HR: 0hr_pt_2 Created an Infotype 439 in HCM

Hi All, we just went live with HR Analytics for BW. When we initialized the datasource 0HR_PY_1, we saw that it created infotype 439 in HCM under ID ALE_BW_HCM. Due to which there were security issues in HCM system because infotype 439 was not part of the user's security profile. SU53 showed that they didn't had access to 439.
The reason is quite unknown. I have never heard about any BW extractors creating any entries in the source system. Has anyone faced or worked on similar extractor? Kindly help us understand the issue. Thanks
Mark

Hello uday,
I am training in BI with hr module have to work on hr reporting.
I had seen all some of your posts regarding hr reporting with bi.
i dont have any acess to check the oss notes can u provide some explanation for each of the notes with reasoning below or
can u email me to the [email protected]
1. 389839 Time data extraction: Database statistics and delta mode
2. 397610 0HR_PT_2, 0HR_PT_3: Performance
3. 389837 Time data extraction: Delta initialization & performance
4. 522096 Multiple delta initialization: 0HR_PT_1 0HR_PT_2 0HR_PT_3
5. 354584 Extraction: DB index for performance improvement
6. 670751 Time management extractors and new mployees
7. 377361 Time data extractor: Employee without IT 0007
8. 757222 Delta extraction in time management
9. 353177 Long-run. progr. at time data
" I will be very glad to look forward for your reply."

Similar Messages

Create an infotype for Training and Events

Hello SAP HCM Community,
Does anyone have a step-by-step procedure on how to create an infotype for Training and Events (specifically for External Persons - H)?
I also need to find out how do I edit an existing Training and Events or PD infotype, i.e. to add fields or remove them?
Kind regards
Dorianne

Hi Dilek,
Firstly before I give you the example please advise if IT1690 is a SAP standard infotype?
Example:
When creating a Business Event (E) via transaction PSV2, PV10 or PV11 I want certain rules to be in place when the user selects the following:
When selecting an option under 'Location' for example "Internal", the user will then go to "Organizer Data". Under "Organizer Data" there will be a drop down list of A, B or C. For "Internal" Location the user should only pick option B, so if they select any of the other options and attempt to save the transaction will be stopped with an error with a message, i.e. " Incorrect Organiser Data Captured for Internal".
I look forward to your response.
Kind regards
Dorianne

About to use HR_INFOTYPE_OPERATION to create customer infotype issue:

hi
i want to create infotype use function(HR_INFOTYPE_OPERATION).
this infotype is customer infotype.
the first scenario is:
i'm be sure no data about one employee in this infotype(9004).
to call with data upload function and put data into internal table IT_PA9004.
and the table data as follow:
one line: it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080201' , it_pa9004-endda = '20080930'
          it_pa9004-zzvalue = 50 (customer field).
two line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080201' , it_pa9004-endda = '20080930'
          it_pa9004-zzvalue = 60 (customer field).
three line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
          it_pa9004-zzvalue = 70 (customer field).
four line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
          it_pa9004-zzvalue = 80 (customer field).
i run the programme and get information is:
11022887 insert ok.
11022887 insert ok.
11022887 insert ok.
11022887 insert ok.
but i use the transation PA30 to view all data:
in database just exist one row:
four line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
          it_pa9004-zzvalue = 80 (customer field).
the second scenario is:
in database the infotype have exist one row:
           pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
           pa9004-begda = '20080318' , pa9004-endda = '20080318'
           pa9004-zzvalue = X (customer field).
and i create another row:
line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
          it_pa9004-begda = '20080318' , it_pa9004-endda = '99991231'
          it_pa9004-zzvalue = 80 (customer field)
i run the programme and get information is:
11022887 insert ok.
the three scenario is:
    set HR_INFOTYPE_OPERATION of import parameter operation = 'MOD'
    in any scenario will get error :not exist subtype .
what heppend about HR_INFOTYPE_OPERATION working,i had to use this function to
   create other infotype of SAP owner.
   and will create successfully.
so i thank it may be config Constraints about customer infotype.
is time Constraints effect?
so i want to how to check it?
and if i want to create one infotype for customer using PM01 what some thing
must be taken into account.
think you advance.
partial source code as follow:
FORM ACTION_INSERT .
DATA: P_FLAG TYPE C.
DATA: WA_LOG LIKE LINE OF DATA_LOG.
DATA: PP_ACTION TYPE PSPAR-ACTIO.
LOOP AT IT_PA9004.
    CLEAR P_FLAG.
    CALL FUNCTION 'HR_PSBUFFER_INITIALIZE'.
    PERFORM lock_employee USING IT_PA9004-pernr CHANGING P_FLAG.
    PP_ACTION = IT_PA9004-ACTION.
    PERFORM HR_INFOTYPE_OPERATION USING IT_PA9004 PP_ACTION CHANGING P_FLAG.
    IF P_FLAG IS INITIAL.
      if test_run = space.
        COMMIT WORK.
      else.
        ROLLBACK WORK.
      endif.
      write:/ it_pa9004-pernr,'insert ok'.
    ELSE.
      ROLLBACK WORK.
      write:/ it_pa9004-pernr,'error'.
    ENDIF.
    PERFORM unlock_employee USING IT_PA9004-pernr .
ENDLOOP.
ENDFORM.                    " ACTION_INSERT
FORM LOCK_EMPLOYEE USING    P_PERNR
                    CHANGING PP_FLAG.
CHECK PP_FLAG IS INITIAL.
CLEAR P_RETURN.
CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
    EXPORTING
      number = P_PERNR
    IMPORTING
      return = P_RETURN
    EXCEPTIONS
      OTHERS = 01.
CALL FUNCTION 'HR_INITIALIZE_BUFFER'
    EXPORTING
      pernr = P_PERNR.
IF P_RETURN IS NOT INITIAL.
    PP_FLAG = '1'.
ENDIF.
ENDFORM.                    " LOCK_EMPLOYEE
FORM HR_INFOTYPE_OPERATION USING    P_PA9004 LIKE IT_PA9004
                                     P_ACTION type PSPAR-ACTIO
                            CHANGING PP_FLAG.
CHECK PP_FLAG IS INITIAL.
DATA: bapipakey type bapipakey,
        P_SUBTY TYPE P9004-SUBTY,
        PP_9004 TYPE TABLE OF P9004 WITH HEADER LINE.
CLEAR P_RETURN.
REFRESH PP_9004.
MOVE-CORRESPONDING P_PA9004 TO PP_9004.
IF P_ACTION = 'INS'.
    PP_9004-AEDTM = SY-DATUM.
    PP_9004-UNAME = SY-UNAME.
ENDIF.
IF P_ACTION = 'MOD'.
    PP_9004-AEDTM = SY-DATUM.
    PP_9004-UNAME = SY-UNAME.
ENDIF.
APPEND PP_9004.
P_SUBTY = P_LGART.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
    EXPORTING
      infty         = '9004'
     subtype       = 'FQ03'
      subtype       = P_SUBTY
      number        = PP_9004-pernr
      validityend   = PP_9004-ENDDA
      validitybegin = PP_9004-begda
     RECORDNUMBER = pp_9004-seqnr
      record        = PP_9004
       operation     = 'INS'
     operation     = P_ACTION
      nocommit      = 'X'
    IMPORTING
      return        = P_RETURN
      key           = bapipakey
    EXCEPTIONS
      OTHERS        = 0.
IF P_RETURN IS NOT INITIAL.
    PP_FLAG = '9'.
ENDIF.
ENDFORM.                    " HR_INFOTYPE_OPERATION
FORM UNLOCK_EMPLOYEE USING    P_PERNR.
CALL FUNCTION 'BAPI_EMPLOYEE_DEQUEUE'
    EXPORTING
      number = p_pernr
    IMPORTING
      return = P_RETURN
    EXCEPTIONS
      OTHERS = 01.
ENDFORM.                    " UNLOCK_EMPLOYEE

