HPHP Officejet Pro x64 The specified module could not be found
Installed the full version and then tried the basic version for windows xp. When asked to plug in the printer the only item I can see installed is fax- HP Officejet Pro 8610. I get a message that there was a problem with the connection and it reads.
HPHP Officejet Pro 8610
The specified module could not be found.
Looking for advice. I tried several printer USB cords and different USB locations on the computer.
Hi @Pasi
Running the Print and Scan Doctor might help. The HP Print and Scan Doctor is a free utility (tool) that helps to quickly resolve common printing, scanning and connectivity issues including but not limited to:
Connectivity:
USB: Verifies that the USB connection from your computer to the HP product is working correctly.
Network: Verifies that the network connection between your computer and your network is working correctly.
Device Status Test: Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
Driver Check: Checks for missing or corrupt driver files.
Device Manager: Checks for problems in Device Manager that would prevent printing.
Device Online: Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
Print Queue: Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
Port Match: Checks the port settings for the HP product.
Device Conflicts: Checks for conflicts with other drivers, such as other printer brands.
Ink Issues: Checks the cartridges and ink levels for issues that affect print quality.
Print Settings: Checks and adjusts the print quality settings.
Test Print: Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
Scan Tests: Checks the scan mechanism, drivers, and registry entries.
Source:Try the HP Print and Scan Doctor for Windows
Click here to download and run the Print and Scan Doctor> >>>>> www.hp.com/go/tools
If that does not resolve the issue, post back and let me know if there are any symbols other than green check marks and what they are next to of course. The wrench is not always easy to spot as the wrench and the check mart are in the green circle.
If you see only green check marks (), the tool did not find any problems.
If you see green wrenches (), the utility identified an issue and corrected it automatically.
If you see yellow exclamation points (), the test failed and required user action, but the step was skipped.
If you see a red X (), follow the on-screen instructions to resolve the issue.
Thanks, I look forward to hearing back from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP
Similar Messages
-
Error message @ Win 7 Pro start up "There was a problem starting C:\programdata\ofpviaowu.dat - The specified module could not be found."
This error message appears every time I start (boot) my computer and windows starts (Firefox is not running at start up). Firefox 15.01 functions properly otherwise.
This started after I installed the 15.0.1 patch.
I uninstalled and reinstalled Firefox but the problem remains. Google search for "ofpviaowu.dat" came up with "2012-08-29 Firefox Release 15 Startup Crash Report" as the only listing.
Is this a Firefox issue?hello QAMgr, i'm not aware of this file being a part of firefox & also find it slightly suspicious that there are no more google search hits. maybe this is malware related... could you do a full scan of your system with the security software already in place and/or a different tool like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes]?
[[Troubleshoot Firefox issues caused by malware]] -
I initially got the Error -2032 message after downloading the newest version of itunes. I read a geek blog that said to uninstall Quicktime and I did that a bunch of times. I also uninstalled and reinstalled itunes repeatedly. None of this works. I noticed that the apple website said the requirements for the new quicktime/itunes download included an intel processor and I have a celeron processor, so I wondered if that was the problem, although everything has been running fine up until now, so I don't know. It also doesn't address the missing .dll file, but I may have accidentally deleted that because I went into the registry to try and unload some Quicktime files when I uninstalled Quicktime. I did this at the suggestion of the blog, but I may have screwed it up. Now I need to repair the missing .dll and still try to get itunes running
ErikEJ wrote:
Have you set your solution target to "Any CPU" ?? If so, set to "x86", as SQL Compact only runs in WoW mode on x64. Or use corflags.exe /32BIT+ against your project output (.exe file).
ErikEJ wrote:
Look at this blog post for a walk-through: http://erikej.blogspot.com/2008/01/x64-and-sql-compact.html
Hello everyone,
I have the same problem as mentioned above "Unable to load DLL 'elev.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E) ", when trying to load the dll file into a window application. I developed a window application in VS2005 and want to import a dll file from another program into my project and use it. But when I try to call one of the function in the dll file, I got the error message "Unable to load dll 'elev.dll". I try all options that say it works to solve this problem, but somehow it doesn't work for me. I put the "elev.dll" file in the bin folder and use P/Invoke to import the dll file into my project. Can anyone help me out with this? thanks and really appreciated!
