Hpsa is not working
Nothing about hpsa works. I've uninstalled it and reinstalled it, I've done the restore. its still not working. I've read all the forums and tried all the links and trouble shooting. Is there any one out there that actually knows how to solve this problem?
Hi, Please try these methods. Method 1: Uninstall HP Support Assistant in Control Panel, Programs and Features. Right click HP Support Assistant and select Uninstall. Restart the notebook. Next, download and install the latest version from here: http://h18021.www1.hp.com/helpandsupport/hp-self-support.html or http://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html?jumpid=ex_r602_go_hpsupportassistant&jumpid=reg_r1002_usen_c-001_title_r0005#.VLiuIXmKA5c Method 2: Troubleshooting HP Support Assistant:http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03601631&tmp_task=solveCategory&cc=us&dlc=en&jumpid=reg_r1002_usen_c-001_title_r0003&lc=en&product=6627493 ****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I am an HP Employee****
Similar Messages
-
HPSA Health Check not working in W8.1
Hi,
I am running Windows 8.1 Pro and I can not get the HPSA to download anything from the HP servers. It states that it connects but it stops at that point. I have uninstaled my current version, restarted my pc, downloaded the most current version of HPSA (7.6.31.30) and installed it, restarted my pc and am still getting the same behavior. Below is a screenshot (it looks like XP but it is 8.1). I have searched the forum for a possible solution but have had no luck.Hello @MattNC79,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how the HP Support Assistant Health Check does not work on your Windows 8.1 Pro computer, and that you have already uninstalled and re-installed the software. Since most consumer computers only come with Home editions of Windows installed, there may not be any compatible drivers for your Operating System. I would be happy to help you, but first I would encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. In addition, it will also help if you indicate whether your operating system is 32 or 64 bit. The more information you can provide, the better!
How Do I Find My Model Number or Product Number?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
Hp Pavilion Dv 9000 no audio, quick lunch soft touch not working and no light indicators
Good Evening i have problems with my laptop since it was sent to me without a hard disk drive so i have to buy a new one to make it work, first here are some useful information regarding my laptop.
Hp pavilion dv 9000
OS: Windows Vista Home premium
HDD1: 250Gb
Ram: 1030mb
so when i got the hard disk drive, i installed windows vista as its operating system and so far it worked well, and after that i downloaded drivers from HP's website, with correct laptop model and os, i searched for the most compatible drivers that will make my laptop function 100%
i installed
NVIDIA Chipset driver
Hp Quick lunch buttons
Audio Driver
so after the installation and reboot of my laptop, it seems that only NVIDIA chipset driver worked, the quick lunch buttons are still not working, and also i cannot hear anything comming out of my speaker when i try to play some music, but i hear some loud beeps so it means it is 100% functioning and also i noticed the 3 indicators at the bottom lefot of my laptop for (Power,Charging,Reading) lights are not lighting up.
i tried to uninstall it and install it again just like other blogs says but it doesnt work. . .
i really want to make my laptop fully functional . .
can you help me pleaseHello @iamDestiny ,
Welcome to the HP Forums!
I understand you've installed a new HDD in your notebook and are unable to use the keyboard shortcuts and have no sound from programs on the computer.
It would help to know if you're using a 32 or 64 bit version of Vista. To see which version of Windows you are using click here: Which Windows operating system am I running?
Keep in mind beeps typically come from the onboard BIOS speaker, not the actual speakers. Can you tell me what you do to hear the beeping so we can tell if this is a system beep or a Windows sound? Also, can you tell me if headphones work?
Regarding drivers: I would suggest installing the HP Support Assistant (HPSA) to search for drivers for you. You can download this here: HP Support Assistant. You can see how to use it here: Using HP Support Assistant (Windows 7, Windows Vista).
When you installed Vista did you use the HP recovery CD's or your own copy of Windows?
Let me know the updated info or if the HPSA works.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP. -
Auto Deploy and VCD Network Isolation - Not Working
Hello,
I have opened a support case about this issue, but the case is moving a lot slower than I would like to see. I thought I'd post here to see if anyone has ran into anything similar.
We recently switched our 24-host vCloud cluster (more info about this cluster below) over to Auto-Deploy (was using boot from USB). After the switch, we had a few complaints from customers that use isolated networks. It turns out that only 4 of our 24 hosts were working properly with isolated networks. All 24-hosts are using the same auto-deploy image.
