Hpe 478d

Hi .. I am wondering if Pavilion HPE-478d supports USB 3? I recently installed a USB 3 card and when i used it, the speed is still the same is normal USB 2.

Hi,
Test and benchmark your USB 3 devices on another PC with USB 3 ports so you know the obtained performance levels.
What is the product number for your PC?
What USB 3 adapter (make and model) are you using? Did you install the USB 3 drivers that came with the adapter?
Please post the HP product number for your PC. How to Find the HP Model Number and the HP Product Number or let HP automatically find your PC model number and HP network attached printers. This will allow others to review your issue, make suggestions and review your responses. This is usually the best way to get assistance.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Similar Messages

HPE h8-1240t does not work with upgrade graphic card

Hi,
I have a HP Pavilion HPE h8-1240t, the specs:
Core i7-3770 (Ivy Bridge) (77W) 3.4 GHz
16 GB (4 x 4 GB) DDR3 PC3-10600
1 TB, 7200 rpm, SATA
So my pc came with the Radeon HD 7570 (1 GB). I just bought a GTX 750 Ti SC. I put the new graphic card on and the pc did not load, it stucks at the HP logo which blue screen. So, that issue relate to update BIOS or something? What should i do to make my new card work?
Thanks in Advance,

Bjnzzzle, welcome to the forum.
Which of these power supply units (PSU) is in your computer?
Power supply
Must select one of the following options:
300W
460W
600W
Also, what brand is the video card?
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

New video card for HP Pavillion Elite HPE-170t

Hi, I'm starting to get some screen artifacts sporadically, Ithink my video card is starting to go bad. i want to get a new one, but I am not sure what will fit. My computer HP Pavillion Elite HPE-170t:
Intel(R) Core(TM) i7-860 quad-core processor [2.8GHz, 1MB L2 + 8MB shared L3 cache]
8GB DDR3-1333MHz SDRAM
1TB 7200 rpm SATA 3Gb/s hard drive
1GB ATI Radeon HD 4850 [2 DVI, HDMI and VGA adapters]
Lightscribe SuperMulti DVD burner
15-in-1 memory card reader, 1 USB, 1394, audio
No TV Tuner
Creative Sound Blaster X-Fi Titanium
I see by some other questions here several video cards suggested, but those replies were a few years old and those video cards are no longer available.
So, any suggestions on newer video cards under $200 that will pretty much fit and work as easily as possible? Thanks!
This question was solved.
View Solution.

Thanks for the quick reply. I don't have another monitor to try, but the artifacts seem to sometimes move along with the mouse cursor. Sometimes I can scrill the artifacts away, other times the screen freezes.
I do have room for a double width card, but I was looking at the XFX R7 250E 800MHz 1GB DDR5 DP HDMI DVI Graphics Card, which seems to be a newer model of the XFX AMD Radeon HD 7750 1GB GDDR5 . Both are single wide and don't need an extra power connection.
Link:
http://www.amazon.com/XFX-DisplayPort-PCI-Express-FX775AZNP4-FX-775A-ZNP4/dp/B007Z3T5JC/ref=sr_1_1?i...
http://www.amazon.com/XFX-250E-800MHz-Graphics-R7250EZNP4/dp/B00JM5XX9O/ref=dp_ob_title_ce
What do you think of these cards?

Can I install nvidia quadro 600/ AMD FirePro V4900 (ATI FireGL) on HPE h8-1220t ?

HP/Nvidia Quadro 600 graphics card hangs w/ blue hp startp screen after installation into HPE h8-1220t.
Error: After installation and startup, just it sounds a 'beep' and after a minute, it beeps again. No further progess w/ HP blue screen.
Notes: Card spec
nVIdia Quadro 600 by pny
Frame Buffer Memory 1 GB DDR3 Memory Interface 128-bit Memory Bandwidth 25.6 GB/s CUDA parallel processing cores 96 Max Power Consumption 40 W Energy Star Compliant Yes Physical Dimensions 2.713" H x 6.60" L Single Slot Low Profile Form Factor Yes Display Connectors DVI-I (1), DP (1) Number of Displays Supported 2 DisplayPort Yes DVI Yes VGA Yes Graphics Bus PCI Express 2.0 x16 Thermal Solution Active 3D Vision Pro Support Via USB Warranty 3 Year Warranty PNY Part # VCQ600-PB
I contacted both HP and PNY customer support. They've not found any solution yet.
Only the suggestion I heard from HP customer support is change the graphic card w/ PCIe 3.0 support.
I believe PCI slot should be backward compatible w/ 2.0 version.
Does it really matter install PCIe2.0 graphic board on 3.0 slot?
My ohter option is AMD FirePRo V4900, which is one of the certified graphic card for the Autodesk.
However, I'm not sure wether it works with this machine.
Please give me an answer.
Kyoo