hi
i want to create infotype use function(HR_INFOTYPE_OPERATION).
this infotype is customer infotype.
the first scenario is:
i'm be sure no data about one employee in this infotype(9004).
to call with data upload function and put data into internal table IT_PA9004.
and the table data as follow:
one line: it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080201' , it_pa9004-endda = '20080930'
          it_pa9004-zzvalue = 50 (customer field).
two line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080201' , it_pa9004-endda = '20080930'
          it_pa9004-zzvalue = 60 (customer field).
three line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
          it_pa9004-zzvalue = 70 (customer field).
four line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
          it_pa9004-zzvalue = 80 (customer field).
i run the programme and get information is:
11022887 insert ok.
11022887 insert ok.
11022887 insert ok.
11022887 insert ok.
but i use the transation PA30 to view all data:
in database just exist one row:
four line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
          it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
          it_pa9004-zzvalue = 80 (customer field).
the second scenario is:
in database the infotype have exist one row:
           pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
           pa9004-begda = '20080318' , pa9004-endda = '20080318'
           pa9004-zzvalue = X (customer field).
and i create another row:
line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
          it_pa9004-begda = '20080318' , it_pa9004-endda = '99991231'
          it_pa9004-zzvalue = 80 (customer field)
i run the programme and get information is:
11022887 insert ok.
but in database just exist the first data
           pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
           pa9004-begda = '20080318' , pa9004-endda = '20080318'
           pa9004-zzvalue = X (customer field).
the three scenario is:
    set HR_INFOTYPE_OPERATION of import parameter operation = 'MOD'
    in any scenario will get error :not exist subtype .
what heppend about HR_INFOTYPE_OPERATION working,i had to use this function to
   create other infotype of SAP owner.
   and will create successfully.
so i thank it may be config Constraints about customer infotype.
is time Constraints effect?
so i want to how to check it?
and if i want to create one infotype for customer using PM01 what some thing
must be taken into account.
think you advance.
partial source code as follow:
FORM ACTION_INSERT .
DATA: P_FLAG TYPE C.
DATA: WA_LOG LIKE LINE OF DATA_LOG.
DATA: PP_ACTION TYPE PSPAR-ACTIO.
LOOP AT IT_PA9004.
    CLEAR P_FLAG.
    CALL FUNCTION 'HR_PSBUFFER_INITIALIZE'.
    PERFORM lock_employee USING IT_PA9004-pernr CHANGING P_FLAG.
    PP_ACTION = IT_PA9004-ACTION.
    PERFORM HR_INFOTYPE_OPERATION USING IT_PA9004 PP_ACTION CHANGING P_FLAG.
    IF P_FLAG IS INITIAL.
      if test_run = space.
        COMMIT WORK.
      else.
        ROLLBACK WORK.
      endif.
      write:/ it_pa9004-pernr,'insert ok'.
    ELSE.
      ROLLBACK WORK.
      write:/ it_pa9004-pernr,'error'.
    ENDIF.
    PERFORM unlock_employee USING IT_PA9004-pernr .
ENDLOOP.
ENDFORM.                    " ACTION_INSERT
FORM LOCK_EMPLOYEE USING    P_PERNR
                    CHANGING PP_FLAG.
CHECK PP_FLAG IS INITIAL.
CLEAR P_RETURN.
CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
    EXPORTING
      number = P_PERNR
    IMPORTING
      return = P_RETURN
    EXCEPTIONS
      OTHERS = 01.
CALL FUNCTION 'HR_INITIALIZE_BUFFER'
    EXPORTING
      pernr = P_PERNR.
IF P_RETURN IS NOT INITIAL.
    PP_FLAG = '1'.
ENDIF.
ENDFORM.                    " LOCK_EMPLOYEE
FORM HR_INFOTYPE_OPERATION USING    P_PA9004 LIKE IT_PA9004
                                     P_ACTION type PSPAR-ACTIO
                            CHANGING PP_FLAG.
CHECK PP_FLAG IS INITIAL.
DATA: bapipakey type bapipakey,
        P_SUBTY TYPE P9004-SUBTY,
        PP_9004 TYPE TABLE OF P9004 WITH HEADER LINE.
CLEAR P_RETURN.
REFRESH PP_9004.
MOVE-CORRESPONDING P_PA9004 TO PP_9004.
IF P_ACTION = 'INS'.
    PP_9004-AEDTM = SY-DATUM.
    PP_9004-UNAME = SY-UNAME.
ENDIF.
IF P_ACTION = 'MOD'.
    PP_9004-AEDTM = SY-DATUM.
    PP_9004-UNAME = SY-UNAME.
ENDIF.
APPEND PP_9004.
P_SUBTY = P_LGART.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
    EXPORTING
      infty         = '9004'
     subtype       = 'FQ03'
      subtype       = P_SUBTY
      number        = PP_9004-pernr
      validityend   = PP_9004-ENDDA
      validitybegin = PP_9004-begda
     RECORDNUMBER = pp_9004-seqnr
      record        = PP_9004
       operation     = 'INS'
     operation     = P_ACTION
      nocommit      = 'X'
    IMPORTING
      return        = P_RETURN
      key           = bapipakey
    EXCEPTIONS
      OTHERS        = 0.
IF P_RETURN IS NOT INITIAL.
    PP_FLAG = '9'.
ENDIF.
ENDFORM.                    " HR_INFOTYPE_OPERATION
FORM UNLOCK_EMPLOYEE USING    P_PERNR.
CALL FUNCTION 'BAPI_EMPLOYEE_DEQUEUE'
    EXPORTING
      number = p_pernr
    IMPORTING
      return = P_RETURN
    EXCEPTIONS
      OTHERS = 01.
ENDFORM.                    " UNLOCK_EMPLOYEE