When the hosts boot up, the vCloud Director web interface shows the following with green check marks: "Status", "Enabled", "Ready", "Available", and "VCD Network Isolation Capable".
To get my other 20 hosts working, I disabled all 20 hosts in the vCloud interface, unprepared them, and prepared them. After this, network isolation worked for those 20 hosts. When I reboot one of the hosts, the host still looks like it's good in the interface, but network isolation doesn't work until I disable, unprepare, and prepare.
Here is some more information about our environment:
vCenter build 2001466
ESXi Host Build 2702864
VCD Build 5.5.2.2000523
vShield Build 5.5.3
Here is the Deploy Rule that the hosts are using:
Name : UCS-2.2.1-pcloud.5.5.aln
PatternList : {oemstring=$SPT:ESX_PublicCloud_autod.2.2.x}
ItemList : {ESXi-5.5.0-autod-2.2.1.vshield}
I have confirmed that this is indeed the profile being used by looking at the Summary tab for the hosts and seeing the listed Image Profile.
And here is what's in that item:
PowerCLI D:\ImageBuild> Get-EsxSoftwarePackage
Name Version Vendor Creation Date
misc-cnic-register 1.72.1.v50.1i-1vmw.550.0.0.... VMware 9/19/2013 6:0...
scsi-lpfc820 8.2.3.1-129vmw.550.0.0.1331820 VMware 9/19/2013 6:0...
scsi-megaraid-mbox 2.20.5.1-6vmw.550.0.0.1331820 VMware 9/19/2013 6:0...
esx-xlibs 5.5.0-0.0.1331820 VMware 9/19/2013 6:0...
lpfc 10.0.100.1-1vmw.550.0.0.133... VMware 9/19/2013 6:0...
mtip32xx-native 3.3.4-1vmw.550.1.15.1623387 VMware 2/22/2014 1:1...
net-nx-nic 5.0.621-1vmw.550.0.0.1331820 VMware 9/19/2013 6:0...
block-cciss 3.6.14-10vmw.550.0.0.1331820 VMware 9/19/2013 6:0...
scsi-fnic 1.6.0.5-1OEM.500.0.0.472560 cisco 9/30/2013 11:...
net-enic 2.1.2.42-1OEM.500.0.0.472560 Cisco 9/5/2013 8:30...
sata-sata-sil24 1.1-1vmw.550.0.0.1331820 VMware 9/19/2013 6:0...
rste 2.0.2.0088-4vmw.550.1.15.16... VMware 2/22/2014 1:1...
elxnet 10.0.100.0v-1vmw.550.0.0.13... VMware 9/19/2013 6:0...
scsi-aacraid 1.1.5.1-9vmw.550.0.0.1331820 VMware 9/19/2013 6:0...
ata-pata-cmd64x 0.2.5-3vmw.550.0.0.1331820 VMware 9/19/2013 6:0...
net-cnic 1.72.52.v55.1-1vmw.550.0.0.... VMware 9/19/2013 6:0...
scsi-adp94xx 1.0.8.12-6vmw.550.0.0.1331820 VMware 9/19/2013 6:0...
net-be2net 4.6.100.0v-1vmw.550.0.0.133... VMware 9/19/2013 6:0...
net-ixgbe 3.7.13.7.14iov-12vmw.550.2.... VMware 4/29/2015 6:4...
net-igb 5.0.5.1.1-1vmw.550.2.54.240... VMware 1/1/2015 8:00...
epsec-mux 5.1.0-01814505 VMware 5/13/2014 4:3...
esx-base 5.5.0-2.62.2702864 VMware 4/29/2015 6:4...
ata-pata-sil680 0.4.8-3vmw.550.0.0.1331820 VMware 9/19/2013 6:0...
ipmi-ipmi-msghandler 39.1-4vmw.550.0.0.1331820 VMware 9/19/2013 6:0...
ata-pata-hpt3x2n 0.3.4-3vmw.550.0.0.1331820 VMware 9/19/2013 6:0...
scsi-megaraid-sas 5.34-9vmw.550.2.33.2068190 VMware 8/23/2014 1:5...
scsi-mptsas 4.23.01.00-9vmw.550.0.0.133... VMware 9/19/2013 6:0...
net-bnx2 2.2.3d.v55.2-1vmw.550.0.0.1... VMware 9/19/2013 6:0...
