HPE-400f running but no picture or beep/manuf defect mother-board/should'nt HP fix it?

This is the letter i just sent to the HP CEO.
PLEASE HELP!
I have been trying to get to the bottom of my HPE-400f problem for months now, and now I found an article disclosed by HP, that my model is included in the models that have a MANUFACTURER's DEFECT!
I believe it stated that the ongoing defect was with the mother-board.
I am hoping you will help me, because I am trying to avoid having to call India, and be put on hold for 1 hr., like the person that give me the link for the recall did.
I purchased my PC on 01/12/11, with the 2yr. extended $120.00 warranty,
Hp states they are adding 1 yr to that, but that still puts me out of warranty for like 7 mths now.
Why was I not notified by mail, that my investment in an almost $900.00 HP PC, had a DEFECT?
I hope that you will help me by doing the right thing, and taking care of this problem for me?
If you will, I will continue to be a loyal HP customer, as I have been since the 90"s.
If I have to pay, to fix HP's screw-up, I will NEVER have another HP product no where near me!
This Manfactured Defect, is the same thing to me, as an automobile recall.
I have to take my Toyota Prius in now for a problem, which has been recalled!
Of course , there will be NO-CHARGE at all, for this was their screw-up!
Please put yourself in my position, have some compassion/sympathy, and treat me the way you would want to be treated.
Please respond as soon as you can. I have been w/o this PC for some time now.
I have already purchased a video card replacement, due to its fan not working, and a power supply, because I thought maybe that was my problem, until I found HP's recall on the motherboard.
Here is the link to the RECALL information, that was NOT sent out to their customers!>>>>>>>http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03199423
Thank you for your time, and hopefully for your help!
Christopher Scott
If anyone else has been though this problem, PLEASE let me know!
Thanks!
Please feel free to email me directly.
      [edited personal information by Moderator]

Hi @scottsphoto ,
I have sent you a private message. If you are not sure how to check your private messages then this post has instructions that will guide you through the process.
Regards,
George
I work for HP

Similar Messages

  • I use "hdmi to component converter" to connect apple tv with my old plasma tv by component cable. Sound is ok but the picture split 2screens left and right. Still can't fix it. Anyone can help or has any idea? should I try convert to av?

    I use "hdmi to component converter" to connect apple tv with my old plasma tv by component cable. Sound is ok but the picture split 2screens left and right. Still can't fix it. Anyone can help or has any idea? should I try convert to av?

    Your TV hasn't entered some odd picture in picture mode has it with  two 'inputs' side by side?
    AC

  • Error message "Firefox is already running but is not responding" - I have read and action the KB - no fix

    So before we start - I have read the KB (https://support.mozilla.org/en-US/kb/firefox-already-running-not-responding) and actioned the advice on how end the processes, delete the parental lock, etc. This gives a temporary but one time only fix and does not resolve the overall issue.
    I have also uninstalled and reinstalled the application.
    So why do I get the Error message "Firefox is already running but is not responding"?

    See also:
    *http://kb.mozillazine.org/Profile_in_use
    Note that in Firefox 13+ (expected to be released June 5) the parent.lock file is no longer deleted after closing Firefox to make it possible to check for startup crashes, so the presence of that file will in the future no longer indicate a problem.
    Create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    *https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If the new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • OSX: FF running, but no windows open - clicking on the dock icon should open a new window.

    Running OSX 10.5.8, FF3.6.10. If I close all FF windows, but leave FF running, I should be able to open a new FF window by clicking the dock icon. This doesn't work - it just brings FF to the front, but no windows open. Any ideas how I can fix this?

    Is an external display connected and turned off? If not, open Mission Control. Do you see the window(s) in any other spaces?

  • I restored my new iphone 6 from my iPhone 5 iCloud backup but the pictures from my camera never restored. How do I fix this?

    Just purchased an iPhone 6 and during setup I restored from my iPhone 5 iCloud backup.  Everything  seems to be there but my photos that I had taken using the iPhone 5. Is there a way to get them back?  Most of my pics are synced with iTunes but the last few months had not been.

    Hi leebl79,
    It sounds like you may be having some issues finding your Photos after you have updated to iOS 8. Try using the information in the following article to help you resolve this issue:
    Get help finding your Photos in iOS 8
    http://support.apple.com/kb/HT6464
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • I'm trying to watch a movie and it shows that running but I have no picture

    I can see the bar at the top of the screen running but the picture is black. Itunes is set as my default media player. I can't figure out whats wrong? Can anyone help me? I'm trying to view on a Dell P.C., Thanks!

    Quit iTunes (from the menu). Do you have that movie on the Mac? Of yes, option-click choose "open with" and open with Quicktime, when it does not play, download VLC (http://www.videolan.org/vlc/index.html) , install it and do the "open with" with VLC. If it does not play, the movie is corrupted.
    Lex

  • HT3964 Computer comes on but no picture

    I have imac intel core2 duo 2007, it comes on and you can hear the fans run but the picture does not come on.

    Startup in Safe Mode
    A Safe Mode boot takes longer than a normal boot so be patient.
    Once you are in Safe Mode, click the Apple menu icon top left in your screen.
    From the drop down menu click Restart.

  • 42TL515U green light blinking but no picture or sound

    came home today and turned on my tv wont turn on the green light blinks constantly but no picture or anything can some one tell me how to fix this or what to do?

    Try unplugging it for a few minutes.

