HPE-400Y Soundcard ASIO compliant?

Is the HP Pavilion Elite HPE-440y factory installed soundcard ASIO compatable?

I'm giving this a bump.
I know my crackling problem is old news.
But does anybody have any ideas about the card offering 4090 buffer sizes to a thrid party program and thus practically freezing it's
Message Edited by gracemusic on 0-0-2009 :5 PMMessage Edited by gracemusic on 0-0-2009 :5 [email protected]

Similar Messages

How do I connect logitec 5.1 speakers to HPE 400y?

I would like to have rue surround sound. Is this possible with HPE 400Y?

Hi,
I'm looking at the specs for your PC. It looks like it does support surround sound system.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02481314&tmp_task=prodinfoCategory&cc=us&dlc=en...
What speakers are you planning to use with your pc?
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

Need recommendations: New graphics card for HPE-400y

Hi! I'm in need of a new graphics card, but I don't know which one is best for my computer. My computer is a Hewlett Packard HPE-400y. Click here for specs!
My computers has all the original parts except the PSU and HDD. I recently changed the PSU to a Corsair CX430. The current hard drive is a WD Caviar Black 2TB.
I use my computer for Guild Wars 2, Maya (models and animation), Zbrush, Corel Painter, and Photoshop.
My current graphics card (Radeon HD 5450) has issues playing Guild Wars 2. The FPS is 30 or lower if I try to play the game with medium or high settings. The FPS also drops when I'm playing the group PVP event known as World Vs World. I often have to have the graphics on the lowest setting in order to get 30 -45 FPS.
You can find the Guild Wars 2 requirements here: GW2 official wiki -- requirements info
Click here for Maya 2015 requirements
Click here for Photoshop requirements
Click here for Zbrush requirements
Click here for Corel Painter requirements (When you get to the page, click on system requirements)
Any and all help is appreciated! Thank you in advance for your advice and help!
--srandall

Hi,
You should be able to get a double wide card in your PC. Length may be a problem due to all of the cables. If the space below the optical drive is open then you might try to stuffing the extra cable lengths into that location.
BTW-- very nice photos. Not many will go through the effort to do so.
Consider trying one of the below graphics.
MSI NVIDIA GTX N750 TI and the MSI GTX N750 TF Both of these graphics cards are significantly faster then your existing 5450.
Know what the return policy is before your buy.
You have an excellent Corsair power supply. I would prefer that you had a 500 watt PSU so that the higher performing graphics cards could be tried. This NVIDIA GTX 660 specifies at 450 watt minimum but the 12v amperage from your Corsair CX430 is more than sufficient. It might be worth giving it a go. It's about 50% faster than the above two graphics cards. I typically don't recommend that graphics cards be used with PSUs below the graphics card manufacturer's minimum requirements but the Corsair CX430 should work.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Is my SB Live! Value soundcard ASIO compatib

Is my Creative SB Li've! Value soundcard ASIO compatible?

Propably?
Anyway, you could try
kX Project drivers - http://kb.kxproject.lugosoft.com/list.html
or
Asio4All drivers - http://www.asio4all.com (not a nati've ASIO driver ...)
jutapa

Upgrading a HPE-400y

This PC is so 4 years ago. Im not a PC genious and really need help. I want a better graphics card. With that, I'll need more CPU but not even sure my processor could take 600watts.
So, any help would be great.... here is what Im after.... go ahead and tell me if I'm wrong because I could use the help lol
G

