HPLJ 4250 printing black line inch size across top of page.

HPLJ 4250 printing black line inch size across top of page. The Maintenance Kit and the toner have been changed, the option in the menu to clean fuser has also been done. The black line is intermittent so it hard to work out what to do next.

Thanks for the tip Mikey - however the same thing happens with the thin black lines when I print on 'normal' A3 paper too. On normal A4 paper it's fine, no lines, but when I print to A3 I get the lines - on both kinds of paper.
I've attached a couple of (awful-looking) scans to help illustrate my point.

Similar Messages

Thin Black Line going halfway across the top of the screen

Hi - I've exported a sequence from FCP. It's DV Pal 720x576 anamorphic 16:9 lower field dominance. I used compressor to create the mpeg 2 file for DVDSP. I used the Best Quality DVD 150 min setting. The problem I'm having is that when I export the file from DVD studio pro I get a black line going halfway across the top line of the video. I suspect it's either a deinterlacing issue or a field dominance problem. But I'm really stuck on how to sort it. Any ideas would be really appreciated. Thanks very much.

Something like this?
................................................................................ ........... (might also be mirrored horizontally)
That's the Half Line Offset and is a characteristic of interlaced video, not an issue or field dominance problem. It's quite complicated to explain and probably not surprising if you have never seen it before as it won't be visible on a regular TV set.
Short article here: http://lipas.uwasa.fi/~f76998/video/modes/ Look at the section "The "active" part of the signal". There's probably plenty more on the web, now you know what it's called.
What can you do about it? You will need to view FCP's output on an external interlaced monitor that is capable of displaying in underscan mode so you can see it.
Then you can use the crop controls to snip it off.

Black Line at the bottom of the page

Hello Everybody,
I have a strange problem, I have a pages file, and there is a black line at the end of the page and I could not delete it.
the file was .doc and i opened it by pages then saved a pages version.
what can I do to remove this strange line?
Please click the link below to download the file to find out more about the problem.
https://files.me.com/boudy83/jwzaaj.pages.zip
Any help please about this.
Thanks,
Boudy,

Go Format > Advanced > Make Master Objects Selectable
Now click on the line to the left of the footer field. You will get blue handles. Delete it!

When I print I get lines about 1 inch apart across the entire page?

When I print a photo lines come out about 1 inch across the entire page?

It is on the left side of video playback of any kind now.

Reader X prints black line across page 1

Just started using Adobe Reader X, which I really like. However, it will not print properly, and puts a couple dark black lines across the page.
Any help would be appreciated.

Use the forum for Adobe Reader.

HP Photosmart 6510 not printing black ink at all, spitting out blank pages

Hey,
My printer was working til I switched black cartridges cuz I was very low on ink and then tried to print and it won't print anything that is black or even greyscale, colors are working fine but I don't have enough color ink to print the documents I need for school. I have tried cleaning printheads multiple times, tried venting the cartridge and everything, don't know what to do, HELP !!!
This question was solved.
View Solution.

Hi @Rmrrgc
Have you completed all of the steps in the following document; Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages.
Although I hope this resolves the issue, it might not. If the issue persists, please post back with your warranty status. Use the following link to check your warranty.
If your printer is still in warranty, please call HP and explain the issue you are experiencing. The number to call HP is 1-800-474-6836 for Canada and US, or you can Contact HP Worldwide.
If your printer is out of warranty, let me know and I will do my best to help. Thanks. I look forward to hearing from you.
* Important > Please include your country/region in your next post. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

LaserJet Pro 200 color MFP M276nw prints image shifted 1/2" from top of page.

When printing any report, diagnostic or form from the machine system I get printed image shift approx. 1/2" from the top.
Is there any adjustment that can be made to the MFP to center image?

Hi @patrick22152,
I understand that when printing documents or a printer hardware self test, it shifts 1/2" from the top of the page. I can help you with this.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
It sounds like the paper isn't feeding properly. Since you are having this issue with the hardware tests and printing from the computer. If it was just the computer, I would check the paper type selected in the print driver, to make sure it isn't set on the proper paper type and not the default unspecified paper.
Try another type of paper to see if you get the same results.
I have provided a document with some steps to try to see if that will resolve the issue.
'Load Paper' Error Message Displays and the Printer Does Not Pick Up or Feed Paper.
Disregard the title.
Here is a example of how the Configuration Report should look like.
Printing a Configuration Report.
Run a cleaning page:
From the Home screen, touch the Setup button.
Touch the Service menu.
Touch the Cleaning Page button.
Load plain letter or A4 paper when you are prompted.
Touch the OK button to begin the cleaning process.
What size and kind of paper are you using?
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
How is the printer connected? (USB/Ethernet/Wireless)
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

When I try to print a web page, all I get is one line across top of page.

When I try to print a web page in Firefox, the only thing that prints is a single line across the very top of the page. I can sometimes highlight and print my selection, but now that has stopped working.

I did not have the HP printer software for Mac OSX installed properly. Once installed the problem went away.

MG 7120 won't print e-mails. Leaves blue strip across top of page.

