HPC7200 NEW INK CARTRIDGES NOT SHOWING FULL

Can someone help me? I have only used genuine HP cartridges in my printer. Over the last three installs I noticed that one particular color (triangle blue - not sure the colorname) shows a little over half full and it is a new cartridge. My printer is a few years old and has been kept in excellent condition. Is there anything that can be done. I feel if I get a new cartridge it is only going to show the same thing as the current one.

I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.
If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Similar Messages

C7280 NEW INK CARTRIDGES NOT RECONIZED

I bought a pack of all new ink cartridges. I was only going to replace the ones that were empty but after I got errors saying that the dark blue was now too empty I decided to change them all to new. It still says that the dark blue is empty and the dark pink one went from almost empty to totally empty. It tells me on the main screen that I cannot print because the blue one is empty but not the pink one. BUt if I go to the ink levels it shows both are empty. All of them are new. I tried to do this reset solution that I found on another post that has to do with holding down the # and 6 and that didn't work at all. I do see that there is a little splash of blue around the blue cartridge. I seriously need to get the printer working because I have to print out shipping labels. Thanks to anyone that can help me out.

Hi dizdevil1
What results do you get when you check the ink levels?
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00414934&cc=us&lc=en&dlc=en&product=447851&tmp_...
Have you contacted Phone Support about this yet?
Thanks, Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

New ink cartridge is not being recognized

I just installed a new ink cartridge in my np officejet pro L7580. All the ink works great except the black.

Ok, I just figured out so I´ll post it here in case someone has the same issue. I turned off my iPod while connected to the computer. Afterwards, the "other" connection showed up again in the device manager but this time it stayed there without disappearing and with the exclamation point on. I then proceed with one of the instructions in this posting to install the driver for the apple mobile which then showed up in the USB section of the hardware (it was never there until now). Bingo! I got my iPod Touch to connect for the first time! But seriously, why should it be so hard???? I'm concerned with the number of postings here. It looks as if Apple is selling the hottest toys but not be the best ones in terms of quality...

HP Officejet Pro 8500 A910 - all new ink cartridges, black and blue ink not printing?

HP Officejet Pro 8500 A910 - all new ink cartridges, black and cyan ink not printing?
Cleaned printer heads w/no luck.

Welcome to the forums @corAtrum1 ,
I read your post about your Officejet 8500 no longer printing in black and cyan ink. I would recommend that you try out the steps in the guide below for this problem.
I hope this helps!
Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
Have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

New black ink cartridge not working

I have installed new ink cartridges and all the colour ones work but the black will not print out. Level of ink is fine, touching where the ink comes out is wet and black as is where it goes in on printer, but will not print out black at all only colours. Any ideas as to why?

Hi tagelbecky,
The post located here should help to resolve your issue.
Please let me know if I can be of any further help.
Many Thanks,
Francheska
Although I am an HP employee, I am speaking for myself and not for HP.

My eprinter will not print in proper clolour even after new ink cartridges install cleaned nossles p

my eprinter will not print in proper in colour even after new ink cartridges installed cleaned nossles as new cartridges still not printing properly
This question was solved.
View Solution.

Which printer do you have specifically? HP makes several eprinters and I want to make sure I get the best information for you that I can.
Also, have you tried doing a self test print to see if the issue is hardware related versus being software related?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Brand new ink cartridges, cleaned, still not printing

Recurring problem on this printer, nothing helps. Brand new ink cartridges, cleaned the inkheads twice, read though solutions for de-clogging the vents. Able to print documents fine this morning, now---nothing. Black ink not printing. Frustrating, this is a recurring problem and am tired of going through more ink. Ran alignment, just says "alignment failed" but no solutions offered/no troubleshooting given. Suggestions?

Hi @OL5,
Welcome to the HP Forums!
I see that your HP Photosmart is not printing black. I am sorry to hear this, but happy to help!
For further assistance, I will need to know:
The Product/Model Number of your printer. Follow instructions in this link. Finding Your HP Product Model Number.
If the printer is connected, Wireless, or USB.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
If you are using genuine HP ink cartridges, or refills.
Once I know this information, I will be happy to do some further research for you.
Thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

PRO8600 Not recognizing new ink cartridge

I just changed the cyan cartridge in my Pro8600 printer, as I have previously done with no problem. However, the printer is not recognizing that the new cartridge has been installed. After closing the door and allowing the machine to cycle through its initial process, the window again appears stating that the cyan ink is empty and must be replaced to continue printing. I've removed the cartridge and reinserted it several times to no avail. I've also tried a second new cartridge, again with same results. Any ideas?

Hello bryantk37127,
Welcome to the HP Forums.
I see that you are having an issue with the ink cartridges not being recognized in the printer.
I do have a few suggestions that we can try in the attempt to troubleshoot this issue.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I have also located a document that deals with this issue as well as other errors. Please click on the following link for when An 'Ink Cartridge Failure,' 'Incompatible Ink Cartridges,' or 'Ink Cartridge Problem' Error Message ....
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Why won't printer acknowledge new ink cartridges

i have windows 7 (64 bit).. HP Officejet 6500 Wireless.. I can print from computer and can copy ok but i have changed all ink cartridges and the printer isn't seeing that it has new ink.. it shows all colors are out?

I think you have the wrong forum.
I'll answer anyway.
Are the new cartridges new original HP cartridges? If not they might not report ink levels correctly.
Please mark the post that solves your problem as "Accepted Solution"
Sometimes it takes several posts back and forth to get to a solution - please be patient.
I am employed by HP

How can I get my HP DeskJet 6540 to recognize the new ink cartridges I installed?