masterqueue wrote:
HP/Nvidia Quadro 600 graphics card hangs w/ blue hp startp screen after installation into HPE h8-1220t.
Error: After installation and startup, just it sounds a 'beep' and after a minute, it beeps again. No further progess w/ HP blue screen.
Notes: Card spec
nVIdia Quadro 600 by pny
Frame Buffer Memory 1 GB DDR3 Memory Interface 128-bit Memory Bandwidth 25.6 GB/s CUDA parallel processing cores 96 Max Power Consumption 40 W Energy Star Compliant Yes Physical Dimensions 2.713" H x 6.60" L Single Slot Low Profile Form Factor Yes Display Connectors DVI-I (1), DP (1) Number of Displays Supported 2 DisplayPort Yes DVI Yes VGA Yes Graphics Bus PCI Express 2.0 x16 Thermal Solution Active 3D Vision Pro Support Via USB Warranty 3 Year Warranty PNY Part # VCQ600-PB
I contacted both HP and PNY customer support. They've not found any solution yet.
Only the suggestion I heard from HP customer support is change the graphic card w/ PCIe 3.0 support.
I believe PCI slot should be backward compatible w/ 2.0 version.
Does it really matter install PCIe2.0 graphic board on 3.0 slot?
My ohter option is AMD FirePRo V4900, which is one of the certified graphic card for the Autodesk.
However, I'm not sure wether it works with this machine.
Please give me an answer.
Kyoo
Hello masterqueue.
This desktop was a CTO (Configured-to-Order) model. As such, there is a lot of information I do not know about the machine. Most importantly, how large is the power supply? According to the computer's specification page it could have anywhere from a 300 watt to a 600 watt power supply. That is a very big difference.
I'll keep an eye out for your response. Have a great day.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

HP Pavilion Elite HPE-480t computer and an HP bd 340i 12x blu-ray writer

I purchased HP 12x Blu-Ray writer model bd340i in the middle of last year. When I purchased my desk top from HP in December of 2010 model HP Pavilion Elite HPE-480t I installed the burner and every thing was working fine. Today I tried to burn a blu-ray disc and it came back with can not read media, that was on imgBurn. So I tried the same on the systems burner and it came back as no disc in tray. I also tried CyberLink burning software and the same thing no disc.
I then tried to play both store bought and home made blu-ray disc and it could not read the media. I was ready to blame it on a bad burner but I then tried a regular DVD both store bought and home made and it played fine. I then tried to burn a dvd single and dual-layer with all three burning softwares I have and again it was fine, no problems. Its just the blu-ray media that can not be read or writen. The only blu-ray media I used from day one has been Kodak and never had a problem. Thats what baffles me.
I at this point dont know if its a hardware or software problem with the computer or blu-ray burner or both. 3 different burning programs works fine on DVD's but not blu-ray, Plays DVD's fine but can not play or burn blu-ray discs.
Could it be the blu-ray laser crapped out and the dvd reading and writing laser is still working ? Does a blu ray burner even have to lasers for the two medias [DVD and Blu Ray]???
Everything else with the computer works fine. I even tried uninstalling and reinstalling and its the same, I tried to update the drivers and firmware on your site and still did not work. Please some help.
When did you purchase your product? : December2010
Product HP Pavilion Elite HPE-480t CTO Desktop PC
Select a problem area: other
What is your serial number (SN): [Personal Information Removed]
What is your operating system?: Microsoft Windows 7 Home Premium 64
Is your computer unable to work with accessory products? Please select all that apply. other
What type and brand of CD/DVD media do you use? Kodak Bu-Ray 25gig and HP dvd
Was the CD/DVD writer drive built into the computer when you purchased it? No
Can you hear the sound from the connected speakers?
Does the display on the product appear to be working properly? Yes
Have you connected the product to your TV, DVD player, or music system? No
If there is an error message, please specify: can not read media
Problem Description: I purchased HP 12 Blu-Ray writer model bd340i in the middle of last year. When I purchased my desk top from HP in December of 2010 model HP pavilion Elite HPE-480t I installed the burner and every thing was working fine. Today I tried to burn a blu-ray disc and it came back with can not read media, that was on imgBurn. So I tried the same on the systems burner and it came back as no disc in tray. I also tried CyberLink burning software and the same thing no disc. I then tried to play both store bought and home made blu-ray disc and it could not read the media. I was ready to blame it on a bad burner but I then tried a regular DVD both store bought and home made and it played fine. I then tried to burn a dvd single and dual-layer with all three burning softwares I have and again it was fine, no problems. Its just the blu-ray media that can not be read or writen. The only blu-ray media I used from day one has been Kodak and never had a problem. Thats what baffles me.
Please provide previous troubleshooting steps, or information that can help HP assist you.: I at this point dont know if its a hardware or software problem with the computer or blu-ray burner or both. 3 different burning programs works fine on DVD's but not blu-ray, Plays DVD's fine but can not play blu-ray.
Has anything changed since the unit functioned properly (installation of SW, settings, cabling, etc.): Everything else with the computer works fine. I even tried uninstalling and reinstalling and its the same, I tried to update the drivers and firmware on your site and still did not work. Please some help.
How would you describe your technical skill level?: Intermediate
First name Peter
Last name Cavalier
[Personal Information Removed]
This question was solved.
View Solution.

