Hpc310 stopped updating at 2of2 with 1 sec left
my hp c310 printer would only print very lightly , i cleaned then vents on cartridges and tried to update on web and it stopped at 2 of 2 with one second left.
Thanks
I phoned my local support shop and the know this problem.
Will go there this afternoon, if they can fix it right away
it will be a fast one.
Otherwise the n73 will be replaced; they told me it had to do with bad soldering of the hardware. During FW upgrade these problems pop-up, they do not occur during normal operations......
Bye, Joris
Similar Messages
-
Hi, when ever I'm using 3G, on my Iphone4 sim stops working and network is lost, this started after I updated my phone with 6.0.1(10A523)version. Please help how to solve this problem. Thanks.
Photos/videos in the Camera Roll are not synced. Photos/videos in the Camera Roll are not touched with the iTunes sync process. Photos/videos in the Camera Roll can be imported by your computer which is not handled by iTunes. Most importing software includes an option to delete the photos/videos from the Camera Roll after the import process is complete. If is my understanding that some Windows import software supports importing photos from the Camera Roll, but not videos. Regardless, the import software should not delete the photos/videos from the Camera Roll unless you set the app to do so.
Photos/videos in the Camera Roll are included with your iPhone's backup. If you synced your iPhone with iTunes before the videos on the Camera Roll went missing and you haven't synced your iPhone with iTunes since they went missing, you can try restoring the iPhone with iTunes from the iPhone's backup. Don't sync the iPhone with iTunes again and decline the prompt to update the iPhone's backup after selecting Restore. -
I just updated my iPhone with the newest update IOS 6.1. My old Apple ID keeps popping up on my iPhone for me to type in the password that I no longer know. All the passwords I type in do not work. I no longer have access to this email which is my old Apple ID. After installing the newest software update my old Apple ID came up to finish configuring. Since I no longer have access to this Apple ID and email account and after trying some passwords I skipped the step. It then said FaceTime, iCloud (which I do not use), and more may not work. I clicked that it was OK since I could not remember the password to my old Apple ID. I then went to my settings to be sure my newer email was my Apple ID by typing in my current Apple ID and password. Also, I went to Manage my Apple ID online and my old Apple ID could not be found. Is it OK I skipped that step in the IOS 6.1 configuration? How do I get my old Apple ID to stop popping up?
Blue
It sounds like you restored from an old back-up. Did you back-up just before your software update? It will use your last one and if your last back-up was a ywear old then it will use that one.
In general, if you are getting these messages on your iPhones select logout (when you get that Apple Id request) and then log back in with your newer ID.
Sorry for your losses.
Cheers -
in the middle of my last update it stopped updating in the because of an unknown source, and now my screen on my iphone is frozen with the apple logo and a loading bar. Help??
Unknown "source"? Do you mean unknown "error" followed by a number?
http://support.apple.com/kb/TS3221
Follow the instructions in the article. When you connect your phone again, you may have to press both the home and sleep/wake buttons until the Apple logo reappears, then continue pressing the home button until iTunes detects the phone in recovery mode. -
i have problem with my iphone 3G that stopped updating with ios 4.2.1 currently almost every app requires ios 4.3or higher. what do i do with my iphone
App developers decide on what iOS versions to support with their apps. Also, Apple has identified certain updates that are necessary for particular applications. The only way to continue using certain apps on the iPhone 3G is to not update your apps if they require a higher iOS to operate. When you get ready to update an app, it will say what iOS is works on, and if it requires higher than the iOS you have, do not update. The only other alternative is to replace the device with a newer model.
-
My ipad has stopped updating apps. It doesn't even ask for password, it just oges to the apps screen showing empty progress bars. I've re-synced account and restarted but with no luck. Other than deleting the apps is there anyway around this?
OK. I will work backwards.
You certainly don't want to have to delete apps every time that they need an update, for any number of reasons. Losing data first and foremost would be a drag, but the overall hassle would be absurd. All things being equal, you should be able to update apps in the future after you delete them and reinstall them. I delete and reinstall apps all the time and I am also able to update them when updates are available for the apps. I just wanted to know if you had any success in any fashion installing apps.
Resyncing/refreshing the Apple ID/iTunes account wouldn't seem to be the issue either if you can download apps or other content from the iStores. Your ID is being accepted.
That leaves us with I'm not sure what. But I think I would try this trick fix and see if it helps.
