HPStatusBL.dll module could not be found

Before I installed my new HP printer, I uninstalled my HP Deskjet 3050A J611 series printer through Windows 7 uninstall program. Now everytime I boot up I get the following message:"There was a problem starting C:\Program Files\HP\HP Deskjet 3050A J611 series\bin\HPStatusBL.dll. The specified module could not be found."This does not affect the behavior of my computer, nor does it affect the working of my new HP printer. But I can't figure out how to get rid of this message.Help!Thank you to anyone who can help me. 

Intruderscooter wrote:
After exhaustive research...this is the HP Monitor Ink status dll. It is heavily embedded in the computer and is not so straightforward to locate. Here is the path I took: MSConfig / Startup / Monitor Ink - this tells you where the .dll is locatedwithin your system. Follow that specific path and then delete the file. For example, for me it was one of the two paths below (can't remember which of the two now) but as long as you start with MSConfig / Startup it will get you there. You may also want to ensure that it is not running as a Service within MSConfig under the same name (Monitor Ink)Again, mine was embedded under one of these paths (as an example):
C: Windows / Users / (your name) / Roaming / Startup / Monitor Ink shortcut (delete this)e     or...
C:Windows / Users / (your name) / Roaming / Application Date / Startup / Monitor ink shortcut (delete this)
Like I said, it is heavily embedded and each user configuration may be a bit different so start by finding the path within MSConfig / Startup / Monitor Ink.  Hover over the location and it will identify the exact path.I would like to thank you for solving my "RunDLL Error" problem, I used your information and now the error is fixed.Thank You, Thank You, Thank you.  P.S.   Thank You. I wish you a great and wonderful healthy life.

Similar Messages

  • Vedrsioncue.dll Module Could Not Be Found

    I have been running Adobe "eLearning Suite" for over a year and have in the past week encountrered "Specified Module could not be found C:Program Files\Common Files\Adobe\Adobe cs4\Client\4.01\versioncue.dll
    Running 64 bit in Windows 7 -- Error message comes up in almost all programs when I right click and on some programs when I try to run them. I am frustrated.

    Sounds like you deleted, or failed to copy, many of the support files used by Adobe applications.
    Reinstalling the applications is your best bet.

  • Users\tc\AppData\Roaming\sp.DLL, module could not be found

    can anyone really give me some good advise on how to fix this error?
    I greatly appreciate it...

    What I would do if I encountered that situation:
    check the computer for malware;
    use a program like CCleaner (Tools | Startup) to see what could possibly try to invoke that non-existant dll file.

  • System.DllNotFoundException: Unable to load DLL 'OraOps10.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E)

    Hi,
    I have a asp.net web application running on windows server 2008 with oracle server 10g installed.
    now we are planning to run application on another server with same server as database server. but when the deployed on new server the login page comes up and after login System.DllNotFoundException: Unable to load DLL 'OraOps10.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E) exception is thrown. any help would highly be appreciated.

    Did you run the ODAC installer, OUI or xcopy, or did you just copy over Oracle.DataAccess.dll to the new machine? If the latter, then you need to run the installer to put in all the necessary Oracle DLLs ODP.NET references.

  • Error :the specified module could not be found --oci.dll  : Oracle9i

    hi ,
    i m trying to connect thru my java code to the oracle on my system ,while creating the DSN it gives the error
    "the specified module could not be found" for the file oci.dll.
    earlier it was not able to look for the sqresus.dll which i copied to the winnt/system directory , and after this oci error is coming , anyone knowing it please guide
    with regards,

    Make sure it is the same version of 9i (i.e. 9.0.x or 9.2.x) for both OO4O and ODBC. Also make sure that the ORACE_BASE\ORACLE_HOME\BIN directory is in your search path AND last, check your windows directories and subdirectories for duplicate copies of OCI.DLL (or anywhere else on the PC for that matter). Sometimes MicroSoft will include one and it is usually an OLD one.

  • Error messages:  "itunesobjspl/jenetsvc.dll The specified module could not be found."  And Error -2032  "Quicktime failed to initialize."

