Hpc309a series printer prints to small, need to enlarge

printer prints to small need to enlarge print

I got the printer to print faster now that the new driver is installed. Now it only prints about 10 inches of my image and then scrolls out the rest of the paper in white....this is not good. HELP!!!!!

Similar Messages

Flex PDF Printing too small need 8 1/2 x 11

I am using Adobe Flex with IBI's WebFOCUS Enable. Once I export my SWT file to Adobe Flex in PDF format works fine on the screen until I print. Printing on 8 1/2 x 11 paper shows up in the lower left hand bottom about 4 times too small. I heard it has to fit Adobe flex pallet or be shrunk. Is there some conversion software to remedy this? Please adivse. Joe

Quick look at the "save as" feature has a list a mile long, including vector, autocad, xml, and more. Personally, I haven't used the program beyond playing with it and researching to discover it cannot do dates with the time period I need (though I imagine there might be a way to manually create the dates).
I've found Timeline Maker, and it looks like it can do what I need without a large learning curve. However, I would very much like to learn how to work most effectively in InDesign (rather than spread my learning across several programs). I do have a subscription to Lynda.com, and I have worked through a few tutorials, but I didn't apply what I learned immediately thereafter...and it seems I've forgotten much of what I learned!
If you have any recommendations for a novice working with InDesign CS5 who is trying to make a print book with maps, timelines, and perhaps an ebook with animations, I'd be grateful.
Presently, I'm setting up files to correspond with my outline. (Trying to manage chaos.) Any input in that regard would be appreciated. Since I'm working alone, I don't have the benefit of seeing any "industry standards".)
Thanks again,
Stacy

I have mac os 10.7.4 update for hp photosmart c4100 series printer (printer needs a driver), where do I find a driver?

I have mac os 10.7.4 update for hp photosmart c4100 series printer (printer needs a driver), where do I find a driver?

The last driver that Canon released for the iP6600D was v10.51 for OS X 10.7. You could try downloading and installing this driver via this link.
Note that the driver may not be digitally signed so Gatekeeper will block its installation. To get past Gatekeeper, you can right-click on the installer and select Open from the pop-up menu that appears. You will then be given the option to install the driver.

I don't know if this is a Firefox problem so I ask, When printing how come it always prints so small I nearly need a magnafing glass? Is this caused by something else I may have set incorrectly? help please, from a very satisfied Firefox user

I don't know if this is a Firefox problem so I ask, When printing how come it always prints so small I nearly need a magnifying glass? Is this caused by something else I may have set incorrectly? help please, from a very satisfied Firefox user

This only happens when I'm in my browser. Ex. when I'm on a site and I decide I like what I see and want to print it text that is, my printer always prints tiny. When I'm in Microsoft Word for ex. I print it and it looks like what I expect. So I don't know if somehow my printer got set to print tiny when on the web. If you can help me I would be most appreciative. Thanks again for your response.

The HP Deskjet 3050A All-In-One J611 series printer I just bought is not compatible with my Mac Book Pro. What do I need to do?

I recently purchased an HP Deskjet 3050A All-In-One J611 series printer and it is not compatible with the version of the operating system on my mac book pro. I am currently running on OS X 10.4.11 and the printer is compatible with v10.5 or higher. What can I do to update the operating system on my Mac Book Pro?

10.5 will be harder to find & more expensive, I think I'd go for 10.6
Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)
Apple no longer has it for sale.
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 2GB at least)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It looks like they might still have it...
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA

Constant Printing Restart on a networked HP Officejet Pro 8500 A909N Series printer

Hello,
I'm curious if anyone has run into this problem before. I have a HP Officejet Pro 8500 A909n Series printer that I have setup as a network printer. This has been accomplished through a print server.
I installed the printer's drivers based upon the cd that came with the printer, in the box.
The problem is that whenever a user prints, say it's a simply one page document... the printer will repeatedly print that single page until it runs out of paper. I have stopped/restarted the print spooler. I've rebooted the printer and the print server. I have deleted the drivers and readded them. I've tried installing drivers from HP's website and then installing those. I have attempted to delete the printer from the server and start from scratch.
When I monitor the print queue, I can see the service restart after each document prints. I can't figure out how to get this to stop.
Does anyone have a suggestion; or has anyone run into this problem? I'm not sure which forum to put this in. I chose the Networks/Wireless forum, even though this is running on a wired network with wireless disabled.
I certainly appreciate any asistance.
-Craig

It ended up being an issue with the port. I had used the same port as the last HP printer that I replaced. This printer needs to run on a TCP/IP port, and not an HP port.
Problem solved.
Oh, and it was wired, with wireless disabled.