ata-pata-via 0.3.3-2vmw.550.0.0.1331820 VMware 9/19/2013 6:0...
ima-qla4xxx 2.01.31-1vmw.550.0.0.1331820 VMware 9/19/2013 6:0...
ata-pata-amd 0.3.10-3vmw.550.0.0.1331820 VMware 9/19/2013 6:0...
ata-pata-serverworks 0.4.3-3vmw.550.0.0.1331820 VMware 9/19/2013 6:0...
sata-sata-promise 2.12-3vmw.550.0.0.1331820 VMware 9/19/2013 6:0...
sata-sata-nv 3.5-4vmw.550.0.0.1331820 VMware 9/19/2013 6:0...
ipmi-ipmi-devintf 39.1-4vmw.550.0.0.1331820 VMware 9/19/2013 6:0...
scsi-ips 7.12.05-4vmw.550.0.0.1331820 VMware 9/19/2013 6:0...
sata-sata-svw 2.3-3vmw.550.0.0.1331820 VMware 9/19/2013 6:0...
scsi-mptspi 4.23.01.00-9vmw.550.0.0.133... VMware 9/19/2013 6:0...
net-e1000e 1.1.2-4vmw.550.1.15.1623387 VMware 2/22/2014 1:1...
esx-xserver 5.5.0-0.0.1331820 VMware 9/19/2013 6:0...
net-tg3 3.123c.v55.5-1vmw.550.2.33.... VMware 8/23/2014 1:5...
net-forcedeth 0.61-2vmw.550.0.0.1331820 VMware 9/19/2013 6:0...
scsi-aic79xx 3.1-5vmw.550.0.0.1331820 VMware 9/19/2013 6:0...
sata-ata-piix 2.12-10vmw.550.2.33.2068190 VMware 8/23/2014 1:5...
scsi-bnx2i 2.72.11.v55.4-1vmw.550.0.0.... VMware 9/19/2013 6:0...
ohci-usb-ohci 1.0-3vmw.550.0.0.1331820 VMware 9/19/2013 6:0...
scsi-qla4xxx 5.01.03.2-6vmw.550.0.0.1331820 VMware 9/19/2013 6:0...
scsi-qla2xxx 902.k1.1-9vmw.550.0.0.1331820 VMware 9/19/2013 6:0...
net-mlx4-core 1.9.7.0-1vmw.550.0.0.1331820 VMware 9/19/2013 6:0...
ata-pata-atiixp 0.4.6-4vmw.550.0.0.1331820 VMware 9/19/2013 6:0...
misc-drivers 5.5.0-2.62.2702864 VMware 4/29/2015 6:4...
esx-dvfilter-generic-... 5.5.0-0.0.1331820 VMware 9/19/2013 6:0...
ata-pata-pdc2027x 1.0-3vmw.550.0.0.1331820 VMware 9/19/2013 6:0...
qlnativefc 1.0.12.0-1vmw.550.0.0.1331820 VMware 9/19/2013 6:0...
lsi-mr3 0.255.03.01-2vmw.550.1.16.1... VMware 4/15/2014 9:0...
vshield 5.5.3-2172759 VMware 9/30/2014 2:3...
net-vmxnet3 1.1.3.0-3vmw.550.2.39.2143827 VMware 9/18/2014 11:...
scsi-hpsa 5.5.0-44vmw.550.0.0.1331820 VMware 9/19/2013 6:0...
tools-light 5.5.0-2.62.2702864 VMware 4/29/2015 6:4...
scsi-mpt2sas 14.00.00.00-3vmw.550.1.15.1... VMware 2/22/2014 1:1...
scsi-bnx2fc 1.72.53.v55.1-1vmw.550.0.0.... VMware 9/19/2013 6:0...
lsi-msgpt3 00.255.03.03-1vmw.550.1.15.... VMware 2/22/2014 1:1...
net-e1000 8.0.3.1-3vmw.550.0.0.1331820 VMware 9/19/2013 6:0...
xhci-xhci 1.0-2vmw.550.2.39.2143827 VMware 9/18/2014 11:...
ipmi-ipmi-si-drv 39.1-4vmw.550.0.0.1331820 VMware 9/19/2013 6:0...
sata-ahci 3.0-21vmw.550.2.54.2403361 VMware 1/1/2015 8:00...
net-bnx2x 1.72.56.v55.2-1vmw.550.0.0.... VMware 9/19/2013 6:0...