Hi everyone. I have an HP DeskJet 6540 printer and I replaced the ink cartridges. After I replaced the cartridges, I aligned them and then did a test print. I noticed that the blank ink didn't print. I opened system preferences, and then I opened the printer utility. It says, "Device Status : Pen Failure." Current Supplies Levels says, "The current levels for the selected printer are shown below...Cartridge on the left (tri-color 97) is unknown and the the cartridge on the right (black 96) is missing." Oh, I forgot to mention that the print cartridge light on the left side is flashing. I went to the HP support website and it says that the problem could be an incorrect print cartridge, incompatible print cartridge, or problem with the (left/right) print cartridge. The solution they offered was to remove, inspect and reseat the problem cartidge. It also said to clean the problem cartridge contacts. I did that and it still gives me the same results. I even reset the printer but still got the same results...
So the next thing I try is the OTHER cartridges listed as compatible with my printer which is 94 (black) and 95 (tri-color). I bought the new cartridges, placed them in the printer and I still got the same message from the print utility. I took the latter cartridges back and got a refund and explained that none of the compatible cartridges are working with my printer. I kept the 96 and 97 cartridges in the printer and the light on the left continues to flash so now I'm here asking if anyone knows how I can get my printer to recognize the new ink cartridges I installed? Are there any other solutions that I have besides throwing the printer out of the window? :-)
Thanks everyone ;-)

With all that you have done it does sound like the printer has a fault. If you haven't tried turning off the printer for several minutes, then this would be worth trying (maybe you have done this when you say reset the printer?).
If the cartridge light on the printer flashes when you turn the printer back on then it sounds like a hardware fault - not the driver or the operating system. And this is not usually something a user can resolve so it would need repair. And for the cost of a new printer, why would you bother.
If you plan of sticking with HP and getting another model that can use the 96 & 97 cartridges (let's face it, they often cost more than the new printer), then take the two existing cartridges to the store and see if they will let you check they are okay. No point throwing them out also if they still have a fair bit of ink still in them.

New ink cartridges in Deskjet 5525 but black won't print or prints in light gray

I installed new ink cartridges. Black prints as very light grey or not at all in some instances

Hi @rhare
I see you are having troubles with your black ink.
Please complete all of the steps in the following document; Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages Although I hope this resolves the issue, it might not. As you have a 5525, If the issue persists, I would suggest calling HP Phone Support, even if your printer is out of warranty, as you may require a replacement printer.
The number to call HP is 1-800-474-6836 for Canada and US, or you can Contact HP Worldwide.
Please let me know if the document resolves the issue, or if you called HP and the outcome of the call. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

New ink cartridges installed

I have installed all new HP940 ink cartridges color and black. It is telling me ink is low and won't print.

Hi @NAN7541,
Welcome to the HP Forums!
I understand that your HP Officejet pro 8500 printer is saying your new ink cartridges are low and will not print on Windows 7. I am happy to help!
I would suggest to go through this guide, Fixing Print Quality Problems for the HP Officejet Pro 8500 All-in-One Printer Series (A909).
If the guide does not resolve your issue, then please call our phone support at 800-474-6836 for your replacement/upgrade options. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

I've just enabled match and now my new purchases do not show up on my i tunes account. i can only play them buy going in to purchased playlist.

I've just enabled match and now my new purchases do not show up on my account. I can only access them buy going into purchase playlist?

SADLY not as i downloaded an upgrad to my original PAGES/
i have in the meantim had to open www.icloud. then from there import the file that i am working on and then check on ipad if it uploaded/ yes it did.
but what a waste of time as it doesn not save any changes done automatically back in the cloud....
i am now downloading the new LION and hope that it will fix the problem
i cant find any other way. I was lead to believe that you wrote, it saved automatically, on to the cloud, you then opened anohter device in anotother country even, and the new file was there, waiting, in its latest version.......
and the same magic was supposed to happen in reverse.
It doesn't/
if i have to open a browser, go to www.icloud....why on earth did they not just leave us an icon to drop it in in that case?
I hope the new lion will help resolve the isssue/
any other ideas> keep em coming...thank you so much.

I have a Ipod touch and recently added new music to my itunes library on my laptop. When I sync with my ipod, the new music does not show up on my ipod even though the sync process seems to be working.

I have an Ipod touch and recently added new music to my Itunes library. When I sync with the library, the new music does not show up on my ipod. The sync process seems to be working and there is still plenty of space on the Ipod for new music so I'm not sure what the problem is!

What happens when you try to sync?
Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
Do the songs play in iTunes?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Do you have any Restrictions (Settings>General>Restrictions) set that would prevent syncing those songs?

In IPhoto I changed movie dates after thumb nails were created in IMovie but the new dates are not showing up in IMovie. Is there someway to refresh the IPhoto event in IMovie?

Background: I'm transferring file folders from a Visa laptop via an external hard drive to my IMac. In the folders are photos and videos from different cameras. SO I first tried to import to IMovie but it would not recognize any of the files. So then I imported into IPhoto and both photos and videos were imported and I created events for each folder. When I first opened IMovie I had to wait for it to create "thumb nails". Then I could view the events in IMovie BUT the video clips are not together because they have vastly different dates and are mixed with videos from other events. I looked at the dates and said I can fix that in IPhoto which i did but those new dates are not showing up in IMovie. I think I need to somehow refresh the event data that Imovie is using but have not found how to do that in either IPhoto or IMovie.
I'm doing this on three events with about 100 photos and videos. But I have many 1000s more to do so need to know how to either fix this or delete these events, reimport, change the dates, then open again in IMovie. I'm sure that would work but I can't understand why changing the dates in IPhoto is not being reflected in IMovie.
Appreciate any tips or pointers.
OBTW this is my first question as a first time Apple owner.

It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

HPC7200 NEW INK CARTRIDGES NOT SHOWING FULL

Similar Messages

Maybe you are looking for