and click [PDF Settings].
    The [PDF Settings] dialog box appears.
    8. Specify the required settings as needed and click [OK]:
    [Create Searchable PDF] Converts the characters in the document to text data and makes the PDF document searchable with keywords.
    [Text Language] Select the language of the text to be scanned. The characters may be recognized more accurately if you select [English] from the drop-down list and set [Image Quality] to [300 dpi] or higher in [Scanner Settings].
    [PDF Compression] Select [High] for color images such as photos or illustrations to reduce file sizes.
    9. Click [Start].
    Note:
    A folder with the scanning date will be created in the [MY PICTURES] folder in the [MY DOCUMENTS] folder, and your document will be saved in this folder. If there is no [MY PICTURES] folder, the folder with the scanning date will be created in the [MY DOCUMENTS] folder and your document saved in this folder.
    For text documents or black-and-white documents, it is recommended you select either [BLACK and WHITE] or [GRAYSCALE] in [SCAN MODE].
    If making a Multiple PDF with color documents ([IMAGE QUALITY] set to [300 dpi]), it is recommended that the PDF have fewer than 20 pages.
    The MF toolbox can be loaded from your software CD or downloaded here from the "Drivers & Software" tab on the Canon USA website.
    I can understand some confusion on having to select "Remote Scanner" when you have a direct computer connection to your product.  The reason for this is that first, the "Remote Scanner" mode refers to seeing your computer as a stand alone, or remote, device; however, the "Computer" scanning mode option allows you to select which computer will be performing a scan when doing so over a network (Max: up to 10 computers).
    Another reason for having to select the scan mode is that the selection is not programmed but selected based on the type of scan you will be performing at the time.
    If this does not answer your questions or we can offer further assistance, please feel free to Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Photosmart 7525 won\'t pick up paper from the Automatic Document Feeder

    Just bought this printer from Costco. The Automatic Document Feeder won't work. Chime indicates that paper is inserted, but there is no pickup. 1 page or more, won't pull paper through.

    Sorry that you are experiencing an issue with the ADF.  Sometimes it may need cleaning or rollers need wiped. I understand with this being a new printer, you should not have those problems.  Here is a link that may assist you with that issue. http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01728503&cc=us&dlc=en&lc=en&product=5286643&tmp_track_link=ot_search Let me know if this helps. 

Maybe you are looking for