  • MSI BIOS Beeps and Mother Board Issues

    Hi gang,
    I am new to this forum. I am a tech at a small town PC store. I have an msi mother board that is throwing an error beep that I have never heard before. The beeps go something like this 1-2 a high pitch beep, then a low pitch beep. The mother board is the MS 6526 Ver. 2. I have tried another video card and the board will still do the same thing. The mother board does not act this way all of the time. Sometimes the machine boots fine and runs perfect. I have noticed that when restarting the machine, the problem occurs there most of the time. the machine will reboot and set there with an amber light on the monitor. I can turn the machine on and off a couple of times and then it will boot and run; this pattern is not consistant. I felt that it could be a bad processor or mother board. Any ideas?
    Thanks

    If the beep code is 1 long beep followed by 2 short beeps then that's indicating a problem with the display card. Perhaps it could even be an issue with the slot itself. If you try a PCI graphics card instead of AGP do you still get the issue? Have you tried a different power supply too?

  • I've got a MacBook pro 15' running 10.6.6. I want to use an external monitor for my graphic design work running Adobe software and thought I'd try an HD TV. I ran a Mini Display to HDMI lead to the TV but the picture quality was disappointing.

    I've got a MacBook Pro 15' running 10.6.6. I want to use an external monitor for my graphic design work using Adobe software and thought I'd try an HD TV. I ran a Mini Display to HDMI lead to the TV but the picture quality was disappointing. I also tried a Mini Display to VGA lead and that wasn't much better. I tried all variations of resolutions in System prefs - Displays but nothing helped. Am I getting something wrong? Thanks all.

    In addition to pixel density, you are up against the translation driver card in the TV.
    If you read the fine print of computer-resolution-capability in the TV user guide, you will see a chart as tall as the manual page.  At the top is the smallest resolution capable, at the bottom is the full use of the 1080p in the TV.
    Mac falls into the top 25% of the page, maxing out at 1366x768 often.  This is because the TV control card is expected to do too much of the work, but is not designed for computer-monitor processing.
    I looked at the resolution charts on 2 TVs before deciding to buy a 1080p LCD monitor that has a TV interface/connector.  Computer monitor first, TV second.  But the thing is only 27 in.  Good thing TV is not as important to me as it is to others.

  • Tried to mirror my iPad to the tv and got sound but no picture. Can run videos but cannot see I pad screenshot

    Tried to mirror my iPad to the tv and got sound but no picture. Can run videos but cannot see I pad screen. Looked on support and it said touch the mirror button but I have no mirror button. What am I missing

    Hi Ginger611, 
    Welcome to the Apple Support Community!
    It sounds like you are trying to mirror your iPad to your TV using an Apple TV but don’t see the mirroring option. Please use the attached article for information on setting up AirPlay Mirroring. 
    iOS: Use AirPlay Mirroring
    Cheers,
    Joe

  • HT1551 I've done all above but still get a black screen on apple tv. i can hear the beep of my remote but no picture, hdmi and tv selection proper... any ideas?

    I've done all above but still get a black screen on apple tv. i can hear the beep of my remote but no picture, hdmi and tv selection proper... any ideas?

    Hello Bluebird,
    See if it's related to this...
    It also seems to be related to later OSX versions, like 10.8.x & 10.9.x
    The 2012 macs (and later apparently) (also later OSX versions on earlier Macs can do it also), not waking normally from sleep after hours being in sleep. (noted here ...
    http://www.xlr8yourmac.com/archives/feb13/022813.html#2012macswontwake
    "Why 2012 iMac/2012 Mac Mini won't Wake After Hours of Sleep (Hibernates/Powers Off)")
    The sleepimage file still reappears even if never slept. Delete it (hibernate off, etc) - within minutes its back.
    A note on that here - http://www.xlr8yourmac.com/feedback/Chameleon_SSD_Optimizer.html
    About iMac sleep...
    http://forums.macrumors.com/showthread.php?t=1529750
    Try this: "sudo pmset autopoweroff 0" and "sudo pmset standby 0"
    http://xlr8yourmac.com/archives/sep13/091313.html#10.8.5SleepEjectTip
    One user reported that the opposite worked...
    Try this: "sudo pmset autopoweroff 1" and "sudo pmset standby 1"

  • Tried to mirror my iPad to the tv and got sound but no picture. Can run videos but cannot see I pad screen. Looked on support and it said touch the mirror button but I have no mirror button. What am I missing

    Tried to mirror my iPad to the tv and got sound but no picture. Can run videos but cannot see I pad screen. Looked on support and it said touch the mirror button but I have no mirror button. What am I missing

    Hi Ginger611, 
    Welcome to the Apple Support Community!
    It sounds like you are trying to mirror your iPad to your TV using an Apple TV but don’t see the mirroring option. Please use the attached article for information on setting up AirPlay Mirroring. 
    iOS: Use AirPlay Mirroring
    Cheers,
    Joe

  • I have switched languages to french but get the "apple" beep sound when I run spellcheck not results at all?

    I have switched languages to french but get the "apple" beep sound when I run spellcheck not results at all?

    You need to select the text and apply:
    Inspector > Text > More > Language > Français
    So Pages knows what language to check it with. Language is like bold or color or font, it is part of the text style.
    Peter

  • My MBP A1226 display went black n no video output. I tried to reset pram n a hard reset still nothing. It boots up drive and volume beeps... It's running but no video. I'm out of warranty, is there something I can do without spending a fortune. Thnx rich

    My MBP A1226 display went black n no video output. I tried to reset pram n a hard reset still nothing. It boots up drive and volume beeps like its running... It's running but no video. I'm out of warranty, is there something I can do without spending a fortune. Thnx rich

    Hi, I have the same computer, same model and same problem with the same diagnosis, with no response from Apple for being out of warranty of 4 years, this is a shame!

Maybe you are looking for