HPE 570t fails to boot, stuck on splash screen after bios update drom 7.11 to 7.15

Hey guys,
I have a desktop pc by HP. HP Elite 570T.
After upgrading the bios from 7.11 to 7.15 due to noticeable boot delay although I am using an ssd for system files, I get stuck on boot. I tried reseting bios using the jumper but it's not working and I removed all but one 4gb ddr3 and still the problem persists.
Please help
This question was solved.
View Solution.

Update:
I removed the CMOS battery and re-installed it and everything works fine

Similar Messages

Ideacentre B520 won't boot past Lenovo splash screen after windows updates

This happened about 2hrs ago with my B520. Was working perfectly fine before this. Performed Microsoft updates as suggested, system prompted a re-boot to complete installation, system never came back completely. Only begins to boot and stops at the Lenovo splash screen at the very initial stage of boot. It never moves beyond the Lenovo Screen even after holding the power button and forcing shut-down. Someone please help!! Thanks.
Solved!
Go to Solution.

First try and see if it's not a lenovo little bug that happens to a lot people:
Disconnect the pc from power for like 5 minutes or longer. Then try to boot, see if it works again.
if it doesn't boot as normal yet , still let it be for at least 20 or 30 minutes to see if it boots after that.

Stuck at windows starting after bios update boot

Model: Satelitte P755-S5120
Part NO: PSAY1U-OVD026
OS: Windows 7 Home Premium 64 bit
I get stuck at starting windows everytime I restart my computer. This happened right after I installed a bios update and rebooted my computer to finish it. I could never get back in.
I tried running diagnostics but it didn't seem to find any errors. I tried restarting it in safe mode and all other modes but I keep getting stuck at starting windows.
Funny thing is when I restart my computer on safe modes, I could see the files loading and on all of them it always stopped on \windows\system32\drivers\CLASSPNP.SYS
Maybe that file is corrupted, I have no idea.
Also tried repairing, and after it loads window files it goes into a black screen and it stays there, nothing happens. I let it run for an hour or so.
So any ideas? I'm not a computer guy so I don't know what else to do. Please help.

If you didn't burn a repair disc, download one from here. Scroll down to Windows 7 System Repair Disc 64-bit.
Create a Windows 7 System Repair Disc
Use it to boot to the Windows Recovery Environment.
Try the Startup Repair from there. Sometimes it takes several times.
Also, run this disk check at a command prompt. It may take a long time.
chkdsk c: /r
Then try Startup Repair again.
-Jerry

Aperture stuck at splash screen after HD ejection.

I am running the latest version of Aperture with the latest version of Leopard. Aperture works fine and never crashes on my Mac Pro. But when I eject a LaCie Firwire 800 drive from the machine I am unable to launch Aperture. This drive has nothing on it related to Aperture, n Vault or Library. I can open Aperture fine without it connected, but as soon as I connect it and eject it, Aperture will only open the splash screen and do nothing else, no beach ball or antything.
Restarting the computer seems to be the only thing that resolves this issue, any thoughts on what this could be?
Thanks!

I have seen Aperture hang at the splash screen because it is waiting for disk devices. It sounds like your mac still thinks the Lacie drive is connected and is waiting for it. How did you eject it? Are you running any kind of soft RAID? How is the disk formatted?
That said, it's Lacie, so anything is possible. I have not seen much good said about their hard drives.

IPhone 5 will not boot up past startup screen after attempted update to iOS 8. Not recognized by computer.

Like everyone else today, I attempted to make the move to iOS 8, using my Mac's iTunes. All was running smoothly, the progress bar was nearing the end when I received the error that "the iPhone software update server could not be contacted." With a now useless phone, I restarted it, hoping for the best as I could do nothing. I am now stuck with a phone which will turn on to the white startup screen and black Apple Logo, then instantly shut down, leaving me to repeat the process. If I hold down the home button, I can enter what seems to be "Recovery Mode," with a red iTunes Logo, as opposed to the usual blue. From here, all internet sources I have found suggest that I should restore the phone, but that's really where I hit the problem. When I plug the phone in, when in Recovery Mode, I simply receive the "iPhone software update server could not be contacted" error again, leaving the phone not recognized by iTunes. In non-recovery mode, the phone appears to simply turn off so fast that iTunes has no time to find it.
Any one with similar problems or solutions?

This what happened to my iPhone 5 after I updated to iOS 8.0;
The update process was done smootly without problems thru
Over the Air.
Now when I cold start/boot my iPhone 5, my apple logo appears as it was
in iOS 7, but after 30 seconds or so, my Apple Logo dissappears the
screen goes black for 5-6 seconds, but then viola! I am at the Log-On
screen... Then I start using my iPhone.
Just like Chris above, I have done 10 reboots, (complete shut down and
restart), its always the same...
Other than this, my iPhone works just fine. I will not re-install the iOS.
From my past experience, re-installing the iOS does not change
these minor differences...