Spoke to a Mac advisor last night for setup and thought everything was ok. Won't copy emails and there is no large box that comes up to show what you are printing or how many copies you want.

Good day.
Can try the steps in this document?
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay?javax.portlet.begCache...
Although I am an HP employee, I am speaking for myself and not for HP.
Say "Thanks" by clicking the thumbs up in the post that helped you.

When printing, the name & web address accross top of page and date at bottom are garbled, why?

I just downloaded the ff4 yesterday. When I printed pages from the web the name of the site and address that prints across the top of each page is garbled and so is the page # and date that prints across the bottom of each page. How do I correct this. I need this info. Example: printing bank balances, I can compare balances based on the date I accessed which is printed at the bottom of each page. I never had this problem with the previous version of firefox.

Does that happen on all pages or only on some?
You can try to reset the print prefs on the about:config page.<br />
* http://kb.mozillazine.org/Problems_printing_web_pages
You can open about: pages via the location bar like you open a website.

Icon size on Top Sites page

Every screen shot i've seen show the Top Sites screen showing either 3 rows of 5 or 3 rows of 4.
Mine shows 4 rows of 6 making 24.
That's way too many for me but i just cannot work out how to alter either individual size or amount of them.
Any Ideas?
Thank you

There's a choice of 6, 12 or 24 here : in Safari - Preferences - General...

When click to connect to another website I get hundreds of blank files zooming across top of page and have to quit Firefox

When I'm on certain web pages and click on a highlighted word to connect to another website, I suddenly get hundreds of blank file folders rushing across the tabs bar. I have to quit Firefox and restart. If I go back to the same page and click on the highlighted words again, the same thing happens. This event seems to be triggered most often when I'm on a company or organization's home page and I click on the highlighted words which are supposed to let me email them or get further contact info. I've reinstalled Firefox numerous times and each time I think the problem is solved, it shows up again. HELP!

See:
* [[Firefox keeps opening many tabs or windows]]

Printing from InDesign - black lines

Good afternoon all,
I've started using InDesign CS6 at work to produce advertising catalogues. I've hit a bit of a wall when I print it and would like a bit of help to try and solve my issue(s).
I have a booklet set up to print 4 pages of A4 on to double-sided A3. I printed my latest proof from InDesign this morning (just to A4)and it looked OK. I then tested it using the glossy paper we have just got today and this is when I noticed some thin black lines on the A3 print.
To help give an idea of what I'm working with, it is a catalogue/brochure with 6 or 7 product images per page, each with a price point graphic (a circle with the price in a text frame within). The price point overlaps the product image by varying degrees.
I've just checked again and the thin black lines are all on the left-hand edge of objects - both product images and price point images. I acquired the images from the DLibrary and the price point graphics came from a previous designer.
The black lines do not appear on every product image, neither do they appear on every price point. They are not all the same size (height) as the frame that they are on, if that makes sense. For instance, I have an image of a pack of coffee, and the black line starts at the top of the left-hand side and finishes about halfway down. The price point for the coffee has a black line all the way down the left-hand edge.
I have printed the catalogue to A4, it was 100% fine. I print to A3 and these lines appear. I know I could export to pdf and print from there, but that then leaves the centre spread with a white stripe down the middle and I don't have the tools or the knowledge to get rid of the borders that appear in Adobe Reader.
I've looked in the settings and can't find anything that looks like it will help. Any advice gratefully received.

Thanks for the tip Mikey - however the same thing happens with the thin black lines when I print on 'normal' A3 paper too. On normal A4 paper it's fine, no lines, but when I print to A3 I get the lines - on both kinds of paper.
I've attached a couple of (awful-looking) scans to help illustrate my point.

Black line drawings print as purple at certain areas

Hi,
We have a HP designjet 110 plus in our office as a network printer. We have been experiencing some problems when we print black line drawings. Several parts of the drawing will print as purple instead of black (meaning a line/area of shade will be partly purple and partly black). The purplish areas are pretty much consistant through a single drawing, butwill be different from drawing to drawing. I have temporarily set the printer to print with black ink only, but the printing time doubles. Is there anyway to fix this problem? Thanks.

This forum is focused on consumer level products. For the Designjet you may have better results posting in the HP Enterprise Designjet forum here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

When printing or scanning the copy prints with a black one inch wide stripe all the way down copy .

HP photosmart 2575 all-in-one, when printing or scanning the copy prints with an black one inche stripe down side of page but when i printed self-test page it printed fine

Good morning leetrout1. Lets try resetting the printer. Here is how we can do that:
Make sure the product is on, and then disconnect the power cord from the product.
Disconnect the USB cable from the product, and then disconnect it from the computer.
Reconnect the USB cable to the computer, and then reconnect it securely to the product.
Disconnect the power cord from the wall outlet, and then reconnect it to the wall outlet.
Reconnect the power cord to the product.
Press the Power button ( ) to turn on the product.
Let me know if this solves the issue. If not please be sure to post back with some more information like what operating system you are using, what applications this occurs in, etc.
Hope this helps!
-SeanS
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

HPLJ 4250 printing black line inch size across top of page.

Similar Messages

Maybe you are looking for