Arcticwolf, welcome to the forum.
Let's try another burner to see if that helps solve your problem. I have used CDBurnerXP for years. It has burned CD/DVD's when no other burner would work.
Please let us know if this solves your problem or not.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Can no longer connect to the internet on my hp pavilion hpe h8-1360t cto desktop.

I recently purchased and setup an HP Pavilion HPE h8-1360t CTO desktop computer with Windows 7.
I have a broadband connection and am able to connect to my wireless network and internet with other computers.
About 3 days ago I loaded Blue Coat K9 web protection and have not been able to connect to the internet since.
I removed K9 and rebooted, but I still can't connect.
I moved the ethernet cable to my old computer, which has K9 on it and I connect to the internet just fine.
Thanks in advance for your help.

Hi
Please find the link given below might help you to resolve your issue.
Resolving Broadband Internet Connection Problems
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

HP Pavilion HPE h8-1230 -- List of compatible graphics cards???

HP Pavilion HPE h8-1230
Windows 7
Service Pack 1
model: h8 1234
Processor: AMD FX 6120-six core Processor 350 GHz
Memory: 10 GB (7.73 Usable)
System type: 64bit
Current Graphics card: Nvidia GeForce GT 610
MotherBoard Description:
Manufacturer's name: Gigabyte
Motherboard name: M3970AM-HP
HP/Compaq name: Angelica2
Power supply: EVGA 500W 80PLUS Certified ATX12V/EPS12V Power Supply 100-W1-0500-KR
Bios version: AMI v8.10 12/3/2012 (the most recent bios version available through HP support)
Link to MotherBoard info: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03353629&tmp_task=prodinfoCategory&cc=us&dlc=en...
I am trying to upgrade my graphics card. I recently purchased a Zotac GeForce GTX 760 AMP Edition 2GB GDDR5 PCI Express 3.0 DVI HDMI DisplayPort SLI Ready Graphics ... . I also installed the above mentioned power supply. I installed both and when I went to start the computer, I got the HP logo blue screen with a message saying to press ESC key for start up menu, however the keyboard was unresponsive. I updated the bios to this using this link http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=cp-114777-1&cc=us&dlc=en&lc=en...
The hp logo screen changed but that was about it. Using the new card, I could get to the first boot screen, and to the hp logo, but then it would stay stuck on the hp logo. Also if I tried to press f10, ctrl + f or any key, I would just get a black screen and nothing would happen. I've read that this seems to be a common problem with the HPE models and the 700 series cards and have seen no solution. I have already arranged to return the card figuring it's either defective or not compatible with my system.
So after all that, I've tried for the last hour to get a list of compatible graphics cards to upgrade my system, and have not found such a list. I've found lists in the forums for other similar models, but I want to be absolutly sure before I make another purchase and have to go through all this trouble.
Any help would be appreciated and if more info is needed don't hesitate to let me know.

