(HR-ABAP) Collision with full day HR Record

Hi,
Each employee has  a planned work shcedule where employee timings are predefined.
When an employee is absent for the day But comes to work after the scheduled absent period for overtime work, In r/3 system such type of entries are allowed where as when posting the time entry to HR it throws the error "collision with full day HR Record".
How should avoid such type errors.I need to record the overtime employee worked in addition to his absence record.
Regards,
Sourya Prakash.

Hi Siddharth,
Spot on
we have implemented the note 1952018 - Entering full-day attendances & it has fixed the issue
thanks a lot
Regards
Rahul

Similar Messages

  • Send appoitment to user with full day event

    Hi!
    I'm trying to send an appointment invitation to multiply user(addresses).When one of the user already got a full day event in he's/she's calendar, the invitation don't even show in the user's inbox and that user will not know about the appointment.
    But when an user just got some stray appointments that day the invitation will appear in the user's inbox and she/he has the chance to accept/decline the appointment. Is this a known issue? Have i missed something?
    //Erik

    I have not heard of such a thing.
    What does the SOAP trace show?
    Thanks.
    Preston
    >>> On Tuesday, March 24, 2015 at 8:26 AM,
    tavemark<[email protected]> wrote:
    > Hi!
    >
    > I'm trying to send an appointment invitation to multiply
    > user(addresses).When one of the user already got a full day event in
    > he's/she's calendar, the invitation don't even show in the user's inbox
    > and that user will not know about the appointment.
    >
    > But when an user just got some stray appointments that day the
    > invitation will appear in the user's inbox and she/he has the chance to
    > accept/decline the appointment. Is this a known issue? Have i missed
    > something?
    >
    > //Erik

  • Collision with HR record.

    Dear HR Experts,
    We are using the portal for users to key in their overtime (CATW) or CAT2 in backend. By default, when the users’ key in their time and click on the check entries, the system will check against is there any leave / attendance record on that particular day. If there is any then the system will prompt the error and disallow the user to save the record.
    However what I want now is the system to check against the leave only but not the attendance because the attendance is for display only.
    Therefore I go to SPRO->Cross-Application Components -> Timesheet -> Setting for all user interfaces -> authorization -> create authorization for data entry profiles -> maintain data entry profile. Under the collision with HR, I choose the option no message. This actually deactivates the check against the attendance, but at the same time deactivate the check against the leave (absence). However I want to have the check against leave remain on.
    Any idea how to configure it?
    Thanks
    Regards,
    Bryan

    Hi Julien,
    If you want to allow collisions with HR records, please go to SPRO: Cross Application Components - Timesheet - Specific settings for CATS regular - Recording working time - Set up data entry profiles.
    Double click the relevant data entry profile.
    Change HR collision from Error to warning or no response.
    Regards,
    Dilek

  • After uploading our phones with the latest update, we have noticed that the battery life has deminished considerably.  I now have to charge my phone overnight and two or three times a day. Prior to the update, my battery life lasted me at least a full day

    After uploading our phones with the latest update, we have noticed that the battery life has deminished considerably.  I now have to charge my phone overnight and two or three times a day. Prior to the update, my battery life lasted me at least a full day.  We have several phones in our office and the ones that have updated (4) now have issue holding a charge/battery life. I really liked this phone and can not believe that you are now going to charge us $79 a battery to fix what is most definately a problem with your latest update.  I know other people outside of our company that are having the same problem. Not to mention when I called AT&T it was confirmed to me that they are hearing the same issue and then some from other customers as well.  Your own people, once I talked to them earlier today, told me they are showing a history of issues that are showing up after the update was put in place. Of course she tried to say, "Maybe the age of the battery and the update both contributed".  Whatever. 
    I want you all to know how disappointed I am in your company for the handling of this issue.  I always thought "Apple" was the line I didn't have to worry about having any types of issue. And that you all would stand behined your product 100%. Now I am not so sure.   
    I would love to hear back from your company on how you perceive the issue with all of these phones that prior to the update didn't have any issues and how after the update THEY ARE NOW having issues.  I do not believe this was an issue due to the age of a battery and that was pretty lame to say so.  It was fine and now its not.
    Please feel free to contact me and help me figure out a way to pay for all of the batteries that will be needed for our company to contiue doing business as needed.
    Thank you.
    Web Address (URL):
    5106 McNarney

