HPE 490t refresh

My HPE 490t has 2 x 1.5 GB system disks, in RAID 1 configuration
managed by Intel Rapid Storage Technology.
The computing power of this machine is more than
adequate for my needs but the disk space & performance
aren't. I have also had a few incidents that suggest
it might be time to think about replacing those spinning
disks - they've been running continuously for nearly 4
years.
I was planning on moving Windows to an SSD, & swapping
the disks. Any caveats? What about using 2x 4 TB drives
as replacement disks instead of 1.5 TB? Will the Intel
product mirror 4 TB drives? It warns against using volumes
greater than 2 TB as "system" drives, but doesn't seem to
explain what "system" means - I think the 2 TB limitation
is for the partition Windows boots & runs on & is inherent
in Windows 7, but there's a good chance I don't have that
right. Any advice/experience appreciated.
This question was solved.
View Solution.

Cecinit, welcome to the forum.
If you ever use a SSD you will never go back to a disk drive. As you can see in my signature, I installed a Samsung 840 EVO 500 GB, SSD, in my HP computer. I had to use an adapter to install the 2.5" SSD in a 3.5" drive bay. It was an easy task using Samsung's Data Migration software. I left the hard drive installed as it was when I bought the computer. Then, connected the SSD to a spare SATA port in the computer and cloned the HDD onto the SSD. Using Samsung's software made it easy, as I said. Once the HDD was cloned, I disconnected the HDD and booted to the SSD. It worked the first time.
As for replacing the HDD's, the maximum hard drive supported by Win 7 is 2 TB for the boot drive. Here is what you have to do to use a 4 TB hard drive with Win 7: In order to use a drive larger than 2 TB, you will need an operating system that can partition and format that drive. Windows 7, Vista, Windows XP (64-bit), Mac OSX 10.4.x (Tiger), Mac OSX 10.5.x (Leopard), Mac OSX 10.6.x (Snow Leopard), and Mac OSX 10.7.x (Lion) all have this capability through the GUID Partitioning Table (GPT). The GUID partitioning scheme has the ability to partition both internal and external drives far beyond 2 TB's in size.
Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Similar Messages

HPE 490t Desktop

I have a HPE 490t desktop that i would like to upgrade Graphics card and memory. i am pretty sure of needed memory but cannot find a Graphics card that i am sure will work and will be the best/fastest one possible for my unit.
I can use any possible help as i am one who normally just turns on and not good at these things.
I did read it is a i7processor with motherboard model: 2A86. It is probably about 4 years old.
Thanks,
This question was solved.
View Solution.

Hi,
The BIOS level of your four (4) year old PC is going to limit your graphics card choices along with the 460 watt power supply. The specifications for your PC are listed here and several graphics cards are listed. The NVIDIA 460 is probably your best choice.
Review this posted article. Open up your PC and do some measuring. Do you have room for a double wide card?
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

HPE-490t Graphics Card Upgrade

Hello! I currently have an HPE-490t that was built in December of 2011. Here are the specs:
-Intel(R)Core(TM)i7-980X six-core Extreme Edition [3.33 GHz, 1.5MB L2 + 12MB L3 shared cache]
-Motherboard is a Pegatron, PN: 612503-002
-16GB DDR3 - 1066MHz SDRAM [4 DIMMs]
-NVIDIA GeForce GTX 460 1GB
-460W PSU
I'm looking to upgrade the graphics card. The GTX 460 is a PCI-e 2.0 x16. I'm looking to upgrade to a GTX 660ti or 660. The PSU would be able to handle the power draw and I believe the card would fit the board but would this motherboard support the GTX 600 series' PCIe 3.0?

Woogz412 wrote:
Hello! I currently have an HPE-490t that was built in December of 2011. Here are the specs:
-Intel(R)Core(TM)i7-980X six-core Extreme Edition [3.33 GHz, 1.5MB L2 + 12MB L3 shared cache]
-Motherboard is a Pegatron, PN: 612503-002
-16GB DDR3 - 1066MHz SDRAM [4 DIMMs]
-NVIDIA GeForce GTX 460 1GB
-460W PSU
I'm looking to upgrade the graphics card. The GTX 460 is a PCI-e 2.0 x16. I'm looking to upgrade to a GTX 660ti or 660. The PSU would be able to handle the power draw and I believe the card would fit the board but would this motherboard support the GTX 600 series' PCIe 3.0?
Hi,
I think so.
http://www.tomshardware.co.uk/forum/367155-33-will-pcie
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