scsi-megaraid2 2.00.4-9vmw.550.0.0.1331820 VMware 9/19/2013 6:0...
ehci-ehci-hcd 1.0-3vmw.550.0.0.1331820 VMware 9/19/2013 6:0...
esx-tboot 5.5.0-2.33.2068190 VMware 8/23/2014 1:5...
uhci-usb-uhci 1.0-3vmw.550.0.0.1331820 VMware 9/19/2013 6:0...
sata-sata-sil 2.3-4vmw.550.0.0.1331820 VMware 9/19/2013 6:0...
vcloud-agent 5.5.0-1280396 VMware 8/17/2013 4:0...
net-mlx4-en 1.9.7.0-1vmw.550.0.0.1331820 VMware 9/19/2013 6:0...
And here is the output of testing the deploy rule compliance:
PowerCLI D:\ImageBuild> Get-Cluster 0000000-ESXVCLOUDCL1.ALN | Get-VMHost |Test-
DeployRuleSetCompliance
VMHost ItemList
esx142269.vm.seo.... {}
esx140622.vm.seo.... {}
esx139784.vm.seo.... {}
esx140617.vm.seo.... {}
esx138793.vm.seo.... {}
esx135523.vm.seo.... {}
esx138945.vm.seo.... {}
esx138794.vm.seo.... {}
esx139783.vm.seo.... {}
esx140309.vm.seo.... {}
esx140310.vm.seo.... {}
esx140311.vm.seo.... {}
esx140313.vm.seo.... {}
esx140339.vm.seo.... {}
esx140614.vm.seo.... {}
esx140615.vm.seo.... {}
esx140616.vm.seo.... {}
esx140618.vm.seo.... {}
esx140619.vm.seo.... {}
esx140621.vm.seo.... {}
esx141947.vm.seo.... {}
esx141945.vm.seo.... {}
esx142271.vm.seo.... {}
esx142270.vm.seo.... {}
Here is another vib list from a host:
~ # esxcli software vib list
Name Version Vendor Acceptance Level Install Date
net-enic 2.1.2.42-1OEM.500.0.0.472560 Cisco VMwareCertified -
ata-pata-amd 0.3.10-3vmw.550.0.0.1331820 VMware VMwareCertified -
ata-pata-atiixp 0.4.6-4vmw.550.0.0.1331820 VMware VMwareCertified -
ata-pata-cmd64x 0.2.5-3vmw.550.0.0.1331820 VMware VMwareCertified -
ata-pata-hpt3x2n 0.3.4-3vmw.550.0.0.1331820 VMware VMwareCertified -
ata-pata-pdc2027x 1.0-3vmw.550.0.0.1331820 VMware VMwareCertified -
ata-pata-serverworks 0.4.3-3vmw.550.0.0.1331820 VMware VMwareCertified -
ata-pata-sil680 0.4.8-3vmw.550.0.0.1331820 VMware VMwareCertified -
ata-pata-via 0.3.3-2vmw.550.0.0.1331820 VMware VMwareCertified -
block-cciss 3.6.14-10vmw.550.0.0.1331820 VMware VMwareCertified -
ehci-ehci-hcd 1.0-3vmw.550.0.0.1331820 VMware VMwareCertified -
elxnet 10.0.100.0v-1vmw.550.0.0.1331820 VMware VMwareCertified -
epsec-mux 5.1.0-01814505 VMware VMwareCertified -
esx-base 5.5.0-2.62.2702864 VMware VMwareCertified -
esx-dvfilter-generic-fastpath 5.5.0-0.0.1331820 VMware VMwareCertified -
esx-tboot 5.5.0-2.33.2068190 VMware VMwareCertified -
esx-xlibs 5.5.0-0.0.1331820 VMware VMwareCertified -
esx-xserver 5.5.0-0.0.1331820 VMware VMwareCertified -
ima-qla4xxx 2.01.31-1vmw.550.0.0.1331820 VMware VMwareCertified -
ipmi-ipmi-devintf 39.1-4vmw.550.0.0.1331820 VMware VMwareCertified -
ipmi-ipmi-msghandler 39.1-4vmw.550.0.0.1331820 VMware VMwareCertified -
ipmi-ipmi-si-drv 39.1-4vmw.550.0.0.1331820 VMware VMwareCertified -
lpfc 10.0.100.1-1vmw.550.0.0.1331820 VMware VMwareCertified -
lsi-mr3 0.255.03.01-2vmw.550.1.16.1746018 VMware VMwareCertified -
lsi-msgpt3 00.255.03.03-1vmw.550.1.15.1623387 VMware VMwareCertified -
misc-cnic-register 1.72.1.v50.1i-1vmw.550.0.0.1331820 VMware VMwareCertified -
misc-drivers 5.5.0-2.62.2702864 VMware VMwareCertified -
mtip32xx-native 3.3.4-1vmw.550.1.15.1623387 VMware VMwareCertified -
net-be2net 4.6.100.0v-1vmw.550.0.0.1331820 VMware VMwareCertified -
net-bnx2 2.2.3d.v55.2-1vmw.550.0.0.1331820 VMware VMwareCertified -
net-bnx2x 1.72.56.v55.2-1vmw.550.0.0.1331820 VMware VMwareCertified -
net-cnic 1.72.52.v55.1-1vmw.550.0.0.1331820 VMware VMwareCertified -
net-e1000 8.0.3.1-3vmw.550.0.0.1331820 VMware VMwareCertified -
net-e1000e 1.1.2-4vmw.550.1.15.1623387 VMware VMwareCertified -
