HR-ABAP catsdb and pa0001 link

Hi all,
I am using catsdb and Pa0001 tables.In my selection screen
i am using workdate field.
In My report i have to display only exempt employees depending
on workdate ranges only.
I want to know how to link between these two tables using exmpt employee.
Regards,
Vasu.

As far as my understanding u have a subtype in Employee Group(pa0001-persg) and u want to select the employees depending upon this subtype in between Work dates(CATSDB-WORKDATE).If yes then the task is simple u need to select the data depending upon PERNR.Becoz PERNR is common between these two tables.If u didnot get the answer then Provide me the exact requirement.
Give me points if found helpful

Similar Messages

Web Dynpro ABAP: Documentation and help link

Hi,
I'm in the process of creating a Web Dynpro ABAP application and was wondering whether you can maintain Documentation for the application, as you would a standard ABAP report? I see the Documentation option in the Goto menu of the workbench, but it is inactive.
Also, i notice you can maintain a 'Help Link' for the application. Does anyone have any information on this as I can't find anything on the SAP Help website.
Thanks,
Nick

Hi Nick,
here's the link to the corresponding documentation:
http://help.sap.com/saphelp_nw04s/helpdata/en/54/bad1d244b2754bac09ae1558c15984/frameset.htm
If you choose the Change/Edit button at the right side of the input field, you can navigate to the info object to which you want to set the link in the Knowledge Warehouse.
Of course, you need an info object in the correct context in the KW for this as well as a correctly maintained RFC destination to the Knowledge Warehouse system.
Regards, Heidi

How to call a idoc in abap program and updates catsdb table

how to call a idoc in abap program and updates catsdb table
thank you,
Jagrut BharatKumar Shukla

Hi Kishan,
You can refer to following help document,
http://help.sap.com/saphelp_nw04/helpdata/en/bf/d005244e9d1d4d92b2fe7935556b4c/content.htm
Regards,
Meera

How to extract attachment from ABAP proxy and store in archive link....

Hi Experts,
I need to consume an incoming email attachment in the ABAP Proxy program (POP Mail --> PI --> ABAP Proxy) and then store this file in the IBM content management server through the Archvie Link connection.
Any idea how to implement this piece of code in ABAP?
Regards,
Shobhit

Hi Shobhit
You can get the files from Sender Mail adapter. In proxy implement the method of protocol IF_WSPROTOCOL_ATTACHMENTS as said above.
Archive Link supports HTTP, RFC etc depends on the system you are going to use for archiving. For your case you have IBM server i think you have to do HTTP synchronous. This will be like an interface again for you.
Why are you using ERP system in middle. I think you can directly dump data to IBM server.
Thanks
Gaurav

Linking table BSEG and PA0001 to display PA0001-SNAME

I am working on a report where I am facing problem with field length compatibility.
I have to pass value of field BSEG-HZUON to PA0001-PERNR and display SNAME in the output.
But the field length of HZUON and PERNR does not match each time, hence SNAME is displayed as blank in the output for these cases.
Please suggest a solution to this problem or possibility of using some other field as a linkage between tables BSEG and PA0001.

Hi,
Yes, you are right. You can not link based on these fields.
Possible solutions:
1. Within a SELECT and ENSSELECT on bseg
    move hzuon to a workfield
    SELECT on pa0001 using the workfield
2. SELECT all BSEG data into an internal table (with an additional field PERNR)
    Loop over the internal table filling the pernr.
    SELECT all PA0001 data into an other internal table with the FOR ALL ENTRIES
    Combine the internal tables.
Succes.

Error 7 occurred at ABAPI Dist Report Read Link Info Error.vi - [.....] - RTBUIP_Build_Invoke.vi.ProxyCaller

Hi all,
I am on a field campaign with my Labview-controlled instrument. I wanted to make a small change to the code and build it again for uploading to a cFP-2020 Fieldpoint but the application builder stopped with the following error message:
Error 7 occurred at ABAPI Dist Report Read Link Info Error.vi -> ABAPI Dist Cmp Settings to Disk Hier.vi -> ABAPI Get Settings From File2.vi -> ABAPI Get Settings From File.vi -> RTBEP_Invoke_Build_Engine.vi -> RTBUIP_Build_Invoke.vi -> RTBUIP_Build_Invoke.vi.ProxyCaller
This is another computer than the one I used in the lab previously so might have forgotten to install something. I just copied the whole application folder with project file and subfolders
to the Laptop I am using now. Labview version should be the same though (8.20).
Any suggestions?
Olaf

Hello Olaf,
This error is usually found when a subVI or a support file (DLL, custom control, etc)
isn't able to be found by the application builder. Possible reasons
for this could include subVIs no longer located in their original
paths and in need to be relinked, a DLL that isn't included in the build,
and many other possibilities.
You wrote that you copied the project from another PC, so it is very possible that some file went missing. Are all VIs in your project executable?
You could try to mass compile all the VIs in your project and see if that helps.
Regards,
Johannes
AE, NI Germany

ABAP Mapping and Message Mapping

Hello
I want to do the followig mapping
File - > IDOC
field1 ->field_idoc1
field2 ->field_idoc2
field3 ->field_idoc3
field4 -> (based on an dictionary table in the R/3)
For the first 3 fields I will use message-mapping.
For field4 I heard about ABAP Mapping. Select with the value of field4 in an ABAP Table and response the new value to the mapping back.
Would both mappings in one Interface-Mapping work?
Regards
Christoph