I have a hp pavilion elite series hpe-490t desktop pc, would 2 560ti in sli work if i get a new psu

Expansion Slots 2 PCIe (x16 graphics), 1 PCIe (x4), 1 PCIe (x1)
MOTHERBOARD
Manufacturer: Pegatron IPMTB-TK
HP: Truckee-UL8E
Intel X58 Express
Will this accept SLi OR CROSSFIRE ?
THANKS

Hi jackie,
I have the same motherboard in my HP e9280t. I have never seen HP post SLI or Crossfire support for any of the main line PCs.
SLI or Crossfire may not improve the performance of your application. Even a dedicated NVIDIA Physx card may or may not help. You might want to do some research.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Can not refresh view data in STRUST

I am using the JSP (STRUTS) for developing my App.
I get a list of contact. In bellow it, I make a link for each contacts.
When i view details of one contact. On click link below.
My pages:
listcontact.jsp
contactdetails.jsp
When i request a details of contact from list contact -> View successfull.
But when i refresh the contactdetails.jsp page. I got a message error:
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
note The full stack trace of the root cause is available in the Apache Tomcat/5.5.7 logs.
I have to use:
response.setHeader("Cache-Control","no-store");
response.setHeader("Pragma","no-cache");
But can't refresh any way this page.
Plase show me the way to solve it.
Thanks
Vu Nguyen

hi,
Here are codes
listdata = new CompanyListData();
companyList = (ArrayList) session.getAttribute("datalist_company");
if (companyList == null)
companyList = (ArrayList) listdata.getCompanyList(datasource);
session.setAttribute("total", companyList.size()+ " companies");
session.setAttribute("datalist_company", companyList);
return (mapping.findForward("success"));
And for details:
if ((addressItem==null && companyName!=null)||(addressItem==null&& companyId!="0"))
addressData = new AddressDetailData();
addressItem = addressData.getAddressItem(datasource, companyId);
session.setAttribute("addressDetail", addressItem);
I got companyID by:
String companyId = request.getParameter("companyId");
return (mapping.findForward("success"));
Please gest the problems that.
Thanks,

Same EPM Excel Report takes time to open and refresh on 1 system while it opens and refreshes faster on other system

Hi All ,
I am facing an issue where the EPM Excel Templates on SERVER ROOT FOLDER take time to open on 1 system . It also takes great amount of time to REFRESH . While on an another system the same Report opens rather quickly and refreshes also quickly .
Regards,
SHUBHAM

Hi Shubham,
Now day excel problems are due to some MS update. Not sure but have a look at below note.
2107965 - Issues in EPM Add-in after installing Microsoft updates

Refreshing the Data from a embed view in a view container

Hi everybody
I would like to know how can I do to refresh all data from a View with a view container the problem is:
that I have a window that has a view at the same time this has a view container. The Main view brings the data of editable elements when I select one element of the main view the view container brings a list for that element (dependencies) but only the first time a choose an element loads the correct data, when I choose another one it brings the same old data and doesn't make the call for the wdDoInit() method.
The question is:
How do I force the view to refresh all the data or call again the wdDoInit() method?
Thank you for your help

Aida,
Lets say you have two components C1 and C2 and you want method from C1 to be available in C2 then follow these steps:-
1) Goto the Interface Controller of C1 and create a method there lets say doSomething
2) Then goto C2. There you can see Used Web Dynpro Components --> Right click Add Used Component --> Give some name say C1Comp --> Click browse and select C1 --> Click Finish.
3) Next goto Component Controller of C2 --> Properties --> Click Add and check if C1 is added. If not then select the checkbox and select OK.
4) Now goto Implementation tab of C2 and lets say wdDoInit you can write following code:-
wdThis.wdGetC1CompInterface().doSomething();
Chintan

Not able to refresh the data in a table

Hi In my application i fill data in a table on clikc of a button ..
Following are the line of code i have user
RichColumn richcol = (RichColumn)userTableData.getChildren().get(0); (fetch the first column of my table)
richcol.getChildren().add(reportedByLabel); (reportedByLabel is a object of RichInputText)
AdfFacesContext adfContext1 = AdfFacesContext.getCurrentInstance();
adfContext1.addPartialTarget(richcol);
adfContext1.addPartialTarget(userTableData);
But on submit of that button table data is not refreshed after adding partial trigger on that table as well as that column also .... any idea??
Edited by: Shubhangi m on Jan 27, 2011 3:50 AM