    I initially got the Error -2032 message after downloading the newest version of itunes.  I read a geek blog that said to uninstall Quicktime and I did that a bunch of times.  I also uninstalled and reinstalled itunes repeatedly.  None of this works.  I noticed that the apple website said the requirements for the new quicktime/itunes download included an intel processor and I have a celeron processor, so I wondered if that was the problem, although everything has been running fine up until now, so I don't know.  It also doesn't address the missing .dll file, but I may have accidentally deleted that because I went into the registry to try and unload some Quicktime files when I uninstalled Quicktime.  I did this at the suggestion of the blog, but I may have screwed it up.  Now I need to repair the missing .dll and still try to get itunes running

     ErikEJ wrote:
    Have you set your solution target to "Any CPU" ?? If so, set to "x86", as SQL Compact only runs in WoW mode on x64. Or use corflags.exe /32BIT+ against your project output (.exe file).
     ErikEJ wrote:
    Look at this blog post for a walk-through: http://erikej.blogspot.com/2008/01/x64-and-sql-compact.html
    Hello everyone,
    I have the same problem as mentioned above "Unable to load DLL 'elev.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E) ", when trying to load the dll file into a window application.  I developed a window application in VS2005 and want to import a dll file from another program into my project and use it.  But when I try to call one of the function in the dll file, I got the error message "Unable to load dll 'elev.dll".  I try all options that say it works to solve this problem, but somehow it doesn't work for me. I put the "elev.dll" file in the bin folder and use P/Invoke to import the dll file into my project.  Can anyone help me out with this?  thanks and really appreciated!
     Here is how I import the dll:
    [DllImport(@"D:\elev.dll")]
    //[DllImport("emap.dll", SetLastError = true)]
    private static extern void EMA_Init();
    and in the code,  I call the function above but failed to load the dll file
    EMA_Init();

  • Dboraslib.dll - Error 126 : "The specified module could not be found."

