HP8610 Touchscreen Won't Respond - Wireless Light is On

The touchscreen on my 8610 is frozen. Discovered this when I tried to make a photocopy and the icon on the touchscreen wouldn't respond. I can still print wirelessly from my Macbook with no problem. The blue wireless light on the printer is on. I've been printing wirelessly, scanning, and copying for 6-months with no issue. Any help is appreciated.

Makes no difference. I unpluygged the printer, let it sit for 10+ minutes, plugged it directly into a wall socket, then turned it off/on using the power button on the printer. Still the same ... the wireless light is on, the touchscreen won't respond, but I can still print wirelessly from my computer.

Similar Messages

IPhone 5 touchscreen won't respond until lock button is pressed.

Got a wierd problem. I replaced a cracked display in my wife's iPhone 5 and now the touchscreen is having issues. It happens like this:
1. Hit the home button, lock/unlock button or a call comes in
2. touchscreen doesn't respond
3. hit the lock/unlock button to lock the phone
4. hit home button or lock/unlock again
5. touchscreen works perfectly now
Happens every single time. With or without case. I was wondering if it might be a grounding issue, but not sure how to fix it. What's the deal?

Bummer. Try asking at http://www.ifixit.com or some place similar.
The iPhone is not considered user servicable. Apple does not sell iPhone parts. There are no legitimate sources for iPhone parts.
Now that you opened it yourself, Apple won't touch it in or out of warranty.

Dropped 5th gen. now touchscreen won't respond... Help?

I dropped my 5th gen ipod (for the 10th time) ... now my touchscreen wont respond. Anyone know a fix? (already tried the reset)

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Photosmart Plus b209 - won't see networks, won't run WPS, wireless light ON

Hello.
So I've had a Photosmart Plus b209 for the past three years. Never had a problem. Suddenly I switch my router to a Linksys e2500 and everything stops working.
I've printed network tests; my printer has no IP address, even when I revert to factory settings. Though the printout tests indicate the printer can "see" my network, I am not able to get it to detect it via the touch-screen menu. WPS also refuses to work, either prompting an error message or a time-out. The wireless light has been on this whole time.
I'm on a Mac, running OS X 10.8 (Mountain Lion). I'm starting to get very frustrated. What can I do?

Status of the blue wireless light on the printer, on, off blinking? Verified you are connected to your SSID with correct password? What is the IP of the printer?
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

HT201406 I pod-touch touchscreen does not respond, when try to slide the slidder to turn unlock the device it won't respond

Hello,
please help. when try to slide the slidder to turn onlock it won;t respond.

Try:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod
If still problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store.

USB Mice Won't Respond

I've tried 4 different mice on this laptop, as I prefer them greatly over the eraser head and touch pad, and none of them will connect.
1 is a Targus, wired mouse that worked last week, and suddenly does not anymore, and the other 3 are Microsoft wireless laser and optical mice. All of them use a USB to plug in, as my laptio doesn't have any of the circular mouse ports.
I've tried changing the batteries, finding software from Microsoft, Control Panel Hardware-Adding, Troubleshooting, Rebooting, Disconnecting and Re-Connecting, and now I'm all out of ideas.
The wireless mice has receivers that keep a steady green light, but the mouse itself won't budge.
http://tinyurl.com/mouse1 is the 1st wireless mouse, where the receiver will keep a constant green light and the mouse won't respond.
http://tinyurl.com/mouse2 is the 2nd wireless, where the receiver will blink green when i hold down the butotn, but will stop once i let go, and I have tried to oress the connect button but that won't do it. The red laser on the bottom stays lit, but it simply won't go anywhere.
http://tinyurl.com/mouse3 is the new, fresh out of the box wired mouse that worked for several days, but now will not work. I plug it in, the laser comes up underneath the mouse and stays on, but the cursor will not move. I tested it on another laptop where it worked just fine. I'm not sure where on the computer I should be looking to find how to fix this.
I've looked at the BIOs, but have had no such luck. Running on Windows XP Pro. Any and allhelp s appriciated.

I HAVE THE SAME PROBLEM WITH MY LENOVO SL500 NON OF THE MOUSE IS WORKING LAST WAS VX NANO LOGITECH.
DID YOU FIND ANY SOLUTION
please help if you got answer from someone.
Moderator Note; Members e-mail address removed for privacy
Message Edited by andyP on 02-17-2009 08:57 PM

My Itunes logon keeps popping up and won't respond to my password

My Itunes logon keeps popping up and won't respond to my password, everytime I try and log in or cancel

So you already wiped the old backup and started again??
If that is the case it did a fresh full backup ok?
How much free space is on the TC now?
Do you happen to have multiple network links? Meaning do you have TC bridged to the U-verse router.. with both ethernet and wireless working at the same time. I discovered this one all by my loansome.. having multiple paths does not seem to worry most things on the computer.. but it totally kills TM.
I had the same sort of thing happening in testing a TC I am fixing. So I have multiple ethernet and wireless. The incremental backups became extremely slow.. by turning off wireless and one ethernet so there is only one route to the TC.. it flys again.