Hi,
The Code that you have shown adds an additional inputText component to the first column of a table.
Is that your intention?
If yes, please use the following code snippet to achieve your functionality:
JSPX Code:
<af:form id="f1">
<af:commandButton text="Add Column" id="cb1"
actionListener="#{EmployeesTableBean.onAddColumn}"/>
<af:table value="#{bindings.Employees.collectionModel}" var="row"
rows="#{bindings.Employees.rangeSize}"
emptyText="#{bindings.Employees.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.Employees.rangeSize}"
rowBandingInterval="0"
selectedRowKeys="#{bindings.Employees.collectionModel.selectedRow}"
selectionListener="#{bindings.Employees.collectionModel.makeCurrent}"
rowSelection="single" id="t1"
binding="#{EmployeesTableBean.table}">
<af:column sortProperty="EmployeeId" sortable="false"
headerText="#{bindings.Employees.hints.EmployeeId.label}"
id="c1">
<af:outputText value="#{row.EmployeeId}" id="ot2">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.Employees.hints.EmployeeId.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="FirstName" sortable="false"
headerText="#{bindings.Employees.hints.FirstName.label}"
id="c2">
<af:outputText value="#{row.FirstName}" id="ot1"/>
</af:column>
<af:column sortProperty="LastName" sortable="false"
headerText="#{bindings.Employees.hints.LastName.label}"
id="c3">
<af:outputText value="#{row.LastName}" id="ot3"/>
</af:column>
</af:table>
</af:form>
Bean:
public class EmployeesTableBean {
private RichTable table;
public EmployeesTableBean() {
public void setTable(RichTable table) {
this.table = table;
public RichTable getTable() {
return table;
public void onAddColumn(ActionEvent actionEvent) {
RichInputText newRichInputText = new RichInputText();
newRichInputText.setId("new");
newRichInputText.setValue("Name:");
RichColumn richcol = (RichColumn)table.getChildren().get(0);
richcol.getChildren().add(newRichInputText);
AdfFacesContext adfContext1 = AdfFacesContext.getCurrentInstance();
adfContext1.addPartialTarget(table);
Thanks,
Navaneeth

Not having to refresh the data in the main report but only in the subreport

Hi SAP,
I have a report that uses a stored procedure in the main report and uses regular database tables in the subreport. The data returned from the stored procedure reports information from the month-end database (a cutoff point from the previous month's numbers) while the subreport reports information from the live database. This report gets run everyday to show the changes in numbers from the live database. Obviously the numbers from the month-end database remainds static until the next month's cutoff database is created.
My problem is that everyday when I run the report, the data needs to refresh from both the stored procedure in the main report and the live database tables in the subreport. How can I leave the data returned from the stored procedure static or as is without refreshing the stored procedure returned data and just have the subreport data refresh itself? The stored procedure really puts a strain on the database and I would like to cut-out the time to process the report as well. Does anyone have any ideas?
Zack

Hi Zack,
Try the following under Report options.
1. Clear the check box of "Verify Stored Procedures on First Refresh" in the Main report.
2. Select the check box of "Verify on First Refresh" in the sub report.
Hope this helps.

Can not refresh ValueObject after altering database table

Hello All,
In FB4, in order to refresh a service, I used to
- select a service operation
- select configure return type
- select auto-detect
- hit next and on the follow page select the existing ValueObject
...it would update.
As far as I can see, this does not work in FB4.5. Instead, after selecting auto-detect and clicking next:
There was an error while invoking the operation. Check your operation inputs or server code and try invoking the operation again.
Reason: Warning: mysqli_stmt_bind_result(): Number of bind variables doesn't match number of fields in prepared statement in...
Is there a way to refresh a ValueObject. Clicking refresh is a no go.
Thanks for your help!
J

hey jay. did you ever figure out how to update your valueObject? I just posted a similar discussion "changing php-service in FD breaks AS3 service class and valueObjects" here: http://forums.adobe.com/thread/882288
maybe we'll get a reply....