Go to Settings>General>Date and Time>Set Automatically>Off. Set the date one year ahead. Try to update the apps again. If you get an error message, go back to the settings. Correct the date and time (set automatically) then go back and try to update the apps again. -
I owe 27 dollars on itunes and i got a 25 dollar itunes card if i were to update my account with my new credit card would the 27 dollars be deducted from my credit card or would the itunes gift card pay for the 25 and my card would pay for the $2 left.
Generaly, if you have an iTunes card and a valid credit card, you have the option of charging your purchases to eiher one or the other? By default, it goes to your iTunes card, but you can override that.
-
Help needed I updated my ipad2 with iOS5 but few of my dashbaords (HTML5) are not working now ,can any one let me know how to downgrade the OS as we have a meeting coming up .. its urgent
Downgrading the iOS is not supported. If you are using Safari this try clearing its cache via Settings > Safari.
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
HT201210 Stopped updating mid-update
Hi
Please Help!
My iphone 4s has stopped updating mid update to Ios6 because of dodgy cable connector to my macbook.
My iphone however is linked with a dell computer.
As he update stopped mid-update the itunes instruction tells me to restore to setting and then choose last back up - but i don't know if it will have backed up last to macbook or my own computer. how can i find out with my iphone switched off?
help!
thanks,
charlotte.with itunes open click on itunes in teh top left cornor of the macbook, click prefences and then device see if it backed up on that computer
-
PCI-6602, How to convert Pulse Width to RPM and stop updating datalogging at 30 RPM
Hi all,
My objective is to stop updating data logging pulse width measurements at 30 RPM so I can record the time lenght it takes the RPMs to stop from 6000 to 30 RPM. When I turn off the tool. I have an encoder attached to an output shat of a 6000 RPM circular saw. I have created 3 program methods, but I was not able to stop at 30 RPM. The last pulse width value the data log updates is around 200 RPM. I don't know if I'm using the right method to read RPMs?
System:
1) NI-PCI 6602 Counter/Timer Card
2) SBC-60 Connector Block
3) TRD-S1000-VD Encoder. 1000 PPR
4) LabVIEW 8.5.1
5) PC Dell Precision T3400 (32-bit), Intel Core Quad 2.4GHz, Memory 2GB. Windows XP prof.
In method 1: I reading pulse width and converted to RPM with this formula. RPM = 60/(1000 PPR/ Pulse Width).
In method 2: I just measuring pulse width and try to stop while loop when pulse width value is greater than 0.002 mSec. by using this formula 60sec/30rpm = 2 sec/rev, 1 Rev = 1000 counts. Therefore, 2 Sec / 1000 Counts = 2 mSec/Cnt (0.002)
In method 3: I measuring pulse width using this formula, Pulse Width (in Sec) = Count/Counter Timebase Rate (20MHz), One period is 1000 cnts X 0.002mSec = 2. Therefore, Pulse Width = 2 / 20MGz = 0.000000100
All three methods stop recording pulses around 200 rpm. I wonder if the formulas I utilizing, are not using them properly. Or there is floating point number conversion???? Please See attached Picture.
Any help is greatly appreciated. THANKS!!!
Carlos G.Charles_DeJesus,
Could you check the output waveform of the encoder? Do you see spikes? Sometimes spikes might produce wrong counts.
CarmenC -
my computer was restarted and now i want to connect and update my iphone with a new itunes. how do i do this without losing all my stuff on my iphone?
i didnt get a chance to back my phone up before the comp crashed
will i lose any of my stuff?When you open iTunes and plug in iPhone (iPod) to computer, it appear in the left bar. Then just simply right click on you iPhone (iPod) and choose Transfer Purchases, this should copy your purchased items to your computer.
Hope this help -
Can anybody out there tell me how to update a MacBook with OS 10.5.4, to at least OS 10.6.6 ? When trying to update from the
Apple menu, it stops when configuring to install. I´v let it run overnight several times, no go. Help me !Start by checking if your macBook can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
(NB: PowerPC applications can still be run in Snow Leopard using Rosetta, but they will not work in later versions of OS X.)
The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
http://support.apple.com/kb/DL1399
Check via Software Update whether any further updates are required, particularly to iTunes (you will need the latest version in order to synch with mobile devices). -
Hi,
My iTunes is set to automatically update podcasts and keep the last five episodes of each podcast.