Here is how I import the dll:
[DllImport(@"D:\elev.dll")]
//[DllImport("emap.dll", SetLastError = true)]
private static extern void EMA_Init();
and in the code, I call the function above but failed to load the dll file
EMA_Init(); -
I'm new to ADO.NET and need help with this error.
Currently running Vista Home Premium 64 and Visual Studio 2008 Trial.
1. Create Win form app.
2. Add new data source...
3. New connection - SQL Server Compact 3.5 - Northwind.sdf
4. Highlight Products and Suppliers.
5. Drag both onto Win form
6. Run with debug
7. Error message "Unable to load DLL 'sqlceme35.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E)"
some blogs advice change dir in SQL Server Compact 3.5 in regedit but regedit doesn't even have SQL Server Compact 3.5; only SQL Server\SQLExpress.
reinstall SQL Server Compact 3.5 and problem still exists.
anyone knows how to fix this problem?ErikEJ wrote:
Have you set your solution target to "Any CPU" ?? If so, set to "x86", as SQL Compact only runs in WoW mode on x64. Or use corflags.exe /32BIT+ against your project output (.exe file).
ErikEJ wrote:
Look at this blog post for a walk-through: http://erikej.blogspot.com/2008/01/x64-and-sql-compact.html
Hello everyone,
I have the same problem as mentioned above "Unable to load DLL 'elev.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E) ", when trying to load the dll file into a window application. I developed a window application in VS2005 and want to import a dll file from another program into my project and use it. But when I try to call one of the function in the dll file, I got the error message "Unable to load dll 'elev.dll". I try all options that say it works to solve this problem, but somehow it doesn't work for me. I put the "elev.dll" file in the bin folder and use P/Invoke to import the dll file into my project. Can anyone help me out with this? thanks and really appreciated!
Here is how I import the dll:
[DllImport(@"D:\elev.dll")]
//[DllImport("emap.dll", SetLastError = true)]
private static extern void EMA_Init();
and in the code, I call the function above but failed to load the dll file
EMA_Init(); -
Hi,
I have a asp.net web application running on windows server 2008 with oracle server 10g installed.
now we are planning to run application on another server with same server as database server. but when the deployed on new server the login page comes up and after login System.DllNotFoundException: Unable to load DLL 'OraOps10.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E) exception is thrown. any help would highly be appreciated.Did you run the ODAC installer, OUI or xcopy, or did you just copy over Oracle.DataAccess.dll to the new machine? If the latter, then you need to run the installer to put in all the necessary Oracle DLLs ODP.NET references.
-
I have deployed my SSIS packages on SQL 2008 server.
I have a .bat file which will invoke these packages and also the bat file is placed in the server where the SSIS packages are deployed.
Scenario 1:
I double clicked on the bat file to invoke the SSIS packages and ; this executed successfully
Scenario 2:
I have used the IBM Tivoli work scheduler(TWS) to invoke the bat file which in tern will invoke the ssis packges;
but when i do this i am getting the below error
Code: 0x8007007E
Source: SSIS_Master_Event_Data_Transfer Connection manager "Config DB"
Description: The specified module could not be found.
Config BD is a connection manager which will get the connection string from the config file of the SSIS package.
Please help me to resolve this issue.