    Sorry this is a user to user technical forum.  There is NO APPLE here as stated in the term of use when you signed up for this forum.
    here are some battery tips
    http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
    http://www.apple.com/batteries/iphone.html

  • Full-day event created from todo item with one day off

    Can anyone reproduce this?
    1) Create a todo item
    2) In week view, drag-and-drop it to create a full-day event
    Expected Results:
    A full day event is created on the day onto which I dropped the todo item.
    Actual Results:
    The event is created the THE DAY BEFORE the one onto which I dropped the todo item...!?

    Welcome to the Apple Discussions. How photos are separated when imported is set in iPhoto's Events preference pane:
    Click to view full size
    When importing from the Finder, i.e. a folder on the hard drive, all of the photos will be in a single Event unless that checkbox that's pointed to in the screenshot is checked.
    FWIW my workflow is to upload after every shoot to a folder, name the folder to identify the occasion of the photos and import the folder into iPhoto. This gives me an Event with the same name as the folder. I also rename the photos with the international date format for the date the photos were taken: YYYY-MM-DD-001.jpg, -002.jpg, etc. This avoids duplicate file name issues that can crop up at a later date.
    I then have the camera reformat the memory card for the next shoot.

  • 0Employee_Text master data returns 0 records with Full load

    Hi All
    0Employee master data texts returns 0 records with full update. I checked PA0000 table and it has 22K records. I am not sure what is missing.
    Thanks for your help in advance.
    Latha

    Hi again Latha,
    I've been checking the extractor 0EMPLOYEE_TEXT (RSA3 in debbug mode) and it gets data from table view V_BW_PA0001_ENM check if you allready have entries in this database view (it's a view from PA0001 with select condition PA0001-SPRPS eq ''.
    If you have entries here you should get them with the extractor.
    The notes solves extraction problems with several objects (in our case was 0ORGUNIT).
    I hope this helps,
    Regards.
    Carlos.

  • Hello I want to say that apple iphone 5 even has problems with battery consumption. Charge my phone in the morning and sometimes I do not get to the full day. If they could fix this problem I would appreciate. I hope answers.

    Hello I want to say that apple iphone 5 even has problems with battery consumption. Charge my phone in the morning and sometimes I do not get to the full day. If they could fix this problem I would appreciate. I hope answers

    Hello!
    I recently just downloaded the 'Waze' app as a backup for my Garmin. I've read a few reviews that seem to rant and rave about how good the GPS app is. It is community driven and maps are constantly being updated by users. Plus it has a few other fun stuff in it (something similar to Gasbuddy where you can owe prices on the map). But like the person above me said, there is lots of useful free GPS apps in the App Store.
    Oh and I may be wrong but I remember reading an article about Google being slower about updating its maps system--ie no turn by turn voice, which many people have had complaints about.
    Happy Searching!
    Ps - if you switch I wouldn't go to Blackberry.