    Hi,
    After installation XI 3.0 and adapters, the dispatcher(dispwork.exe) is failing to start in a ABAPJ2EE system (web AS 6.40).
    The dev_disp trace file shows the following error:
    Please do help to resolve this problem.
    trc file: "dev_disp", trc level: 1, release: "640"
    Mon Aug 09 12:14:43 2004
    kernel runs with dp version 124000(ext=101000) (@(#) DPLIB-INT-VERSION-124000-UC)
    length of sys_adm_ext is 524 bytes
    ERROR => DlLoadLib: LoadLibrary(dboraslib.dll) Error 126 [dlnt.c       237]
            Error 126 = "The specified module could not be found."
    systemid   560 (PC with Windows NT)
    relno      6400
    patchlevel 0
    patchno    1
    intno      0
    make:      multithreaded, Unicode
    pid        2908
    ***LOG Q00=> DpSapEnvInit, DPStart (00 2908) [dpxxdisp.c   1093]
         shared lib "dw_xml.dll" version 1 successfully loaded
         shared lib "dw_xtc.dll" version 1 successfully loaded
         shared lib "dw_stl.dll" version 1 successfully loaded
         shared lib "dw_gui.dll" version 1 successfully loaded
    Mon Aug 09 12:14:48 2004
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  3878]
    MtxInit: -2 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: JAVA is not active
    DpShMCreate: sizeof(wp_adm)          10528     (1316)
    DpShMCreate: sizeof(tm_adm)          2506872     (12472)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpShMCreate: sizeof(comm_adm)          290000     (580)
    DpShMCreate: sizeof(vmc_adm)          0     (372)
    DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 06440040, size: 2919328)
    DpShMCreate: allocated sys_adm at 06440040
    DpShMCreate: allocated wp_adm at 06441B58
    DpShMCreate: allocated tm_adm_list at 06444478
    DpShMCreate: allocated tm_adm at 064444A0
    DpShMCreate: allocated wp_ca_adm at 066A8518
    DpShMCreate: allocated appc_ca_adm at 066AE2D8
    DpShMCreate: allocated comm_adm_list at 066B0218
    DpShMCreate: allocated comm_adm at 066B0230
    DpShMCreate: allocated vmc_adm_list at 066F6F00
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 066F6F28
    DpShMCreate: allocated wall_adm at 066F6F30
    MBUF state OFF
    Mon Aug 09 12:14:49 2004
    EmInit: MmSetImplementation( 2 ).
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation std
    <EsNT> Memory Reset enabled as NT default
    <EsNT> EsIUnamFileMapInit: Initialize the memory 614 MB
    <ES> 613 blocks reserved for free list.
    ES initialized.
    Mon Aug 09 12:14:52 2004
    J2EE server info
      start = TRUE
      state = STARTED
      pid = 3216
      argv[0] = C:\usr\sap\SXI\DVEBMGS00/j2ee/os_libs/jcontrol.exe
      argv[1] = C:\usr\sap\SXI\DVEBMGS00/j2ee/os_libs/jcontrol.exe
      argv[2] = pf=C:\usr\sap\SXI\SYS\profile\SXI_DVEBMGS00_cgnlpt036
      argv[3] = -DSAPSTART=1
      argv[4] = -DCONNECT_PORT=1352
      argv[5] = -DLISTEN_PORT=1353
      argv[6] = -DSAPSYSTEM=00
      argv[7] = -DSAPSYSTEMNAME=SXI
      argv[8] = -DSAPMYNAME=cgnlpt036_SXI_00
      argv[9] = -DSAPPROFILE=C:\usr\sap\SXI\SYS\profile\SXI_DVEBMGS00_cgnlpt036
      argv[10] = -DFRFC_FALLBACK=ON
      argv[11] = -DFRFC_FALLBACK_HOST=localhost
      start_lazy = 0
      start_control = SAP J2EE startup framework
    DpJ2eeStart: j2ee state = STARTED
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 2.0 2.0 3.1.1) [dpxxdisp.c   1455]
    ***LOG Q0K=> DpMsAttach, mscon ( cgnlpt036) [dpxxdisp.c   9701]
    Mon Aug 09 12:14:54 2004
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 6400, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1025]
    DpMsgAdmin: Set patchno for this platform to 1
    Release check o.K.
    Mon Aug 09 12:15:33 2004
    ERROR => W0 (pid 3224) died [dpxxdisp.c   12152]
    ERROR => W1 (pid 3232) died [dpxxdisp.c   12152]
    my types changed after wp death/restart 0xbf --> 0xbe
    ERROR => W2 (pid 3240) died [dpxxdisp.c   12152]
    my types changed after wp death/restart 0xbe --> 0xbc
    ERROR => W3 (pid 3248) died [dpxxdisp.c   12152]
    my types changed after wp death/restart 0xbc --> 0xb8
    ERROR => W4 (pid 3256) died [dpxxdisp.c   12152]
    ERROR => W5 (pid 3264) died [dpxxdisp.c   12152]
    my types changed after wp death/restart 0xb8 --> 0xb0
    ERROR => W6 (pid 3272) died [dpxxdisp.c   12152]
    my types changed after wp death/restart 0xb0 --> 0xa0
    ERROR => W7 (pid 3280) died [dpxxdisp.c   12152]
    my types changed after wp death/restart 0xa0 --> 0x80
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    killing W0-3224 (SIGUSR2)
    ERROR => DpWpKill(3224, SIGUSR2) failed [dpxxtool.c   2464]
    killing W1-3232 (SIGUSR2)
    ERROR => DpWpKill(3232, SIGUSR2) failed [dpxxtool.c   2464]
    killing W2-3240 (SIGUSR2)
    ERROR => DpWpKill(3240, SIGUSR2) failed [dpxxtool.c   2464]
    killing W3-3248 (SIGUSR2)
    ERROR => DpWpKill(3248, SIGUSR2) failed [dpxxtool.c   2464]
    killing W4-3256 (SIGUSR2)
    ERROR => DpWpKill(3256, SIGUSR2) failed [dpxxtool.c   2464]
    killing W5-3264 (SIGUSR2)
    ERROR => DpWpKill(3264, SIGUSR2) failed [dpxxtool.c   2464]
    killing W6-3272 (SIGUSR2)
    ERROR => DpWpKill(3272, SIGUSR2) failed [dpxxtool.c   2464]
    killing W7-3280 (SIGUSR2)
    ERROR => DpWpKill(3280, SIGUSR2) failed [dpxxtool.c   2464]
    NiWait: sleep (10000 msecs) ...
    NiISelect: timeout 10000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:43 2004
