HPcompaq cq 57 fan not wokring properly

Hello,
Here lately I have been recieving this message that my fan in my compaq prisario cq 57 isn't working properly. I recieve this message every time i boot up my laptop, I have tried fixing it with canned air, but it seems to have made it worse as it made a weird nose. I'm guessing the fan needs replacing, but I'm not sure, I'm hoping it's fixable. If in any event I do have to replace the fan any idea where I could buy one online? And what model or voltage would the fan be? How would I find that?

Try a hard reset as follows:
1) Remove the battery and unplug the DC power adapter.
2) Press and hold the power button for more than fifteen seconds.
3) Plug in the DC power adapter (leave the battery out for now)
4) Press the power button
Please post your positive or negative results here in your thread.
Replacing the CPU fan requires complete disassembly of the notebook. Compaq presario CQ57 notebook Maintenence & service guide. You will need to discern how your notebook is configured (Discrete or UMA graphics) and whether there is an Intel or AMD CPU installed to purchase the correct fan assembly for your notebook. Do be aware that if you have no experience doing this, then you are accepting the risk of turning your notbook into an expensive paperweight.  I recommend that you use youtube disassembly videos or Insidemylaptop.com for a source for  tutorials on how to do this.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

  • Error 90B - Fan not working properly?

    Hello, this is my first time here so please excuse me if I posted this in the wrong section.
    First, general specs:
    HP Pavilion dv6 Notebook PC
    Windows 7 Home Premium 64-Bit
    BIOS:  InsydeH20 Version CCB.03.61.09F.21
    Processor:  AMD A6-3400M APU w/Radeon HD (4 cpus ~1.4GHz)
    6g RAM
    (If anything else is needed to help me ask, and I shall post it)
    Last week I received an error 90B for my laptop's cooling fan.  I was playing Guild Wars 2 and in the middle of playing my laptop shut down suddenly.  When I turned it back on it presented the error I'm asking about.  The thing is, the system wasn't overheating in the slightest and the fan was working just fine before it shut down.  I've tried many fixes proposed on HP's website and from a couple of friends:
    -Compressed air blown into the vents
    -System restore to a point where the fan worked
    -Hard reset
    -BIOS update
    None of those proposed fixes worked.  However, I did find something that fixed it...for about ten minutes.  I fiddled with the Catalyst Control Center and set my CPU power back to its default 1400 MHz, and I shut down my system.  After I restarted it I miraculously didn't get the 90b error!  You could imagine how happy I was.  I shut it down one more time to see if the error was truly fixed, but lo and behold it showed up again.
    The only change that could have caused the issue was me downloading a program called SpeedFan to monitor my system's temperature (I did NOT (I repeat, DID NOT) change any settings using the program - I purely used it to monitor the temperature.)
    I cannot afford to have a repairman replace or look at my laptop as of now, we have bills to pay and food to get, and I absolutely NEED this computer to function.  I have work to do, and classes to sign up for, and we have no public computers for miles.  Please help me!

    Not every fan error is a heat error. There is a sensor that detects a bearing that is wearing out or spinning that is out of round. You can sometimes limp it along for 6 months before the fan absolutely has to be replaced. When it does you will not be able to get past the error. 

  • System fan not working properly

    i have a hp 15 notebook 15-r004ne  laptop and when i turn it on, it states the fan is not working correctly, then shuts down after 15 seconds or continues to windows if you press enter. I dont know what to do now please i need help .
    Answers will be appriciated.
                                                           Thank You.