  • Can it possible for more then 2 days statistical records with Terminal ID

    Hi
    By using ST03N we get 1 month statistical records but we can't find the Terminal-IT. But When we use STAD we get last 2 days information with Terminal ID only
    So can it possible for more then 2 days statistical records with Terminal ID by STAD.
    Any setting / and background job / any other options. Pls suggest.
    Thanks and Advance.
    Tapovardhan Singh
    Edited by: Tapovardhan Singh on May 24, 2008 11:01 AM

    Hi Tapovardhan,
    How can I access statistical records?
    Using transaction STAD you can access the statistics files and display the statistical records. Here is a screenshot of the start screen of STAD.
    *In Business Transaction Analysis -> In Read Interval ->
    Specify the Date and Time (you want to retrieve).*
    Statistical Records Part 4: How to read ST03N datasets from DB in NW2004
    /people/andreas.vogel/blog/2007/04/08/statistical-records-part-4-how-to-read-st03n-datasets-from-db-in-nw2004
    Statistical Records Part 1: Inside STAD
    /people/andreas.vogel/blog/2007/01/12/statistical-records-part-1-inside-stad
    Reward points if this helps
    Regards
    Pragathi.

  • How to get the lock and block occured for the full day

    Hi,
         How to monitor the lock and blocks occurred for the full day? i need to get it by end of the day. is there any script for this?

    Hi,
         How to monitor the lock and blocks occurred for the full day? i need to get it by end of the day. is there any script for this?
    Why would you like to collect information about locks and let me tell you, you cannot collect information about ALL locks which were taken and even thinking about it is pointless.
    Coming to blocking if you have heavy system with huge concurrency there is bound to be blocking which is necessary and good for RDBMS but if the blocking remains for long time then this is a issue.
    There is DMV sys.dm_tran_locks which tell you what all locks are being taken. You can see various examples mentioned in DMV online documentation and can schedule the query to run every 5
    mins and insert its record in table which you can refer at end of the day.
    This task would be made very easy if you have Monitoring tool which gives you information in your mail every time blocking occurs I have Spotlight in my environment.
    If you are looking for doc for troubleshooting blocking  below is one you can refer
    http://support.microsoft.com/kb/224453
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
    My TechNet Wiki Articles

  • When adding event in iCal, the event becomes full-day by default. How to change?

    Also, when de-clicking full-day the events becomes timed 10am-6pm. When changing start time, the end time follows with this 6 hr gap. Not the worst problem to deal with in this world, but...still.  Any way of changing this little detail? I.e. to be able to double click the desired day, getting an event that starts with the current time and a 1 hr gap (as with the old version of iCal, that is).
    Cheers

    Also, when de-clicking full-day the events becomes timed 10am-6pm. When changing start time, the end time follows with this 6 hr gap. Not the worst problem to deal with in this world, but...still.  Any way of changing this little detail? I.e. to be able to double click the desired day, getting an event that starts with the current time and a 1 hr gap (as with the old version of iCal, that is).
    Cheers

  • Creation of ABAP Query- with SQ01.

    Dear Friends,
    Please provide the full notes to create ABAP Queries with the T.code SQ01.
    Thanks & Regards
    Sreehari.

    Dear Frind,
    My Mail ID - [email protected]
    Thanks & Regards,
    Sreehari

  • Adobe programs dont work with Captivate to capture/record

    Hi there.
    I've had problems with Captivate capturing screen recording from Adobe Premier cs5, where it would not show any of the video which was being edited.  I figured this was just the video issue and worked around it by just not showing the video preview for the small thing i was demonstrating, it wasnt a big deal if it was just isolated to this.
    Next I was using Adobe Photoshop and setting up a little demo on how to fill objects.  Captivate did not pick up the cursor, it shows a ugly black box.
    I also want it to pick up the full motion of my mouse cursor in photoshop, but it doesnt come close, so as im narrating how to do something, my actual mouse is not showing at the same time as im saying it which is essential when you are trying to show a way to FILL a certain area of a shape.
    I had plans to do many things with captivate, now it seems i am going to have to switch back and forth with Camtasia, convert to AVI the parts that Captivate does not handle, and then import them into Captivate to make my demonstrations look seemless???
    I have a lot planned for Adove CS5 Flash, is this also going to give me the same problem?
    I have already searched for a solution tot his, and everyone has said that captivate does not capture things where there is overlayed content etc etc...
    This strikes me slightly insane when Camtasia does it so well, and Im using an Adobe program to provide training on Adobe programs...
    If anyone knows any delevopers for captivate on here, can they PLEASE look at this right now as im slapping myself wondering why this is the case and how im going to plan to do all the simulations half with camtasia and half with captivate on Adobe products we use at my work.....
    Oh see the below link around slide 42 to get an example of what im saying here..
    http://www.blcstudents.com.au/tutorials/col-fill/colour-fill.htm
    or you can check out
    http://www.blcstudents.com.au/tutorials/wp/?page_id=35 its at the bottom of the page.
    Anyway im worried about what to be doing at this point, I got captivate for adobe products, not for other products and programs out there.
    Cheers for any help,
    Ben.