    NiISelect: TIMEOUT occured (10000 ms)
    dump system status
    Workprocess Table (long)               Mon Aug 09 06:45:43 2004
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program  Cl  User         Action                    Table
    0 DIA     3224 Ended         no      1   0             0                                                             
    1 DIA     3232 Ended         no      1   0             0                                                             
    2 UPD     3240 Ended         no      1   0             0                                                             
    3 ENQ     3248 Ended         no      1   0             0                                                             
    4 BTC     3256 Ended         no      1   0             0                                                             
    5 BTC     3264 Ended         no      1   0             0                                                             
    6 SPO     3272 Ended         no      1   0             0                                                             
    7 UP2     3280 Ended         no      1   0             0                                                             
    Dispatcher Queue Statistics               Mon Aug 09 06:45:43 2004
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    3
    2000
    10
    10
    --------++++--
    +
    DIA
    5
    5
    2000
    5
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          13
    wake_evt_udp_now     0
    wake events           total     9,  udp     6 ( 66%),  shm     3 ( 33%)
    since last update     total     9,  udp     6 ( 66%),  shm     3 ( 33%)
    Dump of tm_adm structure:               Mon Aug 09 06:45:43 2004
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Mon Aug 09 06:45:43 2004
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    NiWait: sleep (5000 msecs) ...
    NiISelect: timeout 5000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:48 2004
    NiISelect: TIMEOUT occured (5000 ms)
    Shutdown server ...
    DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3216)
    killing process (3216) (SOFT_KILL)
    DpIJ2eeShutdown: j2ee state = SHUTDOWN
    NiSelClear: removed hdl 3 from selectset
    DpDelSocketInfo: del info for socket 3 (type=7)
    NiBufClose: clear extensions for hdl 3
    NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
    NiICloseHandle: shutdown and close hdl 3 / socket 456
    NiSelClear: removed hdl 4 from selectset
    DpDelSocketInfo: del info for socket 4 (type=9)
    NiBufClose: clear extensions for hdl 4
    NiBufSetStat: bufstat of hdl 4 changed from OK to OFF
    NiICloseHandle: shutdown and close hdl 4 / socket 448
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes...
    Stop gateway
    killing process (3172) (SOFT_KILL)
    Stop icman
    killing process (3196) (SOFT_KILL)
    Terminate gui connections
    [DpProcDied] Process lives  (PID:3172  HANDLE:472)
    waiting for termination of gateway
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:49 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process died  (PID:3172  HANDLE:472)
    [DpProcDied] Process died  (PID:3196  HANDLE:464)
    DpHalt: cancel all lcom connections
    MPI CancelAll 2 -> 0
    MPI DeleteAll 2 -> 0
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:50 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:51 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:52 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:53 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:54 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:56 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:57 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:58 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:59 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:16:00 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:16:01 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:16:02 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:16:03 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:16:04 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:16:05 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:16:06 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process died  (PID:3216  HANDLE:440)
    NiIMyHostName: hostname = 'cgnlpt036'
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    DpConvertRequest: net size = 163 bytes
    NiBufSend starting
    NiIWrite: write 562, 1 packs, MESG_IO, hdl 5, data complete
    MsINiWrite: sent 562 bytes
    send msg (len 110+452) to name          -, type 4, key -
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   9927]
    NiBufSend starting
    NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiSelClear: removed hdl 5 from selectset
    MBUF state OFF
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
    LOCK WP ca_blk 1
    make DISP owner of wp_ca_blk 1
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
    MBUF component DOWN
    NiBufClose: clear extensions for hdl 5
    NiBufSetStat: bufstat of hdl 5 changed from OK to OFF
    NiICloseHandle: shutdown and close hdl 5 / socket 368
    MsIDetach: detach MS-system
    EsCleanup ....
    ***LOG Q05=> DpHalt, DPStop ( 2908) [dpxxdisp.c   8460]
    Good Bye .....

