HPG72-250US Power Light Blinks, Caps Lock Light Stays On

So I have been having some problems with my computer, an HP G72-250US, that I bought a few years ago.  Namely, the screen would get black and white lines on it and freeze: Here's a pic.   What the screen looks like. 
A friend of mine told me that it could be a problem with the fan, so I decided I would try to take it apart.  After some success, I noticed the fan wasn't clogged or anything, so I put it back together.  When I did, the power button only turns on for a half a second, then shuts off.  It repeats this over and over again.  I noticed that the Caps Lock light stays on.  Doesn't blink, doesn't do anything. 
I looked around online (using my wifes computer) and all I could find was the HP LED error codes, which mention the Caps Lock or Number Lock light blinking, but nothing about the Power Button Light.  Could it be the same issue, a CPU failure? 
Thanks for any help!
UPDATE: 
So after watching my computer for a bit, the Caps Lock Light DOES do something.  I hope I can say this correctly so everyone can understand it:
The Caps Lock Light is on, the Power Button Light is off.  For the split second or two that the Power Button Light comes on, the Caps Lock Light goes out.  The LAN connector also lights up when the Power Button Light is on.  Everything is pointing to it blinking once, so I'm still thinking its a CPU problem.  Any thoughts?

EduarddeKam wrote:
It is not a real problem in the sense that is does not hinder me in my computer use, but it is something strange.
When a turn the computer off, the caps lock light on my keyboard turns on, only to turn off after I strat my computer.
You might consider zapping your PRAM.

Similar Messages

  • Laptop won't start quickly but power wifi and caps lock light keeps blinking

    Hi, it has happened before too but rarely but nowadays it happens on daily purposes.
    When I switch on my laptop after leaving it for 8-9 hrs, it won't start up but instead power, wifi and caps lock light keep blinking. I tried removing battery and pressing power button for few minutes but nothing happens. Then i left it like that with lights blinking and after 15 20 minutes it booted. I did same yesterday too. I left it like that it booted after 20 minutes..so My question is "why is this happening? Is it a motherboard issue or is it because of cold moisturous weather here and laptop takes time to get warm up?" Should I show it to HP Service center?

    Hi @Nishant5788
    Welcome to the HP Support Forums. I see that you are having a problem getting your notebook to boot up normally. As for what is causing the problem the blinking Caps Lock should tell us what is causing the problem as it should be blinking in a pattern. This HP document Computer Does Not Start and LEDs blink has a chart that will tell you what the blink codes mean.
    This is most likely a hardware issue and you can give us a call regarding repair options.  You can reach HP Total Care at 1-800-474-6836 in North America or start here if you live outside of North America.
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Compaq CQ58 blinking caps lock

    Hi all,
    I have a compaq CQ58 which has just been restored to factory settings and everything seems to be working fine. 
    However, my caps lock keeps blinking 3 every second and then a break of about 2 maybe 4 seconds.
    I can't find reference any details regarding this. All I could find is blinking caps lock and booting issues. This does not apply to me as laptops works as normal. 
    Not too sure but this might be related. I have removed the screen due to being smashed and laptop carrently runs on external screen while I'm waiting for a new screen. 
    Could someone advice please. 
    Thanks a lot. 

    Hi lokyt,
    I see that your Compaq has a blinking Caps Lock light. Unfortunately, this blink code is an indication of a hardware issue. According to this HP document Computer Does Not Turn On and the LEDs Blink three blinks mean that it is a memory failure.
    You can try removing and then reseating the memory. Here is the Maintenance and Service Guide for your model on page 36 you will find instructions on how to remove the memory. You will also find replacement part numbers if you need to replace the memory.
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Windows 10 will not shut down completely? Power light stays on(official july 29th upgrade)

    I just upgraded to windows 10 from windows eight and I'm facing shutdown problems because when I asked the PC to shut down; the screen goes off but the power light stays on and basically windows 10 does not shut down completely whenever I have to turn on my PC again, I have to force the power button down until it completely Shuts down and start it back up again.
    I tried several troubleshooting tactics wants & browsed YouTube videos and but nothing seems work and I've seen people on this forum complain about same thing and am hoping HP fixes the problem.