Duplicate post.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

ASIO support in Premiere CS5

Hoi all,
I have an interesting problem.
I installed the trial version of the Premium Production Suite CS5
Everyting works fine.
Just to be clear on this.
I do have audio, on my computer and in premiere and it works.
But now I want to configure my audio hardware and set my soundcards ASIO driver and guess what... its not there.
This is what I did...
In Adobe Premiere Pro, choose Edit > Preference > Audio Hardware. The default driver appears in the Input/Output Device menu as Adobe Default Windows Sound. If an ASIO driver supplied by the sound card manufacturer is installed, it is also appears in this menu.
well, it does not appear in the menu.
Strange because, in my CS4 it works correctly.
There I can select my soundcards ASIO driver and it works perfectly.
So I can choose between Premiere Pro WDM Sound and Creative ASIO.
In my CS5, I only get to see the Premiere Pro WDM Sound setting.
And thats a pain in the ... you know what lol ... because now I'm not able to use my 5.1 surround system in Premiere pro because I'm only able to use my front speakers wich makes it very difficult to mix audio in a 5.1 surround enviroment.
I have a Sound Blaster X-Fi Fatal1ty Professional Series soundcard with the latest drivers installed.
and just to be clear on this.
It works perfectly in CS4 and even in other programs like Magix Samplitude 11 Pro.
Just not in my CS5
Hope someone has some ideas on this one.
Thanks in advance
Fred

Good to know that I'm not the only one with this problem.
Maybe something that can be solved with an update.
In Soundbooth however I can choose my Creative Asio driver.
So I started to go thrue all the relevant software and started to compare my CS4 and CS5 programs.
This is the result:
Premiere Pro CS5 can't see the Creative ASIO drivers (works in CS4)
After Effects CS5 can't see the Creative ASIO drivers (works in CS4)
Soundbooth is able to see the Creative ASIO drivers (also works in CS4)
At this point I even tried to install ASIO4ALL.
Premiere Pro CS5 is able to see the ASIO4ALL drivers, so I selected this and configured the settings, but when I start to play audio in the timeline in a surround setup the output channels are wrong:
Left = Left
C = SL
R = Right
SL = C
SR = LFE
And there's no way in fixing this so that's no option and I un-installed ASIO4ALL.
maybe it has something to do with CS5 beeing natively 64-bit.
But at the moment I can't think of what more I can do.
I even started Premiere Pro CS5 as administrator. No change...
Going into adobes hardware compatibility list for CS5 programs, there's no hardware you can select.
So ...
Hopefully someone with Adobe picks up this problem and is able to fix it or is able to give a workarround.
Fred.

Resettare driver usb mac retina 10.8.2

Ciao a tutti,è un po di tempo che ho un problema con il mio nuovo retina 15".
Ho un proiettore Picopix 1020 che quando avevo la versione 10.8.0 funzionava tranquillamente
all'aggiornamento 10.8.1 ha iniziato a dar un po di problemi e a 10.8.2 non funziona proprio piu.
Quando collego questo proiettore al mac apro il programma esce una schermata blu e si riavvia
in continuazione fin quando non stacchi la porta usb..
Vi chiedo c'è un modo per portare solo i driver usb allo stato 10.8.0?
Grazie in anticipo.

It looks like it has PowerPC drivers:
Software Requirements
-Pentium II 300MHz 128Mb RAM or better, USB socket, Windows 98/ME/2000/XP, approved MME or ASIO compliant soundcard.
-iMac, Power Mac G3 or better with USB running OS9/OSX.
-Keyboard powered by USB (cable included) or 9V DC, 250-300mA centre positive power
Unless you can find updated drivers it may not be compatible.

HP Photsmart Printer D5360 Stopped automatic two sided Printing

Last week I had to purchase a new system. I got a HP Elite HPE 400y. I already had a HP Photosmart D5360 printer that automatically printed on both sides of the paper. Now that it is connected to the new Elite system the option for it to automatically print on both sides of the paper is no longer available to me. I’ve checked and I think I got all the window 7 Drivers installed so I don’t understand why I can no longer print on the two sides of the page without my having to turn the paper around. I’ve checked several times and the module for making the printer print on both sides is installed and secure so this problem is making no sense to me. Can someone please help? I print a very large database often and with it being over 55 pages I don’t relish the idea of having to sit at the printer and turn the pages around all the time.
This question was solved.
View Solution.