    Hi,
    Thanks for the reply.
    dboraslib.dll is properly installed - I checked the registry and physical location of the file.
    The problem was : Environment variable "Path" not being set properly for the "oracle jre".
    Solution:
    After setting the path, the dispatcher started to run properly without any problems.
    Path=<Drive>\oracle\ora92\bin;<Drive>\Program files\Oracle\jre\1.3.1\bin; <Drive>\Program files\Oracle\jre\1.1.8\bin
    FYI - We are using WIN2K with SP4 and oracle DB 9.2
    Regards,
    Sridhar

  • Module could not be found: VersionCue.dll

    Currently, whenever I attempt to start Photoshop CS4 Extended, it launches fine. However, when I try to open a document (doesn't matter whether it's an old photo or a new blank one), I get an error:
    The specified module could not be found. C:\Program Files\Common Files\Adobe\Adobe Version Cue CS4\Client\4.0.0\VersionCue.dll
    I have tried to find a solution (particularly here), but not to much avail . I'm currently using Windows 7 Ultimate, 32-bit.

    Your welcome. I found on the Adobe download page the 4.0.1 version cue update for windows. When you download it make sure you right click on it and run as admin.
    Also if you have a download problem turn off popup blocker in Internet explorer.
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4218
    Edit: Make sure nothing Adobewise is running or running in the background before install.

  • "Unable to load DLL '/system/usr/lib/libidlprinter.so': The specified module could not be found. (Exception from HRESULT: 0x8007007E)"}