net-forcedeth 0.61-2vmw.550.0.0.1331820 VMware VMwareCertified -
net-igb 5.0.5.1.1-1vmw.550.2.54.2403361 VMware VMwareCertified -
net-ixgbe 3.7.13.7.14iov-12vmw.550.2.62.2702864 VMware VMwareCertified -
net-mlx4-core 1.9.7.0-1vmw.550.0.0.1331820 VMware VMwareCertified -
net-mlx4-en 1.9.7.0-1vmw.550.0.0.1331820 VMware VMwareCertified -
net-nx-nic 5.0.621-1vmw.550.0.0.1331820 VMware VMwareCertified -
net-tg3 3.123c.v55.5-1vmw.550.2.33.2068190 VMware VMwareCertified -
net-vmxnet3 1.1.3.0-3vmw.550.2.39.2143827 VMware VMwareCertified -
ohci-usb-ohci 1.0-3vmw.550.0.0.1331820 VMware VMwareCertified -
qlnativefc 1.0.12.0-1vmw.550.0.0.1331820 VMware VMwareCertified -
rste 2.0.2.0088-4vmw.550.1.15.1623387 VMware VMwareCertified -
sata-ahci 3.0-21vmw.550.2.54.2403361 VMware VMwareCertified -
sata-ata-piix 2.12-10vmw.550.2.33.2068190 VMware VMwareCertified -
sata-sata-nv 3.5-4vmw.550.0.0.1331820 VMware VMwareCertified -
sata-sata-promise 2.12-3vmw.550.0.0.1331820 VMware VMwareCertified -
sata-sata-sil24 1.1-1vmw.550.0.0.1331820 VMware VMwareCertified -
sata-sata-sil 2.3-4vmw.550.0.0.1331820 VMware VMwareCertified -
sata-sata-svw 2.3-3vmw.550.0.0.1331820 VMware VMwareCertified -
scsi-aacraid 1.1.5.1-9vmw.550.0.0.1331820 VMware VMwareCertified -
scsi-adp94xx 1.0.8.12-6vmw.550.0.0.1331820 VMware VMwareCertified -
scsi-aic79xx 3.1-5vmw.550.0.0.1331820 VMware VMwareCertified -
scsi-bnx2fc 1.72.53.v55.1-1vmw.550.0.0.1331820 VMware VMwareCertified -
scsi-bnx2i 2.72.11.v55.4-1vmw.550.0.0.1331820 VMware VMwareCertified -
scsi-hpsa 5.5.0-44vmw.550.0.0.1331820 VMware VMwareCertified -
scsi-ips 7.12.05-4vmw.550.0.0.1331820 VMware VMwareCertified -
scsi-lpfc820 8.2.3.1-129vmw.550.0.0.1331820 VMware VMwareCertified -
scsi-megaraid-mbox 2.20.5.1-6vmw.550.0.0.1331820 VMware VMwareCertified -
scsi-megaraid-sas 5.34-9vmw.550.2.33.2068190 VMware VMwareCertified -
scsi-megaraid2 2.00.4-9vmw.550.0.0.1331820 VMware VMwareCertified -
scsi-mpt2sas 14.00.00.00-3vmw.550.1.15.1623387 VMware VMwareCertified -
scsi-mptsas 4.23.01.00-9vmw.550.0.0.1331820 VMware VMwareCertified -
scsi-mptspi 4.23.01.00-9vmw.550.0.0.1331820 VMware VMwareCertified -
scsi-qla2xxx 902.k1.1-9vmw.550.0.0.1331820 VMware VMwareCertified -
scsi-qla4xxx 5.01.03.2-6vmw.550.0.0.1331820 VMware VMwareCertified -
uhci-usb-uhci 1.0-3vmw.550.0.0.1331820 VMware VMwareCertified -
vcloud-agent 5.5.0-1280396 VMware VMwareCertified -
vmware-fdm 5.5.0-2001466 VMware VMwareCertified -
vshield 5.5.3-2172759 VMware VMwareCertified -
xhci-xhci 1.0-2vmw.550.2.39.2143827 VMware VMwareCertified -
tools-light 5.5.0-2.62.2702864 VMware VMwareCertified -
scsi-fnic 1.6.0.5-1OEM.500.0.0.472560 cisco VMwareCertified -
Any help is appreciated. Thanks.Right now, on my test host (that is not working), I have two VMs, one named "Test 1" and the other "Test 2" They only have an isolated network on them (named "Test Isolated Network") that is in my VDC, and pings do not work between them. If I move them to any other host (that have been unprepared and prepared), pings work. I can move both to the same host, or different hosts.
Here is the fence info on this host, I'm not really sure how to interpret this:
~ # esxcli vcloud fence getfenceinfo
Module Parameters:
Host Key: 0x104b0
Configured LAN MTUs:
+------------------------------------------------------------------------------------------+
| LAN ID | 1 2 3 4 5 6 7 8 9 10 - - - - - - |
| MTU | 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 - - - - - - |