Regards,
PrakashCheck you TWS jobmanrc.cmd configuration file. You may need to add a PATH environment variable in that file that includes your SQL Server file locations. When TWS jobs are executed, they may not be executing with the same
PATH variable as when you execute the SSIS outside of TWS. -
Error :the specified module could not be found --oci.dll : Oracle9i
hi ,
i m trying to connect thru my java code to the oracle on my system ,while creating the DSN it gives the error
"the specified module could not be found" for the file oci.dll.
earlier it was not able to look for the sqresus.dll which i copied to the winnt/system directory , and after this oci error is coming , anyone knowing it please guide
with regards,Make sure it is the same version of 9i (i.e. 9.0.x or 9.2.x) for both OO4O and ODBC. Also make sure that the ORACE_BASE\ORACLE_HOME\BIN directory is in your search path AND last, check your windows directories and subdirectories for duplicate copies of OCI.DLL (or anywhere else on the PC for that matter). Sometimes MicroSoft will include one and it is usually an OLD one.
-
Dboraslib.dll - Error 126 : "The specified module could not be found."
Hi,
After installation XI 3.0 and adapters, the dispatcher(dispwork.exe) is failing to start in a ABAPJ2EE system (web AS 6.40).
The dev_disp trace file shows the following error:
Please do help to resolve this problem.
trc file: "dev_disp", trc level: 1, release: "640"
Mon Aug 09 12:14:43 2004
kernel runs with dp version 124000(ext=101000) (@(#) DPLIB-INT-VERSION-124000-UC)
length of sys_adm_ext is 524 bytes
ERROR => DlLoadLib: LoadLibrary(dboraslib.dll) Error 126 [dlnt.c 237]
Error 126 = "The specified module could not be found."
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 1
intno 0
make: multithreaded, Unicode
pid 2908
***LOG Q00=> DpSapEnvInit, DPStart (00 2908) [dpxxdisp.c 1093]
shared lib "dw_xml.dll" version 1 successfully loaded
shared lib "dw_xtc.dll" version 1 successfully loaded
shared lib "dw_stl.dll" version 1 successfully loaded
shared lib "dw_gui.dll" version 1 successfully loaded
Mon Aug 09 12:14:48 2004
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3878]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 10528 (1316)
DpShMCreate: sizeof(tm_adm) 2506872 (12472)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpShMCreate: sizeof(comm_adm) 290000 (580)
DpShMCreate: sizeof(vmc_adm) 0 (372)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: SHM_DP_ADM_KEY (addr: 06440040, size: 2919328)
DpShMCreate: allocated sys_adm at 06440040
DpShMCreate: allocated wp_adm at 06441B58
DpShMCreate: allocated tm_adm_list at 06444478
DpShMCreate: allocated tm_adm at 064444A0
DpShMCreate: allocated wp_ca_adm at 066A8518
DpShMCreate: allocated appc_ca_adm at 066AE2D8
DpShMCreate: allocated comm_adm_list at 066B0218
DpShMCreate: allocated comm_adm at 066B0230
DpShMCreate: allocated vmc_adm_list at 066F6F00
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 066F6F28
DpShMCreate: allocated wall_adm at 066F6F30
MBUF state OFF
Mon Aug 09 12:14:49 2004
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 614 MB
<ES> 613 blocks reserved for free list.
ES initialized.
Mon Aug 09 12:14:52 2004
J2EE server info
start = TRUE
state = STARTED
pid = 3216
argv[0] = C:\usr\sap\SXI\DVEBMGS00/j2ee/os_libs/jcontrol.exe
argv[1] = C:\usr\sap\SXI\DVEBMGS00/j2ee/os_libs/jcontrol.exe
argv[2] = pf=C:\usr\sap\SXI\SYS\profile\SXI_DVEBMGS00_cgnlpt036
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1352
argv[5] = -DLISTEN_PORT=1353
argv[6] = -DSAPSYSTEM=00
argv[7] = -DSAPSYSTEMNAME=SXI
argv[8] = -DSAPMYNAME=cgnlpt036_SXI_00
argv[9] = -DSAPPROFILE=C:\usr\sap\SXI\SYS\profile\SXI_DVEBMGS00_cgnlpt036
argv[10] = -DFRFC_FALLBACK=ON
argv[11] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.0 2.0 3.1.1) [dpxxdisp.c 1455]
***LOG Q0K=> DpMsAttach, mscon ( cgnlpt036) [dpxxdisp.c 9701]
Mon Aug 09 12:14:54 2004
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 1
Release check o.K.