My iPad mini touchscreen won't work and the screen is stuck on Choose A Wifi Network....Can Somebody Please Help Me

MY Ipad Mini Touchscreen Is Not Responding. It Won't Let Me Type In My Password When I Tried It Then Said That It Was Disabled For 1 Minute. Then I Tried It Again It Said Disabled For 5 Minutes. then I Tried To Reset It, I've Tried Recovery Mode NOTHING! Now The Screen Is Stuck On Choose a Wifi Network...Can Someone Help Me Please

If it has NEVER been jailbroke, here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this.

HP6500 suddenly won't work wirelessly

Like many others, I've found that the printer locks up and won't respond or print, and has to be forcibly shut down (by unplugging) before it becomes usable. We've decided we're stuck and have learned to live with this, since the device doesn't see heavy use.
In the last 24 hours, however, it won't respond even then. The power on/off button works, I can send faxes directly from it, but I can't access it by going to its IP address.
I've redone the wireless setup from the panel directly on the printer. It finds the router, takes the password, and connects. But I can't navigate to it from the computer by typing in the IP address. If I look at the router's configuration menus, the printer shows up there as "PC Name:HP08C76A". A ping test does connect. But I can't print to it. We're running Windows Vista (but have also tried with an XP laptop).

Sorry this is happening, however, you are not alone. Sometimes this will help:
Let's set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you know what that is, set an IP outside that range but no higher than 254 (the last number in the address). If you do not know this, enter the current IP address.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Leave the gateway and DNS blank. Click 'Apply'
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

IPad 1,1 won't respond when connected to any computer, except 1

[IPad 1,1 won't respond when connected to any computer, except 1]
Symptoms:
-iPad shows no sign of recognition of being plugged into computers
-screen does not light up, if sleeping
-ipad will not turn on if turned off
-ipad does NOT say "not charging"
-ipad does NOT have lightning bolt in battery
-does not sync
-computer does not see it
-computer does not see in itunes
-windows device manerger does not see it
-If VM IS turned in mac osx the "connect to mac or windows" dialog box DOESNT appear
-iPad WILL charge IF plugged into wall using ANY cable.
-iPad will connect and act completely normal with PCG-R505DL
stats:
iPad1,1 -(warranty expired over a year ago)
-works with:
-PCG-R505DL(broken?)(old)(638MB RAM)(1GHz processor)(runs windows 7)(designed for windows xp)
-doesnt work with:
-MacbookPro9,2(8GB RAM)(2.9GHz i7 Processor)(turbo boost to 3.7GHz)(osx 10.9, windows 7 Bootcamp)
-IBM Thinkpad(1.6GHz Pentium M Processor)(single core)(1GB Ram)(runs windows 7)(designed for windows xp)
i have:
-imported the HDD from PCG-R505DL to IBM Thinkpad and installed the required drivers(didnt work)so i moved it back
-installed new copies of windows to bootcamp and other two computers(same results)
-updated all computers itunes, checked firewall, no virus software installed
-used 5 USB cables, all from apple, all work with other iDevices
-tried to restore(sucessfull on working computer), no effect on the others
-tried it on my friends new macbookpro (no effect)
-neither my iPod1,1, my iPod3,1, nor my dads iPad2,1 have any issueswith this(or other) problems
(the "1" computer menchioned in the description)(PCG-R505DL)
-is exibiting signs if imnent failure, ex. hdd cable going bad, ethernet not working, wifi card going out, CD Drive Useless, freezing, rebot doesnt work, crashing (none of these issues are present if HDD is plugged into other computer, so not a virus)
i have been having problems with this for about a year now, and ANY help is Welcome

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/ts1503
 Cheers, Tom

Nano flashes constantly when plugged in, won't respond.

My new nano worked great for about 2 weeks, then all of the sudden it won't respond or turn on. When I plug it in the screen simply flashes on and off with the apple logo. I've tried restarting it and resetting the settings and everything else recommended, anyone know what the problem could be? Or expierence something similar?
Any advice would be greatly appreciated.
-thanks
-nick

I'm doing that right now, the nano is hooked up, flashing, and the ipod updater is searching for it, its been going on for about 30 minutes so far......
I should also say that, although my ipod instantly lights up and starts flashing when I plug it in, it is not recognized in my computer and obviously not yet by ipod updater

HT1212 iphone screen won't respond

What should I do for an iphone 4S screen that won't respond? Bring it to the Apple store or cell phone store?