Christoph, There was an article previously available in articles section, now i dont find the link.
I have given a sample code below. You can find lot of sample JCO code provided along with the JCO library that can be downloaded from service.sap.com.
JCO.Repository mRepository;
JCO.Client mConnection = JCO.createClient(
               sapClient,
               userName,
               password,
               language,
               hostName,
               systemNumber );
// connect to SAP
mConnection.connect();
// create repository
mRepository = new JCO.Repository( "sample", mConnection );
// Create function
JCO.Function function = null;
IFunctionTemplate ft = mRepository.getFunctionTemplate("Z_TEST");
function = ft.getFunction();
// Obtain parameter list for function
JCO.ParameterList input = function.getImportParameterList();
// Pass function parameters
input.setValue( param1_value , "P_PARM1");
input.setValue( param2_value , "P_PARM2");
JCO.ParameterList tabInput = function.getTableParameterList();
JCO.Table inputTable = tabInput.getTable("T_PARM3");
inputTable.appendRow();
inputTable.setValue("test" , "IDOC");
mConnection.execute( function );
String ret = function.getExportParameterList().getString( "P_GEN_NUM" );
mConnection.disconnect();
return ret ;
Regds
Saravana

PI Pipeline Doubt : Pipeline Steps in ABAP stack and JAVA stack

Hello
Can anyone please assist me with which stages steps of the PI Pipeline are executed on the Java or the ABAP stack.
Receiver Determination
Interface Determination
Message Split
Message Mapping
Technical routing
Call Adapter
Also can anyone please provide links relating to the PI architecture diagram describing it from ABAP and Java Stack Perspective and not from the Components perspective i.e. Integration Repository and Directory.
Thanks.
Kiran

Hi
Tha ABAP stack consists of the Integration Server which in turn contains your Integration Engine and Business Process Engine.
The J2EE stack contains the Adapter Engine and your IR and ID run on the J2EE engine.
Most of XI pipelines happens in the ABAP stack.
All messsages picked by the Adapter Framework running on the J2EE engine are passed to the Integration Engine, which does the routing. The mapping program again gets executed on the Java stack and the rest of the pipeline servies are executed again on the ABAP stack and so on.
Message, Java & XSLT (under Imported Archives) mappings are executed at Java stack;
ABAP & XSLT (in ABAP stack) mappings are executed at ABAP stack.
PI Architecture look threads
Architecture
/message/5802842#5802842 [original link is broken]

ABAP Objects and BADI

HI
Can anyone give me the link for ABAP Objects and BADI'S.
I would like to have ABAP Objects with Example as well as BADIS.
Please tell me as iam new to those.
Thanks in advance