The default is the duplexer is set to "not installed", you will need to set the duplexer hardware as installed. See the Vista/Windows 7 Duplex Printing Troubleshooting Guide here for details.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Adobe Reader 10.0.1 hides menu bar when display image is enlarged

I am running an HP Pavilion Elite HPE 400y connected via HDMI through a Sony Receiver into a SamSung XL-2370 LED Monitor. On the HP I'm running Windows 7 Home Premium 64-bit. When I go to Control Panel / All Control Panel Items / Display and set the screen display size to Medium (125%), Adobe Reader 10.0.1 moves the top of the document being displayed upward to hide most of the menu bar. Also, the tools bar is usually unstable. I can't use any of the menu because mouse clicks in the narrow portion of the menu bar that is exposed are ignored. To shut down Adobe Reader I must start the Windows Task Manager with CTRL-ALT-DELETE and then knock it down because the X on the upper right of the menu bar is hidden. When I set the screen display size to Smaller (100%), which is the usual setting, everything works fine. I like using the larger image size (older eyes), but I can live with the normal size. Unfortunately, to change the Windows image size you must log off your session, so it's not something I like to do more often than necessary.
This appears to be a problem with Adobe Reader 10.0.1 not adjusting properly with the larger image size. God knows what it would do if I used the Larger (150%) setting. Maybe there aren't any old people at Adobe who need a larger image. Otherwise, I'm sure it would have been noticed by now.

As far as I know, Adobe Reader (even v7.0.8) isn't Universal yet, which means it [the plugin] probably won't run natively on your Intel iMac unless you run Safari under Rosetta.
Yang

Disc recovery problem

I have a HPE-400y desk top computer. (it was bought eight months ago)00000
I installed two extra hard drives in this system and they all set up and worked perfectly.
One day a few weeks ago... a message appeared in my windows program that my main hard drive.
(the one which came in the computer) had some serious defects and that it needed to be replaced
as soon as possible. I bought a new hard drive, and installed it in the computer.... I used the
three recovery disc's to re-install the HP programs and windows 7. which installed perfectly.
The problem I found was that the installation program had also formatted one of my other
hard drives, which was loaded with files.. and that now I do not get the blue start up screen
of HP's which also gave me the option to go into my bios setup area... I want to go in there
and tell the computer which hard drive to boot up too...
can anyone tell me what the set up F and number is to go into the bios set up?
Or and can someone give me some light on as to why this recovey program not only formatted
the new installed hard drive but one of my other ones also....
Thank you very much in advance for any comments or help.
Monte

can anyone tell me what the set up F and number is to go into the bios set up?
From HP's website:
To enter the BIOS Setup utility.
Use one of the following sections to open the BIOS Setup utility.
BIOS version 6 or less
Turn off the computer and wait five seconds.
Turn on the computer.
When the first screen displays, do one of the following:
Immediately press the F10 key if your computer was built in 2006 or later (came with Vista or Windows 7). Press the key once every second until a BIOS Setup utility screen opens.
Immediately press the F1 key if your computer was built before 2006 (XP or earlier). Press the key once every second until a BIOS Setup utility screen opens.
NOTEn some Compaq Presario computers (before 2002), press the F10 key at the logo screen.
BIOS version 7 or greater
Turn off the computer and wait five seconds.
Turn on the computer.
When the first screen displays, do one of the following:
Immediately press the F10 key repeatedly, about once every second, until the Computer Setup program opens.
Immediately press the Escape key repeatedly, about once every second, until the Startup menu opens. Then press F10 to open the Computer Setup program.
Or and can someone give me some light on as to why this recovey program not only formatted
the new installed hard drive but one of my other ones also....
Any time you install an OS or recovery a system it as reccomended to remove all non-essential, non-original and/or all non-system hard drives and media. This is to minimize failure of the installation, failure of the system recovery and accidental erasure of non-system hard drives and media.
Frank
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Upgrade soundcard on HPE pavilion elite 380t

Hello,
I would like to install a decent soundcard in my HPE-380t, it came with integrated sound and it is not so great for recording music, playing games etc.
I currently have a spare Creative Labs SB0790 PCI Sound Blaster X-Fi Xtreme Audio Sound Card and there is a slot
next to my video card that looks like it should fit this card but it does not connect.
Do I need a pci express sound card this? the pins dont really look like they are the correct size for the slot i have.....
anyone familar with this rig know how I can get a decent card in?
Thank you !
This question was solved.
View Solution.