    The fan may simply be clogged with dust, pet hair,etc. Pick up a can of compressed air and use it to blow out all vents really well.
    If the problem continues try a hard reset.Disconnect all external devices first.
    1-remove power cord and battery
    2-press power button for 30 seconds
    3-reinstall only power cord for first startup.
    4-power on
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Cooling Fan Not Working Properly

    Hello,
    i have an HP Pavilion g7 laptop and when i turn it on, it states the fan is not working correctly, then shuts down after 15 seconds or continues to windows if you press enter.  I cleaned all the air vent with compressed air and still get same mesage when i power up.  The computer seems to work fine otherwise, but sometimes the fan will run at rather a high speed all night even when it is supposed to be "asleep" with the cover closed. I have to make it hibernate to ensure that it does not run all night like that.  Do I need to replace the fan and if so, how?
    Thank you!
    Rick

    Yeah im having the same problem with the same laptop. Im kinda pissed about this because the first month i owned this laptop, that same fan broke and i had to send in into HP to be replaced. So now here we are again with the same part broken.
    My friend also bought the same laptop at the same time as me and his fan also broke. So clearly this is a defective part.  Not only that but they broke my keyboard during the fan replacement.
    So HP are you actually going to do anything about this because i was just on your FB page and repeatedly got ignored by the chick TINA who runs the page or whatever.
    So im not too happy at this point, so whats gonna be done about this HP?

  • Fan not working properly

    I have a hp dv6-3060si laptop and when i turn it on, it states the fan is not working correctly, then shuts down after 15 seconds or continues to windows if I press enter.  I cleaned all the air vent with compressed air and still get same mesage when i power up.  how do i open the unit and check/replace the fan myself?

    Here is the Service Manual:
    Manual
    Also good old Youtube:
    https://www.youtube.com/watch?v=suPJX9SKIr8

  • Laptop cooling fan not working properly

    i have a hp g62-457dx laptop and when i turn it on, it states the fan is not working correctly, then shuts down after 15 seconds or continues to windows if you press enter.  I cleaned all the air vent with compressed air and still get same mesage when i power up.  how do i open the unit and check/replace the fan myself?
    This question was solved.
    View Solution.

    Hello Dragon58,
    I understand you’re experiencing overheating issues with your laptop.
    Here is the service & maintenance guide for your computer. Go to page 77 and that will give you the instruction on how to get to the fan.
    Let me know if you have any questions.
    Thanks
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • Nvidia 560 Ti one fan not working properly

    I have a 560 Ti card which has worked well for the slightly over 3 years that I've had it, although yesterday when I turned my computer on I noticed a noise coming from my computer which turned out to be one of the fans on the graphics cards. It begins spinning, gets up to the speed of the working fan, then there is a sound like a motor revving and it stops spinning completely. This happens when I'm idling on my desk top and my GPU is about 40 degrees celcius.
    If I launch a game and my GPU goes up to 50-70 degrees celcius the sound actually stops. The fan in question begins spinning continuously, but at a lower speed than the other fan on the card.
    I figure this is some kind of fan motor malfunction but I'm not positive. I know there's programs that can control the fan speed on a GPU, are there any that can control them separately?

    no, you can't control them separately
    you have to replace the FANs, both at once
    or replace the entire cooler

  • CPU Cooling Fan not working

    Hi,
    CPU Cooling fan not spinning and showing error on startup saying fan not working properly.MY HP Pavilion G6 laptop's Product number: B0P25PA#ACJ and Serial number: [edited by Moderator]. I want to replace the same. Can anyone tell me which model of fan would be appropriate?
    Thnks in advance.
    Thanks,
    PSantra

    Hi @Psantra ,
    Thank you for visiting the HP Support Forums. I'm sorry to inform you that your post has needed some editing to remove personal information such as the Serial Number in your Post. From our Rules of Participation:
    Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
    If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
    Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
    Thank you
    George
    I work for HP

  • Cooling fan is not operating properly.

    I am using hp pavilion dv6 3123 tx with windows 7 ultimate os installed. I recently updated the bios via hp support assistant  and i don't know whether the bios is updated or not and after two  days ,I got a message while booting the system that the cooling fan is  not operating properly and it also shows the error message code (90b). Is it safe to use the laptop with a external cooler pad and my laptop is not getting heated too much while using with the cooler pad but before updating the bios too my laptop used to get overheated and it took time to boot. Before updating too i got blank screen while booting up and while playing games it  hung too.
    I don't know the error message occured was due to updation of bios or not and i also need to know can i use my laptop for final year project work with external cooler pad.can i give my laptop for service.