    Just out of curiosity, are you able to modify the mouse cursor AFTER doing the captures once you're back in Captivate editing them?
    For example, are you able to select the mouse for the slides where it added this wierd square cursor, then choose the normal arrow cursor from the Properties tabl > Options accordion?
    Or are you able to delete the mouse from these same slides, and add it back again, and then select the cursor you want?
    Have you found that there is nothing you can do to change this particular cursor on these slides?

  • Problem with full-text search in RH8

    Hi All,
    I've just upgraded from RH6 to RH8 (laptop running Windows XP SP3; RH6 still present on the computer but the RH8 setup program did not seem to have a problem with that: identified an earlier version was present, asked for its serial number, and then proceeded).
    RH8 is working just fine, except for one thing: in the WebHelp output I generate, the Search tab displays: "Error: Failed to initialize database".
    As a matter of fact, the generation details in RH8 output view state:
    Processing Full-text-search data...
    Finished processing Full-Text-Search data in 0 sec(s)
    This is the case for legacy projects that RH8 upgraded from RH6, but also when I create a project from scratch in RH8.
    Now, to add to my confusion, before buying RH8, I had downloaded RH8 trial version and installed it on a spare computer (so it would not interfere with my RH6 installation and projects). The tests with this version were OK (hence the decision to buy the upgrade), and guess what: there was no problem whatsoever with full-text search, neither on legacy projects nor on new projects.
    So before I go into the pains of uninstalling / reinstalling (hello registry, it's me again, trying to clean things up ;-), I'd like to know if anyone has any idea why this is happening.
    Just to be clear: The RH8 version I bought and installed was a new download, distinct from the initial trial download.
    The 3 differences between the trial version and the current working version are:
    Trial was on a Vista computer (working version is on XP SP3)
    Trial did not have RH6 present on the computer
    Trial was version 8.0.0.203, whereas the working version is 8.0.2.208 (immediately after it was installed, RH prompted me to install the updates)
    Thanks in advance for any help or advice.

    Hi All,
    Just for the record, IT people here were eventually able to have RH8 full-text search feature working on my laptop by:
    1/ Installing an XP virtual machine from scratch, and then installing RH8 on it (we created a small project and generated the webhelp output, just to make sure the search feature did work in that environment).
    2/ Using a software virtualization application to capture that RH8 install and deploy it on my laptop.
    The problem is not solved, because we still don't know what caused it (conflicting DLLs?), but it looks like we have a workaround - although certainly not a quick and easy one ;-)

  • E71 Birthday/Full Day items ring at 6 am!!! or mid...

    Hi Everyone,
    I have an E71 and use Nokia PC Suite to synch with my Outlook 2007.
    I have no problem whatsoever doing this.. my BT on my laptop works perfectly with the phone and I have no complaints!
    What I DO have a problem with... is the time that reminders start ringing.
    If I set a reminder for a specific meeting, it's fine - it rings 15 minutes before the meeting.
    But BIRTHDAYS and "Full Day" items ring either at 15 minutes to MIDNIGHT (the day before) or at 6 AM!!!!!
    How can I control that BY DEFAULT? I know, I can manually go in and edit each and every item in my calendar, but I'd rather not do that.
    Isn't there a place to set this for ALL meetings? Either it wakes me up at midnight, or 6 am... I need sleep!
    Any advice (other than manually doing it!!) would be greatly appreciated.
    Thanks,
    Amnon