How do I print from my iPhone on my HP7510 e-All-in-one series printer

I need instructions in order to print e-mail and photos on my Photosmart 7510 e-all-in-onbe series printer from my iPhone 4s

There are several ways you can accomplish this you can use E-print for instructions on how to do this; GO HERE
You can also use this GO HERE Airprint for this one the device (IPAD, IPOD, IPhone) and your printer have to be in the same network Same router. For a detailed explination what is the difference on this apps reffer to this article
Hope this helps and let me know if can be of your assistance any further;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

I have an hp photosmart c7280 all-in-one series printer won't print. error message, system problem

I have an HP Photosmart All-in-One C7280 series printer/fax/copier/scanner. I have been having issues with printing for the past few weeks. It is a wireless printer, with a jack into the wall (for fax) and it is plugged into a power source. I never used to have issues with it before, but recently, it won't print when I send a document to it to print. It will print its configuration pages, reports, etc if I select them from the Printer's menu but not when I send a doc to it to print. First it was saying it was offline, but I figured out how to override that by operating as an administrator and selecting "Use Printer Online" from the dropdown menu when I right clicked on the printer from the control panel. But now it says "Error: Printer failed to print document. System error".
Noooo clue what to do now. This is the only color printer we have so we kind of need it to work. We bought this printer off the shelf at a office store (before I started working here) and so we don't have any designated technichians to work on it. I asked the guy who services our Image Runner Copier to look at it but he had no clue what was wrong with it. Hopefully someone can help?

goestherain,
I need to know what operating system you are using to helps narrow troubleshooting a bit, what OS are you running?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

How do I direct my HP Photosmart e-ALL-IN-ONE D110 series printer to my Android Tablet?

How do I add my HP Photosmart e-ALL-IN-ONE D110 series printer to my Android Tablet?

Hi,
Given your ptinter supports print from Android, you need an app called HP ePrint. Please use Google Store to install it:
https://play.google.com/store/apps/details?id=com.hp.android.print
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I have an HP PHOTOSMART 7520 e-ALL-IN-ONE SERIES printer purchased approx. 5 months ago.

Where can I get instructions as to how to use my printer for photos. There is a small tray and I have inserted the oorrect paper. I attempted to print a photo on a letter size sheet - and I indicated the size - it came out only as half a photo. So I tried to print it using the small sheets and it printed it small but on one of my regular letter size sheets. And the colour is coming out orange . . . HELP . . . I need instructions. Thank you!
This question was solved.
View Solution.

Hey maryjane41,
I see you are looking for information about printing photos with your Photosmart 7520. Please see the document linked below on loading special media types in this printer.
Loading Plain Paper, Photo Paper, and Envelopes
As well, take a look at the "Print" section of the User Guide linked below.
http://h10032.www1.hp.com/ctg/Manual/c03456524.pdf
Hope this helps,
Jason
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Hp laserjet 1005 series printer drivers

hp laserjet 1005 series printer drivers

This worked for me in windows 7 professional 32bit SP1. Fresh install. I like my printer, I have used it for many years under both linux and windows and I had no intention of throwing it away. I am pleased I have found a way to make it work, I would have surely never bought HP again otherwise.
How to make a HP LaserJet 1005 series work in windows 7 32bit
1. download the printer driver HP LaserJet 1005 Host Based Driver v 5.51.2103.0 released 6 Oct 2003
Right now it can be found here: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?cc=us&prodNameId=214539&prodSerie...
It is named lj1005hostbased-en.exe - md5sum 428274e8060e830aeaf1acf06f10a398
2. Extract the printer driver to a folder. (It is a winzip self-extract executable)
3. Go to the printers page and "Add a new printer". It will ask you to select a port, but not an USB because USB devices are automatically detected. Scroll down and select "Virtual USB port" (not sure about the naming but you'll find it)
4. In the installation of this virtual-usb connected printer you can say "I have the driver". Click on the button, point the printer dialog to the driver folder and select the .INF file in the directory (there are two, I used the first one). You will successfully install a second printer named "HP Laserjet 1005 series"
5. Now right click the real printer, which has the same name but has the warning triangle because it needs "troubleshooting" - it has no associated driver. Select Troubleshoot. It will look for drivers. Skip looking online it is just a waste of time. NOW IT WILL FIND THE DRIVER YOU INSTALLED FOR THE VIRTUAL PRINTER. CLick OK.
6. The danger triangle disappears, the virtual-usb printer with the same name disappears and you are lef with a printer named HP Laserjet 1005 series which... works!
Cheers.