+------------------------------------------------------------------------------------------+
Active Ports:
+-----------------------------------------+
| ID | OPI | LanID | MTU |
+-----------------------------------------+
| 410b1d4ce7d0 | 01,0001a2 | 4 | 1500 |
| 410b1d4cfde0 | 01,0001a2 | 4 | 1500 |
+-----------------------------------------+
Switch State:
+-----------------------------------------------------+
| Inner MAC | Outer MAC | used | age | seen |
+-----------------------------------------------------+
+ ............................... Port:0x410b1d4ce7d0 +
+-----------------------------------------------------+
+ ............................... Port:0x410b1d4cfde0 +
| 00:50:56:01:06:16 | 00:13:F5:01:04:B4 | 1 | 1 | 1 |
+-----------------------------------------------------+
Port Statistics Summary:
+-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| Identity | To VM dropped | To VM passed | From VM dropped | From VM passed | Reflect |
| Port ID | Fence ID | total | misunf | misfen | stored | frag | other | fenced | join | unfen | csum | frag | GVT | other | fenced | tso | frag | csum | GVT | ufport | pass | error |
+-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| 410b1d4ce7d0 | 01,0001a2 | 3991 | 2 | 3976 | 0 | 0 | 0 | 13 | 0 | 0 | 0 | 0 | 0 | 0 | 679 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
+-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| 410b1d4cfde0 | 01,0001a2 | 4478 | 2 | 3860 | 0 | 0 | 0 | 616 | 0 | 0 | 0 | 0 | 0 | 0 | 626 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
+-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
And here is the output of the command a little while later on the same host (while my test pings are going)
~ # esxcli vcloud fence getfenceinfo
Module Parameters:
Host Key: 0x104b0
Configured LAN MTUs:
+------------------------------------------------------------------------------------------+
| LAN ID | 1 2 3 4 5 6 7 8 9 10 - - - - - - |
| MTU | 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 - - - - - - |
+------------------------------------------------------------------------------------------+
Active Ports:
+-----------------------------------------+
| ID | OPI | LanID | MTU |
+-----------------------------------------+
| 410b1d4ce7d0 | 01,0001a2 | 4 | 1500 |
| 410b1d4cfde0 | 01,0001a2 | 4 | 1500 |
+-----------------------------------------+
Switch State:
+-----------------------------------------------------+
| Inner MAC | Outer MAC | used | age | seen |
+-----------------------------------------------------+
+ ............................... Port:0x410b1d4ce7d0 +
+-----------------------------------------------------+
+ ............................... Port:0x410b1d4cfde0 +
| 00:50:56:01:06:16 | 00:13:F5:01:04:B4 | 1 | 1 | 1 |
+-----------------------------------------------------+
Port Statistics Summary:
+-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| Identity | To VM dropped | To VM passed | From VM dropped | From VM passed | Reflect |
| Port ID | Fence ID | total | misunf | misfen | stored | frag | other | fenced | join | unfen | csum | frag | GVT | other | fenced | tso | frag | csum | GVT | ufport | pass | error |
+-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| 410b1d4ce7d0 | 01,0001a2 | 4696 | 2 | 4681 | 0 | 0 | 0 | 13 | 0 | 0 | 0 | 0 | 0 | 0 | 796 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
+-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| 410b1d4cfde0 | 01,0001a2 | 5300 | 2 | 4565 | 0 | 0 | 0 | 733 | 0 | 0 | 0 | 0 | 0 | 0 | 743 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