    YES!!!!! A Solution that worked.  Spread the news.  It has to do with the Intel Virtualization Tehnology. Didn't know what that was until this issue came up in Windows 10. First, find out if this is your issue.   1. I installed the 'Intel Processor Identification Utility' directly from Intel.2. After installation, open the program and go to the 'CPU Technologies' tab.3. If it says 'YES' for Intel Virtualization Tehnology, proceed. Solution...(at least on my system) 1. The next thing you have to do is go into the BIOS.  If you have not done this before, proceed at your own risk.         You need to restart the computer and enter the BIOS (for me I hit F10 at the HP screen)2. Within the BIOS, there is an 'Advanced Options' section3. In this section there is a line for 'Intel Virtualization Tehnology' and it will say enabled or disabled.  My computer said disabled.4. If this is the case, change the option to 'ENABLED'; then SAVE and EXIT from the BIOS.   The Computer will restart and from that point on Shut Down, Sleep, etc. has worked.  WOW this was a frustrating issue. Almost went back to Windos 8.  I take no credit for this solution, I pieced it together from other posts on this issue.  Hope this helps.

  • Balnk scrren, blinking caps lock light

    dv6 laptop showing black display when turned on, caps lock light blinking. I tried unplugging the power cord, removed battery as suggested, however, problem persists.
    This question was solved.
    View Solution.

    Hi Suzieg,
    I understand you’re getting a blank display when you turn on your laptop.
    You mentioned the caps lock light blinking when you turn the computer on. Here is a link that will allow you to check and see if the blinking of those lights on the notebook, match what you see in this link . A lot of the time the lights can blink in a certain pattern, I would like you to take a look at the listing of blink codes and let me know if the laptop  lights are blinking in that nature.
    When you open the link go down to the section titled “ LED's near Caps Lock and Number Lock keys blink when starting notebook”.
    Please respond back with your results.
    Thanks 
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • HT5019 unable to get turn on display after turning on the power button ,no caps lock is turning on too,even a light at unlock button to open display is not going down , mine was a late 2008 mac book pro ( 17 inch ).please help me to solve my problem

    unable to get my screen on even after turning on power button .
    light at display unlock was not going down ,
    no caps lock button turning on .
    please help me to rectify my problem apple community

    unable to get my screen on even after turning on power button .
    light at display unlock was not going down ,
    no caps lock button turning on .
    please help me to rectify my problem apple community

  • Dv6 6121se, wont start, power supply OK, caps lock blinking

    Hello,
    Can someone help me? I was playing a game when suddenly the laptop just restarted by itself and the next time it booted the caps lock key is just blinking, with the monitor off ( not even a small backlight on i ) but the lights on keyboard and mouse is lighted., i am running it on a Dynamic set of GPU so i was using that time a high performance GPU, power supply is also plug and the battery is also in. 1 out of 10 i tried starting it but it only opens for a 10 to 120 sec running time after that it restart again and same thing happens, the caps lock key just keep on blinking, i can turn off the blinking by pressing the right shift key, but thats it nothing happens, just the caps lock key. i just resenly reformat it because one of the integrated graphics cards were not performing will, but it has been 2 weeks already since this happen. i cant even go to start up test to see whats happening thru test. i was thingking and a friend of me said my hard drive could have been crashed or my cpu is burned? i hope not..

    Hi,
               Try the steps listed in the below link
    http://support.hp.com/us-en/product/HP-Pavilion-dv​6-Entertainment-Notebook-PC-series/5082212/model/5​...
    "I work for HP."
    Please click the "White Kudos" star to say thanks for helping.
    Please mark "Accept As Solution" if my help has solved your problem.

  • HP 655 Two times blinking CAPS LOCK after power on

    When i turn on a brand new hp 655 notebook the screen is black and CAPS LOCK light is bliking two times and there is a short break and agin. What i should do?

    Hello Michal1983,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    The issue you are describing appears to be a physical issue and I think it would be best if you contacted HP technical support for repair options.
    US support link to contact options for HP products purchased in the US.
    Outside of US support link to contact options for HP products purchased outside the US.
    I would like to thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • G42-415dx single blink caps lock - options

    My beloved G42 has bit the dust. I get nothing on the screen. The light on the caps lock key is doing the single blink. HP docs says this is the code for bad CPU.
    I tried blowing out dust.
    I tried unplugging, removing battery, holding power button 15 seconds, plug in and leave battery out and then turn on.
    I tried removing the RAM
    I've done every troubleshooting step I could find and it still gives me the single blink and doesn't boot.
    1) is there anything else I should try?
    2) Can I fix this myself by replacing the CPU?
    Thank you
    Aaron

    hi abennear
    i have same problem do you solve it or not ?? if you solve it please tell me how ??