    I am using intermec printer (directly loading to the printer no system used for printing) for this program and if i run this,i'm getting this below error
    "Unable to load DLL '/system/usr/lib/libidlprinter.so': The specified module could not be found. (Exception from HRESULT: 0x8007007E)"}
    any help on this .........
    Thanks in advance.
    using System.Globalization;
    using Intermec.Printer;
    using System;
    using System.IO;
    using System.Threading;
    class TestCommunicationUSBHost
        static UI.Canvas _canvas;
        static UI.Keypad _keypad;
        static UI.Canvas.Text _exitInstruction;
        static UI.Canvas.Text _appliCationTitle;
        // static UI.Canvas.Text _companyname;
        static string _operatorCodeValue;
        static UI.Canvas.Text _operatorCodeDisplayText;
        private const string operatorCodeDisplayHeader = "SCAN Code: ";
        static PrintControl printControl = new PrintControl();
        static Drawing drawing = new Drawing();
        private static bool _isExitKeyPressed = false;
      //  private static Communication.USBHost _usbHost;
        static int Main(string[] args)
            // Init new UI canvas
            _canvas = new UI.Canvas();
            // Set up some colors to use
            Color white = new Color(255, 255, 255, 255);
            Color blue = new Color(50, 100, 150);
            // Add UI black background
            UI.Canvas.Rectangle bg = new UI.Canvas.Rectangle(0, 0, _canvas.Width, _canvas.Height, blue);
            _canvas += bg;
            // Add Line
            UI.Canvas.Line ln = new UI.Canvas.Line(10, 35, 300, 35, white);
            _canvas += ln;
            // _companyname = new UI.Canvas.Text(30, 45, "KEYBORD DEMO", "Univers Bold", 18, white);
            // _canvas += _companyname;
            // Add UI keycode text
            _exitInstruction = new UI.Canvas.Text(20, 200, "Press [F4] to EXIT.", "Univers Bold", 18, white);
            _canvas += _exitInstruction;
            _appliCationTitle = new UI.Canvas.Text(05, 05, " A1 Technologies", "Univers Bold", 23, white);
            _canvas += _appliCationTitle;
            _operatorCodeDisplayText = new UI.Canvas.Text(20, 100, operatorCodeDisplayHeader, "Univers Bold", 20, white);
            _canvas += _operatorCodeDisplayText;
            // Set up keypad event handler
            _keypad = new UI.Keypad();
            _keypad.KeyDown += new UI.Keypad.KeyEventHandler(KeyHandler);
            // Set up timer event handler
            UI.Canvas.Timer timer = new UI.Canvas.Timer();
            timer.Interval = 1000;
            timer.Tick += new UI.Canvas.TimerEventHandler(TimerHandler);
            timer.Start();
            //int USBHost port o or Setup USBHost
            Communication.USBHost _usbHost = new Communication.USBHost("/dev/ttyUSB0");
            _usbHost.Open();
            // Enter UI main loop
            _canvas.Run();
            // Cleanup UI
            _canvas.Dispose();
            _keypad.Dispose();
            return 0;
        public static void KeyHandler(Object o, UI.Keypad.KeyEventArgs eventArgs)
            int keycode;
            keycode = eventArgs.KeyChar;
            if (keycode == 4)
                _isExitKeyPressed = true;
                return;
        public static void TimerHandler(Object obj, UI.Canvas.TimerEventArgs eventArgs)
            if (_isExitKeyPressed)
                UI.Canvas.Timer timer = (UI.Canvas.Timer)obj;
                timer.Stop();
                _canvas.Exit();
            else
                // Open the first USB host device and read any data sent
                Communication.USBHost usbHost = new Communication.USBHost("/dev/ttyUSB0");
                usbHost.Open();
                if (usbHost.IsOpen)
                    Console.WriteLine("Opened /dev/ttyUSB0 ({0})", usbHost.HIDName);
                    FileStream fileStream = usbHost.GetStream();
                    try
                        int timeout = 0;
                        int i;
                        while (timeout < 5)
                            // Console.WriteLine("Exiting in {0} secs", 10 - timeout);
                            Byte[] bytes = new Byte[256];
                            if ((i = fileStream.Read(bytes, 0, bytes.Length)) > 0)
                                // string data = System.Text.Encoding.ASCII.GetString(bytes, 0, bytes.Length);
                                string data = System.Text.Encoding.ASCII.GetString(bytes, 0, i++);
                                _operatorCodeValue = data;
                                // _operatorCodeValue = _operatorCodeValue + data;
                                _operatorCodeDisplayText.Data = operatorCodeDisplayHeader + _operatorCodeValue.Substring(_operatorCodeValue.Length - 7, 7);
                                int leftCordinate = 40;
                                drawing.Clear();
                                Drawing.Text line1Text = new Drawing.Text();
                                line1Text.Point = new Point(leftCordinate + 30, 40);
                                line1Text.Data = _operatorCodeValue.Substring(_operatorCodeValue.Length - 7, 7);
                                line1Text.Height = 18;
                                line1Text.FontName = "CG Times Bold";
                                drawing += line1Text;
                                drawing.PartialRendering = true;
                                printControl.PrintFeed(drawing, 4);
                            else
                                Thread.Sleep(1000);
                                timeout++;
                    catch (Exception ex)
                        Console.WriteLine("Exception reading /dev/ttyUSB0: {0}", ex.Message);
                // Wait a short while
                Thread.Sleep(1000);
                // Clean up 
               // usbHost.Dispose();
            return;

    Hiya,
     The error is because the app tried to import that driver but it was not found. So, you will need
    to recheck your project setup, provide locations for imports, etc. I am not familar with Intermec Printer.
    The code snippet does not show any information about the DLL import, check there too.
    Hope this helps. :)

  • Oraoledbpus.dll: The specified module could not be found

    We are trying to access an Oracle 9.1 database through a Crystal report that uses the Oracle ODBC driver v9.02. The report is generated through an ASP page running on IIS 6 and a Windows 2003 server.
    We get a popup on the server console intermittently with the following error:
    Oraoledbpus.dll: The specified module could not be found
    We have checked the security settings on the Oracle Home directory and assigned appropriate access to all the following:
    Administrators
    SYSTEM
    Authenticated Users
    IUSR
    ASPNET
    We have also checked that the Oracle Home bin directory is in the PATH. This dll does exist in the bin directory. When the report is run in the Crystal Reports designer there is no problem. The strange things is that the Data Source used by the report is ODBC and not Ole DB.
    Any ideas or suggestions would be much appreciated.