How to create custom infotype for training and event management

hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
PS No PA0000-> PERNR
Name - PA0001 -> ENAME
IS PS.No. PA0001-> PS no. of Immediate Superior
IS name PA0001 -> ENAME
thanx in advance
afzal

Hi,
Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
If you wish to create a PD infotype, use transaction PPCI to create the infotype.
But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
If you wish to create a PA infotype, use transaction PM01 to create the infotype.
But before that you may be required to create a strcuture PSnnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
Regards,
Srini

How to create an infotype in sap ecc6.0 ?

Hi all,
I know i how to create an infotype in sap 4.7, but i am facing the problem while
creating an infotype in sap ecc6.0 version. could u plz provide me the info with screen shots how to create an infotype and how to enhace that infotype ?
Waiting for u r response.
Regards,
Ravi

Hi ,
To create OM infotype:
1. Go to SE11 and create a structure HRI9XXX (9XXX --> name of the infotype). Add the required fields to this structure and save and activate. then come out of it.
2. Go to PPCI and enter Infotype number (9XXX) and description.
3. Click create.
4. In the infotype category select details for the infotype.
5. Click create button. It should create the infotype.
6. Click on Check. A window with menu will open.
7. In that window navigate to Table Entries.
8. Under table Entries, select T777I and click on change.
9. It opens SM30. Click on Maintain.
10. Select the infotype and add information for "Time Constraint" and "Infotype Per Object Type".
11. Save.
12. Go back to check menu, see if all entries exist. Do not worry last 5 table entries. And you are done

Error while creating pd infotype

Hi friends,
I am creating PD infotype which is having same structure as 1002.here i copied module pool program of 1002 to my infotype and there i made changes to fields.when i am running it in pp02 transaction it is giving runtime error create_data_unknown_type.this exception is coming from module 'initialize_dyn_tab' which is in the PAI of screen no 2000.will any one pls help on this issue.
Thanks,
kumar.

Hi Chandra,
Actually, you don't need to. System should create it.
If you have problems though, you can refer to the article below which expains a more detailed solution of creating a PD infotype:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c03ec8d4-71c9-2d10-e1b9-b3142180f094
Regards,
Dilek

How to create an infotype with one of its field length eq 1000.??

hi ,
i need to create a infotype where one of the field length is 1000 characters how do i achieve this. if i give more than 255 in the PS structure it will not allow. then how do i get a text field of 1000 chars in the screen ( which is an input field)

You can use those function calls even inside a PA Infotype.. they just invoke the text ediotr table control.. I gave you the reference of the PD infotype 1002 just for an idea. I don't think you will able to meet your 1000 char reqt without using the text editor.
~Suresh

Create PD Infotype link to Object USER

Dear Experts,
I have created a custom PD Infotype P9032, under Object "User'. But when i go to Expert Mode to create the infotype record, it screen brings me to "Su01" screen ie. create SAP user instead.
If i change the Object to "Organizational Unit" and create the infotype record, it shows me the correct custom infotype screen.
How do i link my custom PD infotype to Object User? ... i have done the necessary updating of table T777I.
Thanks so much,
Zul

Hi Dusan,
perhaps the following steps will help you.
1. calls se11
2. mark radiobutton in front of Data type
3. fill data type with HRI9003
4. goto menu [Utilities] and select [Environment Analysis]
This will display all objects i hope also the 3 missed. From there
you could mark it and delete it.
Hope this helps.
Regards
Bernd

Unable to create the infotype

Hi SAP Guru,
Greetings for the day,
I had hired a guy with the infotype of 0207,0208,0209,0210 after hiring i try to transfer him using TRANSFER ACTION to another location say from New York to California, which is entirely a different state, where unable to create the 0208,0209,0210 in that i can able to create 0207 infotype alone, when i tried to create after 0207 creation, it is not accepting the information, Here i am looking for some one help, where some one can throw a torch for this issue.
I had checked with dynamic action, which shows correctly.
Pls help me in this regards, this is very urgent.
Thanks in advance for your reply.
Regards,
Babu.