Hi,
There are graphics card solutions posted on this forum. They may be hard ro find but they are psoted. It's good that you checked the BIOS settings in the posted HP links as sometimes they get changed thinking that this will work better. However, in the case for Windows 7 it's just the opposite.
You issue is not a driver problem. Check with the graphics card manufacturer for a remedy. If that particular card is video BIOS enabled for UEFI then you are stuck. You can either return the card or install Windows 8 in UEFI mode.
Another choice would be to try one of the below video cards that run in legacy or UEFI mode.
MSI NVIDIA GTX N750 TI and the MSI GTX N750 TF
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Unable to use Recovery Manager on HP Pavilion Elite HPE-112y PC Windows 7

HP Pavilion Elite HPE-112y PC.
Genuine Windows 7 Home Premium - 64-bit.
I'm having problems with my Recovery Manager. A few days ago it was working fine. The other day when I tried to access either the "Software Program Reinstallation" or the "Hardware Driver Reinstallation" to check something out, both my DVD and BD drives opened and a message popped up saying:
This system does not have a recovery partition. The recovery process needs to use the set of recovery discs you created previously. Please insert disc #1 now.
I did not create any such recovery discs. I don't know how this happened. When I looked at the "I'd like to take precautions" section of the Recovery Manager, the "Recovery Disc Creation" and the "Remove Recovery Partition" are grayed out, but the "View Recovery Report" is still active and there is some kind of report in it. I don't know what the report means.
I did ask for advice somewhere else and was asked to post a screenshot of my Disk Management from the Computer Management. After seeing the screenshot, I was told that my recovery partition is there and in good health and there is a possibility that something is preventing the recovery process from seeing it.
I'm asking around for advice before I try anything. I want to be very cautious before I do anything drastic.
Is there a chance that I can find my Recovery Partition and restore it? Or will I have to do a full System Recovery to get it restored?
===============
I'm not trying to make any changes yet, but I thought I would take a look at the System Recovery in the Recovery Manager. When I click the System Recovery button this is what I see.
Restore your computer to its original factory condition.
Your computer does not have a Recovery partition.
If you want to continue the restoration process, make sure you have inserted disc #1 and then click "Yes" to continue, or click "No" to exit.
Is this going to be a problem if I need to restore my system?

Hi,
Even though the Recovery Manager software is unable to launch a system recovery, the f11 option may still work as it uses an entry in the BCD ( boot configuration data ) to launch via the f11 method at start-up. Saying that, I would definitely recommend getting a set of Recovery discs in case it does launch correctly, just to be on the safe side.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How can I add USB 3.0 to my HP Pavilion Elite HPE-190t CTO Desktop PC?

How can I add USB 3.0 to my HP Pavilion Elite HPE-190t CTO Desktop PC? It uses Windows 7 Pro 64-bit OS.
I can't tell how many or if there are expansion slots inside the case. Is there a reliable source for such an expansion card?

Considering the different options that PC could have been ordered with, it might be there is not an empty slot to mount a PCI add-on card to add a USB 3.0 card. It would be advisable to open the case to see if there is an empty slot. If there is, then THIS is a choice to add USB 3.0
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

I want to upgrade my video card in my HPE H8-1020 - It is a Eyefinity Radeon HD6570

I want to upgrade my video card in my HPE H8-1020 - It is a Eyefinity Radeon HD6570. I want to upgrade to a professional monitor for photo editing and would like to know what is available?

Jimg-evv, welcome to the forum.
What is the make/model of the monitor that you want to buy. I will provide the information for you, but it would help me to know more about the monitor.
You can upgrade the video card. However, most mid-level cards require at least 400W to operate properly. The power supply unit (PSU) in the computer is 300W. A card that would work for your needs would require a PSU upgrade, as well.
I recommend at least 500W; 600W would be even better because it would allow for future upgrades. I like OCZ and Corsair PSU's.
You would need a PCI Express x16 video card. I like XFX, EVGA, Sapphire and PNY in that order. If you upgrade the PSU, this card should work for you.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Cannot install windows 7 service pack 1 on my HPE-400z desktop

I have an HP hpe-400z desktop pc. It is running windows 7 home premium operating system. Ever since Windows 7 SP1 came out, my pc has been trying to install it. Every time it tries to install, during the boot process the install fails and the system reverts back to original settings. I get the error message E_FAIL (0x80004005). I have tried letting the automatic updater install this sp1 and I have also downloaded it, running the update, and then the same thing happens. I have tried it without my security software running and get the same result. This has been going on for so long now that I do not even bother to watch my machine boot up,- I know it is going to boot twice due to the failure of installing sp1. Please help!