Hi,
ABAP objects have an elaborated list plz mention specific objects u want to know.
These are few of the links which I got through the sdn.sap for the objects like ALV,LSMW,IDOCS, etc..
Start with this.Refer this
For BDC:
http://myweb.dal.ca/hchinni/sap/bdc_home.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
call Transaction or session method ?
http://www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_DATADICTIONARY_FAQ.html
http://www.****************/InterviewQ/interviewQ.htm
http://help.sap.com/saphelp_46c/helpdata/en/35/2cd77bd7705394e10000009b387c12/frameset.htm
Reports
http://www.sapgenie.com/abap/reports.htm
http://www.allsaplinks.com/material.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
Check these step-by-step links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/ccab6730-0501-0010-ee84-de050a6cc287
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/8fd773b3-0301-0010-eabe-82149bcc292e
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/3c5d9ae3-0501-0010-0090-bdfb2d458985
for Smartforms material
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/smartform-tutorial.htm
http://www.sapgenie.com/abap/smartforms.htm
How to trace smartform
http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
http://www.help.sap.com/bp_presmartformsv1500/DOCU/OVIEW_EN.PDF
http://www.sap-img.com/smartforms/smart-006.htm
http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
Re: Need FAQ's
check most imp link
http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SAPScripts
http://esnips.com/doc/1ff9f8e8-0a4c-42a7-8819-6e3ff9e7ab44/sapscripts.pdf
http://esnips.com/doc/1e487f0c-8009-4ae1-9f9c-c07bd953dbfa/script-command.pdf
http://esnips.com/doc/64d4eccb-e09b-48e1-9be9-e2818d73f074/faqss.pdf
http://esnips.com/doc/cb7e39b4-3161-437f-bfc6-21e6a50e1b39/sscript.pdf
http://esnips.com/doc/fced4d36-ba52-4df9-ab35-b3d194830bbf/symbols-in-scripts.pdf
http://esnips.com/doc/b57e8989-ccf0-40d0-8992-8183be831030/sapscript-how-to-calculate-totals-and-subtotals.htm
SAP SCRIPT FIELDS
http://help.sap.com/saphelp_erp2005vp/helpdata/en/d1/8033ea454211d189710000e8322d00/content.htm
scripts easy material
http://www.allsaplinks.com/sap_script_made_easy.html
Debugging Document.
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/84/1f624f4505144199e3d570cf7a9225/frameset.htm
http://help.sap.com/saphelp_bw30b/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
BAPI
http://help.sap.com/saphelp_46c/helpdata/en/9b/417f07ee2211d1ad14080009b0fb56/frameset.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
Checkout !!
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://techrepublic.com.com/5100-6329-1051160.html#
http://www.sap-img.com/bapi.htm
http://www.sap-img.com/abap/bapi-conventions.htm
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sapgenie.com/abap/bapi/example.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
List of all BAPIs
http://www.planetsap.com/LIST_ALL_BAPIs.htm
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sappoint.com/abap/bapiprg.pdf
http://www.sappoint.com/abap/bapiactx.pdf
http://www.sappoint.com/abap/bapilst.pdf
http://www.sappoint.com/abap/bapiexer.pdf
http://service.sap.com/ale
http://service.sap.com/bapi
http://www.geocities.com/mpioud/Abap_programs.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
Go thru these programs they may help u to try on some hands on
ALV Demo program
BCALV_DEMO_HTML
BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode
BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode
BCALV_GRID_DEMO Simple ALV Control Call Demo Program
BCALV_TREE_DEMO Demo for ALV tree control
BCALV_TREE_SIMPLE_DEMO
BC_ALV_DEMO_HTML_D0100
Remote Function Call:
RFC is an SAP interface protocol. Based on CPI-C, it considerably simplifies the programming of communication processes between systems.
RFCs enable you to call and execute predefined functions in a remote system - or even in the same system.
RFCs manage the communication process, parameter transfer and error handling.
http://help.sap.com/saphelp_47x200/helpdata/en/22/042860488911d189490000e829fbbd/frameset.htm.
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
Refer this
http://www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_DATADICTIONARY_FAQ.html
http://www.****************/InterviewQ/interviewQ.htm
http://help.sap.com/saphelp_46c/helpdata/en/35/2cd77bd7705394e10000009b387c12/frameset.htm
http://www.techinterviews.com/?p=198
http://www.techinterviews.com/?p=326
http://www.sap-img.com/abap/answers-to-some-abap-interview-questions.htm
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
http://www.geekinterview.com/Interview-Questions/SAP-R-3/ABAP
http://sap.ittoolbox.com/documents/popular-q-and-a/abap-sample-interview-questions-3240
http://www.sap-img.com/abap/abap-interview-question.htm
http://www.allinterview.com/Interview-Questions/ABAP.html
links for OO ABAP.
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://www.allsaplinks.com/
http://www.sap-img.com/
http://www.sapgenie.com/
http://help.sap.com
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com.
http://www.sapgenie.com/abap/OO/index.htm
http://www.sapgenie.com/abap/controls/index.htm
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
some more materials.
Go through the following Documents Links & Materials for ABAP Objects
check the below links lot of info and examples r there
http://www.sapgenie.com/abap/OO/index.htm
http://www.geocities.com/victorav15/sapr3/abap_ood.html
http://www.brabandt.de/html/abap_oo.html
Check this cool weblog:
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
/people/sap.user72/blog/2005/05/10/a-small-tip-for-the-beginners-in-oo-abap
/people/ravikumar.allampallam/blog/2005/02/11/abap-oo-in-action
/people/thomas.jung3/blog/2005/09/08/oo-abap-dynpro-programming
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b6254f411d194a60000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://www.allsaplinks.com/
http://www.sap-img.com/
http://www.sapgenie.com/
http://help.sap.com
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://www.sapgenie.com/abap/controls/index.htm
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
these links
http://help.sap.com/saphelp_47x200/helpdata/en/ce/b518b6513611d194a50000e8353423/content.htm
For funtion module to class
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5954f411d194a60000e8353423/content.htm
for classes
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5c54f411d194a60000e8353423/content.htm
for methods
http://help.sap.com/saphelp_47x200/helpdata/en/08/d27c03b81011d194f60000e8353423/content.htm
for inheritance
http://help.sap.com/saphelp_47x200/helpdata/en/dd/4049c40f4611d3b9380000e8353423/content.htm
for interfaces
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b6254f411d194a60000e8353423/content.htm
For Materials:
1) http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCABA/BCABA.pdf -- Page no: 1291
2) http://esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
3) http://esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
4) http://esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
5) http://esnips.com/doc/92be4457-1b6e-4061-92e5-8e4b3a6e3239/Object-Oriented-ABAP.ppt
6) http://esnips.com/doc/448e8302-68b1-4046-9fef-8fa8808caee0/abap-objects-by-helen.pdf
7) http://esnips.com/doc/39fdc647-1aed-4b40-a476-4d3042b6ec28/class_builder.ppt
8) http://www.amazon.com/gp/explorer/0201750805/2/ref=pd_lpo_ase/102-9378020-8749710?ie=UTF8
1) http://www.erpgenie.com/sap/abap/OO/index.htm
2) http://help.sap.com/saphelp_nw04/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/07/09/understandingABAPObjects&
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
FOR BADI'S:
Check this blogs 2 find a BADI:
How to find if we have a BADI in Transaction VB02
Re: BADI for screen enhancement in MM01 transaction
Re: BADI and User exits
How To Define a New BAdI Within the Enhancement Framework (Some Basics About the BAdI,BAdI Commands in ABAP,
When to Use a BAdI?)
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
How to implement a BAdI And How to Use a Filter
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
Introducing Business Add-Ins
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f3202186-0601-0010-6591-b832b1a0d0de
How to implement BAdi in Enhancement Framework
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0456c54-0901-0010-f0b3-cd765fb99702
Business Add-Ins
http://help.sap.com/saphelp_47x200/helpdata/en/ee/a1d548892b11d295d60000e82de14a/frameset.htm
BAdI: Customer-Defined Functions in the Formula Builder
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
Difference Between BADI and User Exits
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
To Use BADI - Business Add In you need to Understand ABAP OO Interface Concept
http://www.sap-img.com/abap/business-add-in-you-need-to-understand-abap-oo-interface-concept.htm
You can check the links for Step by Step Badi Implemntation
(very helpful self learning docs).
BADI Step by Step Implementation.
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/63ee7f486cc143a560799d8803ce29/content.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/srm/badi-general+information&
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
The specified item was not found.
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
http://www.allsaplinks.com/badi.html
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-serieshttps:///people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework /people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://www.esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40921dd7-d5cf-2910-1894-bb62316afbd1
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip
http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
http://help.sap.com//saphelp_470/helpdata/EN/eb/3e7cee940e11d295df0000e82de14a/frameset.htm
Difference Between BADI and User Exits
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
Reward Points if found helpfull..
Cheers,
Chandra Sekhar.

How to use abap debugger and se80

can any body give easy deatils about it?