My Photosmart D110 series printer prints random documents all on its own

I turned on the my Photosmart D110 series printer after being away for a few days and discovered that it was halfway through installing an update that I hadn't ordered. I quickly aborted this process, but not before the printer began relentlessly printing random documents from my files; as soon as I cancelled, it began printing another. The print queue is empty. I uninstalled and reinstalled. I downloaded and ran the HP Print Doctor, which says all is OK. I unplugged and unplugged some more. And it still does it. My operating system is XP 2002 (yes, I know, I know...). Do I need to throw in the towel and get a new printer?

missnan,
The printer will only print what the PC sends to it, so I would look more into your pc than the printer. What you might try to do is uninstall the printer and re-install, but keep in mind that the pc is sending those print jobs to the printer. Are you sure that the printer is printing files from your PC, this printer does have apps and it can be set up to print those on a daily basis.
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

Prints too small on HP Inkjet 2800, prints too large on Adobe PDF Printer

I have been having this problem with all Macs in my network:
Whenever I need to print anything on my HP Inket 2800 printer, from either InDesign or Illutrator, it will print really small, even though "fit to page" is unchecked, size is at 100% and page sizes are correctly chosen. It will even ignore the Position settings (if I choose centered, it will print on upper left). If I export the PDF it shows fine and I can print perfectly through Acrobat.
If I choose to print over Adobe PDF, I get the opposite: InDesign will enlarge everything a lot and maintain the paper size for some reason. This way, I can't use Print Booklet to generate PDF files.
I have tried reinstalling the HP printer drivers, without success.
Any ideas?
Thank you.

Just got off the phone with Adobe and found a cure.
Open print dialog box.
Go to Set up
the paper size: scroll to top and select defined by driver.
It worked for both the HP 8150 and Xerox Phaser 7700
I'm running CS3 on Mac Intel G5 OS X 10.5.5.
JIm

Print too small, tried everything (I think..)

Hi
I recently installed the driver for this printer from the HP site and replaced some empty ink cartridges. So, printer now prints.
Trouble is, whatever I do in Preferences, or in Word, Acrobat, anything, the page prints too small and centred. The setting in preferences is A4
When I ask the printer to print the TEST pages, i.e the 'Self Test Diagnostic Page' and 'Print Quality Diagnositcs Page' they are both perfect and the correct size.
I am using an older version of Mac OS (10.4.....) but not had trouble before.
Any help/advice would be greatly appreciated. Many thanks.

Hi @migrations
If I am not mistaken, you need to increase the font size within the program you are printing from. Be sure not to increase the zoom, the font size needs to be larger for the print size to be increased.
You may also see a scale to option, or fit to page, in the print preview, this might help too.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Trying to print very small picture on HP C7280

Hi,
I am trying to print a picture of my son to go into a tiny frame mounted on a ring. The problem is, the finished product needs to be about .6" x .75" and I don't see where I can go (if I can) to get the dimensions to print this small. I have edited the photo so that it appears this small on my computer, but the smallest option I can get the printer to print is 3x 4.92, which is obviously way to large. Any help is appreciated.
Thank you!
BG

How you enable double-sided printing can depend on the applications from whick you wish to print. Example: if I print to my HP PhotoSmart from Safari, I get this print dialog box:
(Edit: OOPS! Note that I forgot to switch printers when i took the scene-shots, so ignore the "Brother" reference. It's should look the same for your HP.
Note the selection labled "Safari" near the bottom. If I change that form "safari to "Layout: I get this:
Note the option for two-sided printing appears for your selection. If I print from Word, the box is different:
The "Copies & Pages" option can be changed to "Layout" when you click it, again allowing the selection of two-sided printing.
If you tell us what applciaiton is vexing you, we may be able to give better-focused information.
A

Hpc309a series printer prints to small, need to enlarge

Similar Messages

Maybe you are looking for