Your computer has the following slots;
Two PCI Express 2.0 x16 graphics (for graphics cards)
One PCI Express x4 (for cards such as network, sound, tv-tuner
One PCI Express x1 (for cards such as network, sound, tv-tuner)
It doesn't have a PCI slot, so you will need a PCIe card like the one in your second link.
Frank
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Latency issue despite ASIO Drivers and Dedicated soundcard

Hi,
I have recently bought a U-phoria UM2 external USB soundcard by Behringher specifially for recording audio with (vocals) but I am having a nightmare with latency.
I'm using Audition CS6 on a desktop (i5, 8GB RAM, SSD Hard drive) and CC2014 on a laptop (also i5 8GB RAM, SSD Hard Drive).
I've checked the ASIO driver settings and tried lowering the buffer (down to 128, i get glitches with 64), the monitoring still comes out delayed...it's impossible to sing over. I've navigated all the options and menus I can think of and tried all the forums to see if I could get any tips from already answered posts but haven't found a specific case similar to mine (most have standard audio cards or no ASIO driver and seem to have solved by simply installing one of the two).
I doubt this is of any interest to the case but I'm using a Shure Beta 58 and a PG 58 to record.
Any idea on how I can proceed to solve this?
Help would be much appreciated.

darkdragonlon wrote:
Any suggestions?
Yes. Follow ryclark's advice and press the "Direct Monitor" button on the front of the UM2. And yes, pressing the "I" button in Audition does mean that you are trying to monitor yourself through Audition, with the delay (latency) that your computer is causing. You need to be able to listen to the already recorded tracks and hear the vocals you are adding without any processing delays. Direct Monitoring sends the audio from the computer to your headphones at the same time as the signal coming into the interface from your mic, which is also routed directly to your headphones, without first going through your computer.

Dell soundcard does not work, need upgrade?

I purchased a Dell Intel core duo processor E4500 (2 MB L2 cache, 2.20 Ghz, 2 Gb SD Ram, Windows Vista) earlier this year. After I installed Audition 3.0 I received a message that read: Have direct sound Card Driver selected, for best results select ASIO sound card driver". When recording and during playback could only get a very faint volume. On my old Dell I used the regular Dell soundcard and it worked, though without great results. Will changing the soundcard remedy this and if so, are there recommendations for an ASIO soundcard? Thanks! Jim

If you have a free port, I'd go with Firewire instead of USB. Firewire's faster and doesn't get quite as much traffic congestion as USB.
There are tons of great interfaces at many different price ranges.
You might go to www.sweetwater.com and take a look at their inventory. Once you have a few items picked out, call and talk to one of their sales techs about your needs and they'll help you chose the right one.
I just bought some new Mackie MR8 active monitors and a PreSonus HP4 headphone amp from them yesterday. I'd say about three quarters of all my gear was purchased through Sweetwater.

Using VST plugins and ASIO for everything?