Hi
Debugger
This section of the ABAP Workbench documentation provides information on how to use the Debugger as a test tool for finding errors in the source code of an ABAP program.
Functional Overview
Use
The ABAP Debugger is an integrated test tool within the ABAP Workbench. You use it to check the program logic and to find errors in the source code of an ABAP program. In the Debugger, you can step through the source code of a program. The running program is interrupted after each step, allowing you to check its processing logic and the results of individual statements.
As of Release 6.10, you can also run Business Server Pages (BSP) in the debugging mode. You can also display and set breakpoints here. Business Server Pages can be displayed in the Object Navigator when you select an appropriate application under BSP Application.
Features
The Debugger provides an efficient means of identifying errors in ABAP programs. It contains the following functions:
Ways of starting the Debugger
Choosing different views
Choosing different execution options in the Debugger
Displaying source code in the Debugger
Setting and deleting breakpoints
Setting and deleting watchpoints
Stopping a program at a particular statement or event
Displaying and changing field contents at runtime
Displaying ABAP Objects and references
Displaying and positioning strings
Setting and deleting database locks
Opening the ABAP Editor, or Object Navigator
System settings and runtime warnings
Starting the Debugger
There are two possible strategies for starting the Debugger in the ABAP Workbench:
By setting breakpoints then running the program
By running the program in debugging mode.
Setting Breakpoints
A breakpoint is a signal in a specific line of the program source code. This signal indicates to the ABAP runtime processor to stop the program at the relevant line and start the ABAP Debugger. A distinction is made between static and dynamic breakpoints. For further information about the different types of breakpoints and how to use them, refer to Breakpoints.
Direct Processing
You can start the Debugger without previously having set breakpoints. This is the best procedure to use when you want to test a program right from the beginning. It is also a useful procedure if you are not overly familiar with the program and therefore are not sure where best to set breakpoints. You can start the Debugger as follows:
From the Object Navigator
Select a report or transaction and choose Program ® Test ® Debugging.
From the ABAP Editor
Choose Program ® Execute ® Debugging (or the Debugging pushbutton).
From any screen
Choose System ® Utilities ® Debug ABAP.
From any screen
Enter /h in the command field.
Display Modes in the Debugger
When you are debugging a program, there are various display modes that you can use. All of the display modes have the same structure. The top part of the screen displays an extract of the program source code. The bottom part displays the information specifically available in that display mode. There are also pushbuttons on the screen allowing you to switch to the most frequently-used display modes.
Display Modes Available Using Pushbuttons
Fields
The scrollable field display contains the contents of up to eight fields. The contents of the three most important system fields are always displayed. This is the default display mode in the Debugger. See also Processing Fields
Table
Displays the contents of an internal table. This mode allows you to display and edit the entries in an internal table. See also Processing Internal Tables
Breakpoints
A scrollable display containing up to 30 breakpoints. Next to each breakpoint is a counter. You can also delete breakpoints in this display. See also Managing Dynamic Breakpoints
Watchpoints
You can set a watchpoint for a field so that the program is interrupted whenever the value of that field changes. This display mode contains a list of watchpoints, the fields and programs to which they are assigned, the current values of the fields, and the conditions upon which the watchpoint is activated. See also Setting Watchpoints
Calls
This mode displays the current sequence of events, and the sequence of calls up to the current breakpoint. The last active call is displayed at the top of the list; previous calls are listed in reverse chronological order. When an event (for example, START-OF-SELECTION) concludes, it is deleted from the display.
Overview
This mode displays the structure of the program. It lists its events, subroutines, and modules, and shows which sections belong to which events. It also displays the section currently being processed.
Settings
This mode displays the current Debugger settings. You can change the settings by selecting or deselecting various options. For further information, refer to Settings and Warnings
Other Display Modes
You can access other display modes by choosing Goto ® Display data object.
Single field
Displays the contents and technical attributes of a field.
Structured
field
Displays the components of a structure, along with their contents and attributes. If you double-click a component, the system displays detailed information for it.
Strings
Display the content and current length of the string. You can also display part of the content by means of offset and length.
Internal table
Displays the type, line numbers and contents of an internal table.
Object
Displays the structure of an ABAP Object.
For further information on these displays, refer to Displaying Attributes and Displaying ABAP Objects
Checking System Programs for Errors
To check a program or program component that is part of the ABAP Workbench (for example, the Screen Painter), you must use the system Debugger. To start the system Debugger, choose System ® Utilities ® Debug System from any screen. To stop the system Debugger, choose Debugger ® Debugging off.
Displaying Program Attributes
You can display the attributes Fixed Point Arithmetic, System Program, and Unicode Checks of the program that has just been executed by choosing Goto ® Further Information ® Program Attributes.
Restarting the Debugger
If you choose Debugging ® Restart, debugging mode is stopped and the system takes you to the initial screen of the last transaction you called. If, for example, you started an ABAP program in debugging mode from transaction SE38 (ABAP Editor), choosing Debugging ® Restart will take you back to the screen titled ABAP Editor: Initial Screen. If you want to restart the program in debugging mode, choose Debugging.
Breakpoints
Apart from direct execution of an ABAP program in the Debugger, it is also possible to start the Debugger call by the exact setting of a breakpoint. This is achieved by setting one or more of these breakpoints in the program. A breakpoint is a signal at a particular point in the program that tells the ABAP runtime processor to interrupt processing and start the Debugger. The program runs normally until the breakpoint is reached.
There is also a special kind of breakpoint called a watchpoint. When you use watchpoints, the Debugger is not activated until the contents of a particular field change. For further information, refer to Watchpoints.
Breakpoint Variants
The Debugger contains different breakpoint variants:
Static
The BREAK-POINT statement in an ABAP program. Static breakpoints are not normally user-specific. However, you can make them user-specific.
Directly-set
dynamic breakpoints
Can be set in the ABAP Editor or the Debugger. Dynamic breakpoints are always user-specific, and are deleted when you log off from the R/3 System.
Breakpoints
at statement
The Debugger stops the program directly before the specified statement is executed.
Breakpoints
at subroutine
The Debugger stops the program directly before the specified subroutine is called.
Breakpoint at function module
The Debugger stops the program directly before the specified function module is called.
Breakpoint at method
The Debugger stops the program directly before the specified method is called.
Breakpoints at system exceptions
The Debugger stops the program directly after a system exception, that is, after a runtime error has been intercepted.
Static Breakpoints
Static breakpoints are not normally user-specific. Once a user has inserted the statement BREAK-POINT or BREAK name in an ABAP program, the system always interrupts the program at that point for that user or only for the user name. This procedure is only useful in the development phase of an application, when the program execution is always to be interrupted at the same place. For further information, refer to Static Breakpoints.