Mac stuck on white screen after software update

I updated to snow leopard and then then to 10.6.8. After the updates had installed, my computer restarted and now it's stuck on a white screen. No key shortcuts work at all, I've tried. None of them work. Every time I try to turn it on it's just frozen on a blank white screen. Twice it's gone to the apple logo and been able to start up after 20 or so minutes of being on the white screen but each time it froze. I don't know what to do.

There have been problems with the Apple servers not linking to support articles, so some links may not load the first time.
Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup – Computer Stops or Delays
Startup Issues - Resolve
Startup Issues - Resolve (2)

My mac pro stuck on startup screen after i update the itunes

please help me on my mac pro, after i update the itunes into a new version, i restart it and then it stucks into gray with the apple logo and some words/ letter about error appear in the screen

Hello jaydenmarcus,
The following article provides some useful information and troubleshooting steps that can help resolve recurring kernel panics.
OS X: About kernel panics
http://support.apple.com/kb/TS3742
Cheers,
Allen

IPOD stuck on loading screen after ios6 update!!

My ipod is stuck on the loading screen after updating to io6, when connected to the computer it is saying updated, but it stuck and remains on the update loading screen.

If not successful try the remaining items of:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Phone stuck at logo screen after ios7 update error

help! when trying to update to ios7 i got an unknown error. Now my iphone 5 is stuck at the black apple loading screen

I've encountered the same problem with my iPhone 4, part way through updating to ios7 amessage came up on my computer "itunes has encountered an error and needs to shut down" I'm now left with the apple symbol with a line underneath it on my phone. iteunes doesn't recognise that my phone is plugged into the computer nor can I switch my phone off.
Any suggestions?

B75A-G41 stuck in reboot cycle after bios update

Hi.
Updated to bios version 17.3 to hopefully utilize my 22nm i5 with 2400mhz RAM. Everything worked ok using version 17.1, but with max 1600Mhz Ram speed.
The update was done using Live update, because the updater available on the MSI site does not run on my system (!). (Win-7 64bit).
After flashing and reboot and clearing the CMOS this is what happens:
I get notified that the bios settings were reset. On the top there is a list of system resources. Everythign looks ok, the cpu, ram, and SATA devices are all there.
The MSI graphic is displayed shortly (maybe this happens first, not sure atm).
After I press F1 to enter setup with default values, it says Setup is loading in the lower left, but nothing happens for a few seconds.
Trying F2 to continue to boot also results in the same.
A few codes are posted in the lower right, these are C9, B4 and sometimes A2
The machine reboots and starts again with displaying codes, reboots etc.
Repeating the CMOS clearing has no effect, other than displaying the initial page with bios reset options.
I can not get into the bios at all.
I would appreciate any assistance.
Cheers,
Andreas

Try a full cmos clear. >>Clear CMOS Guide<<
In the future, don't flash the bios via any windows program or live update.
Download the version you wish to use, then use the forum flash tool.
>>Use the MSI HQ Forum USB flasher<<

Imac 8,1 does not boot stuck on blue screen

imac8,1 mid (2008) 20" stuck on blue screen after boot ,It starts in safemode, below is a list of thing i have check so far
1 Apple hardware test (says every thing is ok)
2 Disk utility repair (was successfull)
3 reset PRAM ,SMC
3 Boot for OSX dvd and reinstalled (still only starts in safe mode )
4 boot in single user mode and used fsck ( said every thing was ok)
Yet when i boot i get stuck on a grey/blue screen . it starts in safe mode though, Is there some EFI , firmware restore file that i can install ???
What else can it try????

Please closely follow Apple's advice in Gray screen appears during startup. There are a number of steps to take, be methodical and follow the directions closely.

X200 fails to boot up with blank screen

Hi guys, i came to the problem this morning. when i was trying to start up the computer, it failed to boot up. the machine was normally shut down last time. with no beep, the screen remains blank and black, without any change. after 2 seconds of pressing the powerkey, it is shut down with a short beep. here are what i tried:
1, use an external drive and a windows 7 disk. no reaction.
2,Remove AC and System battery. Press and hold the power button several times (3-5 time) for a count of 5 secondsReconnect AC and press the power button - if system starts normally, shut down and insert the battery. does not work.
by the way, the mahine was bought in Hongkong and still is in warranty. however, i am currently in Germany, and will stay for another 3 months.
anyone with any suggestions? thanks.
Solved!
Go to Solution.

got it fixed by clearing CMOS, wow
according to: http://forum.lenovo.com/t5/X-Series-ThinkPad-Laptops/Blank-screen-after-Bios-Upgrade-on-X200/ta-p/29...