Mon Aug 09 12:15:33 2004
ERROR => W0 (pid 3224) died [dpxxdisp.c 12152]
ERROR => W1 (pid 3232) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 3240) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 3248) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 3256) died [dpxxdisp.c 12152]
ERROR => W5 (pid 3264) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 3272) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 3280) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-3224 (SIGUSR2)
ERROR => DpWpKill(3224, SIGUSR2) failed [dpxxtool.c 2464]
killing W1-3232 (SIGUSR2)
ERROR => DpWpKill(3232, SIGUSR2) failed [dpxxtool.c 2464]
killing W2-3240 (SIGUSR2)
ERROR => DpWpKill(3240, SIGUSR2) failed [dpxxtool.c 2464]
killing W3-3248 (SIGUSR2)
ERROR => DpWpKill(3248, SIGUSR2) failed [dpxxtool.c 2464]
killing W4-3256 (SIGUSR2)
ERROR => DpWpKill(3256, SIGUSR2) failed [dpxxtool.c 2464]
killing W5-3264 (SIGUSR2)
ERROR => DpWpKill(3264, SIGUSR2) failed [dpxxtool.c 2464]
killing W6-3272 (SIGUSR2)
ERROR => DpWpKill(3272, SIGUSR2) failed [dpxxtool.c 2464]
killing W7-3280 (SIGUSR2)
ERROR => DpWpKill(3280, SIGUSR2) failed [dpxxtool.c 2464]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:43 2004
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Mon Aug 09 06:45:43 2004
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3224 Ended no 1 0 0
1 DIA 3232 Ended no 1 0 0
2 UPD 3240 Ended no 1 0 0
3 ENQ 3248 Ended no 1 0 0
4 BTC 3256 Ended no 1 0 0
5 BTC 3264 Ended no 1 0 0
6 SPO 3272 Ended no 1 0 0
7 UP2 3280 Ended no 1 0 0
Dispatcher Queue Statistics Mon Aug 09 06:45:43 2004
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 6 ( 66%), shm 3 ( 33%)
since last update total 9, udp 6 ( 66%), shm 3 ( 33%)
Dump of tm_adm structure: Mon Aug 09 06:45:43 2004
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Aug 09 06:45:43 2004
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:48 2004
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3216)
killing process (3216) (SOFT_KILL)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
NiSelClear: removed hdl 3 from selectset
DpDelSocketInfo: del info for socket 3 (type=7)
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 456
NiSelClear: removed hdl 4 from selectset
DpDelSocketInfo: del info for socket 4 (type=9)
NiBufClose: clear extensions for hdl 4
NiBufSetStat: bufstat of hdl 4 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 4 / socket 448
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (3172) (SOFT_KILL)
Stop icman
killing process (3196) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:3172 HANDLE:472)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:49 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3172 HANDLE:472)
[DpProcDied] Process died (PID:3196 HANDLE:464)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
[DpProcDied] Process lives (PID:3216 HANDLE:440)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:50 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:51 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:52 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:53 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:54 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:56 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:57 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:58 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:59 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:00 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:01 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:02 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:03 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:04 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:05 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:06 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3216 HANDLE:440)
NiIMyHostName: hostname = 'cgnlpt036'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9927]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 5 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 5
NiBufSetStat: bufstat of hdl 5 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 5 / socket 368
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 2908) [dpxxdisp.c 8460]
Good Bye .....Hi,
Thanks for the reply.
dboraslib.dll is properly installed - I checked the registry and physical location of the file.
The problem was : Environment variable "Path" not being set properly for the "oracle jre".
Solution:
After setting the path, the dispatcher started to run properly without any problems.