Hey kelsey413,
Thanks for the question. I understand you are experiencing issues with the touchscreen of your iPhone 4S. The following article will help to troubleshoot this issue:
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/TS1827
Resolution
If your device is experiencing any of the symptoms listed above, try the following steps:
1. Restart your device
- Hold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
- If you can't restart your device, reset it by pressing and holding the Sleep/Wake button and the Home button at the same time for a least ten seconds, until the Apple logo appears.
2. Clean the screen with a soft, slightly damp, lint-free cloth.
3. Avoid using the device while wearing gloves, with wet hands, or immediately after applying hand lotion.
4. If you have a protective case, or if you are using a plastic sheet or film on the display, try removing them and testing the device without it.
If the steps above don't resolve your issue, please schedule a service appointment with an Apple Retail Store for evaluation. If an Apple Retail store is not an option, contact Apple to find out your best service option or see the Service FAQ for your product.
Thanks,
Matt M.

HP Officejet 7612 won't connect wirelessly since Windows 10 update

Update: I have the IP Address settled. I actually think it isn't a wireless problem... because the blue light is on the wireless symbol on the printer. When I get to the install network printer stage, it takes ages, and then says "unsuccessful network installation" so that is the real problem. Whether that also means the wireless connection between the printer and the computer is not established I am unclear. So hope someone can help Thanks Selene

Hi I am stuck. When I first set up my HP Officejet 7612 on the same computer I am using now, everything went fine. I set the printer to print wirelessly and it worked great. I didn't use the printer for a week. Then I upgraded to the free Windows 10. Was running Windows 8. The computer- laptop is only 7 months old. Today, day two of operating Windows 10, the printer won't print wirelessly. The print window came up as if I was sending a fax, and there was no HP Officejet 7612 in the drop down menu of printers, just the Fax HP Officejet 7612. Problem solving done to date:Deleted HP software off laptop and reinstalled everything. Still on wireless connection.Re-set printer to default settings and re-set up wireless on printer using the wizzard. Still no wireless connection.Rebooted internet. Didn't help.Printed HP Network Configuration Page and noted IPv4 IP Address was different on page one to page two. Tried 'other' IP Address, system told me that definitely was wrong.Retired original IP address - no improvement. In the middle of all this trouble shooting, I realised that the initial IP address that the printer gave me at the very beginning of this problem was one digit different to what it gave me tonight when I sat down to try and fix this issue. I am about to try the this discovered IP address. But if anyone can help, I would really appreciate your assistance. I am just stabing in the dark now. Thank you for your time. Selene

MBP 13" died and won't respond.

My MBP (bought mid 2010) died this morning (the effect was as if I had held down the power button to shut down) while I was using it as normal and now won't respond at all. Battery is holding charge as indicated by the lights and tried 2 chargers which appear to work fine. Suggestions? Cheers

Valuable lesson learned - on notebooks, in particular, AppleCare can more than pay for itself. Sorry you had such a bad experience: computers (all and any brands) can go belly-up at any time. I had a 2006 MBP and it's still running somewhere in Minnesota. But all aren't that lucky.
If you need your particular machine, then the £400 is likely well spent. But you always have the option of putting that £400 towards the purchase of a new machine. And if you do that, get AppleCare next time.
I'm sympathetic but I've just been one of those lucky few who in 27 years of owning Macs have had no hardware problems...
Clinton

Wireless radio is not functioning on C7250. Reboot didn't fix. #6 didn't fix, wireless light is on

Wireless radio is not functioning on C7250. Reboot didn't fix. #6 didn't fix, wireless light is on, Vista 32 bit, Win 7 32 bit, D-Link DIR-625 router. Worked great for 2 years. Diagnostic says Contact HP support. Other functions work fine. Prints via USB all right.

Thank you for your suggestions. I appreciate your help.
I had previously verified that the wireless radio was on. The wireless radio test report confirmed it was on.
I had not used the network settings reset function as I was focused on looking for a "printer reset" capability. Based on your suggestion I used the network settings reset and then printed the HP Network Configuration Page. This confirmed the settings had been reset. However this test also checks for all available 802.11 networks. The report shows the number of networks discovered as 0. Based on this, I'm assuming the wireless is still not working.

HP8610 Touchscreen Won't Respond - Wireless Light is On

Similar Messages

Maybe you are looking for