However, iTunes appears to stop updating podcasts after several (five?) unwatched episodes and gives me an exclamation mark in the podcast overview. Clicking on that, I get the message: "iTunes has stopped updating this podcast because you have not listened to any episodes recently. Would you like to resume updating this podcast?"
This is not what I intend... and not what I told iTunes to do... (at least this my reading of the below settings)
This stopping is rather less then ideal: (1) if I am going away for two weeks, which I often do, I would still like to have the last five days of news, not the last five days of news back from the date I left, (2) I need to click update for approx. 20 podcast on regular basis, (3) my iPhone is synced to iTunes as soon as I come home, if iTunes does not have the podcasts downloaded, they are not copied over to the iPhone, and the iPhone will attempt to download the episodes via 3G next time I play the podcast on the go, (4) I am mainly using iTunes functions, such as smart playlists and podcasts, through another app (Plex, a fullscreen media player) and it is a pain to have to go to iTunes to manually do things. That is why this bothering me...
How can I get iTunes to behave as intended? (From reading through old posts I know that there is a Doug script adressing this problem, which I have just set up, but I would prefer to use internal settings if possible... maybe I am just missing a setting)
Thank you for your ideas!Thank you for the response, Roger!
OK, that's how it is then.
The iTunes podcasts settings should be reworded in that case because it suggest something different from what it does. And, of course, it would be ideal for Apple to make this more flexible and allow users to set up their podcast downloads in their way and not be so motherly (c'mon, Apple, your users are not as dumb as you think, and they have uncapped Internet connections these days anyway)...
Btw., for anyone interested, this is external script I am using now:
http://dougscripts.com/itunes/scripts/ss.php?sp=updateexpiredpodcasts
Including the "cron job" setup here:
http://dougscripts.com/itunes/2011/12/updated-update-expired-podcasts-v2-2-and-l aunchd-project/
Cannot tell how well it works because I have just set it up, other members of the forum say it works for them...
If anyone knows of in-app solutions, please share... -
IPod wont stop updating when ipod is connected, wont update on itunes 7!
What is honestly wrong, every time i update my ipod now with itunes 7, it wont stop updating and it says its updating but it isnt, why is it doing this with itunes 7???
I am having the same problem, did you get an answer on how to correct? Every since I downloaded the update, the update keeps going and there is no way to disconnect the IPOD button there anymore..
-
I have a new issue with Mail where it stops updating. I have it set up with my Gmail via IMAP and have it set to check for new mail every minute. I do not have any input managers installed for Mail.
I will often get new mail and Mail won't notify me. I can see it at the Gmail website, but it won't show up in Mail. Right clicking on the dock icon and picking "Get new mail" does not work, nor does right clicking in mail and picking "Synchronize Gmail". No errors appear and Mail plays the "no new messages" beep.
However, relaunching mail will fix the problem, but only temporarily. So, it shows the inbox as empty, but if I relaunch mail, it will get the new mail and synchronize fine. This tells me that my account information is entered correctly because Mail can connect, it just stops working occasionally until I relaunch it. This is an annoyance because I can't rely on it to tell me if I have new mail.
Anyone else have this problem or have any help for me? Any help is appreciated.
Thanks.I don’t know how to solve your problem, but telling
Mail to go offline, then online again (Mailbox >
Go Online/Offline) might also work and you may
find it more convenient -- you can put a button in
the toolbar for that.
That seems to do the trick, and it's definitely a lot easier than shutting down Mail. Thanks for the tip!
Maybe you are looking for
-
Can I create an interactive page w/ CS4?
I have Creative Suite 4 Design Premium and am currently learning via Lynda.com and using the programs - I have fair to pretty good knowledge of all of them but Flash. I've been asked to create a 3d interactive page for a friend, in which the viewer c
-
when ever i click a picture in photo booth it does not automatically update its content is this a bug or i don't know how to do it? whenever you click a picture in photobooth you have to manually insert it one by one in iphoto i want to know is there
-
hi, I need to develop a report for pay roll. one of the field called "Net Sal" from a cluster. How do i retrieve data from the clusters? Thanks & Regards Chetana
-
i have just recently started using itunes (Version 10.2.2.14, 64 bit, windows 7). I want to use the itunes dj, but it does not appear in the playlists (neither does party shuffle or any other similar thing I've read about). This is the pc I have all
-
Has anyone been able to download it or happen to know what the problem is?