Path=<Drive>\oracle\ora92\bin;<Drive>\Program files\Oracle\jre\1.3.1\bin; <Drive>\Program files\Oracle\jre\1.1.8\bin
FYI - We are using WIN2K with SP4 and oracle DB 9.2
Regards,
Sridhar -
The specified module could not be found. (Exception from HRESULT: 0x8007007E)
Hi,
We have an exisiting .NET MVC project which uses crystal reports versions 2008 (dlls of version 12.0.). No we have Crystal Reports 2011 for.NET SDK is installed and I've updated all the crystal related dlls (Enterprise.Framework.dll, CrystalDecisions.Chared, CrystalDecisions.Web ...) to newer version which is 14.0. After this upgrade, when I run application, I am getting the following error:
The specified module could not be found. (Exception from HRESULT: 0x8007007E)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.FileNotFoundException: The specified module could not be found. (Exception from HRESULT: 0x8007007E)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[FileNotFoundException: The specified module could not be found. (Exception from HRESULT: 0x8007007E)]
System.Reflection.Assembly._nGetModules(Boolean loadIfNotFound, Boolean getResourceModules) +0
System.Reflection.Assembly.nGetModules(Boolean loadIfNotFound, Boolean getResourceModules) +40
System.Reflection.Assembly.GetTypes() +28
System.Web.Mvc.TypeCacheUtil.FilterTypesInAssemblies(IBuildManager buildManager, Predicate`1 predicate) +161
System.Web.Mvc.TypeCacheUtil.GetFilteredTypesFromAssemblies(String cacheName, Predicate`1 predicate, IBuildManager buildManager) +63
System.Web.Mvc.ControllerTypeCache.EnsureInitialized(IBuildManager buildManager) +115
System.Web.Mvc.DefaultControllerFactory.GetControllerTypeWithinNamespaces(RouteBase route, String controllerName, HashSet`1 namespaces) +58
System.Web.Mvc.DefaultControllerFactory.GetControllerType(RequestContext requestContext, String controllerName) +634
System.Web.Mvc.DefaultControllerFactory.CreateController(RequestContext requestContext, String controllerName) +58
System.Web.Mvc.MvcHandler.ProcessRequestInit(HttpContextBase httpContext, IController& controller, IControllerFactory& factory) +118
System.Web.Mvc.MvcHandler.BeginProcessRequest(HttpContextBase httpContext, AsyncCallback callback, Object state) +46
System.Web.Mvc.MvcHandler.BeginProcessRequest(HttpContext httpContext, AsyncCallback callback, Object state) +63
System.Web.Mvc.MvcHandler.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData) +13
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +8770194
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155
We have another ASP.Net project, which is working fine after I update older crystal dlls to newer ones. This project is working fine.
Thanks in advanceThis error I am getting, after I update the "CrystalDesicions.Web.dll" from version 12 to 14.0. Any I dea on this?
After, I verified with fusin log and ProcessMonitor, they are reporting on this:
path to BusinessObjects.Licensing.KeyCode.Decoder.dll is not found. Does this dll is used by CrystalDecisions.Web.dll?
and I don't have any mixed reference.
Any help? -
The specified module could not be found
This error box pops up when I try to open an image (the specified module could not be found) also the icon for photoshop
would not respond on the taskbar.I can open my images in other programmes,would reinstalling photoshop be a good idea.
Thanks.Using PS cc, the problem relates to all images as they are set to open in PS, and the message appears immediately,.i have noticed that my start up screen has changed in appearance I am using a Asrock board - could be a coincidence but the problem has only started this week 08.02.15
I am using windows 7 home premium
Thanks. -
Hello Everyone,
We are getting an error while trying to create an Universe via Microsoft -> MS Analysis Services 2014 -> OLEDB for OLAP Provider under Connection in UDT -"DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found." We have installed BI 4.1 SP05 in our system. As per earlier posts in scn in BO XI 3.x this issue used to be for improper installation of Integration KIT but in our scenarion Integration KIT is within the BO 4.1 package so no seperate installation is required. Moreover I have checked whether all the driver is present under file: "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer\drivers" and seems everything is fine. But still I am getting this error. One important point is we could use IDT because in IDT still we don't have option to connect with 'Microsoft Analysis Services - 2014 (XMLA)' as we are using Microsoft Analysis Services 2014 version.