+-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
Looking at the VDS, the Maximum MTU is set to 1500. Looking at dvs.VCDVSTest Isolated Network-ca9a45c9-1dec-4f95-8b96-68d9c05b2a5d, I see it's VLAN is set to 2535 (which matches the network pool settings) and number of ports is 16 -
Running win7 on desktop PC...notification HPASL not working
I have been having several issues with my PC and my troubleshooting steps always takes me back to running HPASL but it's not working. How can I fix this in order to see if this HPASL can correct my other issues. Thank you
i am having this same issue. hpasl not working. i uninstalled hpsa and reinstalled hpsa and that did not resolve the issue. i do not know how to remove hpasl before reinstalling and when i tried to reinstall from the link below, it said that i had a newer version. how do i uninstall hpasl and find the latest version to reinstall?
thanks for you help! -
Volume control on keyboard not working?
I have an HP Pavillion dv7-3165dx Entertainment Notebook. The volume control on the keyboard is not working anymore. How do I turn it back on?
Hi,
Try downloading and installing the latest driver from HP on the link below - this may be the same one applied by HPSA, but try installing it again.
ftp://ftp.hp.com/pub/softpaq/sp52501-53000/sp52790.exe
After the installation has completed, restart the notebook.
If the above fails to solve the issue, try reinstalling Quick Launch Buttons from the installer on the following link.
ftp://ftp.hp.com/pub/softpaq/sp53001-53500/sp53135.exe
Again, restart after the installation has completed.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Not work tablet UI on Prestigio 5080 PRO tablet
I read that browser.ui.layout.tablet = "1" can fix this problem. But it not works. I can work only in pnone interface that is not good for my 8'' tablet.
Would it be possible for you to share the problematic pdf and OS information with us at [email protected] so that we may investigate?
Thanks,
Adobe Reader Team -
Why self-defined access sequences of free goods can not work?
Hi gurus,
I have maintained access sequences of free goods self-defined.but when i creat the SO it does not work!
when i used the standard access sequences ,it is OK .
Can anybody tell me why?
thanks in advanceDear Sandy,
Go to V/N1 transaction select your self defined access sequence then go in to the accesses and fields and check all fields are activated.
Make sure that these fields are flowing in your sales order.
I hope this will help you,
Regards,
Murali. -
Adobe bridge raw not working with windows vista in photoshop cc, why?
adobe bridge raw not working in photoshop cc, is there a fix?
Your sure your using photoshop cc on windows vista?
I was under the impression that photoshop cc would not even install on windows vista.
What version of camera raw do you have?
In photoshop under Help>About Plugin does it list Camera Raw and if so which version is it?
(click on the words Camera Raw to see the version)
Camera raw doesn't work if it's a camera raw file or some other file type such as jpeg or tif?
What camera are the camera raw files from?
Officially camera raw 8.3 is the latest version of camera raw that will work on windows vista. -
Adobe Bridge CS5 in windows 7 not working?
Adobe Bridge CS5 in windows 7 not working. I was using bridge perfectly for last 2 years. It stops working since 3 days. I tried to install updates. Showing some error to install.