    Hi
    Please find the link given below might help you to resolve your issue. In case the issue still persits kindly request you to call HP Technical support check the warranty and get the Fan replaced.
    Reducing Heat Inside the PC
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • HP-HP, the fan of the laptop is not functioning properly

    Product name:HP-HP
    Windows 7
    Operating system : 64 bit operating system, RAM (4.00 GB)
    I encountered the problem this morning. When i boot on my laptop there was an error message showing that the fan of my laptop is not functioning  well and therefore i should visit this site for support. Thank you.

    Hello duckzilla2009, welcome to the HP Forums.
    I see that you have a message on your notebook about the fan not working correctly. I will try to help you with this.
    If you could, please provide the Model and Product numbers for your notebook.
    Here are a few documents that may be able to help you with resolve the error message related to your fan.
        System Fan (90b) error message on startup - if you're getting that specific message follow this document.
        Error: CPU Fan Failed - follow this one for any other fan error message or if the above didn't correct the issue.
        Reducing Heat Inside the PC to Prevent Overheating - I'm providing this document, as steps involved could help you with the fan. If the notebook is overheating it would be putting a lot of stress on the fan.
    Start with that and let me know how things go.
    I worked on behalf of HP.

  • Windows 7 Brightness and Function key not Working Properly

    i have HP 15-af024AU APU Quad Core A8-7410 - (4 GB DDR3,1 TB HDD) Noteboook and it  came with windows 8.1 preinstalled than i installed windows 7 ultimate.
    i have problem in Display Brightness i am not able to change Brightness by function key or by manually from windows settings.
    2. my Function key are not working properly . all key are fliped whiout holding function key it work as function key. 3. bluetooth is not working when i search for new device not able to find any available discouable bluetooth device. 4. wireless button software is not wokring in windows 7 i already updated my bios that available in drivers support and install alll drivers too properly so please give proper drivers for windows 7 for this product that works perfect.

    Sorry that driver didn't work. You can try this graphics driver and if that doesn't work, unfortunately, I won't be able to help you with that issue. This package provides the AMD High-Definition (HD) Graphics Driver and Catalyst Control Center for supported notebook models that are running a supported operating system. For notebooks with switchable graphics modes, this package includes drivers for both graphics processing units (GPUs). Switchable graphics enable users to switch between a power-saving graphics mode (normally used under battery power) and a high-performance graphics mode. If high-definition multimedia interface (HDMI) video output is supported, this package also installs the HDMI Audio Driver. File name: sp71253.exe As far as the Fn keys being 'flipped,' I have no idea what you mean by that, or what to do about it. Did you install the software that controls the funtion keys? This package contains the HP System Event Utility, which enables special function keys on supported notebook models to be programmed. For example, HP System Event Utility enables users to press the Fn+ESC keys to view system information. This software works with the supported operating systems. File name: sp71156.exe

  • Some HTML Emails Do Not Display Properly

    Recently, some HTML emails do not display properly in Mail. All I see is HTML. Yet, 98% of my HTML emails render properly.
    Any thoughts on why this happens with some emails? Is it a Mail issue or are these emails not coded properly?

    Hello Tony.
    Could be a combination but since Mail renders 98% of of all HTML messages properly (using Safari as the engine), this indicates it is a coding problem.
    I'm not a big fan of using HTML with email since it introduces a number of problems. If everyone used Plain Text for message composition, the majority if not all problems experienced with email would be eliminated.