Generally, an Infotype 208 is not required. Therefore, you would
not get an error in RPCACLU0 if an employee does not have one assigned
Without an IT0208 record, the system uses the tax authority
specified on IT0207. Additionally, the same applies to IT0209; one is
not required and the system will use that of either IT0207 or IT0208.
Best regards,
Márcio Leoni

How to create an Infotype in OM

Dear all,
Can any one please let me know How to create an Infotype in OM.
thanks
abdul

Hi ,
To create OM infotype:
1. Go to SE11 and create a structure HRI9XXX (9XXX --> name of the infotype). Add the required fields to this structure and save and activate. then come out of it.
2. Go to PPCI and enter Infotype number (9XXX) and description.
3. Click create.
4. In the infotype category select details for the infotype.
5. Click create button. It should create the infotype.
6. Click on Check. A window with menu will open.
7. In that window navigate to Table Entries.
8. Under table Entries, select T777I and click on change.
9. It opens SM30. Click on Maintain.
10. Select the infotype and add information for "Time Constraint" and "Infotype Per Object Type".
11. Save.
12. Go back to check menu, see if all entries exist. Do not worry last 5 table entries. And you are done

How we create custom infotype and how to configure with its subtypes.

hai abap-hr gurus,
how to create custom infotype and how to configure with its subtypes. when i am creating infotypes i am not getting how to configure subtypes.
plz help me for this with an example code.
thanks..
kiran kumar

Hi Kiran,
Please fallow the below steps to create the custom infotype. If you have any quires let me know.
For Creation of Infotype first Go to Transaction PM01, Enter the custom Infotype number which you want to create, it should be a 4 digit number and have to start with 9xxx.
then select the `Employee Infotype' radio button
after that select the `PS Structure Infotype'
then click on Create A separate table maintenance window appears
then Create a PS structure with all the fields you want on the infotype
Save and Activate the PS structure
now Go back to the initial screen of PM01
Click on `All' push button. It takes a few moments
Click on `Technical Characteristics. Infotype list screen appears
Click on `Change'(pencil) button
Now select your Infotype and click on `Detail' (magnifying glass) button
Give `T591A' as subtype table & also Give `T591S' as subtype txt tab
Give your subtype field as subtype field & Save and come back to PM01 initial screen
Click on `Infotype Characteristics' Infotype list screen appears
Click on `Change' (pencil) button & on New Entries
and then Enter your Infotype number and short text Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference
to fill yours). Now save ur entries
Now the Infotype is created and ready to use.
If you want to change the layout of the Infotype as per your
requirement
In the PM01 initial screenSelect `Screen' radio button and give
2000 as the screen name, then click on edit.
In the next screen.. Select `Layout Editor' and click `Change'.
Screen default layout appearshere you can design/modify the
screen..change the attributes of the fields..etc.
Save and activate. (Don't forget to `Activate at every level)
Regards,
Ramakrishna kotha.

Creating Custom Infotype - Personnel Administration - ABAP-HR

What are the steps while creating custom infotype in PA Subodulein ABAP-HR?

Hi,
Welcome to SCN. I've moved your post to a more appropriate place where there is more likelihood of the question being answered.
Be sure to read the "rules of engagement" for the forums and do search before posting.
I found below thread and link with simple search:
Infotype enhancement - Short dumps (PA30 / PM01).
http://www.sap-img.com/human/how-to-create-a-hr-infotype.htm
Regards,
Naveen

HR ABAP-Need help in creating the Infotype

Hi All of you,
I have to craete an infotype with 16 fields.
But as per my requirement i have to design the screen such as it has to be four tabs ,
Under each tab i have to dispaly four fields.
Urgent please.....
Thanks in Advance,
Mani.

Create you infotype using standard method.
Then all these screen changes needs to be done on the generated Module Pool.
This chanes will be like any other general module pool proram..
Regards,
Amit

ABAP-HR - CREATING CUSTOM INFOTYPES

While creating custom infotypes, what happens when we click "All" Push button in 2nd phase in PA Submodule?

Why not try it and find out. Oh, and don't post in all CAPITALS.

Problem in creating HR Infotype

Dear All,
I am creating a infotype for HR module this is for CTC. My requirement is that what the changes made in infotype 0008 are also reflect in my infotype. e.g. in if there are 5 chages is made for employee in 0008 infotype also reflect in my infotype. how i made this in my infotype. the change date end date is also taken from the 0008 infotype.
So my requirement is all the data coming from 0008 than some addition field adding in MY infotype in case of CTC . so give me some logic how i made this.
Regards,
Pankaj Vashista

Dear Bala,
I am not now how the dynamic action create. Is this fulfill my requirement .
Is By writting dynamic action my infotype is also updated ???????
Please any one solve my promlem.
Thanks in advance
Regards,
Pankaj

HR: 0hr_pt_2 Created an Infotype 439 in HCM

Similar Messages

Maybe you are looking for