HPCM - Manage Database not creating outline in Essbase application

Question

Hi,
I've created the HPCM application from EPM 11.1.2.1 and I have also created the Stages, POV , Drivers and assignments but I cannot do data entry since the Essbase cube outline itself is not created.
I've gone to Manage Database -> "Deploy Now" several times to no avail . The Application and the Database gets created in Essbase but when I open the outline it is Blank!
My taskflow keeps showing the Status as "Done" but result variable as "Failed". Can anyone suggest what I'm doing wrong here? Or is there any setting/configuration in HPCM or Essbase that I need to set before I Deploy the HPCM application Calulation database and Reporting database?
Below is the Taskflow message I get :
Taskflow Participant Summary
Id wf-1330001062632 Application HPCMCG
Taskflow HPCMCG_DeployCube_D20120223T074416_e3f Initiator user1
Started Feb 23, 2012 7:44:22 AM Status Done
Description Run Now button initiated workflow
Participant Stage Name Status Result Variable Status Message Completed
user1 CalcCube Done Failure Action failed Feb 23, 2012 7:51:16 AM
Edited by: user8540032 on Feb 23, 2012 5:28 AM
Edited by: user8540032 on Feb 23, 2012 10:24 PM
Edited by: user8540032 on Feb 23, 2012 10:28 PM

Answer 1

Hi,
I've got the solution. To solve this problem, you would need to configure the registry of the PC where HPCM client is installed with:
TcpTimedWaitDelay
Registry key=HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
Data type=REG_DWORD
Default value=0xF0 (240 seconds = 4 minutes)
Valid values=0x1E to 0x12C (30 to 300 seconds)
MaxUserPort
Registry key=HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
Data type= REG_DWORD
Default value=20000
Valid values= 5,000 to 65,534 (port numbers)
In order to do this , you would have to do the following :
1. Create a new REG_DWORD value named TcpTimedWaitDelay. Set the value to decimal 30, which is Hex 0x0000001e. This value sets the wait time to 30 seconds.
2. Create a new REG_DWORD value named MaxUserPort. Set this value to at least decimal 32768 or 65534.
3. Create a new REG_DWORD value named MaxFreeTcbs. Set the value to decimal 6250. (The default is 2000 so you are basically tripling this value.).
4. Reboot the machine for the new settings to take effect.
Regards,
Jonathan