Macbook does not boot. stuck at grey screen. have tried single user mode, but text stops at AppleIntelCPUPPowerManagement: initialization complete, without anymore prompts. no

macbook does not boot. stuck at grey screen. have tried single user mode, but text stops at AppleIntelCPUPPowerManagement: initialization complete, without anymore prompts. no hash key appears that will allow me to type in: fsck -fy
have my trials for IB in one week and my history notes are all on my hard drive, that has not been backed up. help please =(

macbook does not boot. stuck at grey screen. have tried single user mode, but text stops at AppleIntelCPUPPowerManagement: initialization complete, without anymore prompts. no hash key appears that will allow me to type in: fsck -fy
have my trials for IB in one week and my history notes are all on my hard drive, that has not been backed up. help please =(

Toshiba Satellite p75-A7200 stuck on toshiba logo after bios change

My Toshiba Satellite p75-A7200 is stuck on toshiba logo after bios change.
entered bios fine changes from UEFI to CSM boot and now i cannot enter bios or boot past toshiba logo.
Ive tried F2 tapping and holding while powering up the laptop(tried every Fkey,DEL,ESC, with and without FN key)
cannot re-enter bios.
Also i tried to run the bios update cd created multiple 1.50 1.40 even 1.00, it doesnt seem to read any media.
i tried holding C, FN+C and f and just about every key on the keyboard to get something to work. i had dvd as top of boot priority for a while now so i shouldnt have to try f12 or holding C before boot but i tried . it doesnt seem to read any media
i tried windows 8 install cd, Ubuntu, centos, nothing goes past toshiba logo and no errors, i dont get the non bootable device error so its seems to not be reading the dvd. (dvd does spin and make read noises) im trying to find my usb floppy drive to try a floppy version but it acts like its not reading any media.
I also pulled the HDD and all usb devices to make the dvd the only media available and with the HDD out it spins then toshiba logo then black screen with solid white horizontal curser on top left of screen.(only happens when hdd out)
is there some type of key combination that will force a bios update or a crisis recovery mode for bios.
I also Pulled the battery for 2 solid days(battery,cmos battery, and power supply and held power button for about 10 mins while watching tx to make sure the thing was drained before the 2 day sit with no power at all.
this happened the second i changed from UEFI to CSM boot so its not a motherboard problem or anything like that because all was well before this setting change.
I already pulled the HDD and backed it up to another drive and swapped it to elimiate that.
any ideas on a secret key combo to force a bios read from dvd or usb or anythng.
or another combo that im just missing to enter bios after CSM boot.
UPDATE
to do a crisis recovery on this laptop
1 get a usb stick and format it in fat or fat32
2 download "7zip" and install it if you dont have it.
3 download bios from toshiba website.
4 run the installer for bios but dont choose and option just close it we just want to extract the files to the location normally c:\splnvxxx where xxx is the version number like 150
5 goto the installed locaion "c:\splnv150" or whatever number.
6. find file os2014273a_150 or something similar. it will be an application, it will end in version number _150, and it will also have a disc image file of the same name. but we want the app.
7. right click on it and you should have an option 7zip then extract
once extracted there is a folder now archesxxxxxx_bios_v150_win
8 copy the bios file located in archesxxxxxblahblah/X64/BIOS.fd , BIOS.fd is the bios and just copy that to a BLANK usb thumb drive that was formatted with fat or fat32.
9. put usb into your satellite and unplug the power from it.
10 holding FN + ESC key together plug the power back in and press power button.
11. release keys FN and ESC if all is right it will have the power button and led on from blink abut every 1 second while it searches for the bios. once its done it will reboot and you should be good to go.
if it keeps cycling with the power button then the bios is named wrong or something is not right with the usb. try reformatting it again and make sure that the bios file is the ONLY thing on the drive.

Ok a little research and digging into the bios exe downloaded from toshiba shows this has INSYDE BIOS witch should have a recovery process wich i prepared a usb stick with just the bios.fd on it found some post around toshiba forums with different models using win +B or Fn + F but neither of these worked for me to force bios update
anyone with this model know the key combo to force recovery

27" 2009 iMac is stuck on white screen after OS X Maverick update

27" 2009 iMac is stuck on white screen after OS X Maverick update. How do I get past this White Screen? I have tried to use the PRAM reset, holding down Shift,Command, R, and P after turning off computer then when I turn it on, having those pressed until I see the apple symbol. I only hear one chime. Never get to a second chime. Thank you.

Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup - Gray Screen
Startup Issues - Resolve
Startup Issues - Resolve (2)

HPE 570t fails to boot, stuck on splash screen after bios update drom 7.11 to 7.15

Similar Messages

Maybe you are looking for