I would suggest you download the Win 7 Readiness Tool (see list of OS versions) located here
The System Update Readiness Tool can help fix problems that might prevent Windows updates and service packs from installing. For example, an update might not install if a damaged system file prevents the update from recognizing the version of Windows that's running on your computer.
If your computer is having problems installing an update or a service pack, download and install the tool, which runs automatically. Then, try installing the update or service pack again.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Maximum hard drive size for HP HPE-180t

Is there a way to have the entire space of a 4TB SATA III (6Gb/s) drive show up in Windows 7 x64 running on an HPE 180t? I installed one such hard drive on my HPE-180t, and the BIOS only saw 2TB of space, and the drive did not show up in Windows. HP Diagnostics tools (run before Windows starts) reported the following error "communication with device failed".   The motherboard and bios info is shown below. SATA mode is set to RAID.   The hard drive itself passes all the SMART tests in BIOS and seems to function fine.
There are two separate problems.   The communication error above, which needs to be solved first, and the "only 2TB showing in BIOS" problem.   Can the 2TB problem be addressed with another BIOS on this motherboard or some BIOS setting on the existing BIOS? If so, what is the BIOS and/or settings?
I looked through HP online support today (including google searches on the HP support forums) and did not see the answer to these questions/problems.
System Board
   Manufacturer PEGATRON CORPORATION
   Product TRUCKEE
   Chipset Intel X58
   Southbridge Intel ICH10R
BIOS
   Vendor American Megatrends Inc.
   Release Date 09/17/2010
   BIOS Version String 5.29
   ROM Size 1.00 MB

Hi,
You may want to read this and format HDD before the installation:
   http://msdn.microsoft.com/en-us/windows/hardware/gg463525.aspx
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HPE-400f running but no picture or beep/manuf defect mother-board/should'nt HP fix it?

This is the letter i just sent to the HP CEO.
PLEASE HELP!
I have been trying to get to the bottom of my HPE-400f problem for months now, and now I found an article disclosed by HP, that my model is included in the models that have a MANUFACTURER's DEFECT!
I believe it stated that the ongoing defect was with the mother-board.
I am hoping you will help me, because I am trying to avoid having to call India, and be put on hold for 1 hr., like the person that give me the link for the recall did.
I purchased my PC on 01/12/11, with the 2yr. extended $120.00 warranty,
Hp states they are adding 1 yr to that, but that still puts me out of warranty for like 7 mths now.
Why was I not notified by mail, that my investment in an almost $900.00 HP PC, had a DEFECT?
I hope that you will help me by doing the right thing, and taking care of this problem for me?
If you will, I will continue to be a loyal HP customer, as I have been since the 90"s.
If I have to pay, to fix HP's screw-up, I will NEVER have another HP product no where near me!
This Manfactured Defect, is the same thing to me, as an automobile recall.
I have to take my Toyota Prius in now for a problem, which has been recalled!
Of course , there will be NO-CHARGE at all, for this was their screw-up!
Please put yourself in my position, have some compassion/sympathy, and treat me the way you would want to be treated.
Please respond as soon as you can. I have been w/o this PC for some time now.
I have already purchased a video card replacement, due to its fan not working, and a power supply, because I thought maybe that was my problem, until I found HP's recall on the motherboard.
Here is the link to the RECALL information, that was NOT sent out to their customers!>>>>>>>http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03199423
Thank you for your time, and hopefully for your help!
Christopher Scott
If anyone else has been though this problem, PLEASE let me know!
Thanks!
Please feel free to email me directly.
[edited personal information by Moderator]

Hi @scottsphoto ,
I have sent you a private message. If you are not sure how to check your private messages then this post has instructions that will guide you through the process.
Regards,
George
I work for HP

Video cards with 2 dvi output ports compatiable with hpe h8-1234

I need a video card that will support 2 dvi monitors and be compatiable with a hpe h8-1234 desktop. Please help

Hi,
The current video card in your PC will support two DVI monitors. Just use a HDMI to DVI cable with one of the monitors. Your video connection possibilities are: one analog DVI monitor and one digital monitor or two DVI digital monitors. For best results use two digital monitors.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Hpe 400 f freezes

I have an HPE 400f desktop. I am running Windows 7. My screen freezes a lot. The PC does not respond to the keyboard or mouse. I do get an error message that display driver AMD is not responding. Sometimes it responds on it's own, and some times nothing....and i have to hard reboot the PC. Any suggestions?

Since the issue is specific to your original user account, you can proceed in two ways. One is to log into your new account, make a list of the preference files (plists) located in /username/Library/Preferences/, including any in the ByHost subfolder, log back into the original account, move everything on that other account's list from the original account's Preferences folder into a newly created folder on the Desktop, log out and back in, and see if the problem goes away. If so, you can copy the ones in the Desktop folder (one at time) back into /Preferences/, restart, and see if the problem returns. If so, you've identified the corrupt/conflicting one. Continue with all of them until isolating the bad ones. That'll save you the trouble of resetting preferences.
The second way is much more detailed and I'll not burden you with the steps unless the above doesn't fix the issue.

Hpe 478d

Similar Messages

Maybe you are looking for