  • My query is not executing properly after applying patches(bi.7

    iam working bi.7 support package 13
    after applying patches
    my query is not executing properly in production my problem with FI queries
    the query is executing properly but ihav created newformula using formulavariable that fields are not getting data in report if i click on currency conversion iam getting popup but currency translation coversion list is not coming and currency type(target currency also not dispalying)
    but if i execute same query in development its working properly newformula fields are getting data and currency conversion also working in development
    can u please help me in this issure
    i hope as soon i will get solutions from bw gurus

    That currency conversion problem is solved
    i checked TCODE:RSCUR IN PRD its not showing any details
    again i checked in dev and moved all currency types dev to production
    now its wokring
    i hope check with this it will work

  • Disk not ejected properly notification after upgrade

    Hi,
    I have a 500GB Western Digital external drive configured for Time Machine. I recently upgraded to Mavericks, now when my computer goes to sleep I get the dreaded "Disk was not ejected properly" message. With Mountain Lion I have experienced this issue when my macbook pro goes to sleep when running a vm in Parallels, but never at any other time.
    It wouldn't really be a big deal, but I am connected to a thunderbolt display and when I wake the computer up, I have to unplug the thunderbolt cable and plug it back it in to get my thunderbolt display to turn back on. This is a real pain!
    Not sure if this is a bug or configuration issue. Perhaps I might need a third party app like Jettison.
    Please help.

    Thanks for the info. I reset the SMC and my mbp starting acting very funky. I started experiencing some odd behaviour with my internet connection, so I shutdown my mbp and left it off for at least a minute. When I rebooted I was able to connect wirelessly and hit the sites I could not before.
    All good; however, I noticed that my external drive was showing as a usb device and not Time Machine drive. I selected the external drive from the Time Machine prefrences and now all seems to be working fine.
    I think this was the actual issue I was experiencing after upgrading. I don't think the SMC reset was necessary in this case, but I gave it a shot because I had noticed the symptom of fans running frequently when there is minimal load and proper ventilation. 
    Thanks.

  • Key board of dv6 is not working properly

    dv6-2106eo model number and product: wd366ea#uuw,Windows 7 64-bit,
    key board use to malfunction like if i type a the cap lock goes on , if type d something else comes on screen(some of those keys are working fine but some are totally mixed up ), previously it was fine but once i tried to clean the fan with pressurised air  without opening any of those screw ( dit it from outside ) then it happened , any suggestion will be welcomed 

    Hum. Cleaning off the keyboard with air should not have made the keyboard not function properly. I would recommend working though this document to make sure the keyboard language is set up properly:
    Incorrect Characters are Displayed when Using Keyboard
    Let me know if this resolves the issue. 
    Thanks!
    Sean
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Maybe you are looking for

  • Default open dwg files in Illustrator CS6

    I frequently use dwg files in Adobe Illustrator, so I set dwg files default program to Illustrator CS5. We recently upgraded to CS6 and when I opened it, it didn't update the default program. I tried using the "open with" menu. Illustrator CS6 doesn'

  • How to add youtube link?

    I'm desperate to add a youtube link to appear as the video itself !! how to do that ? I always copy and pasted youtube embedded code into HTML code; however, I don't know how to add and edit html code in here

  • I have problem with i phone 4 use ios 7.0.4 i use phone 4 year with this soft. block my phone constantly

    i use iphone 4 years and i never meet problem.when i upgrade on ios 7 i have problem every moment block my phone some app dont work propertly pleas help or i must change phone .

  • Ajax call in portal

    Hi All, I am trying to make an AJAX call using XMLHTTPRequest object like this XmlReq.onreadystatechange = HandleResponse; myURL = "AjaxServerPage.aspx";                refreshURL = "<pt:url pt:href='"+ myURL + "'/>";       XmlReq.open( "GET", refres

  • Renaming copied song *need help*

    I'm importing one song from a different place on my Mac, though I need an identical copy of it in iTunes, but with a different name. I drag the song in twice to iTunes for my 2 copies. I change the name of one, and it affects the other, so I can't ge