Just a thought. Oh how much I'd like this!
To be able to use universal VST plugins and ASIO for everything directly from Windows would be ideal. To put this simply, making the Creative Windows "mixer" a true equivelent of a pro-software mixing app (Ableton, ProTools, Sonar, Cubase, or any other) in terms of absolute control for all Audio effects and I/O.
If Creative won't ever do this even on their next gen cards, somebody or some company that knows a decent mixer setup should write such a replacement mixer soon offered at a fair price (if not free) that will do so with easy, complete, reliable integration.
Long and specific
VST related:
- Use X-Ram to cache inserted VST plugins. Now theres a potential great reason for it since it obviously doesnt use any to cache the I/O bus like ALL OTHER periphials that have Ram caches. Its use is dictated by software, so why not?
- Allow setting some tiny but likely necessary amount of X-Ram as an additional plugin audio I/O buffer. This should be much less than what mixing software needs for this setting since that would all have to pass the CPU.
- Use Creative's processing hardware directly instead of the CPU so VST plugins won't increase CPU usage (within reason of course).
- Yield overhead when using lots or higher-demand plugins if set in bit-match mode. Why waste all that power for SRC when Voxengo R8Brain or plenty of other pro software can do that a million times better and way faster in non-real-time? OK, only Creative could work this one in.
- Why VST plugins? I'd trust my favorite EQ, digital limiter or whatever that has 64-bit float internal precision and oversampling vs. a 24-bit (rounding-error heaven) with no oversampling like the built in Creative ones.
- If Creative has confidence in the quality of their own propriety effects, doesn't have to be VST but simply making them usable as a ReWire bridged devices into most any host with parameter automation controls and all. Obviosly these could have much lower latency than VST that normally relies on CPU processed software code.
- The only argument against this is that some VST plugins have huge latencies. Optional latency delay to keep tracks
- Allow Creatives hardware to insert as a ReWire slave or otherwise bridged device to ASIO-based apps so VST's can be outsourced from demanding more CPU when mixing. I could also add MIDI plugin effects as well.
ASIO related:
- Allow changing any and all audio I/O routing for individual channels on the fly for Windows and ANY software (not just ASIO compatible stuff). Just like in Ableton, Pro Tools, and every other WELL designed "mixer".
- Treating XP itself and any software that normally goes through DX/MME/etc to use this ASIO mixer by making it appear as an insert send/return in the mixer so it can get routed and processed individually to my liking.
- Can insert send/return signals for any DX/MME/etc program to/from any track or #tracks in any combination up to some reasonable limit with pre/post gains. At least several send/returns slots per channel.
- A game that uses ASIO would be sweet. 0% FPS drop. IMO DX/MME/wave-mapper sound sucks. No control, many wasted CPU cycles, and horrible latency.
- Ability to save/load PROGRAM-specific routing chains. Having it so simly running a certain program will automatically insert it how/whereever I specified, if not default, with all relevant I/O settings, including plugins and related settings that were put in the insert send/return path series to that program of course.
- Put real-time SRC, compression encoding/decoding, or any Creative effects as well whereever I want in the signal chain, whether universal to a track I/O or program insert send/return I/O.
- Ability to record tracks or the master likewise.
- No digital feedback possible caused by monitering/recording/routing configs that would be possible in any decent mixing software. Surely not ever from a default setting or made sometimes impossible to prevent like on the Audigy series. Well unless I do something stupid that SHOULD cause feedback. Speak of a truly worthless mixer, this BTW is the ONLY reason I couldn't just go the manual route and run my host all the time, forcing ALL sounds through it for real-time playback with my Audigy. I'm assuming XiFi's Audio-Creation Mixer doesn't have this horrible problem.
- Imagine putting any combination of sounds in 7.1 surround, monitering specific channels to any physical output, or up/downmixing 5.1 as it plays in real-time, etc. any thing like this possible instantly with a few mouse clicks! This would be SO EASY and completely possible to implement, most of the above right onto existing XiFi's as is.
It's not like it would be competing with pro-interface rackmount products so no harm to Creative. I sure as h*ll wouldn't record with any soundcard's analog pre's or unbalanced connections for that matter. Guess I just love the interface and control of a REAL mixer that can do it all.

cusis wrote:
But would it be possible to somehow use the power of the card to take on some of the load of the cpu, users would surely then see alot more benifits from these cards.
I don't see why this isn't possible with enough X-RAM. Why no host apps support offloading VST plugin cache buffers and rendering threads to it? I'm probly returning my XiFi and sticking with my old Audigy 1 until either I blow it up or Creative makes a REAL upgrade with most the aforementioned features that literally COULD'VE been implemented in XiFi's current hardware.
If they do, they'll have my business and many others I'm pretty sure. Creative, if your listening and you want to like triple your sales - PLEASE get a clue and get the software end right. Microsoft or any audio host software developers, heres your (fat) chance if Creative wont do whats really their responsibility.
If ALL apps were forced to pass through ASIO as I mentioned, this could force all apps and games to use part of X-RAM as an I/O buffer no matter what specific support is. The same way a video card can offload ALL video including Windows, not just when running certain games, or even worse, certain audio apps lol that specifically support video RAM and DX performance controls! That would be the stupidest, most worthless idea and why Video Cards don't waste their hardware this way. And yet this is what XiFi currently does regarding audio. Somebody change this SOON.
This would be SO cheap and easy for Creative toss together and implement and would solve EVERYONE's problems and make ALL games at least get SMOOTH AUDIO. He!! Creative could charge $30 extra for it or just push out a new line of cards and itd still be worth it. Creative, did you read that part? More profit$$$ Like a video card upgrade, I EXPECT a night vs. day improvment but as it stands, XiFi is simply a glorified Audigy that costs more but much LESS likely to work right.
More importantly, its use of ASIO (the real deal) remains no less limited than an old Creative card from way back when. If Creative wants their soundcard to integrate with software better, learn from Nvidia/Ati and deliver the goods as they've done it all along.