Can not refresh contents of finder windows

I can not get my finder windows to refresh their contents. My picture folder is the one that really bothers me. When I am trying to upload pictures to the internet, the picture folder is never accurate. I have tried the refresh finder apple script, restarting the computer, opening and closing the window, nothing seems to work.
The content is there, when I search for a specific picture file it is there, but it is not located in the right subfolder. I download and manage my pictures on kodak easyshare.

Hi there,
The content is there, when I search for a specific picture file it is there, but it is not located in the right subfolder.
Hmmm, are you saying something is moving them? Or the Finder isn't opening them to the right folder?
Have you tried this one...
http://www.versiontracker.com/dyn/moreinfo/macosx/10958253
Safe Boot, (holding Shift key down at bootup), & use Disk Utility from there to Repair Permissions, reboot once more.
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions...
Move this file to the desktop...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
reboot when it completes.

Can not refresh server manager Error:0x8007045b

OS: Windows 2012 R2 Core
Services: Hyper V
I was trying to remote reboot and the session hung. No worries I decided I could just reboot the next morning. So I rebooted the next day but when I go into server manager I get
an errror can not refresh server manager Error:0x8007045b. Did some research found suggestions to fix it using a DISM.exe /Online /Cleanup-image /Restorehealth.
But then I get an error 1115 A system Shutdown is in progress. I attempt to fix this issue using pskill winlogon but the issue pursistest. I have restarted the server several times now. Not sure how to fix this.
Thanks in advance,
Jake

Hi,
In addition to the above information,
Checkout the below thread for similar discussion,
http://social.technet.microsoft.com/forums/windowsserver/en-US/a700e9f6-4491-4c70-8bd0-d9d3111e2f70/windows-reboot-error
Regards,
Gopi
JiJi
Technologies

Can not refresh page after save properly(When not saving master record)

I am using jdeveloper 11g R2 (11.1.2.3) JSF Facelet
In some use case I have Address as master table and Person as detail table
For some business reason I need to don't save same addresses
eg:
If +1 Test St+ is in database already and new user coming and adding this address with new person
I need to use the row in database not creating a new address
I do saving in doDML method of Address with some hashing algorithm and it is fine
My problem is that I can not refresh page after save properly
User coming to page think Adding a new address and a new person but in fact no new
address added because of business I describe above
Any ideas how I can implement this?
Appreciate that
Regards
Mohsen

Hi,
from your description it is not clear why the page doesn't refresh. It could be a problem in your implementation code - who knows. What if you perform the address check on a command button that actually submits the new address? If the check returns true (address exists) you would call row.refresh(forget new row); and re-query the view object so the address coming from the database is displayed. If you wanted to use the doDML then yuou need to be aware that doDML doesn't help removing the row the user created. It just ignores the database update but the entity is still around, which in my suggested solution wont be the case.
Frank

Refresh/Update data in a materialized view

Hi,
I have question about the data in a materialized view and how it is refreshed. My mat view has all my dimension-ids and my (for my specialize needs) aggregated measures from my fact table. I used the mat view wizard to create my view - which works perfectly. But now I wonder if I have to create some sort of mapping(?) or some sort of trigger to refresh the data in the mat view. Or is the data automatically refreshed when I start my fact table mappings. I use OWB 11gR2
thx

MVs have properties for refresh - you an refresh based on schedules or when dependent data is committed or manually.
Cheers
David

Can not refresh snapshot changes after importing data of master site

Hello !
I have two database computer,one as master site,one as snapshot site.Because the error of the hard disk of master computer,I use the exporting data file to recover my database.after importing ,I found I can't refresh the refreshgroup on snapshot,who can tell me why?
thinks in advance!
(exp system/manager full=y inctype=complete file='/home/save/backdata/xhsdcomp.dat')
(imp system/manager inctype=system full=Y file='/home/save/backdata/xhsdcomp.dat'
imp system/manager inctype=restore full=Y file='/home/save/backdata/xhsdcomp.dat')
null

You haven't listed the errors that you're receiving when attempting to refresh your refresh group, but if your snapshots are attempting to fast refresh, I suspect it's because the creation timestamp of the snapshot log on the master site is newer than the creation timestamp of the snapshot. In this case you will need to do a complete refresh of the snapshot (or drop and recreate the snapshot) before you will be able to fash refresh it again.
If this is not the case, please post the errors you are receiving when you attempt to refresh the refresh group.
HTH,
-- Anita
Oracle Support Services
null

HPE 490t refresh

Similar Messages

Maybe you are looking for