Kindly help if anyone has faced the same problem with SAP BO 4.1.
Thanks and Best Regards,
GhosalHello Everybody,
The problem is solved now after installing "OLEDB drivers from SQL Server 2012 Feature Pack". We had OLEDB drivers that comes directly from SQL Server but that did not worked out in our case.
Thanks for your support.
Best Regards,
Ghosal -
Hi All,
I have existing SSAS project. Previously it was working but now its showing following error:
The specified module could not be found. (Exception from HRESULT: 0x8007007E) (System.Windows.Forms)
Please provide the solution.
Thanks & Regards,
Vivek SinghHi Vivek,
According to your description, you are experiencing the error "The specified module could not be found. (Exception from HRESULT: 0x8007007E) (System.Windows.Forms)" when opening the SQL Server Analysis Services project that can be opened
without any problems, right?
Based on my research, the issue is caused by that some .dll files in your SSAS instance are corrupt. In your scenario, can you open other SSAS project? Please download the Adventure Works for SQL Server 2012 sample project and check if
you can open it or not.
https://msftdbprodsamples.codeplex.com/releases/view/55330
Besides, here are some similar issue with your, please see:
https://social.technet.microsoft.com/Forums/en-US/29e3cef1-4699-4710-9aa5-d56cf4a279c5/the-specified-module-could-not-be-found-exception-from-hresult-0x8007007e-systemwindowsforms?forum=sqlanalysisservices
https://social.technet.microsoft.com/Forums/en-US/b2faae67-19af-4f50-88c6-5a427556df3e/error-encountered-when-creating-new-integration-services-project-0x8007007e?forum=sqlintegrationservices
Regards,
Charlie Liao
TechNet Community Support -
I am using intermec printer (directly loading to the printer no system used for printing) for this program and if i run this,i'm getting this below error
"Unable to load DLL '/system/usr/lib/libidlprinter.so': The specified module could not be found. (Exception from HRESULT: 0x8007007E)"}
any help on this .........
Thanks in advance.
using System.Globalization;
using Intermec.Printer;
using System;
using System.IO;
using System.Threading;
class TestCommunicationUSBHost
static UI.Canvas _canvas;
static UI.Keypad _keypad;
static UI.Canvas.Text _exitInstruction;
static UI.Canvas.Text _appliCationTitle;
// static UI.Canvas.Text _companyname;
static string _operatorCodeValue;
static UI.Canvas.Text _operatorCodeDisplayText;
private const string operatorCodeDisplayHeader = "SCAN Code: ";
static PrintControl printControl = new PrintControl();
static Drawing drawing = new Drawing();
private static bool _isExitKeyPressed = false;
// private static Communication.USBHost _usbHost;
static int Main(string[] args)
// Init new UI canvas
_canvas = new UI.Canvas();
// Set up some colors to use
Color white = new Color(255, 255, 255, 255);
Color blue = new Color(50, 100, 150);
// Add UI black background
UI.Canvas.Rectangle bg = new UI.Canvas.Rectangle(0, 0, _canvas.Width, _canvas.Height, blue);
_canvas += bg;
// Add Line
UI.Canvas.Line ln = new UI.Canvas.Line(10, 35, 300, 35, white);
_canvas += ln;
// _companyname = new UI.Canvas.Text(30, 45, "KEYBORD DEMO", "Univers Bold", 18, white);
// _canvas += _companyname;
// Add UI keycode text
_exitInstruction = new UI.Canvas.Text(20, 200, "Press [F4] to EXIT.", "Univers Bold", 18, white);