Can I install nvidia quadro 600/ AMD FirePro V4900 (ATI FireGL) on HPE h8-1220t ?

HP/Nvidia Quadro 600 graphics card hangs w/ blue hp startp screen after installation into HPE h8-1220t.
Error: After installation and startup, just it sounds a 'beep' and after a minute, it beeps again. No further progess w/ HP blue screen.
Notes: Card spec
nVIdia Quadro 600 by pny
Frame Buffer Memory 1 GB DDR3 Memory Interface 128-bit Memory Bandwidth 25.6 GB/s CUDA parallel processing cores 96 Max Power Consumption 40 W Energy Star Compliant Yes Physical Dimensions 2.713" H x 6.60" L Single Slot Low Profile Form Factor Yes Display Connectors DVI-I (1), DP (1) Number of Displays Supported 2 DisplayPort Yes DVI Yes VGA Yes Graphics Bus PCI Express 2.0 x16 Thermal Solution Active 3D Vision Pro Support Via USB Warranty 3 Year Warranty PNY Part # VCQ600-PB
I contacted both HP and PNY customer support. They've not found any solution yet.
Only the suggestion I heard from HP customer support is change the graphic card w/ PCIe 3.0 support.
I believe PCI slot should be backward compatible w/ 2.0 version.
Does it really matter install PCIe2.0 graphic board on 3.0 slot?
My ohter option is AMD FirePRo V4900, which is one of the certified graphic card for the Autodesk.
However, I'm not sure wether it works with this machine.
Please give me an answer.
Kyoo

masterqueue wrote:
HP/Nvidia Quadro 600 graphics card hangs w/ blue hp startp screen after installation into HPE h8-1220t.
Error: After installation and startup, just it sounds a 'beep' and after a minute, it beeps again. No further progess w/ HP blue screen.
Notes: Card spec
nVIdia Quadro 600 by pny
Frame Buffer Memory 1 GB DDR3 Memory Interface 128-bit Memory Bandwidth 25.6 GB/s CUDA parallel processing cores 96 Max Power Consumption 40 W Energy Star Compliant Yes Physical Dimensions 2.713" H x 6.60" L Single Slot Low Profile Form Factor Yes Display Connectors DVI-I (1), DP (1) Number of Displays Supported 2 DisplayPort Yes DVI Yes VGA Yes Graphics Bus PCI Express 2.0 x16 Thermal Solution Active 3D Vision Pro Support Via USB Warranty 3 Year Warranty PNY Part # VCQ600-PB
I contacted both HP and PNY customer support. They've not found any solution yet.
Only the suggestion I heard from HP customer support is change the graphic card w/ PCIe 3.0 support.
I believe PCI slot should be backward compatible w/ 2.0 version.
Does it really matter install PCIe2.0 graphic board on 3.0 slot?
My ohter option is AMD FirePRo V4900, which is one of the certified graphic card for the Autodesk.
However, I'm not sure wether it works with this machine.
Please give me an answer.
Kyoo
Hello masterqueue.
This desktop was a CTO (Configured-to-Order) model. As such, there is a lot of information I do not know about the machine. Most importantly, how large is the power supply? According to the computer's specification page it could have anywhere from a 300 watt to a 600 watt power supply. That is a very big difference.
I'll keep an eye out for your response. Have a great day.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

HPE-400Y Soundcard ASIO compliant?

Similar Messages

Maybe you are looking for