  • Msi p67a-gd65 mouse and keyboard freeze - blinking caps lock.

    As the title says, my mouse and keyboard suddenly froze while I was chatting on Skype and I noticed that my system was still running. In fact, my razer mouse light was also blinking. The caps lock had a sort of sequential blink, although I'm not sure.
    Anyway, I had to use the power button to shut down the system and everything seems normal again. Does anyone know what would cause this? Is it a software issue or due to my board?
    I'm running 64-bit Windows 7 Ultimate.

    p67a-gd65 motherboard
    Intel i7 2600K
    2x MSI 6970 graphic cards
    Seasonic SS-850HT 850W PSU
    G.SKILL Ripjaws X Series 8GB (2 x 4GB)
    ADATA S599 system hard drive
    ADESSO keyboard and Razer Deathadder mouse
    This was the first time this sort of thing has happened. I did have to replace (RMA) my PSU once before due to a random shut down issue but that was resolved. I'm really curious as to why this would happen and I'm hoping it's a software issue and not something related to the USB ports on the board.

  • HP Dv6z-7200 Notebook blinking caps lock key, red wifi button

    I re-did the thermal paste on my computer (Dv6z-7200, AMD A10-4600m, Radeon 7670m, 6Gb RAM ) and i put it back together, and the screen does not come on, the power button lights up, the wifi key is red and then the caps lock key blinks indefinetly, and the fan comes on. Lucky for me my buddy has the same laptop so I took out the motherboard on mine and put it in his' with his' hard drive, RAM, wlan, etc. and it still didn't work. So it must be the motherboard, right? Could it be something with the BIOS? If it is the motherboard that is fried, could someone direct me to where i can get a new one? I tried the hp part surfer website, but could not find it. Thank you -Zach

    Hi Nayj424,
    Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your Compaq Presario CQ62-102TX Notebook and getting a blank or black screen on startup. Try performing a hard reset. When performing a hard reset please note remove any and all USB devices, and remove memory cards from the card reader slot. Disconnect all non-essential devices. If that does not help try to turn on the computer you start to press F11 repeatedly till the menu opens. You can do a system restore.
    Hope this is helpful.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Dv7-4173 no boot, blinking caps lock

    I have an HP DV7-4173us, running Windows 7 pro 64 bit.
    Up to date, hardware is stock, very few problems in the year I've had it.
    It was running well up until yesterday, when I pushed the power button to wake it up from hibernate mode.
    Fans came on, caps light flashed once, then everything went queit. The caps lock light blinks once per second, and the f12 light is Amber. No other signs of life.
    I did the power reset (remove battery, discharge by holding power button, wait, ac power only) and nothing changed. I removed, checked, and reseated the ram, wifi, and all drive connections. No change.
    I suspect the cpu needs to be reseated; before I do surgery, does anyone here have any ideas?

    I've been having the same problem with my laptop not coming out of hibernation. I used to periodically get it to work by trying various hard re-boots/re-sets, but it's been weeks of trying now with no luck. I even purchased a new battery since my original one held no charge on it's own. The new battery didn't help at all. Hoping someone has something to help!

  • Blinking Caps Lock and Num Lock Keys Lit after spilling water Macbook Pro.

    What does it mean when the caps lock and Num lock key blink, after spilling liquid on a Macbook Pro? Does this mean that liquid is still present? Also, the white light by the latch was blinking. What does this all mean?

    Possible liquid damage.
    Immediately disconnect all peripherals, power cord & remove the battery. Turn the computer over with the lid partly open and the hinge facing upward to let the liquid drain. Do not flop it over and lay it flat - you want to separate it from the moisture. Place paper or cloth towels under the machine to sop up the mess.
    After the computer disgorges whatever you spilled on it, don't turn it on for 72 hours or longer. You want to computer to dry out completely before turning it on again.
    Some users here swear by hairdryers. Blow drying the innards may bake whatever was in the liquid onto delicate computer components. Better to let the computer air dry.
    Use plain tepid water to clean out the computer. If you spilled iced beverage more than likely this ice fried the hot motherboard.
    Sugary, acidic or milky drinks will almost always cause problems later on as the residue starts slowly corroding the computer innards.
    Swab down any sticky parts with distilled water or denatured alcohol.
    If none of the above works, you will need to take the computer to a repair shop. Apple Care does not cover liquid or food damage. Believe me, they can tell. So the old "my computer stopped working" line is not going to work.