_canvas += _exitInstruction;
_appliCationTitle = new UI.Canvas.Text(05, 05, " A1 Technologies", "Univers Bold", 23, white);
_canvas += _appliCationTitle;
_operatorCodeDisplayText = new UI.Canvas.Text(20, 100, operatorCodeDisplayHeader, "Univers Bold", 20, white);
_canvas += _operatorCodeDisplayText;
// Set up keypad event handler
_keypad = new UI.Keypad();
_keypad.KeyDown += new UI.Keypad.KeyEventHandler(KeyHandler);
// Set up timer event handler
UI.Canvas.Timer timer = new UI.Canvas.Timer();
timer.Interval = 1000;
timer.Tick += new UI.Canvas.TimerEventHandler(TimerHandler);
timer.Start();
//int USBHost port o or Setup USBHost
Communication.USBHost _usbHost = new Communication.USBHost("/dev/ttyUSB0");
_usbHost.Open();
// Enter UI main loop
_canvas.Run();
// Cleanup UI
_canvas.Dispose();
_keypad.Dispose();
return 0;
public static void KeyHandler(Object o, UI.Keypad.KeyEventArgs eventArgs)
int keycode;
keycode = eventArgs.KeyChar;
if (keycode == 4)
_isExitKeyPressed = true;
return;
public static void TimerHandler(Object obj, UI.Canvas.TimerEventArgs eventArgs)
if (_isExitKeyPressed)
UI.Canvas.Timer timer = (UI.Canvas.Timer)obj;
timer.Stop();
_canvas.Exit();
else
// Open the first USB host device and read any data sent
Communication.USBHost usbHost = new Communication.USBHost("/dev/ttyUSB0");
usbHost.Open();
if (usbHost.IsOpen)
Console.WriteLine("Opened /dev/ttyUSB0 ({0})", usbHost.HIDName);
FileStream fileStream = usbHost.GetStream();
try
int timeout = 0;
int i;
while (timeout < 5)
// Console.WriteLine("Exiting in {0} secs", 10 - timeout);
Byte[] bytes = new Byte[256];
if ((i = fileStream.Read(bytes, 0, bytes.Length)) > 0)
// string data = System.Text.Encoding.ASCII.GetString(bytes, 0, bytes.Length);
string data = System.Text.Encoding.ASCII.GetString(bytes, 0, i++);
_operatorCodeValue = data;
// _operatorCodeValue = _operatorCodeValue + data;
_operatorCodeDisplayText.Data = operatorCodeDisplayHeader + _operatorCodeValue.Substring(_operatorCodeValue.Length - 7, 7);
int leftCordinate = 40;
drawing.Clear();
Drawing.Text line1Text = new Drawing.Text();
line1Text.Point = new Point(leftCordinate + 30, 40);
line1Text.Data = _operatorCodeValue.Substring(_operatorCodeValue.Length - 7, 7);
line1Text.Height = 18;
line1Text.FontName = "CG Times Bold";
drawing += line1Text;
drawing.PartialRendering = true;
printControl.PrintFeed(drawing, 4);
else
Thread.Sleep(1000);
timeout++;
catch (Exception ex)
Console.WriteLine("Exception reading /dev/ttyUSB0: {0}", ex.Message);
// Wait a short while
Thread.Sleep(1000);
// Clean up
// usbHost.Dispose();
return;Hiya,
The error is because the app tried to import that driver but it was not found. So, you will need
to recheck your project setup, provide locations for imports, etc. I am not familar with Intermec Printer.
The code snippet does not show any information about the DLL import, check there too.
Hope this helps. :) -
Hi,
I am trying to install the SQL 2012 SP2 in one of the servers. I am getting the error as :
TITLE: SQL Server Setup failure.
SQL Server Setup has encountered the following error:
The specified module could not be found. (Exception from HRESULT: 0x8007007E)
Error code 0x84B10001.
The same setup is working in other servers, but on a particular server I am getting this error.
Server configuration: Windows server 2008 r2 standard edition, servvice pack 1 , 64 bit OS
How to fix this?