Tried to install creative cloud..again some error. Error code : 82
Could you please advice how I can fix my adobe bridge.https://www.youtube.com/watch?v=xDYpTOoV81Q&feature=youtu.be
please check this video I uploaded..this is what happens when I click adobe bridge.. just blinks and go off. bridge not working on task manager -
ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW
ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW
BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html -
Partner application logoff not working
We have a partner application registered with sso with custom login screen. The login works fine. We use the following code to logoff the partner application in logoff.jsp
response.setHeader("Osso-Return-Url", "http://my.oracle.com" );
response.sendError(470, "Oracle SSO");
session.invalidate();
but the logoff is not working properly. It is not invalidating the session and the logout http request is not going from the application server to the sso server.
Are there any additional configurations for SSO logoff.Any help is appreciated.
ThanksHi
The WF should also trigger if i add the Partner function in UI.If i change any Attribute the WF triggers but i dont want to change the attribute when i add the partner function.
If i have only one event for WF that is Partner Change the WF will not trigger it for the 1st time when i save the UI. But next i come to the same saved doc and add a partner function then the Wf triggers.
So this means that Partner change is active.
the issue here is i need to trigger the WF on , the 1st time i save the UI, for which i wil be using Attribute Change and next time when i come back to saved doc the and add only the partner function and no changes are made to attributes the WF should again trigger.
Thanks
Tarmeem -
IPhone 4 Voice Memos not working/saving
Hi there,
I'm having trouble with my voice memos too. Up until yesterday they were working fine and now, even though the record button works, the stop button does not and I can only pause them. Worse again is that the button to go into the menu to view all voice memos is not working so I can't play them from my iPhone and nothing new is saving to my iTunes. Please help!I've always had the "Include Voice Memos" option selected. I think that only pertains to syncing voice memos from iTunes to the iPhone after it has been copied to iTunes. It has to be the new OS/iTunes not communicating that new memos have been recorded. For some reason they won't sync when I want them to, and then a few syncs later they magically appear.
By the way, I'm VERY comfortable with the iTunes and iPhone systems. I've been using iTunes for 5 years, and I've been recording class lectures with the iPhone voice memo app (and another app) for a couple years. It's not an error of not seeing that the memos were added; they don't exist in my library or music folders.
JUST OUT OF CURIOSITY, POST WHICH FIRMWARE YOU ARE RUNNING EXACTLY!!!
I'm on an iPhone 4, running firmware 4.0.1 -
Installed Premiere Pro CS4 but video display does not work?
I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
RonI would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2 -
Ideapad A1-07 tablet wifi-bluet​ooth does not work!
Hello everyone. As you can see from the title on my tablet is not working wifi and bluetooth. When turning wifi tablet is reset and continues to be off and on until it forcibly turns off, and when you turn it on again, and do not touch wifi everything is normal and there are no problems with resetting. Can someone help me and give suggestion to solve this stupid problem. I'm from Croatia and I'm bad with the English writing.
Hi
Welcome To Lenovo Community
Please perform a factory reset
Please ensure you have backed any important data before doing factory reset
Hold the volume down and the power till Lenovo logo appears .
System will boot into recover mode. Follow the instructions
Hope This Helps
Cheers!!!
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with Kudos!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!
Maybe you are looking for
-
Deactivate an Enhancement to a standard program
Dear all, I'm facing the following problem. Our programmer apply an Enhancement to to a standard FI program. Now I would to deactivete this Enhancement: what is the t-code that allow me to do this? Sap Version: ECC 6.0 Thanks in advance Alberto
-
Problem in OIM Installation in Linux-64 bit environment
Hi, Components used 1. Oracle Database11gR1 2. Weblogic Application server 10.3.0(installed in non clustered mode) 3. OIM 9.1.0.1 Also ensured the above three are compatible. I'm facing problem at the end of OIM installation in RedHat Linux-64 bit en
-
since updating to latest update touch screen has gone crazy with a box appearing around apps and cant move around by touching creen as before,plus i cant slide from screen to screen due to square box around apps.
-
Cant create smooth angled lines
im needing to create a fairly simple graphic of a plain rectangle with an arrow on one side. the rectangle looks fine, 1 pixel border, but the arrow looks badly jagged in all browsers. ive tried 2 lines angled, the arrow shape and a triangle, slightl
-
Kapsel - Unauthorized Errors in Log
I'm seeing the following error in the SMP logs for my Kapsel application: 2014-08-18 10:27:11.311#DEBUG#SMPCorrelatedLoggingHandler#null#GET 2014-08-18 10:27:11.312#DEBUG#SMPApplicationSettingsHandler#null#Retrieve Application Connection Id [aaf8f072