In HTTP sessions, a static breakpoint is skipped if you did not set additional dynamic HTTP breakpoints in the editor of a BSP page. Instead, a corresponding system log entry is written, which can be checked using transaction SM21.
Dynamic Breakpoints
Dynamic breakpoints are user-specific. Therefore, you should use them if you only want the program to be interrupted when you run it yourself, not when it is being executed by other users. All dynamic breakpoints are deleted when you log off from the R/3 System.
Dynamic breakpoints are more flexible than static breakpoints, because you can deactivate or delete them at runtime. They have the following advantages:
You do not have to change the program code
You can set them even when the program is locked by another programmer
You can define a counter that only activates the breakpoint after it has been reached
Special dynamic breakpoints are useful when you want to interrupt a program directly before a particular ABAP statement, a subroutine, or an event, but do not know exactly where to find it in the source code. Event here is used to refer to the occurrence of a particular statement, for example, or calling up a method. Special dynamic breakpoints are user-specific. You can only set them in the Debugger. For further information, refer to Dynamic Breakpoints.
In HTTP sessions, the system stops both at static and dynamic breakpoints if a dynamic breakpoint was set in the editor of a BSP page before program execution.
Lifetime and Transfer of Breakpoints
A static breakpoint remains intact as long as the BREAK-POINT or BREAK-POINT name statement is not removed from the source code. Without saving, dynamic breakpoints only remain intact in the relevant internal session. However, they are effective during the entire user session, if they are saved by choosing Breakpoints ® Save in the ABAP Debugger. For more details on the subject of sessions and user sessions, refer to Modularization Techniques in the ABAP keyword documentation.
If you call an HTTP session during a user session, only the HTTP breakpoints are loaded when the HTTP session is started. You activate HTTP debugging in the ABAP Editor by choosing Utilities ® Settings ® HTTP Debugging. Depending on the setting, the system then displays either the HTTP or standard breakpoints in the Editor.
If you call an update session during a user session, breakpoints that were defined beforehand in the calling processing unit are copied to the new update session, where they can be displayed under Breakpoints. If, in the ABAP Debugger, you check Update Debugging under Settings and then, for example, call the update module func using CALL FUNCTION func IN UPDATE TASK, a new window is opened in which you can debug this function module in the update session. All the breakpoints that were set in the calling processing unit can also be processed here.
Breakpoints at Statements
You can use this special kind of dynamic breakpoint to interrupt a program directly before an ABAP statement is processed.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint at an ABAP statement:
1.Choose Breakpoint ® Breakpoint at ® Statement...
The following dialog box appears:
2.Enter the ABAP statement.
The system sets a breakpoint at all points in the program at which the ABAP statement occurs.
3.Choose ENTER.
The breakpoint applies to all lines containing the specified statement.
Result
The system confirms the breakpoint and adds it to the list in the display. When you finish your debugging session, the breakpoint is automatically deleted unless you have explicitly saved it.
Breakpoints at Subroutines
You can use this special kind of dynamic breakpoint to interrupt a program directly before a subroutine is called.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint for a subroutine:
Choose Breakpoint ® Breakpoint at ® Event/Subroutine.
The following dialog box then appears:
Enter the name of the subroutine before which you want to interrupt the program. By default, the Program field contains the name of the program that is currently active. The system sets a breakpoint wherever the specified subroutine occurs in the program code.
Choose ENTER.
Result
The system confirms the breakpoint. The breakpoint is added to the breakpoints displayed.
Breakpoints at Function Module
You can use this kind of dynamic breakpoint to interrupt a program directly before a function module is called.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint for a function module:
Choose Breakpoint ® Breakpoint at ® Function module...
The following dialog box appears:
Enter the name of the function module before which you want to interrupt the program. The system sets a breakpoint wherever the specified event, module pool, or subroutine occurs in the program code.
Choose ENTER.
Result
If you entered a valid function module name, the system confirms that the breakpoint has been set. If the function module exists in the system, the new breakpoint is added to the display list.
Breakpoints at Methods
You can use this special kind of dynamic breakpoint to interrupt a program directly before a method is called.
Prerequisites
You must be already running the program in the debugger.
Procedure
To set a breakpoint for methods:
1. Choose Breakpoint ® Breakpoint at ® Method...
The following dialog box then appears:
2. Enter the name of the method and class before which you want to interrupt the program. A breakpoint is then set each time the specified processing block appears in the source code.
3. Choose ENTER.
Result
The system confirms the breakpoint. The breakpoint is added to the list in the display.
Breakpoints at System Exceptions
You can use this special form of dynamic breakpoint to interrupt a program immediately after a runtime error has occurred.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint at a system exception:
Choose Breakpoint ® Breakpoint at ® System exception.
Result
The system confirms the breakpoint. The breakpoint is added to the breakpoints displayed.
When a system exception is triggered, a warning triangle appears in the line containing the statement that caused it. If you double-click the warning triangle, the internal name of the runtime error appears.
Static Breakpoints
You should only use static breakpoints during the development phase of an application. You must remove them from your program before you transport it.
Setting Breakpoints
To set a static breakpoint, use the ABAP statement BREAK-POINT . Place the breakpoint in the line at which you want to interrupt the program.
program RSDEBUG_01.
if SY-SUBRC 0.
break-point.
endif.
When you run the program, the runtime processor interrupts it when the breakpoints occur. You can number your breakpoints to make them easier to identify ( BREAK-POINT 1, BREAK-POINT 2 ).
Static breakpoints are not normally user-specific. The program is, therefore, always interrupted as soon as the runtime processor reaches the line containing the breakpoint. The program is interrupted regardless of the user who executes it.
However, you can set user-specific static breakpoints using the BREAK statement followed by your user name. For example, if you use the statement BREAK SMITH , the program is only interrupted when user Smith runs it. Although user-specific breakpoints appear in the program code, they are not active when other users run the program. You should, however, be careful if an application is being used by several users with the same name.
Deleting Breakpoints
Since static breakpoints apply to all users, you must remove them from the program once you have finished testing it. In the ABAP Editor, you can find breakpoints quickly by choosing Utilities ® Global search. You can also use the Extended Program Check to find them.
If you do not remove static breakpoints from your program, they will be transported to your production system. This could cause serious problems in the production system.
Dynamic Breakpoints
You can set up to 30 dynamic breakpoints without changing the program code. Dynamic breakpoints can be set either in the ABAP Editor or directly in the Debugger.
Setting Dynamic Breakpoints in the ABAP Editor