ThanksHi Venkatzeus,
Based on my research, the issue is caused by that some .dll files are corrupt or missing during the installing of SQL Server 2012 SP2.
In order to troubleshoot this issue, please view the detail error message in SQL Server Setup Log Files. We can read the Summary text under %programfiles%\Microsoft SQL Server\110\Setup Bootstrap\Log\, and the Detail text in the place %programfiles%\Microsoft
SQL Server\110\Setup Bootstrap\Log\<YYYYMMDD_HHMM>\Detail.txt. For more details, please see:
View and Read SQL Server Setup Log Files
Besides, here are some similar issues for your references:
https://social.technet.microsoft.com/Forums/en-US/29e3cef1-4699-4710-9aa5-d56cf4a279c5/the-specified-module-could-not-be-found-exception-from-hresult-0x8007007e-systemwindowsforms?forum=sqlanalysisservices
https://social.technet.microsoft.com/Forums/en-US/b2faae67-19af-4f50-88c6-5a427556df3e/error-encountered-when-creating-new-integration-services-project-0x8007007e?forum=sqlintegrationservices
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support -
ODBC error: The specified module could not be found. ?
Hi,
I have Oracle9i database installed on a test server. If I set the ODBC on the server (the TNS service name is ABCD), I can test it and run a VB application without any error. Then, I need to run the VB application on a client (Windows XP), that does not have any Oracle database installed. Following somebody's suggestion, I installed oo4o for Oracle9i which has the Universal Installer. Then, I installed the Oracle ODBC driver for Oracle9i. It looks okay because when I click Add under System DSN, it lists "Oracle in OraHome90" which is the same as I see on my oracle9i database server. However, the TNS service name is empty (on the database server, it lists ABCD). If I enter ABCD (or ABCD.xyz.com, the full global database host name)in it and run the test connection, I got: "The specified module could not be found" in OCI.DLL window. The listener.ora on the database server does show SID_LIST_LISTNER = ... (SID_NAME = ABCD).
Can somebody explain why? I definetly don't want to install the database client software on this client machine, I just want to run a VB or JAVA application on it to connect to the database server using ODBC, or something else if possible.
Any help is appreciated!
HarveyMake sure it is the same version of 9i (i.e. 9.0.x or 9.2.x) for both OO4O and ODBC. Also make sure that the ORACE_BASE\ORACLE_HOME\BIN directory is in your search path AND last, check your windows directories and subdirectories for duplicate copies of OCI.DLL (or anywhere else on the PC for that matter). Sometimes MicroSoft will include one and it is usually an OLD one.
Maybe you are looking for
-
I am about to remove 1.4 I have found that for some reason I have a number of .lrcat files on the drive, taking up some considerable amount of space. My master photos' are all safe on a drive. Can I just delete the .lrcat files and the associated fol
-
Kindle Fire HDX - Skype video calling, video is de...
When I use Skype on my Kindle Fire HDX 7" I get really good calls when it comes to audio calls. When it comes to video calling though, the sound is excllent as well as the video quality, but the video is 3-4 seconds delayed in contrast to the sound r
-
I am running http://localhost/reportserver and getting: Reporting Services Error The report server has encountered a configuration error. (rsServerConfigurationError) Get Online Help SQL Server Reporting Services What should I be looking into? Thanks
-
Image Files - Upgrade APEX (3,2 to 4.2)
I Tried posting this yesterday but maybe logged out too soon? I cant seemt o find it now. I apologize if this is out there twice now Pretty much all I have done with APEX is installed 3.2 in Banner DB about 2 years ago - our developers take it and ru
-
Hi All, I am facing an error when trying to use DBMS_JOB to run some cron jobs EXAMPLE 1 - CODE & ERRORS (Code to Run a script every day at 11 PM) variable v_jobnum NUMBER; BEGIN :v_jobnum := 1; DBMS_JOB.SUBMIT(:v_jobnum,'pp_expiry("testing");', sysd