    Hello buddy!
    Make sure there is no dll dependence missing. You can try using Dependency walk tool.
    Igor Monteiro

  • Designer: dbd_sap.dll (the specified module could not be found)

    Hi,
    I installed BO Edge XI 3.1 server on Linux and the Edge XI 3.1 clients on WinXP PCs as well as the SAP Integration Kit on the server as well as on the clients. The transport files were imported too.
    I can successfully connect to BW within the CMC -> Authentication -> SAP. I also can logon to InfoView, Designer,... with SAP BW credentials.
    When I am trying to create a new universe and universe connection with SAP credentials I get the error:
    "The error 'cs:dbdriver failed to load : c:\program files\business objects enterprise 12.0\win32_x86\dataaccess\connectionserver\dbd_sap.dll (the specified module could not be found)"
    The dbd_sap.dll file is in the correct folder.
    We re-installed the Integration Kit and rebooted, no success.
    We are currently uninstalling all BO products (Client tools, Crystal Reports 2008, Integration Kit) on that client and will try again.
    We are on the base version of the products mentioned; I read the changelog of the ServicePacks, it seems that none of the 2 SPs made a correction regarding this error.
    What could be the error?
    Thanks!

    >
    Efstratios Karaivazoglou wrote:
    > Make sure to use CR Designer 2008 V1 (WITHOUT SP2) unless you install SP2 for BO Edge.
    OK, so I will only install the BO Client Tools as well as the SAP Integration Kit. I don't necessarily need CR at this moment.
    @ Raghu: we are on the base version of the BO Edge and SAP Integration Kit installation (= no SP, no FP)
    EDIT:
    I now installed the BusinessObjects Client Tools and the SAP Integration Kit on another PC, the error didn't occur on this PC

  • OraOledbous10.dll Specific module could not be found

    To Any Oracle experts,
    I have downloded the latest Oracle 10g Vista\XP client 10.2.03 which includes the OraOledb ADO drivers. I am getting a spuradic error :
    "OraOleDBpus10.dll .. Specific module could not be found." My Oracle database is 9i ..
    Strangly enough .. this only occurs when I run my executable from my local drive ( xp sp3 ) . if I place the executable on a network drive .. running it from my box ( same box ) .. the error does not occur ..
    I am new to this forum .. I am using a TOLeAuto() class from xHarbour and Borland's C++ 5.5 compiler. The below code is the syntax. I loaded the Oracle database utilities, SQL+ and the Windows Drivers which includes the OraOledb. I know the setup is working because I can connect with the SQL+ utility so I know my tnsnames and sqlnet.ora files are correct.
    Again .. this error only shows up sporadically on my local xp-sp3 box .. I have not loaded it on Vista .. and forget about Windows 7 .. the client will not even install because the OS version number is out of range.
    The paths are correct, and my compiled program runs from a network .. just not ( always ) on my local xp sp-3 machine .. especially seems to happen after a run-time failure of my application. This is an app in development and I wil lhave run-time failures constantly.
    Any advice would be quite helpful
    Rick Lipkin
    SC Dept of Health, USA
    xPROVIDER := "OraOledb.oracle"
    xSOURCE := "efis"
    xUSERID := "suntrack"
    xPASSWORD := "xxxxxxxx"
    oRs := TOleAuto():New( "ADODB.Recordset" )
    oRs:CursorType := 3 // opendkeyset
    oRs:CursorLocation := 3 // local cache
    oRs:LockType := 3 // lockoportunistic
    cSQL := "SELECT FAC.LOCAL_FACIL_EID, "
    cSQL += "FAC.TANK_OWNER_EID, "
    cSQL += "FAC.SITE_NUM AS SITE_NUM, "
    cSQL += "STANDARDTASKS.GETNAME( LOCAL_FACIL_EID,'NO_NUM' ) AS FACILITY, "
    cSQL += "ADDR.ADDRESS_1 AS ADDRESS, "
    cSQL += "ADDR.CITY AS CITY, "
    cSQL += "ADDR.STATE_CODE AS STATE, "
    cSQL += "STANDARDTASKS.GETNAME( FAC.TANK_OWNER_EID,'NO_NUM' ) AS OWNER, "
    cSQL += "FAC.LOCKED_IND AS READ_ONLY "
    cSQL += "from SUNTRACK.EFIS_UST_FACILITIES FAC, "
    cSQL += "SUNTRACK.ADDRESSES ADDR "
    cSQL += "where ADDR.OWNER_EID = FAC.LOCAL_FACIL_EID "
    cSQL += "AND ADDR.ADDRESS_TYPE_CODE = 'BUSINESS' "
    cSQL += "AND ADDR.STOP_DATE IS NULL order by site_num"
    TRY
    oRS:Open(cSQL,'Provider='+xPROVIDER+';Data Source='+xSOURCE+';User Id='+xUSERID+';Password='+xPASSWORD )
    CATCH oErr
    MsgInfo( "Error in Opening EFIS_UST_RELEASES table" )
    oWndChild:Show()
    RETURN(.F.)
    END TRY