    amnonav wrote:
    Hi Everyone,
    I have an E71 and use Nokia PC Suite to synch with my Outlook 2007.
    I have no problem whatsoever doing this.. my BT on my laptop works perfectly with the phone and I have no complaints!
    What I DO have a problem with... is the time that reminders start ringing.
    If I set a reminder for a specific meeting, it's fine - it rings 15 minutes before the meeting.
    But BIRTHDAYS and "Full Day" items ring either at 15 minutes to MIDNIGHT (the day before) or at 6 AM!!!!!
    How can I control that BY DEFAULT? I know, I can manually go in and edit each and every item in my calendar, but I'd rather not do that.
    Isn't there a place to set this for ALL meetings? Either it wakes me up at midnight, or 6 am... I need sleep!
    Any advice (other than manually doing it!!) would be greatly appreciated.
    Thanks,
    Amnon
    As far as I know you can NOT change the default.  You would have to go in and remove/change the alarm on each item. Using PC Suite is probably the fastest way to do this.
    Sorry.
    E71-2 Grey Steel
    type: RM-357 code: 0569371 FW: 410.21.010
    08-02-2010 Nokia E71-2 (236.06)

  • Subcontract with full payment of excise duty

    hi gurus
    Can any one provide me itutor link of subcontract with full payment of excise duty,import cycle,import under custom bonded ware house
    Thanks in advance
    Roc

    hi
    This is a subcontracting under full payment of duty scenario.
    Refer this link
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/09/ebf138cdd78a4be10000000a114084/frameset.htm
    Subcontracting Under Full Payment of Duty
    Purpose
    This procedure illustrates how you use the system to send materials to your subcontractors for processing using normal excise invoices.
    Prerequisites
    You have created a condition type for manually entering excise duty in the subcontract order. In the standard system, you can use condition type JEXC, maintain in pricing procedure.
    Process Flow...
    1. Create a
    tract order for the subcontractoru2019s services.Enter excise manually in the condition type JEXC & take a tax code for VAT calculation.
    2. Do the transfer posting for the materials that you want to send to the subcontractor.
    3. Create an outgoing excise invoice for the materials by J1IS & J1IV.
    4. You send the materials to the subcontractor, together with the excise invoice.
    5. The subcontractor processes the materials and returns them to you, together with another excise invoice.
    6. Captures the subcontractoru2019s excise invoice, using the purchase order as the reference document.
    7. Do the goods receipt & refer excise invoice in excsie tab.
    8. Posts excise invoice.
    9. The accounts payable clerk posts the subcontractoru2019s invoice.
    for imports
    Import scenario
    To map Import procedure into SAP , follow the following steps :
    1.Create material master of import goods.
    2.Create vendor master record of import vendor and Customs clearing vendor.
    3.Maintain CIN settings.
    4.Maintain J1id.
    5.Maintain Pricing procedure SAP standard JIMPOR..,maintain required conditions..JCDB,JCV1...
    6.Assign the schema to respective import vendor in Purchasing view of VMR.
    7.Create import PO ,check in conditions of JCDB, JCV1 the customs clearing vendor(Indian vendor) and percentage is assigned..This can be done by In condition tab select condtion then click on display,then enter.
    Save the PO.
    8.MIRO --Capture Bill Of Entry.(Commercial Invoice No.,).Customs clearing first .Here CVD will b converted to BED.
    9.Capture Excisse invoice--j1iex.
    10.MIGO.
    12.Post Excise Invoice.
    13.MIRO...Payment to vendor(import vendor)
    http://help.sap.com/erp2005_ehp_01/helpdata/en/95/3ca40a110511d4b5ae006094b9ec21/frameset.htm
    regards
    kunal
    award if helpful

Maybe you are looking for