You can set dynamic breakpoints in the ABAP Editor regardless of whether you are in display or change mode. You can also set breakpoints directly from within the Debugger at runtime. To set a dynamic breakpoint in the ABAP Editor:
Position the cursor on the line of the source code at which you want to set the breakpoint.
Choose Utilities ® Breakpoints ® Set or the Stop icon. The system confirms that the breakpoint has been set.
To display a list of all dynamic breakpoints in a program, choose Utilities ® Breakpoints ® Display. You can use this list to navigate to a particular breakpoint or to delete one or more breakpoints from the program.
Setting Dynamic Breakpoints in Debugging Mode
To set a dynamic breakpoint in the Debugger:
Position the cursor on the line in which you want to set the breakpoint.
Select the line by double-clicking it or choosing Breakpoint ® Set/delete.
The system sets the breakpoint, and displays a small stop sign to the left of the relevant line. If the line already contained a breakpoint, it is deleted.
When you finish your debugging session, the breakpoint is automatically deleted unless you have explicitly saved it.
Saving Breakpoints
If you want to leave the Debugger temporarily, you can save your dynamic breakpoints so that they are still active when you return to the Debugger within the same terminal session.
To save the breakpoints that you have set in the Debugger:
Choose Breakpoint ® Save.
The system saves all of the breakpoints that you have set in the current program. These breakpoints will remain active until you either explicitly delete them or log off from the system.
You can also delete breakpoints that you have saved:
By deleting individual breakpoints from the display and then saving again. In this case, only your selected breakpoints will be deleted.
By choosing Breakpoint ® Delete all. In this case, the system deletes all dynamic breakpoints.
Managing Dynamic Breakpoints
The ABAP Debugger provides a convenient user interface for managing breakpoints. To open the breakpoint display, choose Breakpoints, or, from the menu, Goto ® Control debugging ® Breakpoints.
Example
Functions
This display mode contains the following functions for breakpoints:
Breakpoint Display
The scrollable breakpoint display contains up to 30 dynamic breakpoints. For breakpoints that you set directly, the program name and line number at which the breakpoint occurs are displayed. For special breakpoint forms, the list displays the statements, events, subroutines, and module calls at which the relevant breakpoints are set.
Counter
In the breakpoint display, you can specify a counter. When you use a counter, the breakpoint is not activated until it has been reached a specified number of times. For example, if you enter 5 for the counter, the breakpoint is not activated until it is reached for the fifth time. After the breakpoint has been activated, it remains so, and the counter no longer appears in the breakpoint display.
Deleting Breakpoints
Position the cursor on the breakpoint that you want to delete, and either double-click the line or choose Breakpoint ® Set/delete. To delete all breakpoints, choose Breakpoint ® Delete all.
Activating and Deactivating Breakpoints
Position the cursor on the breakpoint that you want to activate or deactivate and choose Breakpoint ® Activate/deactivate.
Watchpoints
Like a breakpoint, a watchpoint is an indicator in a program that tells the ABAP runtime processor to interrupt the program at a particular point. Unlike breakpoints, however, watchpoints are not activated until the contents of a specified field change. Watchpoints, like dynamic breakpoints, are user-specific, and so do not affect other users running the same program. You can only define watchpoints in the Debugger.
Use
You set watchpoints in the Debugger to monitor the contents of specific fields. They inform you when the value of a field changes. When the value changes, the Debugger interrupts the program.
Features
You can set up to five watchpoints in a program.
See also Setting Watchpoints.
You can also specify the conditions on which a watchpoint is to become active.
You can specify logical conditions between up to five conditional watchpoints.
See Specifying a Logical Expression.
You can define watchpoints as either local or global. If you define a global watchpoint, it is active in all called programs. Local watchpoints are only active in the specified program.
You can change and delete watchpoints.
See Changing Watchpoints.
You can use watchpoints to display changes to the references of strings, data and object references, and internal tables.
See Memory Monitoring with Watchpoints
Setting Watchpoints
If you want to interrupt a program when the contents of a field or structure change, use a watchpoint. You can set up to five watchpoints, including watchpoints for strings.
A watchpoint can be either local or global. Local watchpoints are only valid in the specified program. Global watchpoints are valid in the specified program, and also in all the other programs it calls.
Procedure
To set a watchpoint, start the Debugger and proceed as follows:
Choose Breakpoint ® Create watchpoint or the corresponding pushbutton. The Create Watchpoint dialog box appears:
Decide whether you want to set a local or global watchpoint.
Enter the program and the name of the field for which you want to set the watchpoint. In the Program field, the name of the program currently running is always defaulted.
If you want your watchpoint to be activated each time the contents of the field change, the definition is now complete, and you can return to the Debugger by pressing ENTER .
To create a conditional watchpoint, that is only activated when a particular situation arises, choose one of the following relational operators.
Operator
Meaning
<
Less than
<=
Less than or equal
=
Equal
<>
Not equal
=
Greater than or equal
Greater than
You can use the Comparison field option to specify whether the comparison is to be carried out with a value that you specify or with the contents of another field. Depending on your choice from step 6, enter a value or a field for the comparison.
Result
The system confirms the watchpoint and adds it to the list in the display. When you finish your debugging session, the watchpoint is automatically deleted unless you have explicitly saved it.
Specifying Logical Links
If you have more than one conditional watchpoint, you can specify a logical link between them:
OR
Only one of the specified conditions must be met
AND
All of the conditions must be met.
Changing Watchpoints
Choose Goto ® Control debugging ® Watchpoints or the Watchpoints pushbutton to display the watchpoint list. The following dialog box appears:
Choose the pencil icon in the line containing the watchpoint you want to change.
Change the watchpoint attributes in the Create/Change Watchpoint.
Choose ENTER .
Deleting Watchpoints
You cannot delete watchpoints by choosing Breakpoint ® Delete or Breakpoint ® Deactivate/activate. Instead, proceed as follows:
Choose Goto ® Control debugging ® Watchpoints or the Watchpoints pushbutton to display the watchpoint list.
Choose the trashcan icon in the line containing the watchpoint you want to delete.
Memory Monitoring with Watchpoints
You can use watchpoints to display changes to the references of strings, data and object references, and internal tables. By placing an ampersand (&) in front of the object name, you can display the reference in question in hexadecimal format. With internal tables, you can also display the table header by placing an asterisk (*) at the beginning of the name.
&objectname
Displays the references of strings, internal tables as well as data and object references
*itab
Displays the table header of the internal table itab
Example
If a watchpoint is set for the object in question at runtime, the program is stopped as soon as the reference is changed. A short dump can be intercepted in this way to stop the program being terminated when the memory is overwritten.
Analyzing Source Code
The Debugger contains an extensive range of functions that help you to analyze the source code of a program. You can step through the source code of a program in four different ways. For further information, refer to Stepping Through the Source Code
For information about functions within the source code display, see Displaying the Source Code
There are also different display modes that provide various information and display the contents of individual fields, tables, and so on:

ABAP Query and SAP quary

What is the diff between ABAP Query and SAP quary?

Balu,
SAP Query
Purpose
The SAP Query application is used to create lists not already contained in the SAP standard system. It has been designed for users with little or no knowledge of the SAP programming language ABAP. SAP Query offers users a broad range of ways to define reporting programs and create different types of reports such as basic lists, statistics, and ranked lists.
Features
SAP Query's range of functions corresponds to the classical reporting functions available in the system. Requirements in this area such as list, statistic, or ranked list creation can be met using queries.
All the data required by users for their lists can be selected from any SAP table created by the customer.
To define a report, you first have to enter individual texts, such as titles, and select the fields and options which determine the report layout. Then you can edit list display in WYSIWYG mode whenever you want using drag and drop and the other toolbox functions available.
ABAP Query, as far as I Believe, is the use of select statements in the ABAP Programming. This needs a knowledge of Open SQL commands like Select,UPdtae, Modify etc. This has to be done only by someone who has a little bit of ABAP experience.
To sum up, SAP queries are readymade programs given by SAP, which the user can use making slight modification like the slection texts, the tables from which the data is to be retrieved and the format in which the data is to be displayed.ABAP queries become imperative when there is no such SAP query existing and also when there is a lot of customizing involved to use a SAP Query directly.
Check out these links.
http://help.sap.com/saphelp_46c/helpdata/en/35/26b413afab52b9e10000009b38f974/content.htm
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Introduction.asp
Step-by-step guide for creating ABAP query
http://www.sappoint.com/abap/ab4query.pdf
ABAP query is mostly used by functional consultants.
Kindly reward points by clicking the star on the left of reply,if it helps.Kindly close your previous threads if your problem is solved and reward points for helpful answers.
Don't forget to reward if useful...

How to exit from a WebDynpro ABAP application and open another url

Hi Friends,
How to exit from a WebDynpro ABAP application and open another url like (www.yahoo.com) in the same window of the WD4 application on click of a Button?
Regards,
Xavier

Hi,
First of all you should create outbound plug in the window you are trying to exit with plufg type "Exit"
Then create method handler in the view with this code
 data lo_view_cntr type ref to if_wd_view_controller.
 data lo_win_cntr type ref to if_wd_window_controller.
 data: l_parameter_list type wdr_event_parameter_list,
 l_parameter type wdr_event_parameter,
 l_val type ref to data,
 l_val_url type REF TO data.
 field-symbols: <fs> type any,
 <fs_url> type any.
 lo_view_cntr = wd_this->wd_get_api( ).
 lo_win_cntr = lo_view_cntr->get_embedding_window_ctlr( ).
 CREATE DATA l_val type c.
 CREATE DATA l_val_url type string.
 ASSIGN l_val->* to <fs>.
 ASSIGN l_val_url->* to <fs_url>.
 <fs> = 'X'.
 <fs_url> = 'http://your-link.com'.
 l_parameter-name = 'URL'.
 l_parameter-value = l_val_url.
 INSERT l_parameter INTO TABLE l_parameter_list.
 lo_win_cntr->if_wd_view_controller~fire_plug( EXPORTING plug_name = 'EXIT_PLUG'
 parameters = l_parameter_list ).
 You can easily change this logic to exit application instead of redirecting to the site
 just changing to
 l_parameter-name = 'CLOSE_WINDOW'.