    Would you resolve this problem? I have the same problem.

  • I continue to have an Adobe error when booting up my computer. It reads:   this specific module could not be found.    \AppData\local\diagnostics\tlfpizv.dll

    I continue to have an Adobe error when booting up my computer. It reads:   this specific module could not be found.    \AppData\local\diagnostics\tlfpizv.dll
    Please tell me there is a fix that does not involve buying a computer clean sweep program.

    Hi brigitta2,
    You might be getting the error message because of any of the following reasons:
    .dll files are corrupt or missing
    Attack of malware or other spyware
    Incorrect installation of applications
    Damaged Windows registry
    Old Windows device drivers that need to be updated
    The problem can be sorted if you know the exact reason behind the same. Please let me know the exact error message that appears on your screen.
    If the issue is with damaged files then you might need to replace them or if it is a system issue, then please take your laptop to an expert who can deal with system issues.
    Regards,
    Anubha

  • Loadlibrary ("olkexpress5.dll") failed - The specified module could not be found.

    About a month ago, the Desk Manager app stopped recognizing that my blackberry was connected via usb so I decided to remove/reinstall the Blackberry Desktop 4.3 software. Now, everytime I install the software I receive the following message during the installation:Errors 1904.Module C:\Program Files\Research In Motion\Blackberry\IS71 Connectors\OE Connector\OLKExpress5.dll failed to register.  HRESULT-2147024770.  Contact your support personnel. If I try to manually register the file it fails with the following error "Loadlibrary ("olkexpress5.dll") failed - The specified module could not be found." My the desktop manager currently will recognize my blackberry as long as I don't disconnect the blackberry before first powering off the laptop.  Any one have any ideas regarding this issue?

    Perform clean uninstall of BlackBerry Desktop Software.
    Check for instruction: http://www.blackberry.com/btsc/KB02206
    After that  go to here: http://na.blackberry.com/eng/services/desktop/
    and download the latest (v4.7) BlackBerry Desktop Software.
    I recommend to download  BlackBerry Desktop Software without Media Manager.
    Media manager is not necessary to transfer files to the device and vice versa.
    Check this link: HOWTO : use your blackberry as a USB device

  • Script error line 2053 the specified module could not be found URL res://ieframe.dll/preview.js

    Script error line 2053 the specified module could not be found URL res://ieframe.dll/preview.js

    The issue is caused when Windows creates the printer profile in the control panel that it doesn't correctly create it with the drivers.
    We're not going to completely uninstall all the HP software, instead we're going to remove the corrupt Windows printer profile and reinstall it.  Total time for this on an average computer is about 5-10 minutes to completely repair (including reboot).
    1) Navigate to Start Menu > Devices and Printers or Start Menu > Control Panel > Printers
    2) Select each printer profile for the printer with an issue, then select remove device/printer.
    3) Reboot
    4) Navigate to Start Menu > All Programs > HP > insert model # here > Add Printer (or Setup Wizard)
    5) Follow the setup prompts to reinstall the printer profile and it recreates the Windows printer.
    6) Run the HP Update Tool from Start Menu > All Programs > HP if your printer installs it, rebooting afterwards if necessary.
    7) Test by printing google.com (uses very little ink when the test page comes out).
    Let me know if you have any questions or issues.
    Thanks,
    Dan
    I work for an internation tech company and personally perform thousands of computer repairs a year. I'm based out of the US working for a US company, and have been working on computers for over 13 years.
    ****Click the White Kudos star to say thanks****
    ****Please mark Accept As Solution if it solves your problem****

Maybe you are looking for