HPE-552SC and ASUS GTX750TI - wont get past BIOS
Hi. My graphiccard delivered with the HPE-552SC has failed and I bought a new ASUS GForce GTX 750TI. After installing it the computer wont go past BIOS. Looking at some posts in support forums, some solutions could be to turn off UEFI - how ever when I press "ESC" on BIOS startup I cant run the application "Run UEFI Application" - see picture below. BIOS is updated to 7.15. What to do? Best regards,Andree
andrewmorgan98,The OP had a GTX460 160W (that is what comes in that model unit). The GTX460 is superior to a GTX750ti card in all performance marks. That is why the GTX660 140W - 660Ti 150 was suggested. Those two cards have better performance marks that the OP's original GTX 460, and are within the wattage of the original PSU. Why would the OP want to step down in performance?BTW, the GTX460 required two 6pin PCIE, so the OP has the required Watts and required PCIE plugs. The 660 needs 1, the 660Ti needs 2.
Similar Messages
-
Im trying to register my Itunes acc, when it asks for billing information i select clickandbuy, its already authorized, but it just stays there on the itunes page until it expires.
Launch iTunes. From the menu bar click iTunes / Preferences then select the Advanced tab.
Click: Reset warnings and Reset cache.
Click OK.
If that doesn't help try resetting your Apple ID password >
Apple - My Apple ID -
My macbook pro wont get past the grey screen at startup. Help!!
After doing a run of the mill software update on my macbook pro (running snow leopard) it froze during the "moving items into place" stage. I forced a shut down and now it wont get past the grey screen with apple logo and spinning wheel. I have tried booting from the original DVD but it still freezes. When I boot it in verbose mode it seems to stop at "jnl: unknown-dev: update_fs_block: error reading fs block # 3597880! (ret 5)", the Apple AHCD Disk Queue manager :: set power state is timing out and there is a disk I/O error. I have tried to reset the power manager (not sure if it worked or not) and I have also tried clearing the PRAM (again, not sure of that worked). When I try to look at the hard drive using target mode on my imac the hard drive doesn't come up but the DVD does. I'm concerned that my hard drive is fried. Any suggestions?
It would help to state in your post which remedies you tried that didn't work.
Start here > OS X Lion: If you see a gray screen at startup
If nothing there helped, try Starting up in Safe Mode
Safe Mode deletes some system caches that may help.
A Safe Mode boot takes longer than a normal boot so be patient. Once you are in Safe Mode, click Restart from the Apple menu.
If a Safe Mode boot didn't work, since your Mac has OS X v10.7 installed, restart your Mac while holding down the Command + R keys so you can access OS X Recovery built in utilities. The startup disk may need repairing.
Tip: Hold down the Eject key while starting up your Mac to eject a disc. -
I did a full system restore to my phone along with the new 7.0 update. Now I went to restore my phone setting back through Itunes and it goes through all the steps but when it is completed it wont get past the "Connect to Itunes" screen
So what happens when you connect to iTunes?
-
my ipod touch 4g 8 gigs is not turning on it wont get past the apple logo its not frozen because it turns the screen black and the apple logo please help me
- Try a reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then connect to your computer and try to restore.
- See if placing the iPod in recovery mode will allow a restore. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- If the logo still show all the time, let the battery fully drain. After charging for an hour try the above again. -
hey guys. my macbook air wont get past the screen with the apple on it during start up. how do i fix this? i have a paper saved on my laptop on need to get at it. thanks guy!
Your boot drive is damaged in some way. If you have an original installation disc, you can boot from that and run Disk Utility. From DU you can select your internal hard drive ("Macintosh HD" is the name Apple puts on it - you may have renamed yours) and select "Verify Disk". If errors come up, try "Repair Disk". If it repairs, then you should be able to restart and boot from it. If it doesn't show up or won't repair, your drive is probably hosed.
Clinton -
My macbook wont get past the gray startup page !!
my macbook air wont get past the gray startup page!!
i read about it and i think its because of the HD low space !
so what should i do ?
i tryed to repaire it and it didnt work !!With an external drive, after it has been setup, partitioned, etc., go to System Preferences and Time Machine, or if TM is showing on your dock, just click on it, and turn time machine on...you can then give it the name of the partition on the external drive where you want to backup. TM will do that in the background and you don't have to think about it.
I have the Mercury Elite Pro drive from OWC, 2 TB, that I partitioned into a backup partition and working partition...so TM backs up regularly and I can use the other partition for either another bootable Mac OS X space or just point applications to that space for file storage.