Need knowledge on sap upgrade 4.7 to ecc 6.0 in abap reports and sap query

please give me some ideas and useful links on sap upgrade 4.7 to ecc 6.0 in abap reports and sap query

Hi Jaya,
Not very clear with your question.
Are you looking for changes in areas od ABAP reports & SAP query when we upgrade SAP from 4.7 to ECC 6.0 ??
If the response is YES, then please refer to SAP solution browser www.sapsolutionbrowser.com
Define source release and target release .
You will get module wise details on new features for target release.
Hope this helps.
Regards,
Deepak Kori

ABAP Certification and Course

Hi Friends ,
I want to do ABAP Certification and want to learn ABAP .
I am a BE Computer Engg. (Fresher) having good core knowledge in Core JAVA.
Can anybody give me contacts (Names , number ect. ) of Instituts offering the ABAP course.
If Possible in Pune , Mumbai and Haydarabad .
Thanks and Regards,
Nikhil

Here are the details u asked for
SAP Consultant Certification
Development Consultant SAP NetWeaver 2004 Application Development Focus ABAP
Software components: SAP Web Application Server 6.40
Certification exam is included in course TAW12 and is also offered separately at many SAP locations.
Certification ID (Booking code): C_TAW12_04
Certification duration: 3 hours
Number of certification questions: 80
Courses for certification preparation: TAW10 (ABAP Workbench Fundamentals); TAW12 (ABAP Workbench Concepts)
Please note that you are not allowed to use any reference materials during the certification test (no access to online documentation or to any SAP system).
The certification test Development Consultant SAP NetWeaver 2004 Application Development Focus ABAP verifies the knowledge in the area of the SAP NetWeaver for the consultant profile Application Development Focus ABAP. This certificate proves that the candidate has a basic understanding within this consultant profile, and can implement this knowledge practically in projects.
The certification test consists of questions from the areas specified below:
Topic Areas
1. SAP Technologies
 SAP systems (mySAP Business Suite and SAP NetWeaver)
 Technical structure of an SAP Web Application Server
2. ABAP Workbench Basics (++)
 Data types and data objects (declaration)
 Internal tables
 Data retrieval (authorization check)
 Subroutines
 Function groups and function modules
 Program calls and memory management
3. Advanced ABAP (++)
 ABAP runtime
 Data types and data objects (usage)
 Open SQL (high-performance programming)
 Dynamic programming
4. ABAP Objects (++)
 Classes and objects
 Inheritance
 Polymorphism (casting)
 Interfaces
 Events
 Global classes and interfaces
 Exception handling
 Shared objects
5. ABAP Dictionary (++)
 Database tables
 Performance for table accesses
 Consistency by means of input check (foreign key dependency)
 Dependency for ABAP Dictionary objects
 Views
 Search helps
6. List Creation Techniques (++)
 Data output in lists
 Selection screen
 Logical database
 Interactive lists
 List creation with the ALV grid control:
 - Simple lists
 - Field catalog
 - Layout
 - Event handling
7. Dialog Programming (++)
 Screen (basics)
 Program interface (GUI title, GUI status)
 Screen elements for output (text fields, status icons, and group boxes)
 Screen elements for input/output
 Subscreen and tabstrip control
 Table control
 Context menu
 Lists in dialog programming
8. Database Changes
 Database updates with open SQL
 LUWs and client/server architecture
 SAP locking concept
 Organize database changes
 Complex LUW processing
 Number assignment
 Change document creation
9. Enhancements and Modifications
 Changes to the standard SAP system
 Personalization
 Enhancements to ABAP Dictionary elements
 Enhancements via customer exits
 Business Transaction Events
 Business Add-Ins
 Modifications
Amount of questions by topic (as percentage of test):
+ = 1 - 10%
++ = 11 - 20%
+++ = over 20%
GENEVOTE and SEIMENS... these are two companies in INDIA which provide sap certification
This link will give you the schedule of training at various locations in india along with course fee's.
http://www.sap.com/asia/services/education/schedule/schedule_IN.htm
Further information can be had from the SAP Education Centre, SAP India Labs, Thapar Niketan, 7/4, Brunton Road, Bangalore-560 025. Ph: 25593554. E-mail: [email protected]
The SAP training partner in Bangalore is Siemens Information Systems Limited, Du Parc, 3rd Floor, Trinity 17, Mahatma Gandhi Road. Ph: 57700001, 98459 94380. Contact persons: Vani Mittal / Sonia Nalini. E-mail: [email protected]
Hope this is helpful

GRC PC 2.5 table for task plan and testlog and its link

Hi,
I want to know the list of tables used and the link between the tables related to GRC PC.
Mainly I need tables involved while creating task plan, test logs. We need to develop a report using this data. We need to know how the tables are linked. We saw some two, three GRPC tables, in which the primary key is GUID. We need to know how this GUID is getting generated and on what basis we can retrieve this information from the tables.
There is one report in report center of GRC PC 2.5. In that selection screen, is it possible to add another filed and based on that retrive data.
Regards,
Karthick S
Edited by: Karthick Sitaraman on Apr 24, 2009 9:55 AM

Karthick,
I can offer the following:
1) SP07 was released on 4/20/2009 and contains a new report "Test Step Status." You might want to look at this report so you don't unnecessarily reinvent the wheel. This would, however, require application of SP07. That report has 42 available fields.....lots of data.
2) The table that contains Test plan Master data is HRP5327.
We previously had minor reporting change required and SAP was able to issue a fix for it. The request was a minor, natural extension of an existing report. Part of the problem is that we have very limited web dynpro ABAP skills in house so development of a report was very time consuming. Another option you might want to look at is BI.
I hope this helps.
Matt

HR-ABAP catsdb and pa0001 link

Similar Messages

Maybe you are looking for