  • G62 fans run, black screen, blinking CAps Lock

    I went to turn on my G62 today and i heard the fan running and it tried to boot up but stopped. The screen was completely black and the caps lock key blinks steady one blink every like 5 seconds.
    It was running perfectly fine yesterday!
    Someone told me it sounds like a bios problem but when i searched the forum for a fix it said to start it up while holding the windows and B keys and turning it on. This didnt do anything and now i need a fix?
    Anyone that can help it would be appreciated greatly!

    Hard reset fixes issue.
    But still do it again as follows:
    1) Turn off laptop.
    2) Remove battery and AC plug.
    3) Press and hold Power button for 1 minute, do it thrice.
    4) Now put battery and plug AC.
    5) Now press power button.
    6) Go to BIOS settings and reset all.
    Above worked for me.
    | Please hit Kudos, if I help you! |
    | |
    | VA |
    |___________________________|

  • HP G42-475DX Blinking Caps Lock

    Good Day
    I currently have an HP G42-475dx which was purchased about a year and a half ago. This laptop has known to run fairly hot (around 80 degrees celcius). 
    I was using the laptop to play music, while the screen went blank. I took off the laptop.
    1st - Upon putting on the laptop, the caps lock LED blinked twice (Indicates corrupted bios). I then went to power off, and leave it off for 10 minutes. 
    2nd - Upon leaving off for a while, the caps lock is now blinking 5 times upon powering on (General system board failure). I then proceeded to open up the laptop and remove the CMOS battery. 
    Upon removing the battery, and leaving the laptop off overnight.. The caps lock is now blinking once, (which indicates CPU not functional.)
    I am unsure whether the motherboard has gone bad, or if its just the CPU itself. I need to get this laptop back and running for when i start school..
    Any help would be appreciated.. Thanks!

    SOMEGUY1771 wrote:
    Good Day
    I currently have an HP G42-475dx which was purchased about a year and a half ago. This laptop has known to run fairly hot (around 80 degrees celcius). 
    I was using the laptop to play music, while the screen went blank. I took off the laptop.
    1st - Upon putting on the laptop, the caps lock LED blinked twice (Indicates corrupted bios). I then went to power off, and leave it off for 10 minutes. 
    2nd - Upon leaving off for a while, the caps lock is now blinking 5 times upon powering on (General system board failure). I then proceeded to open up the laptop and remove the CMOS battery. 
    Upon removing the battery, and leaving the laptop off overnight.. The caps lock is now blinking once, (which indicates CPU not functional.)
    I am unsure whether the motherboard has gone bad, or if its just the CPU itself. I need to get this laptop back and running for when i start school..
    Any help would be appreciated.. Thanks!
    It's most likely the motherboard or a corrupt BIOS.  CPUs rarely fail.

Maybe you are looking for

  • Email excel truncating the output - why?

    Using the foloowing code to send a report output as and excel attachment in e-mail. But the final Excel Spread Sheet at SCOT / SOST does not show all the rows.       CALL METHOD DOCUMENT->ADD_ATTACHMENT         EXPORTING           I_ATTACHMENT_TYPE  

  • Why is it that I can't save pictures from FB?!  It does it for other apps , saved one time now it's jacked up .

    I just update my iPhone 4 to iOS 6 yesterday an it worked great but now its glitching . Can't use pictures to save off of face book my phone stopped vibrating,typing is slow, couldn't use my phone to talk on the phone all day unless it was on speaker

  • Trouble using iphoto on external drive

    Hi, I have an i photo library on a WD My Passport external drive and am having trouble getting photos off of the drive. When I select he photos I'd like to export, where I 'd like them to go, and hit okay, I get an error message that says: Unable to

  • OEPE - OSB project

    After long time, i was able to install successfully Weblogic along with OEPE and OSB along with OEPE IDE, When i start to create Oracle Service Bus Configuration Project , i get the following error. Can any one please help me to resolve this issue. T

  • How to stop ERP Quotation for BP with role Prospect

    Hi, We have implemented cross system transactions from CRM opportunity to ERP Quotation. We create prospects with sales area data in CRM UI. Though in GUI unless the role sold- to party is selected the sales area data tab is not activated, however no