You can clone the operating system using Carbon Copy Cloner or SuperDuper which are both free downloads. They make a bootable copy of the operating system for you. -
Old Ipod classic 160 gb wont get past battery charge screen has been sitting for months
I have an old Ipod classic 160gb,that has been sitting for a long time so im sure the battery has no life in it at all,im charging it via usb cable and it wont get past the battery charge screen,how long would a completely dead battery take to move off the charge please wait screen untill you know its a deeper issue at hand if so how would you get it to start up pass the charging please wait screen?to see the true issue?
Thanks for your help
IceTry to do a reset and see whether it can be solved
http://support.apple.com/kb/HT1320?viewlocale=en_US&locale=en_US -
When I got my Ipod Touch 3 years ago, my mum set up an Apple ID in her name & email address. I have since got an Ipad & set up my own Apple ID. How can I update my Ipod to my Apple ID? I would like to sync the Ipad and Ipod, but cant get past this ID problem?
Hi AnnieAnneok,
Welcome to the Support Communities!
The articles below may be able to help you with this.
Click on the links to see more details and screenshots.
First, I would suggest you backup your iPod touch and transfer purchases to your computer:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Confirm your Apple ID is set up and updated with the correct information:
Frequently asked questions about Apple ID
http://support.apple.com/kb/HT5622
Then, in Settings on your iPod touch, sign out of your iCloud Account and your iTunes Store account and sign back in with the correct Apple ID.
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
Cheers,
Judy -
My niece dropped my iphone and now i cant get past my password screen because its unresponsive in a certain area, what do i do?
hand it in for repair?
-
I have setup my mail but now it always opens to welcome to Mail page and I can't get past it.
I have set Mail and it worked fine before I upgraded to OS 5. Now it always opens to Welcome to Mail page and I can't get past it. I tried just setting up the account again but it gives me the message that it already exists. I can see 50 emails in the Mail icon. How do I get past Welcome?
Try a reset: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)
-
My old iMac and OS 10.4 will not accept the New iTunes Version 10 application and I can't get past the screen offering to download iTunes 10. This is wrong and I need help getting past this situation. Help!
Sure, you can get around it if you don't need the newest version of iTunes. I still use version 7.5 because the newer versions didn't strike me as offering anything I needed.
If you do need a version 10-something then you will have to upgrade your operating system to Leopard (fi your computer will support it) at least. If you need 10.5 for some reason then there's no getting around it, you will have to buy a new computer. -
help! my first mac! and I can't get past the Welcome menu window... I try to select "united states" and want to continue but nothing happens. Any idea why?
Restart the Mac, and start over, it very well could be frozen. This is not the way you would like to start out your Mac experience!
-
I'm trying to process my first iPhoto order and I can't get past the fact it won't accept my telephone number. Thinking this may be a format glitch, I have tried to get around this by spacing but no success. I live in Australia and the prefix is +61. Any suggestions welcome? Yours in frustration:( CW
Experiment - or search these forums - someone discovered a solution and it was a format issue
The US format for phone numbers is 10 digits AAA-PPP-NNNN - you do not include the 01+ here typically - maybe if you can out your digites in that format it will work
Hopefully someone from down under will tell how they do it
LN -
iMac froze while surfing web last night (color pinwheel), I forced quit and now when rebooting the fan and chime come on, the monitor stays on grey and the apple sign is replaced by a stop sign and I can't get past this, is there self fix? Never backed up.
The computer (top / back of monitor) gets really hot within minutes.How old is the iMac?
With no backup, you have probably lost all your data.
Sounds like serious hardware problem for which you are going to have to take it to Apple for an estimate of repairs.
Allan
Maybe you are looking for
-
Can multiple APEX application use the same parsing schema?
Hi, I have 4.2 APEX thru pl/sql Gatewat, 11gr2 DB and using theme 24. Due to the APEX limitation for version control I would be splitting 1 big ERP applications into 24 different APEX applications and each application would be considered as 1 unit fo
-
IPod Touch 4th gen won't connect to wi-fi
So I was in my university, when I noticed the iPod suddenly disconected from Wi-Fi. When I got home, it didn't connect to the home network either, and asked for the network password. I entered it, and said it was wrong. I entered it from my iMac,
-
Unrejecting clips in iMovie 11
I rejected certain clips in iMovie. I then saw an orange line through them so I knew they were in a project. How do I "unreject" them so they no longer show up in the rejected screen canvas. I am using iMovie '11 and a MacBook Pro.
-
Say I have a PL/SQL package: -- Then inside that PL/SQL package I have two value defined. PACKAGE test$package BODY IS P_WO_ID NUMBER :=5; P_SOL_ID NUMBER :=7; -- A Function out somewhere in other module who does return me a value -- based on paramet
-
Missing Audio from FCP to Soundtrack Pro in Final Cut Studio 2
I've been trying to edit a sequence from Final Cut Pro 6 in Soundtrack 2 by sending the sequence to soundtrack as a multitrack project. For some reason, when I send it, multiple audio files from the original sequence are completely missing, and I hav